Problems with using non usa keyboard (Mac OS X 10.6.7)

Hi,
I have MacBook Pro, (Mac OS X version 10.6.7), slovenian keyboard and when i type in Code View or Design View one of slovenian characters (š, č, ć , đ, ž) it is not written correctly. They are all written correctly if i for example write them in Find Window (Edit --> Find and Replace) etc. This is extremly annoying and i don't know what to do. I don't have similar problem with any of other mac programs only with macromedia ones. Any suggestions what can i do?
Thank you in advance for any answers.

Is the language (regional time zones and languages) correctly set? If not then you need to make sure it is Slovenian to matcvh your keyboard.
It is my experience that you can't mix and match the keyboards. For example, you can't use US standard Keyboard on a UK set system because the currency and date formats are all different in these two countries and so the pound sign £ and # will interefere with your work. This is just one example but I am sure there are many. The puctuation marks are all mixed up etc etc.
hth

Similar Messages

Hi Guys, I have a problem with Importing Pictures onto my Mac mini with Lion installed by using a Card Reader, What is the problem here so I can get Pictures onto my Computer. ,

Hi Guys,
I have a problem with Importing Pictures onto my Mac mini with Lion installed by using a Card Reader,
What is the problem here so I can get Pictures onto my Computer. ,

Hi Noob Søren
There are a few things that are confusing in your question.
As far as I know, you dont have to install Time Machine on this OS as it is already installed for you. You only need to connect a hard drive to your computer via firewire or usb, click on the Time Machine icon, Open Time Machine Preference in the drop down menu and select a disk: your connected hard drive.
You can of course reformat this connected device, partition it into a few volumes to organise data if you so wish.
I find it strange that your mac's hard drive is divided into two volumes... perhaps this was created through bootcamp?
You can access the configuration of your hd through Applications/Utilities/Disk Utilities.
Clicking on one of the icons on the right hand panel will bring the details of the contents of your hardDrive and volumes. From there you can decide to erase a partition, reformat etc....
If your hd contains more than one volume, and one of them is empty, you could decide to remove it. Back up all your important data before doing so.
Hope this helps
WN

Problem with the Non-English Characters

Hello,
I have been using Adobe Illustrator but I have a huge problem with the non-english characters with Standart Fonts. With the Professional font's I have no problem with them. But when I'm using any standart font in font folio library I cannot type any "ğ-İ-ş". I can add those letters in fontlab with the glyphs (scedilla, idotaccent, gbreve). Most of the fonts have those letters already prepeared so I dont even have to redraw. But I can't add those glyph to every single font because I dont have that kind of time and patience. Is there any better solution for this? Or is there any font folio pack that all fonts are PRO.
I'm looking forward for your answers
Thanks.

Joel wrote: I'm told that this is the exact difference between Adobe's Standard and Pro fonts — the Pro fonts have additional glyphs, including those necessary for extended Latin script.
Exactly. The Pro fonts have at a minimum the Adobe Western 3 character set, which is essentially western European + Adobe CE.
> Standard fonts just have the basic English character set, with maybe a bit of help for Spanish and French.
A lot more than that!
> You're doing Turkish, right? Adobe's coverage for Turkish in its fonts is not great - some of the Pro fonts have Turkish coverage, many do not.
This is false. Every single Adobe Pro font supports Turkish.
To be clear:
All Adobe Standard fonts support the following languages: Afrikaans, Basque, Breton, Catalan, Danish, Dutch, English, Finnish, French, Gaelic, German, Icelandic, Indonesian, Irish, Italian, Norwegian, Portuguese, Sami, Spanish, Swahili and Swedish.
Adobe Pro fonts support those languages, plus AT LEAST: Croatian, Czech, Estonian, Hungarian, Latvian, Lithuanian, Polish, Romanian, Serbian (Latin), Slovak, Slovenian and Turkish. Some Pro fonts have more language support than this, such as Greek and/or Cyrillic, and additional extended Latin.
See: http://www.adobe.com/type/browser/info/charsets.html
Cheers,
T

HT200169 Having a problem with Logic 9 on a Mac Pro.Working on a lenghty song and apparently session got corrupted.Doesnt let me export tracks,program crashes.Already tried start brand new session with the tracks imported into it but still wont export.Sug

Hello,having a problem with Logic 9 on a Mac Pro.Working on a lenghty song and apparently session got corrupted.Doesnt let me export tracks,program crashes.Already tried start brand new session with the tracks imported into it but still wont export.Suggestions?

