(rsInternalError) Procedure or function 'CreateSession' expects parameter '@SiteZone', which was not supplied.

Hi,
Does the (Procedure or function CreateSession expects parameter @SiteZone, which was not supplied.)
error require a complete reconfiguration of reporting services ?
Regards

Hi KeeperHill,
The error message” Procedure or function 'CreateSession' expects parameter '@SiteZone', which was not supplied.” means that there is a procedure or function named CreateSession, it expects a parameter(@SiteZone) but not given.
Based on my research, the problem can be caused by the two reasons:
The use of null value for parameter @SiteZone, we should actually use DBNull.Value.
Forgotten to put the following command in your code:
cmd.CommandType = CommandType.StoredProcedure;
For more details, please refer to the similar thread below:
http://stackoverflow.com/questions/368642/procedure-expects-parameter-which-was-not-supplied
If there are any misunderstanding, please elaborate the issue for further investigation.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Similar Messages

Procedure or function 'sp_MSupd_dboItems' expects parameter '@bitmap', which was not supplied.

Hello,
when i view replication monitor i get the following error:
Procedure or function 'sp_MSupd_dboItems' expects parameter '@bitmap', which was not supplied. (Source: MSSQLServer, Error number: 201)
also, in what database the stored procedure 'sp_MSupd_dboItems' found
Can someone help with this error please

I know I am very late to the party.. However, I would like to provide a solution to this problem. I have seen this problem lately and I have fixed it.
This problem occurs when you are replicating the data over to the same target database from multiple sources.
Let me explain briefly with an example.
I have a table namely 'vijay.dbo.test_vj' on ServerA and replicating it over to ServerC with the same schema as 'vijay.dbo.test_vj' at the target database.
I have a table namely 'vijay.dbo.test_vj' on ServerB and replicating it over to ServerC with a different schema as 'vijay.srvrB.test_vj' at the target database.
So, here in this case… the target database is same but the target tables are different (i.e., schema is different). The problem here is that the replication stored procedures (sp_MSins*, sp_MSupd* & sp_MSdel*) that were created by default at the target
database are being used for both the replications of 'srvrB' and 'dbo' schema tables.
When you configure this type of replication, you should give custom names to the replication stored procedures (in the article properties) to allow the Replication to create the stored procedures separately for each table at the target database.
You need to reconfigure one of those replications (either the one for ServerA to ServerC or the one for ServerB to ServerC) by giving a separate names to the replication procedures.
This change will fix your problem.
Regards, Vijay Pidikiti

Procedure or function 'udsp_insert_wkt' expects parameter '@point', which was not supplied.

Trying to execute a Altered procedure
I get this part and it works but when I go to EXECUTE it it will come up with an error. Need to know what to write to enable me to execute this in a new query.
ALTER PROCEDURE udsp_insert_wkt (@point VARCHAR(MAX), @label VARCHAR(50))
AS
DECLARE @multi_point GEOMETRY
SET @multi_point = GEOMETRY::STMPointFromText
('Multipoint(176.86355352401733,-39.64865406839853, 176.86365008354187,-39.6485797202591, 176.8630814552307,-39.648096455404016, 176.8591332435608,-39.65064491661999, 176.85998618602753,-39.65143793562977, 176.8598359823227,-39.651537062366394)',
0);
INSERT INTO geometry_points VALUES (@multi_point,@label)
SELECT @multi_point.STBuffer(1);
GO

Hi,
Define Default values if you aren’t going to pass values to both the parameters. Ideally SQL Expects booth the Values to be passed , unless you have defined Default values
ALTER
PROCEDURE udsp_insert_wkt
(@point VARCHAR(MAX), @label
VARCHAR(50)
= NULL)
AS
DECLARE @multi_point
GEOMETRY
SET @multi_point
= GEOMETRY::STMPointFromText
('Multipoint(176.86355352401733,-39.64865406839853, 176.86365008354187,-39.6485797202591, 176.8630814552307,-39.648096455404016,
176.8591332435608,-39.65064491661999, 176.85998618602753,-39.65143793562977, 176.8598359823227,-39.651537062366394)',
0);
INSERT
INTO geometry_points VALUES
(@multi_point,@label)
SELECT @multi_point.STBuffer(1);
GO
Regards, PS

Procedure 'abc' expects parameter '@def', which was not supplied

Hi ,
I am doing a ABAP Proxy to PI to JDBC Stored Procedure synchronous scenario but getting an error as :
Error while parsing or executing XML-SQL document: Error processing request in sax parser: Error when executing statement for table/stored proc. 'db.abc' (structure 'Statement'): java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC][SQLServer]Procedure 'abc' expects parameter '@def', which was not supplied.
I have a element by name def in the data type.
Any ideas why this error is coming up?
Thanks,
Anu

use logsqlstatement in receiver JDBC, it will give you exact sql PI is firing on DB.
using that you can adjust your DT structure to form the right sql.

Procedure or function expects parameter name which was not supplied

SQL 2008R2 - BIDS
I added an additional parameter to my SSRS Report. I set it up identical to a couple other parameters already in the report. I added the parameter to the dataset. I added the parameter to the stored procedure and verified that it functions
correctly in SSMS.
When I Preview the report I get the Procedure expects parameter error even though the parameter is in the parameter list with a value (0) assigned.
How can I make this work???

