Problems writing a PKGBUILD script for scizzor
I wanted to make a package of scizzor (for bmp) ( http://scizzor.sourceforge.net )
But i have kind a problem with the install process.
In my opinion the install.pl script sucks hard.. now i have a problem.
The library generated during the make process should be placed in ~/.bmp/Plugins
Now i don't now how to write this in the PKGBUILD script.
Here my PKGBUILD so far:
pkgname=scizzor
pkgver=1.3.3
pkgrel=1
pkgdesc="Beep Media Player and XMMS effect plugin for pitchspeed control."
url="http://scizzor.sourceforge.net"
depends=('bmp')
conflicts=()
source=(http://belnet.dl.sourceforge.net/sourceforge/$pkgname/$pkgname-$pkgver.tar.gz)
md5sums=('f9c56fb0640e0e825c922472e5799be9')
build() {
cd $startdir/src/$pkgname-$pkgver
make bmp || return 1
# here the problem start
Perhaps someone has an idea...
I hope someone will understand my problem.. my english is not the best
greets
kpiche wrote:
You should be able to replace the mkdirs and cp with:
install -D scizzor-bmp.so $startdir/pkg`beep-config --plugin-dir`/Effect/
See the install manpage. See "mkdir -p" too.
Hi,
thank you
I am totally new to this package creating business :-)
Here the updated PKGBUILD script...
btw: Can i somehow change the package i had put on ftp.archlinux.org/incoming?
PKGBUILD
# Contributor: Daniel Martin <[email protected]>
pkgname=scizzor
pkgver=1.3.3
pkgrel=1
pkgdesc="Beep Media Player effect plugin for pitchspeed control."
url="http://scizzor.sourceforge.net"
depends=('bmp')
conflicts=()
source=(http://belnet.dl.sourceforge.net/sourceforge/$pkgname/$pkgname-$pkgver.tar.gz)
md5sums=('f9c56fb0640e0e825c922472e5799be9')
build() {
cd $startdir/src/$pkgname
/usr/bin/patch -p1 < $startdir/beep-patch-1.3.3
make bmp || return 1
#### thanks to kapiche who helped me with the next part
install -D scizzor-bmp.so $startdir/pkg`beep-config --plugin-dir`/Effect
Similar Messages
-
PKGBUILD script for Gambas SVN
Hi!
Some time ago I found an old PKGBUILD script for Gambas SVN that I've successfully used to make and install Gambas with. The problem with this is that it builds Gambas as one package, while it is recommended to build it like the stable version as done in the arch Community repo: https://www.archlinux.org/packages/?q=gambas. One important reason for this is that install packages created by the Gambas IDE depends on these individual packages to install.
I was wondering if someone could direct me how to make a PKGBUILD script for Gambas SVN that does this? There are some directions on the Gambas Wiki here: http://gambaswiki.org/wiki/howto/packageHead_on_a_Stick wrote:
jerik wrote:I was wondering if it would be possible to have a look at the PKGBUILD file that is used?
You can use the ABS to download the PKGBUILD for the (many) Gambas packages available.
Oh, OK It is very strange, but $ sudo pacman -S abs told me that the package did not exist, so I downloaded it from the arch website and installed it.
Then, now when I run it, this happens:
# abs
==> Downloading tarballs...
==> core...
==> ERROR: Download failed
==> extra...
==> ERROR: Download failed
==> community...
==> ERROR: Download failed
==> multilib...
==> ERROR: Download failed
Last edited by jerik (2014-12-26 00:31:50) -
Problem writing a sql query for a select list based on a static LOV
Hi,
I have the following table...
VALIDATIONS
ID Number (PK)
APP_ID Number
REQUESTED Date
APPROVED Date
VALID_TIL Date
DEPT_ID Number (FK)
I have a search form with the following field item variables...
P11_DEPT_ID (select list based on dynamic LOV from depts table)
P11_VALID (select list based on static Yes/No LOV)
A report on the columns of the Validations table is shown based on the values in the search form. So far, my sql query for the report is...
SELECT v.APP_ID,
v.REQUESTED,
v.APPROVED,
v.VALID_TIL,
d.DEPT
FROM DEPTS d, VALIDATIONS v
WHERE d.DEPT_ID = v.DEPT_ID(+)
AND (d.DEPT_ID = :P11_DEPT_ID OR :P11_DEPT_ID = -1)
This query works so far. My problem is that I don't know how to do a search based on the P11_VALID item - if 'yes' is selected, then the VALID_TIL date is still valid. If 'no' is selected then the VALID_TIL date has passed.
