Problems with Upload record to Infotype 2010 together with Cost Assignment (PREF)

Hi
I create program using your guide
http://scn.sap.com/people/aditya.palekar/blog/2010/01/19/uploading-a-pa-infotype-record-with-cost-assignment
but I have two problems:
If I call method "CALL METHOD ref2->modify_data" is obligatory parameter SECONDARY_RECORD, but I update only infotype 2010 as PRIMARY_RECORD and PREF (I don't have secondary record).
When for secondary_record use same record as primary_record, give me an error. When for secondary_record use null record give me a error.
I try used "ref2->MODIFY_PRIMARY_RECORD" and "ref2->MODIFY_PREF" together, but using method "CALL METHOD g_masterdata_bl->INSERT" updated only last record (in this case is PREF because is call as last method"ref2->MODIFY_PREF")
What InfoType is Secondary_Record for InfoType 2010?
I have problem with NO COMMIT data. Method "CALL METHOD g_masterdata_bl->flush" have a parameter no_commit with two possible options. When I use no_commit = 'X', this commit data even if this do don't commit.
Why still commit data? When this method no_commit data?
Thank you

Similar Messages

How to upload records into Infotype 382(Awards)

Hi,
Could anyone suggest me how to upload records into infotype 382(Awards) of an Employee.
For solutions points rewarded.
Regards,
Radhu

Hi
you can develop a BDC for transaction PA30
using infotype 382.
(or)
can upload using batch input recording in LSMW.
regards,
Thangesh

BPC NW SP5 with Windows 7 and Office 2010 - issues with EvDRE reports

Hi All,
We are facing a BPC front end issue with the following symptoms:
1. Any report with multiple EvDREs crashes out either instantly or within a few minutes of operation.
2. Two EvDRE reports (or one report and one input tempate) crashes same as above.
The crash is either an EvDRE error message or an endless wait for the server to respond (where we have to eventually terminate the application).
We were suggested to move to sp7 but the issues persisted.
We do have a message and SAP is helping us investigate. What I want to understand from everyone is are there customres successfully using this combination (BPC NW SP5 Windows 7 and Office 2010) along with the above features?
Customer is really loosing confidence in the solution and is eager to find out if we are the only one using this.
Regards
Anupam

Hi Zach,
While I do understand we need to isolate the problem but testing on different combinations, customer at the moment is not inclined for this and is looking for other customer references that this environment is stable.
Regards
Anupam

Problem while uploading data in infotype 2

Hi All,
I made BDC to upload required fields in infotype 2. I use text file to upload all the data.
Currently i have only one record in text file for testing purpose. When i run the report in foreground for that record it goes to the pa30 screen which i have accessed recently. It means if i access pa30 for emp. code 123 then my bdc update the records for emp. code 123 and if i access emp. code 456 after that through pa30 then my program is updating records for emp. code 456. Can you please tell me why it is happening.
Thanks.

Hi,
In PA30, the field for PERNR on screen, gets default value as per last used PERNR.
So, in BDC, we should make sure that the screen field is populated by our value from the file. Just check your bdc code, and make sure the field
RP50G-PERNR
gets the value from the file.
Regards,
Amit Mittal.

Project Server 2010 - Issue with correct recording of timesheet actual hours with decimals

We have Project Server 2010 and are using the timesheet functionality for recording resource times/costs in the schedules.
It has come to light only recently, that for one user, suddenly the times she is entering are not being summed up correctly. An image of her timesheet and the manage timesheet screens are shown below. Note she entered 9.5 hrs but the total that
appears in the manage timesheet screen is 9.514hrs.
If you look at the history of the previous weeks as well, the weird change toi the total hours has occurred in the previous 4 weeks as well. I have no idea why this has started happening and am not aware of any change to the resource's details (apart
from a change to her hourly rate).
Has anyone experienced this before?
Thanks
Peter

We have this issue and are past the patch that discussed decimal rounding (April 2014, though it was more related to the application of resource rates). This seems different from that noted rounding problem.
We have at least three users (out of 625) that have this problem every week and it isn't always the same users. If we re-enter the time and zero fill the cells for the problem task it will fix it.
It is almost like when a user deletes a value that it is leaving residual numbers in the field.
Our 2010 server version below which is through Sept 2014 CU:
14.0.7132.5000
Any help on this would be appreciated.
Thanks!