Hi John,
The most likely is the parameter name on the dataset , doesnt match the parameter you created ,the best was is to delete the parameters related to the dataset and apply the stored procedure again to a dataset it willl create the parameters automatically,i
have replicated the logic below is an example
Create Procedure testp
@Country Varchar(max),
@Year Int
as
SELECT DimSalesTerritory.SalesTerritoryCountry, DimDate.CalendarYear, FactInternetSales.SalesAmount
FROM FactInternetSales INNER JOIN
DimDate ON FactInternetSales.OrderDateKey = DimDate.DateKey INNER JOIN
DimSalesTerritory ON FactInternetSales.SalesTerritoryKey = DimSalesTerritory.SalesTerritoryKey
where SalesTerritoryCountry =@Country
And DimDate.CalendarYear=@Year
I have just renamed one of the parameter for year to YYear and it throws an error similar to yours
Many Thanks
Chandra
Please mark as answered If this helps to solve your issue.

JDBC adapter Stored Procedure error: parameter was not supplied

I am trying to call a Stored Procedure 'SP_FUSION_DEBMS_ADRC_MANAGE_CUSTOMER_ADDRESS' in our SQL Server database.
XI 3.0 Sp13
Jdbc Url: jdbc:microsoft:sqlserver://161.241.255.91:1433;databaseName=FusionDB;SelectMethod=Cursor
I am getting following error:
beging of error-----
Exception caught by adapter framework: Error processing request in sax parser: Error when executing statement for table/stored proc. 'SP_FUSION_DEBMS_ADRC_MANAGE_CUSTOMER_ADDRESS' (structure 'Statement1'): java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC][SQLServer]Procedure 'SP_FUSION_DEBMS_ADRC_MANAGE_CUSTOMER_ADDRESS' expects parameter '@control_no', which was not supplied.
End of error-----
I have defined the field "control_no" in the interface defenition but I am not sure what causing this error, error message is mis-leading.
Please let me know if you have any hints/comments?
thanks,
Laxman molugu

Hi Laxman,
maybe you have checked this already...from the following help link....DECIMAL might be something you might want to try out....
http://help.sap.com/saphelp_nw04/helpdata/en/2e/96fd3f2d14e869e10000000a155106/frameset.htm
<i>action=EXECUTE
Statements with this action result in a stored procedure being executed. The name of the element is interpreted as the name of the stored procedure in the database. If you use the optional <table> element, the value specified here is used as the stored procedure name. This enables you, for example, to define stored procedure names containing non-XML-compatible characters or characters that prevent them from being used in interface definitions in the Integration Builder/PCK. If specified, <table> must be the first element in the block within <dbTableName>.
The elements within the stored procedure are interpreted as parameters. They can optionally have the attribute isInput=1 (input parameter) or isOutput=1 (output parameter) or both (INOUT parameter). If both attributes are missing, the element is interpreted as an input parameter. The parameter names must be identical to those of the stored procedure definition.
The attribute type=<SQL-Datatype> , which describes the valid SQL data type, is mandatory for all parameter types (IN, OUT, INOUT).
The following SQL data types are supported:
INTEGER, BIT, TINYINT, SMALLINT, BIGINT, FLOAT, REAL, DOUBLE, NUMERIC, DECIMAL, CHAR, VARCHAR, STRING, LONGVARCHAR, DATE, TIME, TIMESTAMP, BINARY, VARBINARY, LONGVARBINARY, BLOB (input and output),CLOB (input and output), CURSOR (output; only in conjunction with the Oracle JDBC driver).</i>

Company was not supplied in Function module interface

Hi all,
When i tries to access the following tcode - me52n,me53n i got following erro message "Company was not supplied in Function module interface" ,
Thanks

Hi Navdeep,
Maintain company code in your user profile with the parameter id BUK.
like in you user profile, on parameter id tab give the parameter id name BUk and value '0001' (the company code against purchase requistion had been created)
Hope it will solve your problem.
Regards
Krish

Error msg- ME53N tocde "company was not supplied in Function module inte -

Hi
When user is trying to open ME53N tcode he is getting folowing error message,
"company was not supplied in Function module interface"
Kindly help, how to avoid this error message.
Thank You in advance.
WR,
Nilesh

We observed this error comes when you had previously opened any PO which now has missing data or assignment like ..plant deactivated..plant CC assignment etc.
Work around, Open any Good PO in chnage mode me22n or create any test PO in me21n. And then try to execute me23n.
Regards,
Nilesh Hiwale

ME52n - Error Message - Company was not supplied in function module.

Hello,
It is giving error Message - "Company was not supplied in function module" in the initial screen of ME52n and ME53n.
Please help.
Thanks,
Piyush

Hi Vadi,
when ever you open me52n or me53n ..system by default opnes/shows your last created/ opned PR.
so if that last created / changed PR is having wrong/faulty data (missing assignment/ plat stolocation deleted etc) ..system will not be able to fetch respective data....thats why you will get above eror message...
Solution : Create any smaple PR in ME51n/ or try to chnage any existing PR.. and then save it.
try this 1 or 2 times.
Hope so this will help.
Regards,
Nilesh

Procedure expects parameter '@OUT'..?

Hi,
I am getting the following exception when i execute stored procedure:
com.microsoft.sqlserver.jdbc.SQLServerException: Procedure '_INR' expects parameter '@OUT', which was not supplied.
     at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDatabaseError(Unknown Source)
     at com.microsoft.sqlserver.jdbc.IOBuffer.processPackets(Unknown Source)I am getting value through SQL Client. But getting exception with the following java class.
Java Class:
public class DBTest {
      * @param args
     public static void main(String[] args) {
          CallableStatement stproc_stmt = null;
          try {
               Class.forName("com.microsoft.sqlserver.jdbc.SQLServerDriver");
               Connection con = DriverManager.getConnection("jdbc:sqlserver://univ25:1433;DatabaseName=stower1205;",
                         "ser1205","ser1205");
               System.out.println("connection ----"+con);
               stproc_stmt = con.prepareCall("{? = call IACUC_UPD_INR(?,?,?)}");
               stproc_stmt.clearParameters();
               stproc_stmt.registerOutParameter(1,Types.INTEGER);
               stproc_stmt.setInt(2,148);
              stproc_stmt.setString(3,"REVISION");
              stproc_stmt.setString(4,"michael");
              //System.out.println("stproc_stmt.execute()>>>>>>>>>"+stproc_stmt.execute());
              System.out.println("---->"+stproc_stmt);
              stproc_stmt.execute();
              SQLWarning sqlw = stproc_stmt.getWarnings();
              System.out.println(sqlw);
              System.out.println("---"+stproc_stmt.getInt(1));
              System.out.println("isInserted ============================>");
              stproc_stmt.close();
              con.close();
          } catch (Exception e) {
               e.printStackTrace();
}Can anyone please tell me the solution.
Thanks in Advance,
LALITH