Can anyone help me to extend my query to include this situation?
Thanks.Hello !
Let's have a look at my example:create table test
id number
,valid_til date
insert into test values( 1, sysdate-3 );
insert into test values( 2, sysdate-2 );
insert into test values( 3, sysdate-1 );
insert into test values( 4, sysdate );
insert into test values( 5, sysdate+1 );
insert into test values( 6, sysdate+2 );
commit;
select * from test;
def til=yes
select *
from test
where decode(sign(trunc(valid_til)-trunc(sysdate)),1,1,0,1,-1)
=decode('&til','yes',1,-1);
def til=no
select *
from test
where decode(sign(trunc(valid_til)-trunc(sysdate)),1,1,0,1,-1)
=decode('&til','yes',1,-1);
drop table test; It's working fine, I've tested it.
The above changes to my first idea I did because of time portion of the DATE datatype in Oracle and therefore the wrong result for today.
For understandings:
1.) TRUNC removes the time part of DATE
2.) The difference of to date-values is the number of days between.
3.) SIGN is the mathematical function and gives -1,0 or +1 according to an negative, zero or positiv argument.
4.) DECODE is like an IF.
Inspect your LOV for the returning values. According to my example they shoul be 'yes' and 'no'. If your values are different, you may have to modify the DECODE.
Good luck,
Heinz -
'''php script:'''
<?php
$page = $_GET['page'];
if ($page)
include ("inc/".$page.".php");
else
include ("inc/home.php");
?>
'''Action script 2.0 in flash:'''
on(release){
getURL("index.php?page=new");
}A good place to ask questions and advice about web development is at the mozillaZine Web Development/Standards Evangelism forum.<br />
The helpers at that forum are more knowledgeable about web development issues.
You need to register at the mozillaZine forum site in order to post at that forum.
See http://forums.mozillazine.org/viewforum.php?f=25 -
Help with my first PKGBUILD script [solved]
Hi There
I am trying to write my first PKGBUILD script and I am landing in a bit of trouble. The script is short and is:
#Contributor: iKevin <kellwood-at-ameritech.net>
pkgname=fpm
pkgver=0.60
pkgrel=1
pkgdesc="A password manager for gnome"
url="http://fpm.sourceforge.net"
license="GPL"
depends=('xorg' 'gtk' 'glibc' 'libgnome' 'libxml2' 'glib')
source=(http://heanet.dl.sourceforge.net/sourceforge/$pkgname/$pkgname-$pkgver.tar.gz)
md5sums=(be7655d300c306c8f962f6aad0a60cc5)
build() {
cd $startdir/src/$pkgname-$pkgver
./configure --prefix=/usr
make || return 1
mkdir -p $startdir/pkg/usr/bin
make prefix=$startdir/pkg/usr install
I haven't reach the point where it compiles. It failes to download the file. Oddly, when I type:
wget http://heanet.dl.sourceforge.net/source … .60.tar.gz
it downloads fine. When running makepkg, the contents of ./src/fpm-0.60.tar.gz is some kind of web page.
I have eyeballed this PKGBUILD script for a while and I can't see any problems. Is there something special about sourceforge files? I feel that I must have a typo because makepkg is using wget, which works by hand.
Thanks
KevWell,
I installed kedpm with my first working PKGBUILD script. I was able to import my "fpm" password file. Once I get my gnucash stuff transfered into grisbi, I will be able to switch my main machine completely to archlinux.
I know it is trivial for you guys, but here is my script -- it might save you some typing.
Kev
pkgname=kedpm
pkgver=0.4.0
pkgrel=1
pkgdesc="Ked Password Manager helps to manage large amounts of passwords and related information"
url="http://kedpm.sourceforge.net/"
depends=(python pygtk pycrypto)
makedepends=()
conflicts=()
replaces=()
backup=()
install=
source=(http://dl.sourceforge.net/sourceforge/$pkgname/$pkgname-$pkgver.tar.gz)
md5sums=('6b83a646873f8ea00af9c6403aa259bc')
build() {
cd $startdir
mkdir -p pkg/usr
cd $startdir/src/$pkgname-$pkgver
python setup.py install --prefix=$startdir/pkg/usr -
Shutdown script for awesome wm
I`m writing a shutdown script for my awesome wm.
