Procedure or function 'sp_MSupd_dboItems' expects parameter '@bitmap', which was not supplied.

Hello,
when i view replication monitor i get the following error:
Procedure or function 'sp_MSupd_dboItems' expects parameter '@bitmap', which was not supplied. (Source: MSSQLServer, Error number: 201)
also, in what database the stored procedure 'sp_MSupd_dboItems' found
Can someone help with this error please

I know I am very late to the party.. However, I would like to provide a solution to this problem. I have seen this problem lately and I have fixed it.
This problem occurs when you are replicating the data over to the same target database from multiple sources.
Let me explain briefly with an example.
I have a table namely 'vijay.dbo.test_vj' on ServerA and replicating it over to ServerC with the same schema as 'vijay.dbo.test_vj' at the target database.
I have a table namely 'vijay.dbo.test_vj' on ServerB and replicating it over to ServerC with a different schema as 'vijay.srvrB.test_vj' at the target database.
So, here in this case… the target database is same but the target tables are different (i.e., schema is different). The problem here is that the replication stored procedures (sp_MSins*, sp_MSupd* & sp_MSdel*) that were created by default at the target
database are being used for both the replications of 'srvrB' and 'dbo' schema tables.
When you configure this type of replication, you should give custom names to the replication stored procedures (in the article properties) to allow the Replication to create the stored procedures separately for each table at the target database.
You need to reconfigure one of those replications (either the one for ServerA to ServerC or the one for ServerB to ServerC) by giving a separate names to the replication procedures.
This change will fix your problem.
Regards, Vijay Pidikiti

Similar Messages

(rsInternalError) Procedure or function 'CreateSession' expects parameter '@SiteZone', which was not supplied.

Hi,
Does the (Procedure or function CreateSession expects parameter @SiteZone, which was not supplied.)
error require a complete reconfiguration of reporting services ?
Regards

Hi KeeperHill,
The error message” Procedure or function 'CreateSession' expects parameter '@SiteZone', which was not supplied.” means that there is a procedure or function named CreateSession, it expects a parameter(@SiteZone) but not given.
Based on my research, the problem can be caused by the two reasons:
The use of null value for parameter @SiteZone, we should actually use DBNull.Value.
Forgotten to put the following command in your code:
cmd.CommandType = CommandType.StoredProcedure;
For more details, please refer to the similar thread below:
http://stackoverflow.com/questions/368642/procedure-expects-parameter-which-was-not-supplied
If there are any misunderstanding, please elaborate the issue for further investigation.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Procedure or function 'udsp_insert_wkt' expects parameter '@point', which was not supplied.

Trying to execute a Altered procedure
I get this part and it works but when I go to EXECUTE it it will come up with an error. Need to know what to write to enable me to execute this in a new query.
ALTER PROCEDURE udsp_insert_wkt (@point VARCHAR(MAX), @label VARCHAR(50))
AS
DECLARE @multi_point GEOMETRY
SET @multi_point = GEOMETRY::STMPointFromText
('Multipoint(176.86355352401733,-39.64865406839853, 176.86365008354187,-39.6485797202591, 176.8630814552307,-39.648096455404016, 176.8591332435608,-39.65064491661999, 176.85998618602753,-39.65143793562977, 176.8598359823227,-39.651537062366394)',
0);
INSERT INTO geometry_points VALUES (@multi_point,@label)
SELECT @multi_point.STBuffer(1);
GO

Hi,
Define Default values if you aren’t going to pass values to both the parameters. Ideally SQL Expects booth the Values to be passed , unless you have defined Default values
ALTER
PROCEDURE udsp_insert_wkt
(@point VARCHAR(MAX), @label
VARCHAR(50)
= NULL)
AS
DECLARE @multi_point
GEOMETRY
SET @multi_point
= GEOMETRY::STMPointFromText
('Multipoint(176.86355352401733,-39.64865406839853, 176.86365008354187,-39.6485797202591, 176.8630814552307,-39.648096455404016,
176.8591332435608,-39.65064491661999, 176.85998618602753,-39.65143793562977, 176.8598359823227,-39.651537062366394)',
0);
INSERT
INTO geometry_points VALUES
(@multi_point,@label)
SELECT @multi_point.STBuffer(1);
GO
Regards, PS

Procedure 'abc' expects parameter '@def', which was not supplied

Hi ,
I am doing a ABAP Proxy to PI to JDBC Stored Procedure synchronous scenario but getting an error as :
Error while parsing or executing XML-SQL document: Error processing request in sax parser: Error when executing statement for table/stored proc. 'db.abc' (structure 'Statement'): java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC][SQLServer]Procedure 'abc' expects parameter '@def', which was not supplied.
I have a element by name def in the data type.
Any ideas why this error is coming up?
Thanks,
Anu

use logsqlstatement in receiver JDBC, it will give you exact sql PI is firing on DB.
using that you can adjust your DT structure to form the right sql.