sandy09 wrote:
Not sure what does 2005 means for CLOB value, I tried changing the value and also tried replacing it with oracle.sql.CLOB and still no luck ...Thus one should read the javadocs.
[http://www.oracle.com/technology/docs/tech/java/sqlj_jdbc/doc_library/javadoc/oracle.jdbc.driver.oraclecallablestatement.html#registerOutParameter(int, int)]
That value is a the 'type' of the data item. I seriously doubt that changing the value is going to solve your problem. You could probably replace it with the correct enumerated value if you wished however (it would still be 2005 though.)
>
The 2005 value seems to be working in some cases but if there are multiple requests (like 30 requests submitted in 1 min) then it is failing with "java.sql.SQLException: Invalid index for data access"
Sometimes it returns "ORA-06502: PL/SQL: numeric or value error: invalid LOB locator specified: ORA-22275ORA-06512: at "SYS.DBMS_LOB" ..
My guess would be that the data going in to your database is bad.
Thus it has nothing to do with this code (which is getting it out.)
Perhaps because the original design called one 'thingy' to be stuck in that field and someone who thought that they were brilliant decided that putting two in there shouldn't be a problem. That of course would be wrong.

Procedure expects parameter '@statement' of type 'ntext/nchar/nvarchar'."

Hi,
When i executed the following query i am getting following error "Msg 214, Level 16, State 2, Procedure sp_executesql, Line 1
Procedure expects parameter '@statement' of type 'ntext/nchar/nvarchar'."
I have to store value in @EndDate variable.
Please advise
Declare @SQL varchar(max)
Declare @Prd varchar(2)
Declare @Year varchar(4)
Declare @Wk varchar(2)
Declare @EndDate varchar(100)
Declare @EndDate1 varchar(100)
select @Prd = RIGHT('0' + cast(AS_OF_PRD AS varchar(2)),2),
@Year = AS_OF_YR,
@Wk = RIGHT('0' + cast(AS_OF_WK AS varchar(2)),2)
from SCP_HEADER
set @SQL = 'SELECT @EndDate = WK ' + @Wk +'_END_DATE from dbo.SCP_CAL_YEAR where CAL_YR =' + @Year
execute SP_EXECUTESQL @SQL,N'@EndDate varchar(100) OUTPUT',@EndDate OUTPUT
print @EndDate
Regards,
Amit

Hallo Amit,
the bug is here
Declare @SQL nvarchar(4000)
set @SQL = N'SELECT @EndDate = WK ' + @Wk +'_END_DATE from dbo.SCP_CAL_YEAR where CAL_YR =' + @Year
BTW: I'm wondering why you concatenate the SQL String but didn't put them as variables to sp_executeSQL
Exactly that's one of the essentials of sp_executeSQL
http://msdn.microsoft.com/en-us/library/aa933299(v=sql.80).aspx
Uwe Ricken
MCITP Database Administrator 2005
MCITP Database Administrator 2008
MCITS Microsoft SQL Server 2008, Database Development
db Berater GmbH
http://www-db-berater.de

How to write procedure or function or any sql statement for requirement

Hi,
i have a table named letter,it contains 2 columns named as letter_id and letter_content.
select * from letter;
letter_id letter_content
103 Dear MFR
103 This is in regards to the attached DM List
103 Please Credit us after reviewing it.
103 Thanks
103 Regards
103 xxxx
108 Dear customer
108 This is to inform that ur DM List is as follows
108 Credit us according to the Dm after reviewing it.
108 Thanks
108 Regards
108 xxxx
now my requirement is,i need send a parameter as letter_id to a procedure or function in pl/sql in oracle,the output should be as follows:
if we will pass parameter(letter_id) = 103 then it displays as follows:
Dear MFR
This is in regards to the attached DM List.Please Credit us after reviewing it.
Thanks
Regards,
XXXXX.
if we will pass parameter(letter_id) = 108 then it should displays as follows:
Dear customer,
This is to inform that ur DM List is as follows. Credit us according to the Dm after reviewing it.
Thanks
Regards,
XXXXX.
---------------------------------------------------------------------------------------------------------

i am really appriciate ur help.
thank u so much for ur suggestions.
when i am uning line_seq its giving an error
ORA-00904: "LINE_SEQ": invalid identifier
so,in my table i had created a sequense named content_seq.
select * from letter;
content_seq letter_id letter_content
1 103 Dear MFR
2 103 This is in regards to the attached DM List
3 103 Please Credit us after reviewing it.
4 103 Thanks
5 103 Regards
6 103 xxxx
7 108 Dear customer
8 108 This is to inform that ur DM List is as follows
9 108 Credit us according to the Dm after reviewing it.
10 108 Thanks
11 108 Regards
12 108 xxxx
then i had used ur code as follows:
select linefrom ( select content_seq , letter_content || case content_seq when 2 then ' ' || lead(letter_content) over (partition by letter_id order by content_seq) end as line from letter where letter_id = 103 )where content_seq <> 3;
LETTER_CONTENT
Dear MFR
this is in regards to the attached DM List Please credit us after reviewing it
thanks
Regards
EXP
but when i take letter_id = 108 the format is comming different.it was unable to combine 2lines.
Message was edited by:
user579585
Message was edited by:
user579585