it looks like this
[c!/bin/bash
ACTION=`zenity --width=90 --height=200 --list --radiolist --text="Select logout action" --title="Logout" --column "Choice" --column "Action" TRUE Shutdown FALSE Reboot FALSE LockScreen FALSE Suspend`
if [ -n "${ACTION}" ];then
case $ACTION in
Shutdown)
#zenity --question --text "Are you sure you want to halt?" &&
dbus-send --system --print-reply \
--dest=org.freedesktop.ConsoleKit \
/org/freedesktop/ConsoleKit/Manager \
org.freedesktop.ConsoleKit.Manager.Stop
Reboot)
#zenity --question --text "Are you sure you want to reboot?" && gksudo reboot
dbus-send --system --print-reply \
--dest=org.freedesktop.ConsoleKit \
/org/freedesktop/ConsoleKit/Manager \
org.freedesktop.ConsoleKit.Manager.Restart
Suspend)
#gksudo pm-suspend
dbus-send --system --print-reply --dest=org.freedesktop.Hal \
/org/freedesktop/Hal/devices/computer \
org.freedesktop.Hal.Device.SystemPowerManagement.Suspend int32:0
LockScreen)
slock
esac
fi
and i makedd it executable with chmod +x. But it sims that she is not working.When i run it as root the script works.And when i run it like user onli suspend semams to working.You don't have to use the deprecated hal! Here are my scripts which I use(d). All you need is
exec ck-launch-session awesome
in your .xinitrc.
shutdown
#!/bin/bash
dbus-send --system --print-reply --dest="org.freedesktop.ConsoleKit" /org/freedesktop/ConsoleKit/Manager org.freedesktop.ConsoleKit.Manager.Stop
reboot
#!/bin/bash
dbus-send --system --print-reply --dest="org.freedesktop.ConsoleKit" /org/freedesktop/ConsoleKit/Manager org.freedesktop.ConsoleKit.Manager.Restart
hibernate
#!/bin/bash
dbus-send --system --print-reply --dest="org.freedesktop.DeviceKit.Power" /org/freedesktop/DeviceKit/Power org.freedesktop.DeviceKit.Power.Hibernate
and suspend
#!/bin/bash
dbus-send --system --print-reply --dest="org.freedesktop.DeviceKit.Power" /org/freedesktop/DeviceKit/Power org.freedesktop.DeviceKit.Power.Suspend
Last edited by Army (2010-12-25 20:42:09) -
JMX script for monitoring JMS servers in a cluster
hi
I am new to writing scripts. I will appreciate if I can get some help in writing a JMX script for monitoring JMS Servers in a cluster a well as monitoring the distributed queues
thanksExact scenario is,
JMS Server
|
DistributedQueue
| |
JMSrvr1 JMSrvr2
Q1 Q3
Q2 Q4
Q1 and Q2 delegateing messages, and at the same time Q3,Q4 also delegating messages.
If JMSrvr1 down, we need to merge Q1 and Q2 with JMSrvr2. Here we cannot migrate as, JMSrvr already have queues. We need to merge all these queues.
Thanks and Regards,
Narayana Moorthy. -
Pkgman - a bash script for local package and PKGBUILD management
hi all,
here is a script which manages a local repository and lets you edit
PKGBUILDs and other related files, automatically generates checksums,
build packages, add them to your local repo and so on.
it also has AUR support for submitting tarballs, leaving comments, etc.
get it from here:
http://sourceforge.net/projects/pkgman/
and AUR package:
http://aur.archlinux.org/packages.php?ID=17100
you need abs, curl and pacman and optionally namcap and desktop-file-utils.
RTFM online:
http://sourceforge.net/apps/mediawiki/p … n_man_page
first of all copy the pkgman.conf and AUR.conf files from /usr/share/pkgman to ~/.config/pkgman/ or ${XDG_CONFIG_HOME}/pkgman - if ${XDG_CONFIG_HOME} is set,
edit these two files and then run
pkgman --runmefirst
pkgman doesn´t install anything. if you want it just builds the package and moves it to your local repository. install it then with pacman.
it also has no dependency handling. there are many other tools which provide this.
the main intention was to keep track of package versions, different PKGBUILD versions and own AUR submitted tarballs; also to keep a clean local repository and clean build directories.
pkgman is stable now. i´m using it for months without any issues.
however, if there are problems or feedback please post them here.
vlad
changelog:
version 2.4:
*pkgman now respects the PKGDEST and SRCDEST variables from makepkg.conf. (though it still moves the src.tar.gz and .pkg.tar.gz to package backup directory).
version 2.5:
*pkgman uses PKGDEST if SRCDEST not set in makepkg.conf.
version 2.6 -> r26:
*changed version system: version 2.6 is now r26!
