Process between groups reports 6i
I am working with Reports 6i (No wise cracks. It's not my choice). I have a report that shows all policies written for the month for all the companies agencies, I have it grouped by agency with a page break and totals being reset when the group changes. I now need to store the totals for each agency in the database. Is there a way to run a process when the group changes and store the data from the summary columns in the database.
Any help would be appreciated.
Hello DLloyd,
there aren't any trigger to execute between groups. I'll do a procedure that I´ll execute after the report to insert into database.
Similar Messages
-
Processing of Group Policy failed - User Policy - Windows 7
OP:
http://social.technet.microsoft.com/Forums/en-US/w7itpronetworking/thread/191f1ee1-a551-446b-9808-ff66a952bb25
When running a gpupdate I get the following message:
Updating Policy...
User policy could not be updated successfully. The following errors were encount
ered:
The processing of Group Policy failed. Windows could not authenticate to the Act
ive Directory service on a domain controller. (LDAP Bind function call failed).
Look in the details tab for error code and description.
Computer Policy update has completed successfully.
To diagnose the failure, review the event log or run GPRESULT /H GPReport.html f
rom the command line to access information about Group Policy results.
This only happens on one computer under a certain account; other accounts work fine and the problem account works fine on other computers. Therefore the problem is located on the Windows 7 computer.
I have tracked it down to an LDAP error code 49.
I tried the MS sollution (http://technet.microsoft.com/en-us/library/cc727283(v=ws.10).aspx) but the credentials are sound.
I can also connect to the DC with LDP.exe fine.
Here are the diagnostic read outs (GPResult was too long to post):
Log Name: System
Source: Microsoft-Windows-GroupPolicy
Date: 2/29/2012 1:56:09 PM
Event ID: 1006
Task Category: None
Level: Error
Keywords:
User: Domain\UserAccount
Computer: Win7-ComputerA.FQDomain
Description:
The processing of Group Policy failed. Windows could not authenticate to the Active Directory service on a domain controller. (LDAP Bind function call failed). Look in the details tab for error code and description.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-GroupPolicy" Guid="{AEA1B4FA-97D1-45F2-A64C-4D69FFFD92C9}" />
<EventID>1006</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>1</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2012-02-29T19:56:09.732842600Z" />
<EventRecordID>32458</EventRecordID>
<Correlation ActivityID="{CECE6DDC-E7CC-4563-8109-E62382F645D4}" />
<Execution ProcessID="984" ThreadID="3688" />
<Channel>System</Channel>
<Computer>Win7-ComputerA.FQDomain</Computer>
<Security UserID="S-1-5-21-416373151-1271962822-2142307910-40105" />
</System>
<EventData>
<Data Name="SupportInfo1">1</Data>
<Data Name="SupportInfo2">5012</Data>
<Data Name="ProcessingMode">0</Data>
<Data Name="ProcessingTimeInMilliseconds">1326</Data>
<Data Name="ErrorCode">49</Data>
<Data Name="ErrorDescription">Invalid Credentials</Data>
<Data Name="DCName">
</Data>
</EventData>
</Event>
Windows IP Configuration
Host Name . . . . . . . . . . . . : WIN7-ComputerA
Primary Dns Suffix . . . . . . . : FQDomain
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : FQDomain
ParentDomain
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : FQDomain
Description . . . . . . . . . . . : Intel(R) 82579LM Gigabit Network Connecti
on
Physical Address. . . . . . . . . : 00-21-CC-5F-CF-DF
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 216.71.244.28(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Wednesday, February 29, 2012 12:38:25 PM
Lease Expires . . . . . . . . . . : Thursday, March 01, 2012 12:38:24 PM
Default Gateway . . . . . . . . . : 216.71.244.1
DHCP Server . . . . . . . . . . . : 216.71.244.2
DNS Servers . . . . . . . . . . . : 216.71.244.2
216.71.240.120
216.71.240.132
Primary WINS Server . . . . . . . : 216.71.244.2
Secondary WINS Server . . . . . . : 216.71.240.130
216.71.240.122
NetBIOS over Tcpip. . . . . . . . : Enabled
Wireless LAN adapter Wireless Network Connection:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) WiFi Link 1000 BGN
Physical Address. . . . . . . . . : 8C-A9-82-B0-67-E8
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : YesHi,
It sound like port blocking issue, Seems your client system connecting 216.71.240.x DNS Servers as a logon server and which seems on different subnet
as per subnet mask, So there must be a router or firewall in between and so it might be Active directory ports are being blocked.