Help with message please: Warning: mysql_free_result() expects parameter 1 to be resource, null given in...... line

I would really appreciate some help with my search & results page that is now throwing up the following error:
Warning: mysql_free_result() expects parameter 1 to be resource, null given in...... line (the line number refers to the following code:
mysql_free_result($RSsearchforsale);
mysql_free_result($RsSearchForSale2);
mysql_free_result($RsSearchForSale3);
mysql_free_result($RsSearchForSale4);
I am new to php and am setting up a dynamic site in Dreamweaver (thanks to the Missing Manual – very helpful). I apologise in advanced for my lengthy description of the problem (perhaps get yourself a drink before continuing!)
I have a Search page with 4 list menus where the user can select an option from ANY or ALL of the menus, if a menu is not selected the value posted to the results page will be 'zzz'.
On the results page I have 4 recordsets, all getting the correct results, only one recordset is required to run depending on how many of the menus from the search page have been selected and a test is run before executing the sql using a SWITCH statement checking how many of the menus had passed the 'zzz' values from the Search page if you see what I mean. The results page has Repeating Regions, Recordset Paging and Display Record Count. The exact result that I require are generated by this method.
THE PROBLEM, when a user makes a selection the first page of 10 results is fine, but the error message above is shown at the bottom of the page, AND when the user clicks NEXT to go to the next page of results THERE ARE NO RESULTS.
This is exactly what happens depending on how many menus selected and which recordset is used:
4 menus selected from Search: runs RSsearchforsale, results correct but 3 error messages on 1st page relating to mysql_free_result($RsSearchForSale2),mysql_free_result($RsSearchForSale3), & mysql_free_result($RsSearchForSale4). The display record count shows correct results found. NEXT page is empty of results and still shows the correct display record count as if it should be displaying the records, also has the same 3 error messages.
3 menus selected from Search: runs RsSearchForSale2, results correct but 3 error messages on 1st page relating to mysql_free_result($RSsearchforsale),mysql_free_result($RsSearchForSale3), & mysql_free_result($RsSearchForSale4). The display record count shows correct number of results. NEXT page shows results from the DEFAULT setting of the recordset and the Display record count reflects this new set of results. Also still shows the 3 mysql_free_results for RsSearchForSale2, 3 and 4.
2 menus selected from Search: runs   RsSearchForSale3, results correct but 2 error messages on 1st page relating to mysql_free_result($RSsearchforsale) & mysql_free_result (RsSearchForSale4). The display record count is correct. NEXT page does exactly the same as described in above 3 menus selected.
1 menu selected from search: runs RsSearchForSale4, results correct but 1 error meaasge on 1st page, mysql_free_result($RSsearchforsale). Display record count is correct and again when NEXT page is selected does as described in above where 2 or 3 menus selected.
If you have gotten this far without falling asleep then thank you and well done! I have pasted my code below and I know its a lot to ask but please please can you give me an idea as to where or why I have gone wrong. I felt I was so close at perfecting this search and have been working on it for weeks now. I feel sure the problem is because I have 4 recordsets on the page but I could find no other way to get the exact results I wanted from the menus.
Looking forward to any help.
<?php require_once('Connections/propertypages.php'); ?>
<?php if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
$theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
    case "text":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "long":
    case "int":
      $theValue = ($theValue != "") ? intval($theValue) : "NULL";
      break;
    case "double":
      $theValue = ($theValue != "") ? "'" . doubleval($theValue) . "'" : "NULL";
      break;
    case "date":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "defined":
      $theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
      break;
return $theValue;
$currentPage = $_SERVER["PHP_SELF"];
$maxRows_RSsearchforsale = 10;
$pageNum_RSsearchforsale = 0;
if (isset($_GET['pageNum_RSsearchforsale'])) {
$pageNum_RSsearchforsale = $_GET['pageNum_RSsearchforsale'];
$startRow_RSsearchforsale = $pageNum_RSsearchforsale * $maxRows_RSsearchforsale;
$varloc_RSsearchforsale = "mpl";
if (isset($_POST['location'])) {
$varloc_RSsearchforsale = $_POST['location'];
$vartype_RSsearchforsale = "vil";
if (isset($_POST['type'])) {
$vartype_RSsearchforsale = $_POST['type'];
$varprice_RSsearchforsale = "pr9";
if (isset($_POST['price'])) {
$varprice_RSsearchforsale = $_POST['price'];
$varbed_RSsearchforsale = "b5";
if (isset($_POST['beds'])) {
$varbed_RSsearchforsale = $_POST['beds'];
switch (true) {
case ($varloc_RSsearchforsale != 'zzz' && $vartype_RSsearchforsale != 'zzz' && $varprice_RSsearchforsale != 'zzz' && $varbed_RSsearchforsale != 'zzz'):
mysql_select_db($database_propertypages, $propertypages);
$query_RSsearchforsale = sprintf("SELECT DISTINCT trueprice,`desc`, `propid`, `bathrooms`, `photo1`, locationtable.loc, typetable.style, bedtable.`number` FROM detailstable JOIN locationtable ON detailstable.location=locationtable.locid JOIN typetable ON detailstable.type=typetable.typeid JOIN pricetable ON detailstable.price=pricetable.priceid JOIN bedtable ON detailstable.beds=bedtable.bedid WHERE location=%s AND price=%s AND type=%s AND beds=%s ORDER BY detailstable.trueprice ASC", GetSQLValueString($varloc_RSsearchforsale, "text"),GetSQLValueString($varprice_RSsearchforsale, "text"),GetSQLValueString($vartype_RSsearchforsale, "text"),GetSQLValueString($varbed_RSsearchforsale, "text"));
$query_limit_RSsearchforsale = sprintf("%s LIMIT %d, %d", $query_RSsearchforsale, $startRow_RSsearchforsale, $maxRows_RSsearchforsale);
$RSsearchforsale = mysql_query($query_limit_RSsearchforsale, $propertypages) or die(mysql_error());
$row_RSsearchforsale = mysql_fetch_assoc($RSsearchforsale);
if (isset($_GET['totalRows_RSsearchforsale'])) {
$totalRows_RSsearchforsale = $_GET['totalRows_RSsearchforsale'];
} else {
$all_RSsearchforsale = mysql_query($query_RSsearchforsale);
$totalRows_RSsearchforsale = mysql_num_rows($all_RSsearchforsale);