Replace audio with separately recorded audio and sink it with video and original audio

I have recorded the audion with a high quality digital recorder. How do I replace the audion taken with my video camera? and make sure it is in sink with the video.

Once you have followed Steve's steps, to adjust the sync perfectly, see this article: http://forums.adobe.com/thread/436751?tstart=120
Now, some users have found that their cameras, and their separate audio recorders do not sync 100%. With today's technology, they certainly should, but camera and recorder companies do not see to care, so leave the task to the editor. One user found that his Zoom recorder was about 0.06% slower than his Panasonic cameras, by trial and error, and critical listening. This was a constant sync error. To correct, he changes the speed of the Audio 1.04%, with Maintain Pitch checked - then it is always perfect. If you find that you cannot maintain perfect sync, explore speed settings for the Audio. If the recorder is a high-quality, the OOS (Out Of Sync) should be constant, and when you find the correction, it should be the same for all projects, so the trial and error should pay dividends.
Good luck,
Hunt

How to load infotype 2010 data in to R/3?

Hi,
I posted the same question earlier but with a wrong subject line.
My question is how can I load infotype 2010 data in to ECC 6.0? I am using PI to convert a flat file, but depending on the feature available on R/3 side(either IDOC, BAPI, or a flat file) I am going to convert to the required format.
Can anyone tell me what is the best way to push this data in to R/3.
Appreciate your answers.
Thanks
Raju

Sorry My Bad.
Use this BAPI
BAPI_PTMGREXTREMSPEC_INSERT and below id the description of the BAPI.
This method stores the data records in the interface tables PTEX2010 and PTEXDIR. Then, the report RPTEXTPT (External Transfer -> Time Management reads the data from PTEX2010 and stores it in the Employee Remuneration Info infotype 2010. Neither cost assignment nor activity allocation is supported with this method.
You can try these as well.
BAPI_PTMGREXTREMSPEC_INSWACT Insert EE remuneration info in table (with activity allocation)
BAPI_PTMGREXTREMSPEC_INSWCOST Insert external EE remuneration info in table (w/ cost assignment)

How to Unlock a Locked Recoed for Infotype 2010..

Dear Expert,
How can I unlock a locked record from Infotype 2010. When I am using BDC how should I decide which record to select in PA30 once I have passed the date and Employee Number details on the screen.
If on the same date if there are more than one record and if the first one is not locked then the BDC is locking them insted of unlocking it.
Is there any function module which can help me. The Code I have used is as below.
The field SPRPS is coming during recording but bdc gives error stating this field is not there on the screen so could not use this one as well..
IF T_REPORT-INFOTYPE = '2010'.
          PERFORM BDC_DYNPRO USING 'SAPMP50A' '1000'.
          PERFORM BDC_FIELD USING 'BDC_OKCODE' '=LIST'.
          PERFORM BDC_FIELD USING 'RP50G-PERNR' T_REPORT-PERNR.
          PERFORM BDC_FIELD USING 'RP50G-TIMR6' 'X'.
          PERFORM BDC_FIELD USING 'RP50G-BEGDA' TEMP_BEGDA.
          PERFORM BDC_FIELD USING 'RP50G-ENDDA' TEMP_BEGDA.
          PERFORM BDC_FIELD USING 'RP50G-CHOIC' '2010'.
          PERFORM BDC_FIELD USING 'RP50G-SUBTY' T_REPORT-LGART.
         PERFORM BDC_FIELD USING 'P50G-SPRPS' 'X'.
          PERFORM BDC_DYNPRO USING 'MP200000' '3450'.
          PERFORM BDC_FIELD USING 'BDC_CURSOR' 'P2010-BEGDA(01)'.
          PERFORM BDC_FIELD USING 'BDC_OKCODE' '=EDQ'.
          PERFORM BDC_FIELD USING 'RP50M-BEGDA' TEMP_BEGDA.
          PERFORM BDC_FIELD USING 'RP50M-ENDDA' TEMP_BEGDA.
          PERFORM BDC_FIELD USING 'RP50M-PAGEA' ' 1'.
          PERFORM BDC_FIELD USING 'RP50M-SELE2(01)' 'X'.
          PERFORM BDC_DYNPRO USING 'MP200000' '2450'.
          PERFORM BDC_FIELD USING 'BDC_OKCODE' '/00'.
          PERFORM BDC_DYNPRO USING 'MP200000' '2450'.
          PERFORM BDC_FIELD USING 'BDC_CURSOR' 'P2010-LGART'.
          PERFORM BDC_FIELD USING 'BDC_OKCODE' 'UPD'.
Unlock the Details to the R/3 using Tcode PA30.
          CALL TRANSACTION 'PA30' USING BDCDATA MODE 'P' MESSAGES INTO MESSTAB.
Regards,
Vidya..