So first for testing purpose just remove other
216.71.240.x DNS
servers from TCP/IP configuration and clear dns cache
ipconfig/flushdns
and restart the system. check if it works.
or run this command on DC
dcdiag /test:dns
and share the error report.
Cheers!
Sanjay -
How to reduce process time in report
Hi all..
Is there any technique to reduce process time in report on programmer side??
Plz help me...Hi
check this and ensure that your code is as per the stds
1) Dont use nested select statements
2) If possible use for all entries in addition
3) In the where addition make sure you give all the primary key
4) Use Index for the selection criteria.
5) You can also use inner joins
6) You can try to put the data from the first select statement into an Itab and then in order to select the data from the second table use for all entries in.
7) Use the runtime analysis SE30 and SQL Trace (ST05) to identify the performance and also to identify where the load is heavy, so that you can change the code accordingly
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5d0db4c9-0e01-0010-b68f-9b1408d5f234
ABAP performance depends upon various factors and in devicded in three parts:
1. Database
2. ABAP
3. System
Run Any program using SE30 (performance analys) to improve performance refer to tips and trics section of SE30, Always remember that ABAP perfirmance is improved when there is least load on Database.
u can get an interactive grap in SE30 regarding this with a file.
also if u find runtime of parts of codes then use :
Switch on RTA Dynamically within ABAP Code
*To turn runtim analysis on within ABAP code insert the following code
SET RUN TIME ANALYZER ON.
*To turn runtim analysis off within ABAP code insert the following code
SET RUN TIME ANALYZER OFF.
Always check the driver internal tables is not empty, while using FOR ALL ENTRIES
Avoid for all entries in JOINS
Try to avoid joins and use FOR ALL ENTRIES.
Try to restrict the joins to 1 level only ie only for tables
Avoid using Select *.
Avoid having multiple Selects from the same table in the same object.
Try to minimize the number of variables to save memory.
The sequence of fields in 'where clause' must be as per primary/secondary index ( if any)
Avoid creation of index as far as possible
Avoid operators like <>, > , < & like % in where clause conditions
Avoid select/select single statements in loops.
Try to use 'binary search' in READ internal table. Ensure table is sorted before using BINARY SEARCH.
Avoid using aggregate functions (SUM, MAX etc) in selects ( GROUP BY , HAVING,)
Avoid using ORDER BY in selects
Avoid Nested Selects
Avoid Nested Loops of Internal Tables
Try to use FIELD SYMBOLS.
Try to avoid into Corresponding Fields of
Avoid using Select Distinct, Use DELETE ADJACENT
Check the following Links
Re: performance tuning
Re: Performance tuning of program
http://www.sapgenie.com/abap/performance.htm
http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
check the below link
http://www.sap-img.com/abap/performance-tuning-for-data-selection-statement.htm
See the following link if it's any help:
http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
Check also http://service.sap.com/performance
and
books like
http://www.sap-press.com/product.cfm?account=&product=H951
http://www.sap-press.com/product.cfm?account=&product=H973
http://www.sap-img.com/abap/more-than-100-abap-interview-faqs.htm
http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
Performance tuning for Data Selection Statement
http://www.sap-img.com/abap/performance-tuning-for-data-selection-statement.htm
Debugger
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
http://www.cba.nau.edu/haney-j/CIS497/Assignments/Debugging.doc
http://help.sap.com/saphelp_erp2005/helpdata/en/b3/d322540c3beb4ba53795784eebb680/frameset.htm
Run Time Analyser
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617cafe68c11d2b2ab080009b43351/content.htm
SQL trace
http://help.sap.com/saphelp_47x200/helpdata/en/d1/801f7c454211d189710000e8322d00/content.htm
CATT - Computer Aided Testing Too
http://help.sap.com/saphelp_47x200/helpdata/en/b3/410b37233f7c6fe10000009b38f936/frameset.htm
Test Workbench
http://help.sap.com/saphelp_47x200/helpdata/en/a8/157235d0fa8742e10000009b38f889/frameset.htm
Coverage Analyser
http://help.sap.com/saphelp_47x200/helpdata/en/c7/af9a79061a11d4b3d4080009b43351/content.htm
Runtime Monitor
http://help.sap.com/saphelp_47x200/helpdata/en/b5/fa121cc15911d5993d00508b6b8b11/content.htm
Memory Inspector
http://help.sap.com/saphelp_47x200/helpdata/en/a2/e5fc84cc87964cb2c29f584152d74e/content.htm
ECATT - Extended Computer Aided testing tool.
http://help.sap.com/saphelp_47x200/helpdata/en/20/e81c3b84e65e7be10000000a11402f/frameset.htm
Just refer to these links...
performance
Performance
Performance Guide
performance issues...