$totalPages_RSsearchforsale = ceil($totalRows_RSsearchforsale/$maxRows_RSsearchforsale)-1;
$queryString_RSsearchforsale = "";
if (!empty($_SERVER['QUERY_STRING'])) {
$params = explode("&", $_SERVER['QUERY_STRING']);
$newParams = array();
foreach ($params as $param) {
    if (stristr($param, "pageNum_RSsearchforsale") == false &&
        stristr($param, "totalRows_RSsearchforsale") == false) {
      array_push($newParams, $param);
if (count($newParams) != 0) {
    $queryString_RSsearchforsale = "&" . htmlentities(implode("&", $newParams));
$queryString_RSsearchforsale = sprintf("&totalRows_RSsearchforsale=%d%s", $totalRows_RSsearchforsale, $queryString_RSsearchforsale); } ?>
<?php require_once('Connections/propertypages.php'); ?>
<?php if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
$theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
    case "text":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "long":
    case "int":
      $theValue = ($theValue != "") ? intval($theValue) : "NULL";
      break;
    case "double":
      $theValue = ($theValue != "") ? "'" . doubleval($theValue) . "'" : "NULL";
      break;
    case "date":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "defined":
      $theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
      break;
return $theValue;
$currentPage = $_SERVER["PHP_SELF"];
$maxRows_RsSearchForSale2 = 10;
$pageNum_RsSearchForSale2 = 0;
if (isset($_GET['pageNum_RsSearchForSale2'])) {
$pageNum_RsSearchForSale2 = $_GET['pageNum_RsSearchForSale2'];
$startRow_RsSearchForSale2 = $pageNum_RsSearchForSale2 * $maxRows_RsSearchForSale2;
$varloc2_RsSearchForSale2 = "mpl";
if (isset($_POST['location'])) {
$varloc2_RsSearchForSale2 = $_POST['location'];
$varprice2_RsSearchForSale2 = "p9";
if (isset($_POST['price'])) {
$varprice2_RsSearchForSale2 = $_POST['price'];
$vartype2_RsSearchForSale2 = "vil";
if (isset($_POST['type'])) {
$vartype2_RsSearchForSale2 = $_POST['type'];
$varbed2_RsSearchForSale2 = "b5";
if (isset($_POST['beds'])) {
$varbed2_RsSearchForSale2 = $_POST['beds'];
switch (true) {
case ($varloc2_RsSearchForSale2 == 'zzz'):
case ($varprice2_RsSearchForSale2 == 'zzz'):
case ($vartype2_RsSearchForSale2 == 'zzz'):
case ($varbed2_RsSearchForSale2 == 'zzz'):
mysql_select_db($database_propertypages, $propertypages);
$query_RsSearchForSale2 = sprintf("SELECT DISTINCT trueprice,`desc`, `propid`, `bathrooms`, `photo1`, locationtable.loc, typetable.style, bedtable.`number` FROM detailstable JOIN locationtable ON detailstable.location=locationtable.locid JOIN typetable ON detailstable.type=typetable.typeid JOIN pricetable ON detailstable.price=pricetable.priceid JOIN bedtable ON detailstable.beds=bedtable.bedid WHERE (location=%s AND price=%s AND type=%s) OR (location=%s AND price=%s AND beds=%s) OR (location=%s AND type=%s AND beds=%s) OR (price=%s AND type=%s AND beds=%s) ORDER BY detailstable.trueprice ASC", GetSQLValueString($varloc2_RsSearchForSale2, "text"),GetSQLValueString($varprice2_RsSearchForSale2, "text"),GetSQLValueString($vartype2_RsSearchForSale2, "text"),GetSQLValueString($varloc2_RsSearchForSale2, "text"),GetSQLValueString($varprice2_RsSearchForSale2, "text"),GetSQLValueString($varbed2_RsSearchForSale2, "text"),GetSQLValueString($varloc2_RsSearchForSale2, "text"),GetSQLValueString($vartype2_RsSearchForSale2, "text"),GetSQLValueString($varbed2_RsSearchForSale2, "text"),GetSQLValueString($varprice2_RsSearchForSale2, "text"),GetSQLValueString($vartype2_RsSearchForSale2, "text"),GetSQLValueString($varbed2_RsSearchForSale2, "text"));
$query_limit_RsSearchForSale2 = sprintf("%s LIMIT %d, %d", $query_RsSearchForSale2, $startRow_RsSearchForSale2, $maxRows_RsSearchForSale2);
$RsSearchForSale2 = mysql_query($query_limit_RsSearchForSale2, $propertypages) or die(mysql_error());
$row_RsSearchForSale2 = mysql_fetch_assoc($RsSearchForSale2);
if (isset($_GET['totalRows_RsSearchForSale2'])) {
$totalRows_RsSearchForSale2 = $_GET['totalRows_RsSearchForSale2'];
} else {
$all_RsSearchForSale2 = mysql_query($query_RsSearchForSale2);
$totalRows_RsSearchForSale2 = mysql_num_rows($all_RsSearchForSale2);
$totalPages_RsSearchForSale2 = ceil($totalRows_RsSearchForSale2/$maxRows_RsSearchForSale2)-1;
$queryString_RsSearchForSale2 = "";
if (!empty($_SERVER['QUERY_STRING'])) {
$params = explode("&", $_SERVER['QUERY_STRING']);
$newParams = array();
foreach ($params as $param) {
    if (stristr($param, "pageNum_RsSearchForSale2") == false &&
        stristr($param, "totalRows_RsSearchForSale2") == false) {
      array_push($newParams, $param);
if (count($newParams) != 0) {
    $queryString_RsSearchForSale2 = "&" . htmlentities(implode("&", $newParams));
$queryString_RsSearchForSale2 = sprintf("&totalRows_RsSearchForSale2=%d%s", $totalRows_RsSearchForSale2, $queryString_RsSearchForSale2);
}?>
<?php require_once('Connections/propertypages.php'); ?>
<?php if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
$theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
    case "text":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "long":
    case "int":
      $theValue = ($theValue != "") ? intval($theValue) : "NULL";
      break;
    case "double":
      $theValue = ($theValue != "") ? "'" . doubleval($theValue) . "'" : "NULL";
      break;
    case "date":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "defined":
      $theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
      break;
return $theValue;
$currentPage = $_SERVER["PHP_SELF"];
$maxRows_RsSearchForSale3 = 10;
$pageNum_RsSearchForSale3 = 0;
if (isset($_GET['pageNum_RsSearchForSale3'])) {
$pageNum_RsSearchForSale3 = $_GET['pageNum_RsSearchForSale3'];
$startRow_RsSearchForSale3 = $pageNum_RsSearchForSale3 * $maxRows_RsSearchForSale3;
$varloc3_RsSearchForSale3 = "mpl";
if (isset($_POST['location'])) {
$varloc3_RsSearchForSale3 = $_POST['location'];
$varprice3_RsSearchForSale3 = "p9";
if (isset($_POST['price'])) {
$varprice3_RsSearchForSale3 = $_POST['price'];
$vartype3_RsSearchForSale3 = "vil";
if (isset($_POST['type'])) {
$vartype3_RsSearchForSale3 = $_POST['type'];
$varbed3_RsSearchForSale3 = "b5";
if (isset($_POST['beds'])) {
$varbed3_RsSearchForSale3 = $_POST['beds'];
switch (true) {
case ($varloc3_RsSearchForSale3 == 'zzz' && $varprice3_RsSearchForSale3 == 'zzz'):
case ($varprice3_RsSearchForSale3 == 'zzz' && $vartype3_RsSearchForSale3 == 'zzz'):
case ($vartype3_RsSearchForSale3 == 'zzz' && $varbed3_RsSearchForSale3 == 'zzz' ):
case ($varbed3_RsSearchForSale3 == 'zzz' && $varloc3_RsSearchForSale3 == 'zzz'):
case ($varloc3_RsSearchForSale3 == 'zzz' && $vartype3_RsSearchForSale3 == 'zzz'):