first of all, use a BAPI instead of BDC.. HR_MAINTAIN_MASTERDATA
you may have to do some up-front logic to determine which records to unlock, if necessary.
EDIT: that is a FM, not BAPI.
Edited by: robert phelan on Mar 16, 2009 8:57 PM

Fetch and peak detection all channels of PXI-5105 with 4M record... HELP!

Dear collegaues!
Please help me to improve performance my application, see attachment, and sorry for my English.
So, my task is to fetch and peak detection all (eight) channels of PXI-5105 with 4M record and sample rate 4M with loop 1 sec...
Inputs of all my channels are wiring to NaI detectors with 0,5...1 microsec of pulse width (really) and freq from 0 kHz to no more than 40 kHz.
Why I've selected 4M record and 4M sample rate namely? Answer is that I've tested PXI-5105 previously by generator 40 kHz and 0,5 microsec width pulse. It is working fine and peak detection indicate for me 40000 pulses/sec. If I set lower than 4M record and 4M sample rate it is no working. In my honest opinion 4M record and 4M sample rate are very min settings.
In the present time peak detection working only 6 channels... When I've connected to diagram more than 6 "peak detector.vi" - I see the error "...out of memory...".
Please advise me, what is to be done for that is all working fine.
Solved!
Go to Solution.
Attachments:
consumer-producer7.vi ‏44 KB

What you are running into is an out of memory error in LabVIEW. You have enough onboard memory to capture 4M samples per channel on the digitizer. The issue is with fetching and manipulating that data in your LabVIEW application. You will want to step back and take a look at how you are handling your data to understand why that is happening.
1) 4M samples/ch = 4M Samples x 2Bytes/sample/ch = 8M Bytes/ch
2) Expanding to 8 channels creates 64M Bytes of data in the raw binary format
3) You are scaling your data by fetching in a 1D WDT format. This stores each sample in a 32 bit double, expanding the memory to 256M Bytes (in addition to timing information)
4) By splitting up the array of waveforms and branching data it you can easily create copies of this data, and if your consumer loop is not completed with the last data, you may be trying to capture a whole new set, creating yet another copy.
So you can see that while you have 1.5GB of controller memory, when dealing with large arrays of data you can easily eat up that memory. There are several things you can try to make your application more efficient. You could work with an unscaled binary data format, you can wire the array of waveform directly to the peak detect vi (instead of creating 8 copies, you will have a single copy with arrays of output) or you could revisit the record size you have chosen (experimenting with your threshold and width settings might help you to get the results you want with smaller record lengths).
-Jennifer O.