Performance Tuning
Performance issues
performance tuning
performance tuning
You can go to the transaction SE30 to have the runtime analysis of your program.Also try the transaction SCI , which is SAP Code Inspector.
1 Always check the driver internal tables is not empty, while using FOR ALL ENTRIES
2 Avoid for all entries in JOINS
3 Try to avoid joins and use FOR ALL ENTRIES.
4 Try to restrict the joins to 1 level only ie only for 2 tables
5 Avoid using Select *.
6 Avoid having multiple Selects from the same table in the same object.
7 Try to minimize the number of variables to save memory.
8 The sequence of fields in 'where clause' must be as per primary/secondary index ( if any)
9 Avoid creation of index as far as possible
10 Avoid operators like <>, > , < & like % in where clause conditions
11 Avoid select/select single statements in loops.
12 Try to use 'binary search' in READ internal table. Ensure table is sorted before using BINARY SEARCH.
13 Avoid using aggregate functions (SUM, MAX etc) in selects ( GROUP BY , HAVING,)
14 Avoid using ORDER BY in selects
15 Avoid Nested Selects
16 Avoid Nested Loops of Internal Tables
17 Try to use FIELD SYMBOLS.
18 Try to avoid into Corresponding Fields of
19 Avoid using Select Distinct, Use DELETE ADJACENT.
Regards
Anji -
Crystal reports- Calculation between two reports
Hi Experts
I have designed a sales and purchase transaction report using crystal reports and i have designed another report for accounting transactions like Excise Duty payable and receivables, Vat payable and receivables, Expenses(like EB, Maintenance) and so on. Finally I added accounting report as sub-report into First Report.
My question is, is it possible to made some calculations between sub-report and main report.
Hope some solutions from you.
By
KalaHello,
right upto the linking is good?
Right now you have to create a formula (which you might have already done for "Total expenses", you just need to alternate it slightly.
Example:
On 2nd report (subreport) You might have a formula like given below.
Instead of Numbervar CAvg, which is the last shown value in the below formula, you have to make it like Shared Numbervar CAvg.
Whileprintingrecords;
Numbervar TJs;
Numbervar TotalJobs=0;
Shared Numbervar CAvg;
Shared Numbervar CAvg=0;
TotalJobs := DistinctCount({lab_credits.credit_no},{lab_credits.reason_code});
CAvg:= TotalJobs /{@WorkingDays};
TJs:=TJs + CAvg;
CAvg
Do your calculation above.
Now in the main report you will create another formula which will look like below.
Whileprintingrecords;
Shared Numbervar CAvg;
Numbervar TAvg:=fieldname;
Numbervar TotalBoth:= Shared Numbervar CAvg+ Numbervar TAvg;
TotalBoth;
You will have a reset formula which will be placed ontop of the report header , group header if you are using grouping like this
Whileprintingrecords;
Shared Numbervar CAvg:=0;
SHared Numbervar TAvg:=0;
bearing in mind that we do not have to declare CAvg field here as it is being shared.
Hope this helps
Regards
Jehanzeb -
SolMon 3.2, Difference between SolMon report and Service .sap report?
Hi Guys,
last week i found one strange thing, there are differences between the reports of our local SoMon server report and report from service.sap (service message).
why there will be difference like this, Please help me in this regards.
Regards
SriniSoftware Components for SAP Solution Manager 4.0 as of April 2007.
SAP_BASIS 700 Basis Component
SAP_ABA 700 Cross-Application Component
PI_BASIS 2005_1_700 PI_BASIS 2005_1_700
ST-PI 2005_1_700 SAP Solution Tools Plug-In
SAP_BW 700 SAP NetWeaver BI 7.0
SAP_AP 700 SAP Application Platform
BBPCRM 500 BBPCRM
CPRXRPM 400 SAP xRPM/cProjects/cFolders 4.00 (ABAP)
ST 400 SAP Solution Manager Tool
ST-A/PI 01I_CRM500 Application Servicetools for CRM 500
ST-ICO 150_700 SAP Solution Manager Implementation Content
ST-SER 700_2006_2 SAP Solution Manager Service Tools
ST (Solution Manager Infrastructure, tx solution_manager, SOLAR01)
ST-A/PI (Download modules to get data for service sessions, monitoring)
ST-ICO (Implementation Content - Business Process Repository)
ST-SER (Service Sessions as EarlyWatch Alert, SAP GoingLive Check, Setup System Monitoring, Central System Administration, Setup Business Process Monitoring, Service Level Reporting, ....)