*minor changes: > pkgman uses now the $SHELL variable.
> new and more comprehensible manpage description (thanks to bender02)
version r27:
*changed SRCDEST since it's only a cache dir. all files (pkg.tar.gz and src.tar.gz) go to PKGDEST.
version r28:
*added new variable ShellCommand to pkgman.conf. Default is $SHELL.
*One might use an external application (like screen or xterm) to switch to build directory and edit files simultaneously.
version r30:
*minor changes. nothing crucial
r32: *OverwriteExistingPackage isn't used anymore. one can delete it from ~/.config/pkgman/pkgman.conf.
*minor changes
version r33:
*"-l|--list" also shows installed package version and available ABS/AUR PKGBUILD version for given package.
*"-a|--abs" can now also be used with other options (like "-e")
r39: * when backing up src.tarballs it asks whether to backup the source file or not
* more detailed "--list" option - also shows if package is installed or not and available ABS/AUR version
* added prompt to clean up directory after makepkg
* when checking pkg.tar.gz also possibility to check for conflicts with files of already installed packages
* use $PAGER instead of less
* --help directly shows the manpage
* --shorthelp shows a brief usage overview
* added a custom prompt, but only when using bash (is somehow experimental - works fine here for me)
* minor internal changes
* pkgman also reads ~/.aurvote file for getting aur name and password. if one already uses aurvote then there is no need for the
~/.config/pkgman/AUR.conf file.
r40: * new manual page & rewrite of usage function
* both option "--flush" and "--flushall" were omitted in favor of the more versatile "--cleanup" option
* pkgman <packagename> checks now if <packagename> is owned by user
* backup option after each editing
* added license
* minor internal changes
r41: * just small bug fixes, nothing crucial.
r42: * more bugs fixed.
r45: * new options added:
> --listversions: list local and available versions of installed packages from LocalPackages directory
> --getownpackages: synchronize local own packages with AUR
* added new variable in pkgman.conf:
> ListOutputInPager: output of, for example, "--list" or "--own" is piped into $PAGER
* added a new optional dependency "desktop-file-utils" for validating desktop entry files
* also supports now auto-generation of sha sums not only md5
* internal fixes due to AUR interface changes:
> use of json interface
> correct parsing of package category
* added 2 proto files (located under /usr/share/pacman):
> proto.desktop: a template for *.desktop files
> PKGBUILD-lib32.proto: a template for lib32 packages for x86_64
* some code changes and fixes
r46: * added new option to pkgman.conf (AutoGenerateSums).
> if AutoGenerateSums=no then pkgman asks whether to generate checksums or not.
> if set to yes it behaves like in former versions.
r52: * "--getownpackages" with more than 100 packages works again
* added new option "--cachecopy":
For each package in CacheCopyList (new variable in pkgman.conf) get existing package from pacman's cache directory - if
CopyPkgFromCache (new variable in pkgman.conf) is set to yes - and/or create a source tarball of PKGBUILD and related files from ABS -
if CopySrcFromABS (new variable in pkgman.conf) is set to yes - and copy them to package backup directory.
* added new variables to pkgman.conf:
> "CacheCopyList=file" - batch backup file, one package per line - default location is "$HOME/.config/pkgman/package.list".
> "CopySrcFromABS=[yes|no]"
> "CopyPkgFromCache=[yes|no]"
* some bugfixes
* docs completed
* CacheCopyList should look like
package1
package2
#this is a comment
! this too
package3
!package4
r54: * renamed "--listversions" option to "--diffversions". makes more sense!
from the man page:
pkgman --diffversions
Show differing ABS/AUR versions of installed packages from LocalPackages.
r55: * minor changes.
r57: * testing release
* added a new option "--rollback":
"pkgman <packagename> --rollback" - checks http://arm.kh.nu for available package versions,
lets you choose one, fetches the package and
moves it to the <packagename> backup directory (if "--repoadd" is used).
r59: * stable release
* new option "--rollback" (see r57):
it checks http://arm.kh.nu (Arch Rollback Machine) for available package versions,
downloads chosen file and moves it to local repository (if "-r|--repoadd" is used).