Problem while inserting a record to infotype 416

Iam facing a problem while inserting a record to the infotype 416 for a personnel no using the FM 'HR_INFOTYPE_OPERATION'.I have created a FM to insert a record to the infotype 416.In that FM iam using the FM 'HR_INFOTYPE_OPERATION' to create a record for infotype 416.while executing my FM the FM 'HR_INFOTYPE_OPERATION' is returning the return value 0.But when i check in PA30 for the infotype 416,there is no record created for that personnel no.Also in the table PA0416 the record is not get created.SO what might be the problem.can anyone please provide me help on this.
I have attached the code of my FM for ur reference.
FUNCTION Y_ESS_FL_ENCASH.
DATA: G_COMPENSATION_AMOUNT LIKE PA0416-AMONT,
 G_RETURN TYPE BAPIRETURN1.
DATA T_PA0416 LIKE P0416 OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'HR_READ_INFOTYPE'
 EXPORTING
 TCLAS = 'A'
 PERNR = '00000014'
 INFTY = '0416'
 BEGDA = sy-datum
 ENDDA = sy-datum
 BYPASS_BUFFER = 'X'
 LEGACY_MODE = ' '
IMPORTING
 SUBRC =
 TABLES
 INFTY_TAB = T_PA0416
EXCEPTIONS
INFTY_NOT_FOUND = 1
OTHERS = 2
 LOOP AT T_PA0416
 WHERE SUBTY = '1002'.
 ENDLOOP.
 IF SY-SUBRC <> 0.
 CALL FUNCTION 'BAPI_EMPLOYEE_ENQUEUE'
 EXPORTING
 NUMBER = '00000014'
 IMPORTING
 RETURN = G_RETURN.
 IF SY-SUBRC <> 0.
 MESSAGE I016(RP) WITH ' RECORD IS ALREADY LOCKED'.
 ENDIF.
 T_PA0416-PERNR = '00000014'.
 T_PA0416-SUBTY = '1002'.
 T_PA0416-INFTY = '0416'.
 T_PA0416-OBJPS = ''.
 T_PA0416-SPRPS = ''.
 T_PA0416-SEQNR = ''.
 T_PA0416-AEDTM = SY-DATUM.
 T_PA0416-UNAME = SY-UNAME.
 T_PA0416-ENDDA = SY-DATUM.
 T_PA0416-BEGDA = SY-DATUM.
 T_PA0416-NUMBR = '10'.
 T_PA0416-WGTYP = '1530'.
 T_PA0416-AMONT = '15000'.
 T_PA0416-WAERS = 'INR'.
 T_PA0416-QUONR = '1'.
 APPEND T_PA0416.
 CALL FUNCTION 'HR_INFOTYPE_OPERATION'
 EXPORTING
 INFTY = '0416'
 NUMBER = '00000014'
 SUBTYPE = '1002'
OBJECTID =
LOCKINDICATOR =
 VALIDITYEND = '31129999'
 VALIDITYBEGIN = SY-DATUM
 RECORDNUMBER = ''
 RECORD = T_PA0416
 OPERATION = 'INS'
 TCLAS = 'A'
DIALOG_MODE = '0'
 NOCOMMIT = 'X'
VIEW_IDENTIFIER =
SECONDARY_RECORD =
 IMPORTING
 RETURN = G_RETURN.
KEY =
 IF G_RETURN+0(1) EQ 'E'.
 MESSAGE I086(ZHR) WITH 'Record is not inserted in IT416'.
 ELSE.
 COMMIT WORK.
 ENDIF.
 CALL FUNCTION 'BAPI_EMPLOYEE_DEQUEUE'
 EXPORTING
 NUMBER = '00000014'
 IMPORTING
 RETURN = G_RETURN.
 ENDIF.
ENDFUNCTION.