Thanks, Ian. Yeah, that's how I do it now...or with the controls in the left side pane. Still, I would have liked that quick on-the-spot edit capability...especially while sketching.
Ian Turner wrote:
Sorry Mark, you are out of luck as it does not do that - it works the same as L8. The way I would achieve that with more accuracy and control would be to route all the tracks you want to fade to a Bus then use volume automation on the bus. To do this you will need to add a standard audio track, then re-assign it using (Control Click on the track header) to the Bus track. You can then automate volume/plugins etc on the Bus track.
Ian

Problems with a non-BT product or service

I have just contacted BT as my down IP Profile has become 30% less than it should be over an approximately 6 month period. This is despite the fact that my line is surprising stable with an average up time of around 14 days and the main disconnection being BT induced profile resets.
I have had this issue three times before. The solution is 1 to 3 Openreach Engineer visits that find no fault and end up with a line reset to up the profile.
This time the Indian call centre rang me, tested the line and found no fault (as expected). They said because of this they could not do anything and suggested I contacted second line support.
I then received the following email
"Problems with a non-BT product or service
Hi,
You recently contacted us regarding a non-BT product or service. We confirmed that your BT Broadband service and equipment were working ok but we were unable to help you with your product/service as it's non-BT.
We recommend that you check your user guide or contact your manufacturer regarding the product/service. Before you do that, check out these links below as they may help you further.
Happy to pay for technical support from BT?
BT has a team of technical experts. For a monthly fee they can help you with a range of problems. Go to www.bt.com/techexperts to find out more and sign up.
I am using a BT supplied OpenReach modem and HomeHub 4 A so other than devices connected to the HH4 all kit is BT supplied.
Can I have some (preferably Moderator) help on this please ?
Solved!
Go to Solution.

DavidM wrote:
Hi vofsanity2,
Thanks for posting. I can look into this for you. Drop me an email with the details. You'll find the "contact us" form in the about me section of my profile. Once I have the details we'll take it from there.
Cheers
David
I am pleased to say that thanks to moderator intervention I was contacted by Kevin who arranged for an OR Engineer visit.
As expected no fault was found and after a line reset to restore my profile to what it should be (actually slightly better) my 30% drop was corrected.
It is fairly clear that if you have FTTC and a connection to the cabinet of 1200-1400metres then the DLM is happy to reduce your line speed but reluctant (if at all) to increase it. This means your profile decreases over time and has to have a manual reset.
The worrying development this time is that now when the helpdesk tests your line and finds line speed and profile match they assume you have a problem with a non-BT product or service where as previously they accepted that a 30% drop in profile was a BT Fault.

Problems with Photoshop cs4 for the Mac

I am having all kinds of problems with Photoshop CS4 for the Mac. When I boot the software it seems to work for a while then, I am unable to open upf a file in Photoshop. I drag a photoshop file over the application icon, the whole screen flickers and nothing happens. I am unable to quit Photoshop as the quit choice is grayed out and command-q will not make it quit. I have to force quit. I can repeat this pattern over and over. What is happening? How do I solve this problem?
--Kenoli