* posting files/comments/etc to AUR should work now again.
r65: *stable release
* new option "-M,--meta" to create metapackages and add them and their dependencies to local repository.
it searches for deps inside the backup directories, pacman's cache and if the packages are not available, it tries to fetch the missing
dependencies from the Arch Rollback Machine site (http://arm.kh.nu).
r66: * minor fixes
r68: * some bugfixes
* "--repoadd" and "--Reporemove" now accurately removes old packages from LocalRepository
r69: * small bugfixes when listing packages with similar names
* curl retries now 5 times if connection is not established
r75: * "--cachecopy" does not try to dl sourcefiles when backing up ABS PKGBUILDs
* some work on package splitting
* further internal changes
r76: * minor mistakes with "ln" purged
r79: * mostly small changes
* "--cleanup" now also removes uninstalled packages from LocalRepository
r81 & r80: * added AUR v1.6.0 support (use more json)
* small ARM changes ("--rollback")
r85:
* pkgman supports pkg.tar.xz packages
* some code rewrite, bugs purged (hopefully)
r113:
* pkgman now supports building split packages through makepkg.
If you already use pkgman you need to rerun "pkgman --runmefirst" after updating.
* new "-t,--template" option ("pkgman <packagename> --template <alt. packagename> [--pkgbuildversion <version>] [options]").
Useful to create a new PKGBUILD and use an existing one as a template.
* new option: "--conf /path/to/alternate/conf/file" - Specify another configuration file.
* pkgman now uses ${XDG_CONFIG_HOME}/pkgman or $HOME/.config/pkgman - if first not set - as the default location for its conf files.
r116:
* check inet conection when submitting src tarballs to AUR
* some bugs
* updated manpage on sf
For further details please read the manual page.
Last edited by DonVla (2010-04-28 11:56:59)I'm having some troubles with it (perhaps missing dependencies, and forgotten hardcoded dirs?):
jan@aconcagua 8:20PM ~ % pkgman --runmefirst
/usr/bin/pkgman: line 77: /home/jan/apps/skripte/archscripts/pkgman/share/pkgman/color.bash: No such file or directory
/usr/bin/pkgman: line 1293: initcolor: command not found
/usr/bin/pkgman: line 312: highlight: command not found
/usr/bin/pkgman: line 312: error: command not found
/usr/bin/pkgman: line 313: highlight: command not found
/usr/bin/pkgman: line 313: error: command not found
/usr/bin/pkgman: line 314: highlight: command not found
/usr/bin/pkgman: line 314: error: command not found
/usr/bin/pkgman: line 315: highlight: command not found
/usr/bin/pkgman: line 315: error: command not found
/usr/bin/pkgman: line 317: error: command not found
/usr/bin/pkgman: line 318: error: command not found
/usr/bin/pkgman: line 321: highlight: command not found
/usr/bin/pkgman: line 321: msg: command not found
/usr/bin/pkgman: line 329: list: command not found
/usr/bin/pkgman: line 332: list: command not found
/usr/bin/pkgman: line 332: list: command not found
touch: cannot touch `/bin/.pkgman.registered': Permission denied
/usr/bin/pkgman: line 332: list: command not found
/usr/bin/pkgman: line 332: list: command not found
/usr/bin/pkgman: line 332: list: command not found
/usr/bin/pkgman: line 332: list: command not found
/usr/bin/pkgman: line 332: list: command not found
/usr/bin/pkgman: line 337: msg: command not found
curl: option --output: requires parameter
curl: try 'curl --help' or 'curl --manual' for more information
^C/usr/bin/pkgman: line 209: cleanoutput: command not found
/usr/bin/pkgman: line 209: cleanoutput: command not found
(I terminated with ctrl-c).
EDIT: errors resolved by correcting the path $HOME/apps/skripte/archscripts/pkgman/share/pkgman to /usr/share/pkgman in the pkgman itself.
Last edited by bender02 (2008-05-23 01:28:58) -
Lost all photos on my iPhoto and get the ERROR WRITING TO DISK when trying to reload from Time Machine. iPhoto cannot import your photos because there was a problem writing to the volume containing your iPHOTO LIBRARY . Looking for solution.
Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
First, empty the Trash, if possible.
Triple-click anywhere in the line below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) 2>&- | wc -l | pbcopy
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign ($) to appear.
The output of the command will be a number. It's automatically copied to the Clipboard. Please paste it into a reply.
The Terminal window doesn't show the output. Please don't copy anything from there. -
Problem : tcl script for filter IPSec cosmetic log
Hi all, I would like some advice from anyone who ever see this case. I applied tcl script for filter ipsec error log that log is cosmetic. But my site want to don't see this log from router log. I already create tcl script for filter it out. Ok script can work fine but it more work. It filter other message not just ipsec log out. I check cisco device that support script. How can I fix this problem.
See my detail of script and ios version of router :
script :
# VPN_Error.tcl This script deletes all log messages about VPN error messages
# The script will filter by combination between facility-serverity and mnemonic
# Created on 05-Oct-2012.
set msgs [list {CRYPTO-4-RECVD_PKT_MAC_ERR} {VPN_HW-1-PACKET_ERROR} {CRYPTO-4-RECVD_PKT_NOT_IPSEC} {CRYPTO-4-PKT_REPLAY_ERR}]
set fac_sev_mnem "${::facility}-${::severity}-${::mnemonic}"
foreach msg $msgs {
if { $msg == $fac_sev_mnem } {
return ""
return $::orig_msg
ios router version :
: c2800nm-adventerprisek9-mz.124-25f.bin
: c2800nm-adventerprisek9-mz.124-7b.bin
log information and configuration
When I applied command:
logging filter flash:VPN_Filter2.tcl
logging buffered filtered 4096 debugging
show log file:
router#sh logg
Syslog logging: enabled (11 messages dropped, 1 messages rate-limited,
0 flushes, 0 overruns, xml disabled, filtering enabled)
Console logging: level debugging, 18145 messages logged, xml disabled,
filtering disabled
Monitor logging: level debugging, 428 messages logged, xml disabled,
filtering disabled
Logging to: vty322(2)
Buffer logging: level debugging, 0 messages logged, xml disabled,
filtering enabled (0 messages logged)
Logging Exception size (4096 bytes)
Count and timestamp logging messages: disabled
Filter modules:
flash:VPN_Filter2.tcl
Trap logging: level informational, 47011 message lines logged
Logging to 10.145.0.25 (udp port 514, audit disabled, link up), 47011 message lines logged, xml disabled,
filtering disabled
Logging to 10.247.17.41 (udp port 514, audit disabled, link up), 47011 message lines logged, xml disabled,
filtering disabled
Logging to 10.247.17.45 (udp port 514, audit disabled, link up), 47011 message lines logged, xml disabled,
filtering disabled
--More--
Log Buffer (4096 bytes):
router#
If you have some more information. Please tell me.
Thank you for your adviceIt looks like your script has an error. You have an extra '}'. It should be:
# VPN_Error.tcl This script deletes all log messages about VPN error messages# The script will filter by combination between facility-serverity and mnemonic # Created on 05-Oct-2012.#set msgs [list {CRYPTO-4-RECVD_PKT_MAC_ERR} {VPN_HW-1-PACKET_ERROR} {CRYPTO-4-RECVD_PKT_NOT_IPSEC} {CRYPTO-4-PKT_REPLAY_ERR}]set fac_sev_mnem "${::facility}-${::severity}-${::mnemonic}"foreach msg $msgs { if { $msg == $fac_sev_mnem } { return "" } } return $::orig_msg -
Help in writing scripts for monitoring
Hi All,
I am in the position to write scripts for monitoring JVM and JDBC. I know the concept of confiuration MBean and run Time MBean.I planned to use WLShell scripting.In my organization using WLShell is not preferred by anyone. I
dont have any further idea about it. Any other possibilies are there to list the paramters of JVM and JDBC using any scripting.Please help me regrding this.
JasmineI solved that problem.Now i could enter into intractive mode.but couldnt connect to server using connect('weblogic','weblogic','t3://localhost:7001').The servers are up and running.