case ($varprice3_RsSearchForSale3 == 'zzz' && $varbed3_RsSearchForSale3 == 'zzz'):
mysql_select_db($database_propertypages, $propertypages);
$query_RsSearchForSale3 = sprintf("SELECT DISTINCT trueprice,`desc`, `propid`, `bathrooms`, `photo1`, locationtable.loc, typetable.style, bedtable.`number` FROM detailstable JOIN locationtable ON detailstable.location=locationtable.locid JOIN typetable ON detailstable.type=typetable.typeid JOIN pricetable ON detailstable.price=pricetable.priceid JOIN bedtable ON detailstable.beds=bedtable.bedid WHERE (location=%s AND price=%s) OR (location=%s AND type=%s) OR (location=%s AND beds=%s) OR ( type=%s AND beds=%s) OR (price=%s AND type=%s) OR (price=%s AND beds=%s) ORDER BY detailstable.trueprice ASC", GetSQLValueString($varloc3_RsSearchForSale3, "text"),GetSQLValueString($varprice3_RsSearchForSale3, "text"),GetSQLValueString($varloc3_RsSearchForSale3, "text"),GetSQLValueString($vartype3_RsSearchForSale3, "text"),GetSQLValueString($varloc3_RsSearchForSale3, "text"),GetSQLValueString($varbed3_RsSearchForSale3, "text"),GetSQLValueString($vartype3_RsSearchForSale3, "text"),GetSQLValueString($varbed3_RsSearchForSale3, "text"),GetSQLValueString($varprice3_RsSearchForSale3, "text"),GetSQLValueString($vartype3_RsSearchForSale3, "text"),GetSQLValueString($varprice3_RsSearchForSale3, "text"),GetSQLValueString($varbed3_RsSearchForSale3, "text"));
$query_limit_RsSearchForSale3 = sprintf("%s LIMIT %d, %d", $query_RsSearchForSale3, $startRow_RsSearchForSale3, $maxRows_RsSearchForSale3);
$RsSearchForSale3 = mysql_query($query_limit_RsSearchForSale3, $propertypages) or die(mysql_error());
$row_RsSearchForSale3 = mysql_fetch_assoc($RsSearchForSale3);
if (isset($_GET['totalRows_RsSearchForSale3'])) {
$totalRows_RsSearchForSale3 = $_GET['totalRows_RsSearchForSale3'];
} else {
$all_RsSearchForSale3 = mysql_query($query_RsSearchForSale3);
$totalRows_RsSearchForSale3 = mysql_num_rows($all_RsSearchForSale3);
$totalPages_RsSearchForSale3 = ceil($totalRows_RsSearchForSale3/$maxRows_RsSearchForSale3)-1;
$queryString_RsSearchForSale3 = "";
if (!empty($_SERVER['QUERY_STRING'])) {
$params = explode("&", $_SERVER['QUERY_STRING']);
$newParams = array();
foreach ($params as $param) {
    if (stristr($param, "pageNum_RsSearchForSale3") == false &&
        stristr($param, "totalRows_RsSearchForSale3") == false) {
      array_push($newParams, $param);
if (count($newParams) != 0) {
    $queryString_RsSearchForSale3 = "&" . htmlentities(implode("&", $newParams));
$queryString_RsSearchForSale3 = sprintf("&totalRows_RsSearchForSale3=%d%s", $totalRows_RsSearchForSale3, $queryString_RsSearchForSale3);
} ?>
<?php require_once('Connections/propertypages.php'); ?>
<?php if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
$theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
    case "text":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "long":
    case "int":
      $theValue = ($theValue != "") ? intval($theValue) : "NULL";
      break;
    case "double":
      $theValue = ($theValue != "") ? "'" . doubleval($theValue) . "'" : "NULL";
      break;
    case "date":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "defined":
      $theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
      break;
return $theValue;
$currentPage = $_SERVER["PHP_SELF"];
$maxRows_RsSearchForSale4 = 10;
$pageNum_RsSearchForSale4 = 0;
if (isset($_GET['pageNum_RsSearchForSale4'])) {
$pageNum_RsSearchForSale4 = $_GET['pageNum_RsSearchForSale4'];
$startRow_RsSearchForSale4 = $pageNum_RsSearchForSale4 * $maxRows_RsSearchForSale4;
$varloc4_RsSearchForSale4 = "mpl";
if (isset($_POST['location'])) {
$varloc4_RsSearchForSale4 = $_POST['location'];
$vartype4_RsSearchForSale4 = "vil";
if (isset($_POST['type'])) {
$vartype4_RsSearchForSale4 = $_POST['type'];
$varprice4_RsSearchForSale4 = "p9";
if (isset($_POST['price'])) {
$varprice4_RsSearchForSale4 = $_POST['price'];
$varbed4_RsSearchForSale4 = "b5";
if (isset($_POST['beds'])) {
$varbed4_RsSearchForSale4 = $_POST['beds'];
switch (true) {
case ($varloc4_RsSearchForSale4 == 'zzz' && $vartype4_RsSearchForSale4 =='zzz' && $varprice4_RsSearchForSale4 == 'zzz'):
case ($varloc4_RsSearchForSale4 == 'zzz' && $varprice4_RsSearchForSale4 =='zzz' && $varbed4_RsSearchForSale4 == 'zzz'):
case ($varloc4_RsSearchForSale4 == 'zzz' && $varbed4_RsSearchForSale4 =='zzz' && $vartype4_RsSearchForSale4 == 'zzz'):
case ($varbed4_RsSearchForSale4 == 'zzz' && $vartype4_RsSearchForSale4 =='zzz' && $varprice4_RsSearchForSale4 == 'zzz'):
mysql_select_db($database_propertypages, $propertypages);
$query_RsSearchForSale4 = sprintf("SELECT DISTINCT trueprice,`desc`, `propid`, `bathrooms`, `photo1`, locationtable.loc, typetable.style, bedtable.`number` FROM detailstable JOIN locationtable ON detailstable.location=locationtable.locid JOIN typetable ON detailstable.type=typetable.typeid JOIN pricetable ON detailstable.price=pricetable.priceid JOIN bedtable ON detailstable.beds=bedtable.bedid WHERE location=%s OR price=%s OR type=%s OR beds=%s ORDER BY detailstable.trueprice ASC", GetSQLValueString($varloc4_RsSearchForSale4, "text"),GetSQLValueString($varprice4_RsSearchForSale4, "text"),GetSQLValueString($vartype4_RsSearchForSale4, "text"),GetSQLValueString($varbed4_RsSearchForSale4, "text"));
$query_limit_RsSearchForSale4 = sprintf("%s LIMIT %d, %d", $query_RsSearchForSale4, $startRow_RsSearchForSale4, $maxRows_RsSearchForSale4);
$RsSearchForSale4 = mysql_query($query_limit_RsSearchForSale4, $propertypages) or die(mysql_error());
$row_RsSearchForSale4 = mysql_fetch_assoc($RsSearchForSale4);
if (isset($_GET['totalRows_RsSearchForSale4'])) {
$totalRows_RsSearchForSale4 = $_GET['totalRows_RsSearchForSale4'];
} else {
$all_RsSearchForSale4 = mysql_query($query_RsSearchForSale4);
$totalRows_RsSearchForSale4 = mysql_num_rows($all_RsSearchForSale4);
$totalPages_RsSearchForSale4 = ceil($totalRows_RsSearchForSale4/$maxRows_RsSearchForSale4)-1;
$queryString_RsSearchForSale4 = "";
if (!empty($_SERVER['QUERY_STRING'])) {
$params = explode("&", $_SERVER['QUERY_STRING']);
$newParams = array();
foreach ($params as $param) {
    if (stristr($param, "pageNum_RsSearchForSale4") == false &&
        stristr($param, "totalRows_RsSearchForSale4") == false) {
      array_push($newParams, $param);
if (count($newParams) != 0) {
    $queryString_RsSearchForSale4 = "&" . htmlentities(implode("&", $newParams));
$queryString_RsSearchForSale4 = sprintf("&totalRows_RsSearchForSale4=%d%s", $totalRows_RsSearchForSale4, $queryString_RsSearchForSale4);
}?>