Hi Murthy
With a first glance, I think you have given a wrong parameter value to "validityend". It should be '99991231' not '31129999' .
If your problem still persists, try inserting the data online from PA30. If your input causes no errors, then please state what the return parameter contains.
Regards
*--Serdar <a href="https://www.sdn.sap.com:443http://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.sdn.businesscard.sdnbusinesscard?u=qbk%2bsag%2bjiw%3d">[ BC ]</a>

Problems while uploading Task List - Service Pack with LSMW

We are trying to upload General Maintenance Task List using LSMW. We are using Standard Batch/Direct Input method with Object 0490.
We need to upload task list header, operations, maintenance pack, component and service pack for operations.
We have created separate files containing data for different structures and they are linked using Group, group counter and operation number according below
Header
|----Operations
.......... |----Long Text
..........|----Maintenance Pack
..........|----Components
..........|----Service Pack
We have multiple operations per task list and multiple services per operation. The service pack is required only for a specific control key - PM03. As per the configuration this screen (PROGRAM - SPLMLSP, Screen Number - 0200) is accessible only when the value PM03 is entered in the operation. We are able to upload all other details except service pack details. We have tried using structure IBIPBDCD for the same.
While uploading the task list in foreground, when control key is entered as PM03 in an operation, service pack screen is displayed with error u201CNo batch input data for screen SAPLMLSP 0200u201D. The data provided in structure IBIPBDCD does not get processed at this time.
On exiting the screen using back button, the data in IBIPBDCD structure is passed incorrectly to fields in screen 3400 (SAPLCPDI)
Are we doing something incorrect? Is there a way to use this standard functionality to upload task lists with service packs?
Thanks
Edited by: jvalitp on Dec 15, 2011 12:46 PM

Hi,
When loading the tasklists you need to define a source structure as per the IBIP structure. You have different levels for example level 1 - header then below that level 2 - Operations, Header Long text then below that you have level 3 - Operation Long text, Operation Package assignments, operation component allocation.
For each of these levels you need an identifier that links then together. In your source file specify identifier 1 for header, Identifier 1 and Identifier 2 for operations, identifier 1 identifier 2 and identifier 3 for packages. This way the system can create the correct structure when it reads the data from the text file.
The identifiers are numeric and will dissapear once the files are loaded. specify then in the source structure as 2 characters and remember to set the xcel file up to have a 2 character field.
For the header file each line will be a new identifier 1,2,3,etc.
The operations are assigned to the header and have 2 identifiers. The first corresponds to the header identifier the next is a sequential number stating at 1 and incrementing for each line e.g Header 1 op 1, header 1 op 2, header 2 op 3, header 2 op 4, header 2 op 5 (this would be 2 header records. The first with 2 operations on it the second with 3 operations)
The package is assigned to the operation and as such needs to have a third identifier. Header (identifier 1), Operation (identifier 2), Package (identifier 3) Example Header 1 op 1 pack 1, header 1 op 2 pack 2, header 2 op 3 pack 3, header 2 op 4 pack 4, header 2 op 5 pack 5
I have a loading file for each of the items i.e. Header file, Operation file, maintenance package file. This is then assigned to the respective source structure.
Regards,
ravi

Problem with voiceover recording

When I try to do a voiceover on a completed movie, it abruptly stops and I get the message: "The disk responded slowly. It may have been interrupted by something, or it may not be fast enough for your movie." The movie is short, about 8 minutes, but quite complicated with much editing, many photos, special effects, transitions, music, etc. I have done many, many movies very successfully, but this is the first time I have tried voiceover.
iMovie Help suggests a disk fragmentation problem. Although I have about 50GB free on my hard drive, would defragging help? Or, could the problem be something else?

GEH,
Another option is to record your voice over outside of iMovie.
The downside is that you can't see picture as you record. But I used this method with a short documentary that I had a written script for and it worked quite well.
I used Audio Recorder* to record the voice over doing multiple "takes" of each section. I then brought the tracks into GarageBand for editing - putting the beginning of take 1 together with the end of take 4 etc.
I next exported the Voice Over in a several short pieces which I brought into and positioned in iMovie.
Might be overkill for what you are doing, but I thought I'd mention it.
Matt
* I used the mic on my iSight camera which can't be used directly with GarageBand so I needed the intermediate step of using Audio Recorder.
You can find audio recorder here:
http://www.versiontracker.com/dyn/moreinfo/macosx/17392