I am getting the following error.
java.rmi.UnmarshalException: error unmarshalling arguments; nested exception is:
java.io.StreamCorruptedException
at weblogic.rjvm.BasicOutboundRequest.sendReceive(BasicOutboundRequest.java:108)
at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:138)
at weblogic.management.internal.RemoteMBeanServerImpl_812_WLStub.getServerName(Unknown Source)
at weblogic.management.scripting.WLScriptContext.connect(WLScriptContext.java:129)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java)
at org.python.core.PyMethod.__call__(PyMethod.java)
at org.python.core.PyObject.__call__(PyObject.java)
at org.python.core.PyObject.invoke(PyObject.java)
at org.python.pycode._pyx4.connect$2(<iostream>:68)
at org.python.pycode._pyx4.call_function(<iostream>)
at org.python.core.PyTableCode.call(PyTableCode.java)
at org.python.core.PyTableCode.call(PyTableCode.java)
at org.python.core.PyTableCode.call(PyTableCode.java)
at org.python.core.PyFunction.__call__(PyFunction.java)
at org.python.pycode._pyx6.f$0(<input>:1)
at org.python.pycode._pyx6.call_function(<input>)
at org.python.core.PyTableCode.call(PyTableCode.java)
at org.python.core.PyCode.call(PyCode.java)
at org.python.core.Py.runCode(Py.java)
at org.python.core.Py.exec(Py.java)
at org.python.util.PythonInterpreter.exec(PythonInterpreter.java)
at org.python.util.InteractiveInterpreter.runcode(InteractiveInterpreter.java)
at org.python.util.InteractiveInterpreter.runsource(InteractiveInterpreter.java)
at org.python.util.InteractiveInterpreter.runsource(InteractiveInterpreter.java)
at weblogic.WLST.main(WLST.java:113)
Caused by: java.io.StreamCorruptedException
at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1301)
at java.io.ObjectInputStream.readObject(ObjectInputStream.java:324)
at weblogic.common.internal.ChunkedObjectInputStream.readObject(ChunkedObjectInputStream.java:119)
at weblogic.rjvm.MsgAbbrevInputStream.readObject(MsgAbbrevInputStream.java:112)
at weblogic.management.internal.RemoteMBeanServerImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:477)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:420)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:353)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:144)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:415)
at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:30)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
--------------- nested within: ------------------
weblogic.rmi.extensions.RemoteRuntimeException: Unexpected Exception - with nested exception:
<b>Please help me out.</b>
Jasmine -
SAP Screen Personas problem in a script for FS00(G/L Account Display) screen
We are facing a problem when we are developing a simple script for FS00(G/L Account Display) in SAP Screen Personas. Let me give you a brief of the problem:
We have taken two text fields in the dashboard from which the values will be copied and will be pasted in corresponding text fields of G/L Account and Company Code in FS00 TCode.
When we are giving both the values, then script is working fine and it will navigate to the customized Personas screen where all the details are shown.
But when we are leaving any one/both fields blank and execute the script option, then the pop to enter G/L Account/Company Code is coming:
If we are setting the basic FS00 TCode view as default then after the pop-up we are able to enter the respective G/L account number or company code and everything is running fine.
If we are setting our customized personas screen as default screen, then the pop-up keeps on appearing and therefore we are not able to give the inputs (G/L account or company code).
And even if somehow manage to get rid of the error and enter the correct GL account and Company Code then also the details are not displayed. The F4 search help to pick the G/L account number and company code is not working, somehow the Personas screen seems to be locked here.
Please let us know if someone has already encountered this type of situation before and what should be the solution of this.Hi,
You could ensure that both of the text fields are not empty on your 'dashboard' before executing the FS00 tcode. This would negate the popup from ever appearing.
To do this you can use the "IF <text field control ID> Is Empty" statement in your script and then output a custom error message to another text box if the condition is true. then use an "IF <text field control ID> Is NOT Empty" statement to copy the value/s execute the FS00 tcode if the condition is true.
Now if you're going to check multiple fields for entries before executing the FS00 you'll have to get a little more creative and do something like I did in one my scripts (thanks again to Steve Rumsby for the tips) and create a 'check field' where you can enter values for items checked successfully and then use a little bit of javascript to count up the checks and check the result before executing the next part of the script.
Another idea is to check for the existence of the popup and navigate past it in your script, to do this you can use the "IF <control ID> control exists" statement.
Either one should work. -
Problems with Freehand Illustrator CS4 script for Macs
A couple of us just downloaded the new Freehand to Illustrator CS4 script for Macs that was released on 5/17/10. Sometimes it works okay, but more often than not we get errors like 'ERROR: 1, Access is denied'. If we instead just open the Freehand file, the file comes in fine. What have been other people's experiences using this new script?