Hi David,
Thank you for your reply and patience, we are getting closer in spite of me!
Of course i needed to change the name of the recordset, i did that the first time i did it (when i got the error), the when i re did it i forgot, in my defense i was also trying to get a full understanding of the code using the W3Schools php reference and writing by the side of the code on a piece of paper what it meant in English.
Anyway after re doing the code correctly it still displayed all the records of my database but i realised that was because i was POSTING from the search form and when i changed it to the GET method I now get results when all 4 list menus are selected from and the paging works. After reading about the POST / GET method i chose the POST option, is the GET method a better option in my circumstance?
On my site now if the user selects from 1,2 or 3 of the menus rather than selecting the relevant records it displays the NO RESULT page, I would like my users to be able to select from all of the menus or ANY combination of the menus and find exact results for their search, for example if they only select a location and a price i want it display all records that match that location and price with any number of bedrooms and any Type of property: Perhaps this is due to how my list menus are set up, for each menu the first Item label is Location (or Beds or Type or Price) and the value i have left blank which i believe means that it will use the item label as the value, the second Item label for all menus is Any and again the value has been left blank. All other item labels have values relevant to database records.
I do look forward to your reply and cannot thank you enough for following this through with me, please continue to bare with me just a little more,
best regards
Tessimon
Date: Wed, 11 Nov 2009 06:56:24 -0700
From: [email protected]
To: [email protected]
Subject: Help with message please: Warning: mysql_free_result() expects parameter 1 to be resource, null given in...... line
You're not adding the WHERE clause to the SQL query. My example code uses $query_search. You need to change that variable to match the name of your recordset, i.e. $query_RSsearchforsale.
Moreover, the WHERE clause needs to go before ORDER BY.
$query_RSsearchforsale = "SELECT trueprice,`desc`, `propid`, `bathrooms`, `location`, `type`, `price`, `beds`, `photo1`, locationtable.loc, typetable.style, bedtable.`number` FROM detailstable JOIN locationtable ON detailstable.location=locationtable.locid JOIN typetable ON detailstable.type=typetable.typeid JOIN pricetable ON detailstable.price=pricetable.priceid JOIN bedtable ON detailstable.beds=bedtable.bedid ";
// Set a flag to indicate whether the query has a WHERE clause
$where = false;
// Loop through the associatiave array of expected search values
foreach ($expected as $var => $type) {
if (isset($_GET[$var])) {
    $value = trim(urldecode($_GET[$var]));
    if (!empty($value)) {
      // Check if the value begins with > or <
      // If so, use it as the operator, and extract the value
      if ($value[0] == '>' || $value[0] == '<') {
        $operator = $value[0];
        $value = ltrim(substr($value, 1));
      } elseif (strtolower($type) != 'like') {
        $operator = '=';
      // Check if the WHERE clause has been added yet
      if ($where) {
        $query_RSsearchforsale .= ' AND ';
      } else {
        $query_RSsearchforsale .= ' WHERE ';
        $where = true;
      // Build the SQL query using the right operator and data type
      $type = strtolower($type);
      switch($type) {
        case 'like':
          $query_RSsearchforsale .= "`$var` LIKE " . GetSQLValueString('%' .
$value . '%', "text");
          break;
        case 'int':
        case 'double':
        case 'date':
          $query_RSsearchforsale .= "`$var` $operator " .
GetSQLValueString($value, "$type");
          break;
        default:
        $query_RSsearchforsale .= "`$var` = " . GetSQLValueString($value,
"$type");
$query_RSsearchforsale .= ' ORDER BY detailstable.trueprice ASC';
>