Procedure or function expects parameter name which was not supplied

SQL 2008R2 - BIDS
I added an additional parameter to my SSRS Report. I set it up identical to a couple other parameters already in the report. I added the parameter to the dataset. I added the parameter to the stored procedure and verified that it functions
correctly in SSMS.
When I Preview the report I get the Procedure expects parameter error even though the parameter is in the parameter list with a value (0) assigned.
How can I make this work???

Hi John,
The most likely is the parameter name on the dataset , doesnt match the parameter you created ,the best was is to delete the parameters related to the dataset and apply the stored procedure again to a dataset it willl create the parameters automatically,i
have replicated the logic below is an example
Create Procedure testp
@Country Varchar(max),
@Year Int
as
SELECT DimSalesTerritory.SalesTerritoryCountry, DimDate.CalendarYear, FactInternetSales.SalesAmount
FROM FactInternetSales INNER JOIN
DimDate ON FactInternetSales.OrderDateKey = DimDate.DateKey INNER JOIN
DimSalesTerritory ON FactInternetSales.SalesTerritoryKey = DimSalesTerritory.SalesTerritoryKey
where SalesTerritoryCountry =@Country
And DimDate.CalendarYear=@Year
I have just renamed one of the parameter for year to YYear and it throws an error similar to yours
Many Thanks
Chandra
Please mark as answered If this helps to solve your issue.

JDBC adapter Stored Procedure error: parameter was not supplied

I am trying to call a Stored Procedure 'SP_FUSION_DEBMS_ADRC_MANAGE_CUSTOMER_ADDRESS' in our SQL Server database.
XI 3.0 Sp13
Jdbc Url: jdbc:microsoft:sqlserver://161.241.255.91:1433;databaseName=FusionDB;SelectMethod=Cursor
I am getting following error:
beging of error-----
Exception caught by adapter framework: Error processing request in sax parser: Error when executing statement for table/stored proc. 'SP_FUSION_DEBMS_ADRC_MANAGE_CUSTOMER_ADDRESS' (structure 'Statement1'): java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC][SQLServer]Procedure 'SP_FUSION_DEBMS_ADRC_MANAGE_CUSTOMER_ADDRESS' expects parameter '@control_no', which was not supplied.
End of error-----
I have defined the field "control_no" in the interface defenition but I am not sure what causing this error, error message is mis-leading.
Please let me know if you have any hints/comments?
thanks,
Laxman molugu

Hi Laxman,
maybe you have checked this already...from the following help link....DECIMAL might be something you might want to try out....
http://help.sap.com/saphelp_nw04/helpdata/en/2e/96fd3f2d14e869e10000000a155106/frameset.htm
<i>action=EXECUTE
Statements with this action result in a stored procedure being executed. The name of the element is interpreted as the name of the stored procedure in the database. If you use the optional <table> element, the value specified here is used as the stored procedure name. This enables you, for example, to define stored procedure names containing non-XML-compatible characters or characters that prevent them from being used in interface definitions in the Integration Builder/PCK. If specified, <table> must be the first element in the block within <dbTableName>.
The elements within the stored procedure are interpreted as parameters. They can optionally have the attribute isInput=1 (input parameter) or isOutput=1 (output parameter) or both (INOUT parameter). If both attributes are missing, the element is interpreted as an input parameter. The parameter names must be identical to those of the stored procedure definition.
The attribute type=<SQL-Datatype> , which describes the valid SQL data type, is mandatory for all parameter types (IN, OUT, INOUT).
The following SQL data types are supported:
INTEGER, BIT, TINYINT, SMALLINT, BIGINT, FLOAT, REAL, DOUBLE, NUMERIC, DECIMAL, CHAR, VARCHAR, STRING, LONGVARCHAR, DATE, TIME, TIMESTAMP, BINARY, VARBINARY, LONGVARBINARY, BLOB (input and output),CLOB (input and output), CURSOR (output; only in conjunction with the Oracle JDBC driver).</i>

I lost all my unpinned 30 tabs and could not restore it, when Adobe update opened a link by firefox, which was not running in the background.

I lost all my unpinned 30 tabs and could not restore it, when Adobe update opened a link by firefox, which was not running in the background.
I guess what I have experienced might be a special case of 'Restore previous sessions'. The actual situation was that after I rebooted my laptop, Adobe update jumped out indicating an update being finished successfully. After I clicked on the 'close' button of the Adobe window, it automatically started firefox and linked to its website. But I did not find the 'Restore previous sessions' page this time. Then I restarted firefox, this time there was a start page with 'Restore previous sessions'. However, sadly enough, it is only restored my pinned pages plus the Adobe website. Actually, I am using 'bookmark all tabs' from time to time to secure opened tabs, but this time I did not expect such an incident. I would suggest to improve the 'Restore previous sessions' with multiple time tags and appear in all cases including my reported case here, after updating firefox, crashes etc. I like firefox in most occasions, therefore believe and hope it becomes better and more robust. Thank you very much!