Delta Upload is happening but with 0 records

Dear All,
I have problem with delta upload, Intialize upload is happening but delta upload not picking the records but it is showing status as green but with 0 records eventhough the records are there in the source system.
DataSource : 0CRM_SRV_PROCESS_H
the delta type for the datasource is AIMD (After Images with Deletion ID Using Delta Queue).
I am pulling data from Solution MANAGER.
Please guide..
Thanks,
SGK.

hi SGK,
in crm, check bwa5 and bwa7 ?
check oss note 692195-FAQ: Sales Analytics and CRM-BW data Extraction and go through following
CRM Data source issue with Delta Load( For BW Gurus only)
-> oss note 819570,871930,887724
hope this helps.
Question 3 : The Deltas for my data source are not extracted . What can I do?
Suggestion 3: Please check the following.
Please Check if the services have been generated in transaction GNRWB.
If they are not active(not marked 'X' before their names) then activate the services following the steps here.
Go to transaction GNRWB
Select BUS_TRANS_MSG
Select (on the right, the services) : BWA_DELTA3, BWA_FILL, BWA_queue
Press Generate.
Also check for the following:
1. The delta should have been initialized successfully.
2. Confirm that all Bdocs of type BUS_TRANS_MSG
are processed with success in SMW01.
3. If there are queues in SMQ1 with erroneous status then activate these queues.
In Transaction SMQ1 if there are Queues existing with
names beginning with CRM_BWAn (n is number) then
activate these queues in the same transaction.
4.a)If required activate the datasource
Go to transaction BWA5 > select the required datasource and activate.
4 b) The Delta may not be active ,activate the delta in BWA7 by selecting the name of the datsource and pressing the candle icon for 'activate delta'.
5. In BW system
Go to transaction RSA1 > modeling > infosources > select the infosource > right mouse click on the selected
infosource > choose option replicate datasource
Activate the infosource.
6. Go to the scheduler for the infosource > select delta in the update >choose the option PSA only (in the Processing tab)
> start immediately
Check the entry in the RSA7 in the OLTP(CRM system)

Problem with uploading a file in Clustered Environment

Hi,
I have a problem with uploading a file in a clustered environment. I have an iview component which facilitates an upload action of an xml config file. The problem is that the upload of the modified XML file is reflected only in the central instance of the cluster and not in the dialog instances. The dialog instances hold the old config file.
Is there any solution to upload the file to all the nodes in the cluster.
Thanks
Kiran

Hi,
This is a known problem with clustered environment. Remember that your portal component runs on just on dialog instance and it doesn't automatically have access to the other nodes. However, there are some ways to get around this
1. Use KM to store files. KM is a common repository for all application servers and therefore you needn't worry more
2. Use an external batch oriented product (suresync/robocopy) to synch folders on the different DIs. You basically use your existing portal component, but there is a batch job which makes sure the upload folder is identical on all DIs (however, there is a slight delay depending on how often you run the batch job)
3. Store the files on a shared disk directly from the portal component.
Cheers
Dagfinn

I have an old Mac G5 with OSX 10.5.8 After a crash of my HD, I reinstalled the CS3. At the time of recording I get a window with the message "COMPLETED REGISTRATION" and under "There was a problem sending the informasioni via internet" and still under th

I have an old Mac G5 with OSX 10.5.8
After a crash of my HD, I reinstalled the CS3.
At the time of recording I get a window with the message "COMPLETED REGISTRATION" and under "There was a problem sending the informasioni via internet" and still under three choices to "send back" and "records in a second time "or" never record "and I continue to choose the latter option.
Another problem is that in Bridge (version 2.0.0.975) I can no longer see thumbnails of RAW files from my Canon 40D that I saw before.
Should I upgrade ACR? which is the latest version supported on my Mac?
thank you

Sergio Bellotto if you keep receiving the registration screen then please try accepting the screen in a different User account.

Problems with Upload record to Infotype 2010 together with Cost Assignment (PREF)

Similar Messages

Maybe you are looking for