Error while using DB Adapter in BPEL[Calling a procedure or function]

Hi
I am getting Error while executing the BPEL Process.
1) I created a BPEL Process which uses a DB Adapter. I am using call a procedure or function. My Procedure is shown below. It takes a string a s input parameter and executes that string. I have used an assign activity to assign the input string.
Procedure
create or replace
PROCEDURE SP_QUERY(s_string in varchar2)
AS
l_sql_stmt varchar2(1000);
BEGIN
l_sql_stmt := s_string;
-- dbms_output.put_line( l_sql_stmt );
EXECute immediate l_sql_stmt;
commit;
dbms_output.put_line('Executed' );
-- if SQLCODE = 0 then
--retCodeString := 'OK';
--end if;
END;
I gave input string as "select * from tab", I have also tried a insert statement to a table in which its present in this database. But i am getting the following error.
<3 Jun, 2013 9:42:25 AM IST> <Error> <oracle.webservices.service> <OWS-04115>
Whats the Issue? Is the issue with the procedure or the BPEL process? Please help me out. I am stuck in this

Hi,
According to your message you have selected your procedure, but looks like the procedure is not having any reply or response parameter with it.
Have you executed the procedure separately from SQL editor and see whether you are able to get the response or not ?
If you get response, then how many columns are you getting ?
Check the column names are matching with the schema file generated by adapter and see whether those column names are available as elements in .xsd file.
Example provided below..
In the below link, check the section "9.7 Stored Procedure and Function Support"
http://docs.oracle.com/cd/E23943_01/integration.1111/e10231/adptr_db.htm#CHDFBBCD
Thanks,
Vijay

How to call PL/SQL function and pass parameter to ODI variable?

Can I call PL/SQL function and assign a return value to an ODI variable? Also can I assign ODI variable to IN paramter and assign OUT parameter to ODI variable? What ODI doc has that information?
Thanks

Hi,
Refer this http://odiexperts.com/how-to-use-plsql-procedures-and-functions-in-odi
Thanks,
Sutirtha

(rsInternalError) Procedure or function 'CreateSession' expects parameter '@SiteZone', which was not supplied.

Similar Messages

Maybe you are looking for