Hi,
Please see the following support request: http://forums.mozillazine.org/viewtopic.php?f=38&t=2628065
I think the best option would be to leave feedback here to let the relevant development team know about the problem you have had: https://input.mozilla.org/en-GB/feedback
Also you could try the [https://addons.mozilla.org/en-US/firefox/addon/session-manager/ Session Manager] add-on which gives more control over how sessions are restored.
I hope that helps

Error msg- ME53N tocde "company was not supplied in Function module inte -

Hi
When user is trying to open ME53N tcode he is getting folowing error message,
"company was not supplied in Function module interface"
Kindly help, how to avoid this error message.
Thank You in advance.
WR,
Nilesh

We observed this error comes when you had previously opened any PO which now has missing data or assignment like ..plant deactivated..plant CC assignment etc.
Work around, Open any Good PO in chnage mode me22n or create any test PO in me21n. And then try to execute me23n.
Regards,
Nilesh Hiwale

Company was not supplied in Function module interface

Hi all,
When i tries to access the following tcode - me52n,me53n i got following erro message "Company was not supplied in Function module interface" ,
Thanks

Hi Navdeep,
Maintain company code in your user profile with the parameter id BUK.
like in you user profile, on parameter id tab give the parameter id name BUk and value '0001' (the company code against purchase requistion had been created)
Hope it will solve your problem.
Regards
Krish

I'm using Iphone 5 .After updating it with the latest software i.e iOS 7.0.6 I'm not able to see the wats app and imsg on my notification until and unless i activate the "Show on Lock Screen" which was not same as in the earlier software version.Help plz

I'm using Iphone 5 .After updating it with the latest software i.e iOS 7.0.6 I'm not able to see the wats app and imsg on my notification center when my phone is locked until and unless i activate the "Show on Lock Screen" under each application. which was not same as in the earlier software version.I dnt want my messages or watsapp msges to be displayed on home screen when locked but should be displayed on the notification center on lock condition.
Please suggest a solution or @Apple please get a software release which can remove this bug .

We aren't Apple, just users like you. Have you tried a reset? Hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

TS1702 Hi, how can I install Face Time on iPhone 4. Which was not installed since I bought it. Thanks.

Hi, how can I install Face Time on iPhone 4. Which was not installed since I bought it. Thanks.

If the phone was purchased in a Middle Eastern country that has banned FaceTime, there is no way to enable. Otherwise, FaceTime is already installed.

When I leave my iphone in my room and went out. After I came back, I find several apps which was not opened before had been opened. It here are also 8-10 photos of my ceiling being taken, includes video. Also my home page picture has been changed.

When I leave my iphone in my room and went out. After I came back, I find several apps which was not opened before had been opened. It here are also 8-10 photos of my ceiling being taken, includes video. Also my home page picture has been changed.

also my sister said she heard music being played fr my phone suddently. Is my iphone being hacked?

ME52n - Error Message - Company was not supplied in function module.

Hello,
It is giving error Message - "Company was not supplied in function module" in the initial screen of ME52n and ME53n.
Please help.
Thanks,
Piyush

Hi Vadi,
when ever you open me52n or me53n ..system by default opnes/shows your last created/ opned PR.
so if that last created / changed PR is having wrong/faulty data (missing assignment/ plat stolocation deleted etc) ..system will not be able to fetch respective data....thats why you will get above eror message...
Solution : Create any smaple PR in ME51n/ or try to chnage any existing PR.. and then save it.
try this 1 or 2 times.
Hope so this will help.
Regards,
Nilesh

When I updated to OS 5.0 my old apple id which was not an e-mail address won't work anymore, how can I fix this?

When I updated to OS 5.0 my old apple id which was not an e-mail address won't work anymore, how can I fix this?

There is no way to consolidate iTunes accounts.
Setting up an iPhone has never required creation of a new Apple ID.
You've apparently purchased content with both Apple ID's. Sign into the device with the correct Apple ID and sync the content.

I purchased an iPhone5 at an unclaimed items police auction yesterday, but after I charged it and turned it on, it is asking me for the passcode which unfortunately I was not supplied with. Is there a way to get around the code or have I wasted my money?

I purchased an iPhone5 at an unclaimed items police auction yesterday, but after I charged it and turned it on, it is asking me for the passcode which unfortunately I was not supplied with. Is there a way to get around the code or have I wasted my money?

If the Phone is Running iOS 7... then it has Activation Lock Enabled.
Activation Lock in iOS 7 > http://support.apple.com/kb/HT5818
ShellyfromHunterValley wrote:
... have I wasted my money?
More than likely... I believe ebay has an area where you may be able to sell it for parts.

Procedure or function 'sp_MSupd_dboItems' expects parameter '@bitmap', which was not supplied.

Similar Messages

Maybe you are looking for