Mac OS X 10.5.5Is the problem there only at the time of conversion or even the FH files are not opening after running the script
Here is what I have done and may be you can follow the exact steps :
1) Create a folder FH on Desktop and paste only the FH files in the folder( My folder does not contain any other file apart from FH files)
2) Create a Folder AI on Desktop and keep it empty
3) File-> Scripts-> FreehandToAI
4) Select the source folder( FH)
5) Now select the destination folder(AI)
It gives the message after conversion "N freehand files are converted to AI". -
Need Help in creating Unix Shell Script for database
Would be appreciable if some one can help in creating unix shell script for the Oracle DB 10,11g.
Here is the condition which i want to implement.
1. Create shell script to create the database with 10GB TB SPACE and 3 groups of redo log file(Each 300MB).
2. Increase size of redolog file.
3. Load sample schema.
4. dump the schema.
5. Create empty db (Script should check if db already exists and drop it in this case).
6. Create backup using rman.
7. restore backup which you have backed up.This isn't much of a "code-sharing" site but a "knowledge-sharing" site. Code posted me may be from a questioner who has a problem / issue / error with his code. But we don't generally see people writing entire scripts as responses to such questions as yours. There may be other sites where you can get coding done "for free".
What you could do is to write some of the code and test it and, if and when it fails / errors, post it for members to make suggestions.
But the expectation here is for you to write your own code.
Hemant K Chitale -
Generate script for filling table
Hi all,
I've got table at test Oracle server table1 with columns ID, BTYPE, MYDESCRIPTION. Rows of this table have been inserted manually. Now my need is to write script for creating table (structure + data). I think about writing something like
CREATE TABLE table 1
AS
SELECT 1 AS ID, 'TYPE1' AS BTYPE, 'SOME TEXT' AS MYDESCRIPTION
UNION ALL
SELECT 2 AS ID, 'TYPE2' AS BTYPE, 'SOME TEXT 2' AS MYDESCRIPTION
But rows are too many to type... Could you please suggest some way of generating script for creating table at working server using existing table at test server? The problem is I don't have an access to working server.
Thanks ahead.Use the view user_tab_cols
say
declare
cursor c1 is
select 'e_'||column_name ||' '||data_type||' ('||data_length||') ' col
from user_tab_cols
where table_name = 'DEPARTMENTS'
union
select 'd_'||column_name ||' '||data_type||' ('||data_length||') ' col
from user_tab_cols
where table_name = 'EMPLOYEES';
v1 varchar2(500);
begin
v1 := 'create table new_tabl (';
for i in c1 loop
v1 := v1||i.col||',';
end loop;
v1 := substr(v1,1,length(v1)-1);
dbms_output.put_line(v1||')');
end;
/i am using employees and departments table of hr schema.
now as both the tables have some column column so i have used e for employees and d for departments
just do one thing remove the length for date data type in o/p i dont know why it is not working.
this will give you structure for data use any sql stmt
Edited by: 810345 on Jun 9, 2011 9:58 PM
Maybe you are looking for
-
I want to set up PASSBOOK since it was installed with os6 however when I open the app on my Iphone it show thw app store button , I tape it and I says cant connect to itunes eventhough i am connect by cable to itunes.....so I cant set up PASSBOOK any
-
BP replication from CRM to R3 Error
Hi All, We are working on CRM 4.0 Unicode version. The details of the system are as follows SAP_BASIS 620 0056 SAPKB62056 SAP_ABA 620 0056 SAPKA62056 BBPCRM 400 0009 SAPKU40009 PI_BASIS
-
Using BT FON with a different home router
I currently have a BT Home Hub and have opted in to BT FON, which I have been using quite a bit when away from home. However, I am thinking about switching to a different router at home, for unrelated reasons. Am I correct in my interpretation that I
-
Is it possible to have select options or ranges defined on the screen developed in module pool [ABAP program type (M)]. As if now, I only see a paramters option for any input/output element on the module pool screen. Can it be extended to act like se
-
Documentation of a control or indicator
I was documenting a control and indicator using the Properties->Documentation section. In Labview 8.0, you can add new lines into the Description section. In Labview 8.2, I can no longer add new lines in the area. This function fortunately works in t