Thanks for the reply. I am using Photoshop 11.0.1. I am using the latest version of Snow Leopard. I have found both Photoshop and Dreamweaver to be pretty buggy for several versions now. My suspicions were that they were really engineered for Windows and never really fully implemented for the Mac. Dreamweaver crashes or hangs on me three or four times a day if I us it all day and does various annoying things like refusing to respond to the delete key after I have used it for a while. I have pretty much stopped using it to some degree for that reason and also because there is other software that does a lot of coding things I do much more directly and simply. Also Dreamweaver always seems to struggle to quit when I tell it to quit (that is, it takes a long time and gets hung up at places before it quits) and once it does quit, I always get a message saying that it has unexpectedly quit (even when I have told it to quit).
The problems with Photoshop (starting with just taking a long time to load) have escalated to the point I described today, which makes it almost unusable. I just reinstalled Snow Leopard to see if there was anything buggy in the system software. I will report if problems go away.
Regarding both the refusal to open image files and the grayed out quit command, made me think something like you, i.e. there was some dialogue box open somewhere. However, I couldn't find anything and I don't use two monitors.
So . . . Adobe just seems to be getting more expensive and more buggy.
Incidentally, why is it still running in Rosetta rather than natively? Adobe now has a real Intel processor to work with.
--Kenoli

I have a problem with using (hotmail)

i have a problem with using (hotmail) , that when i try to use messenger through it , that shown many of pages can not be open , and my contacts are not available , when i contact with Windows Live team to solve the problem they inform me that the problem is with my browser , so i have to ask them about it , and i use Mozilla Firefox 8.0 , so kindly help me to solve this issue

That is a problem with Silverlight
On a Mac, Firefox 4 is a 64 bit application.<br />
Not all plugins support 64 bit and if not then you need to start Firefox in 32 bit mode to use that plugin.
# Close Firefox
# Start the Finder and open the Applications folder
# Right click or control-click the Firefox.app icon
# Select "Get Info"
# Select or Deselect "Open in 32-bit mode"
# Close the "Firefox Info" window
# Restart Firefox

I have a lot of disconnection problems with my bluetooth apple keyboard

can you recommand a bluetooth dongle?
I have disconnection problems with my bluetooth apple keyboard & trackpad. I use windows 7. my pc is ~ 5 meters frpm my keyboard.
BTW - my microsoft mouse works great!
thanks,
gil

Here is an apple article about redeeming digital copies: http://support.apple.com/kb/ht1539

I am going to buy unlocked iphone 5.. i will be going to india nxt months and will stay there for a while... so my question is will i get warrenty in india.. and will there be any problem with using indian sims..?? thnx for the help..

i am going to buy unlocked iphone 5.. i will be going to india nxt months and will stay there for a while... so my question is will i get warrenty in india.. and will there be any problem with using indian sims..?? thnx for the help..

The warranty for the iPhone is not and has never been International.
Warranty and support are ONLY valid in the country of origin. The only exception is the EU where the entire EU is treated as one country.
If the device will be used in India, buy it in India.
An unlocked iPhone will work on any supported GSM carrier world wide. The LTE portion of a US purchased, unlocked iPhone is unlikely to work outside North America as it does not support the appropriate bands used in other countries.

I have two Iphones with different email addresses sharing one Apple ID. Will that cause problems with using messaging and FaceTime?

I have two Iphones 5 with different email addresses sharing one Apple ID account.Both are using IOS 8.
I would like to set up a new Apple Id for one of the phones and remove it from the old account.
If I do that, can I move all of the purchased apps and songs to the new Apple account?
Also, will sharing one Apple ID account with two devices cause problems with using messaging and FaceTime?

Sharing an iCloud account between two devices can be done without causing issues with iMessage and FaceTime, just go into Settings for each of these functions and designate separate points of contact (i.e. phone number only, or phone number and unique email address). While that works, you'll then face the problem where a phone call to one iPhone will ring both if on the same Wi-Fi network -- but again, that can be avoided by changing each phone's settings.
Rather than do all that, don't fight it -- use separate IDs for iCloud. You can still use a common ID for iTunes purchases (the ID for purchases and iCloud do not have to be the same) or you can use Family Sharing to share purchases from a primary Apple account.

I purchased Adobe Creative Suite C2 and have been using it for years on the same computer no problem with using it. Recently upon opening Photoshop I received a pop up window saying due to Adobe Software security we need you to activate your CS2 software.

I purchased Adobe Creative Suite C2 and have been using it for years on the same computer without any problems with using it. Recently upon opening Photoshop I received a pop up window saying due to Adobe Software security we need you to activate your CS2 software. I tried, phone activation, web activation, nothing is working. I have the serial number and my Adobe account information. Any suggestions?

Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
Mylenium

Problem with use of COM+ Transaction and DB Transaction

Problem with use of COM+ Transaction and DB Transaction
We build a Web site that use sometime COM+ Transaction and sometime DB
Transaction. If we use a COM+ Transaction and a few seconds later we try to use
a Database Transaction (OracleConnection.BeginTransaction), we get the error
Connection is already part of a local or a distributed transaction
Of course the error does not produce everytime; it takes some try before we get
the problem. And of course, if i use pooling=false on the connection string,
the problem does not appear.
i run the Web page
and push the COM+ Transaction and DB Transaction one after the other for some
times and the problem should appear.
Environment: Windows server 2003, .Net Framework 1.1, ODP.Net 9.2.0.401,
Database Server 9.2.0.4

> Why in form builder can't I...
Is this happening at runtime or at buildtime? You'll need to provide more info on what you are actually doing that's causing the problem.
Regards,
Robin Zimmermann
Forms Product Management

Problems with use cases in JDeveloper 11.1.1.1.0

Use cases made with JDeveloper 11.1.1.0.2 can not be used and edited in JDeveloper 11.1.1.1.0.
Same problems with Use Case Diagrams.
And it seems to be impossible to create new use cases in JDeveloper 11.1.1.1.0.
What are the differences between 11.1.1.0.2 and 11.1.1.1.0 if you look at use cases??

In JDeveloper 11.1.1.0.2 each use case has one file with the folllowing name: *.xhtml_usc.
In JDeveloper 11.1.1.1.0 each use case has two files with a names like *.xhtml_usc and *.uml_usc (after standard migration with JDeveloper). I can still edit the *.xhtml_usc files, but I have no idea what to do with the *.uml_usc files. I can only open a Property-editor, but the properties I see have no relation with the text I used in my original use cases . New use cases only have a *.uml_usc file and a Property-editor. In javadoc the new use case does not appear.
My question is: why do I have two different use case files in JDeveloper 11.1.1.0 and how can I use the Property editor??

AxWindowsMediaPlayer problem with using subtitle sami.file in winform

Hello every body
I have a problem with using sami caption in axWindowsMediaPlayer;
how can I use it?
I used
axWindowsMediaPlayer1.closedCaption.SAMIFileName="FileNameAddress";
and
axWindowsMediaPlayer1.ShowPropertyPages();//and select sami file
but in both ways the subtitle is not shown in my axWindowsMediaPlayer1 control;
please help me for solving this problem

Hi ,
As i know the Synchronized Accessible Media Interchange (SAMI) file must use an .smi or .sami file name extension.
set the smi-file direclty like following
AxWindowsMediaPlayer.closedCaption.SAMIFileName = "subtitles.smi";
Please also refer here
for more details.
Follow the steps below for your Windows Media Player to display captions and subtitles.
http://support.3playmedia.com/entries/21934486-windows-media-files-windows-media-player-settings
Related thread, please note the Style secttion.
http://answers.microsoft.com/en-us/windows/forum/windows_7-pictures/wmp-12-doesnt-play-sami-files-closed-captions/96fe98b7-1cdf-41f5-aa9e-a4e55fd07c0a
In addition, Could you please provide your smi or sami file and full code? It could be better to help us do some test on my side.
Have a nice day!
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I am having problem with using the Basic brush definition

I am having problem with using the Basic brush definition. When I try to click on it will not allow me to use it and will automatically use the 5 pt. oval brush definition. The only way I can use the basic brush is after I have already drawn something and then I have to click on the stroke and then press basic. This is incredibly annoying and if anyone could help I would greatly appreciate it. (I have Adobe CS6)

for whatever reason, the basic 'brush' you see in the brushes palette effectively means removing any brush from a path. to draw with the brush tool you need a brush defined. in your case the last one selected being the 5 pt oval one.

Problems with using non usa keyboard (Mac OS X 10.6.7)

Similar Messages

Maybe you are looking for