See also SAP Notes:
- 707705 (www.service.sap.com/sap/support/notes/706705) for an explanation on Components for Messages (with lots of key words).
- 394616 (www.service.sap.com/sap/support/notes/394616) Release strategy for SAP Solution Manager
Best regards
Ruediger -
Difference between class report and interactive report
please give me the differences between classical report and interactive report
Hi,read the following :
In ABAP, there are a total of 7 types of reports. They are:
Classical Reports
Interactive Reports
Logical Database Reports
ABAP query
ALV Reports (ALV stands for ABAP List Viewer)
Report Writer/Report Painter
Views (There are different types of views also)
Classical Reports
These are the most simple reports. It is just an output of data using the Write statement inside a loop.
Classical reports are normal reports. These reports are not having any sub reports. IT IS HAVING ONLY ONE SCREEN/LIST FOR OUTPUT
Interactive Reports
As the name suggests, the user can Interact with the report. We can have a drill down into the report data. For example, Column one of the report displays the material numbers, and the user feels that he needs some more specific data about the vendor for that material, he can HIDE that data under those material numbers.
And when the user clicks the material number, another report (actually sub report/secondary list) which displays the vendor details will be displayed.
We can have a basic list (number starts from 0) and 20 secondary lists (1 to 21).
Logical Database Reports
Logical database is another tool for ABAP reports. Using LDB we can provide extra features for ABAP reports.
While using LDB there is no need for us to declare Parameters.
Selection-screen as they will be generated automatically.
We have to use the statement NODES in ABAP report.
ABAP Query Reports
ABAP query is another tool for ABAP. It provides efficency for ABAP reports. These reports are very accurate.
Transaction Code : SQ01
Report Writer / Report painter
Super users and end users can use Report Painter/Report Writer tools to write their own reports.
Giving them the ability to report on additional fields at their discretion shifts the report maintenance burden to them, saving SAP support groups time and effort normally spent creating and maintaining the reports.
ALV reports
Sap provides a set of ALV (ABAP LIST VIEWER) function modules which can be put into use to embellish the output of a report. This set of ALV functions is used to enhance the readability and functionality of any report output. Cases arise in sap when the output of a report contains columns extending more than 255 characters in length.
In such cases, this set of ALV functions can help choose selected columns and arrange the different columns from a report output and also save different variants for report display. This is a very efficient tool for dynamically sorting and arranging the columns from a report output.
The report output can contain up to 90 columns in the display with the wide array of display options.
There is no difference between drill down and interactive report, they are the same.
With drilldown reporting, SAP provides you with an interactive information system to let you evaluate the data collected in your application. This information system is capable of analyzing all the data according to any of the characteristics that describe the data. You can also use any key figures you wish to categorize your data. You can display a number of objects for a given key figure, or a number of key figures for a given object. In addition, the system lets you carry out any number of variance analyses (such as plan/actual comparisons, fiscal year comparisons, comparisons of different objects, and so on).
*More on Classical Vs Interactive*
Classical Reports
These are the most simple reports. Programmers learn this one first. It is just an output of data using the Write statement inside a loop.
Classical reports are normal reports. These reports are not having any sub reports. IT IS HAVING ONLY ONE SCREEN/LIST FOR OUTPUT.
Events In Classical Reports.
INTIALIZATION: This event triggers before selection screen display.
AT-SELECTION-SCREEN: This event triggers after proccesing user input still selection screen is in active mode.
START OF SELECTION: Start of selection screen triggers after proceesing selection screen.
END-OF-SELECTION : It is for Logical Database Reporting.
Interactive Reports
As the name suggests, the user can Interact with the report. We can have a drill down into the report data. For example, Column one of the report displays the material numbers, and the user feels that he needs some more specific data about the vendor for that material, he can HIDE that data under those material numbers.
And when the user clicks the material number, another report (actually sub report/secondary list) which displays the vendor details will be displayed.
We can have a basic list (number starts from 0) and 20 secondary lists (1 to 21).
Events associated with Interactive Reports are:
1. AT LINE-SELECTION
2. AT USER-COMMAND
3. AT PF<key>
4. TOP-OF-PAGE DURING LINE-SELECTION.
HIDE statement holds the data to be displayed in the secondary list.
sy-lisel : contains data of the selected line.
sy-lsind : contains the level of report (from 0 to 21)
Interactive Report Events:
AT LINE-SELECTION : This Event triggers when we double click a line on the list, when the event is triggered a new sublist is going to be generated. Under this event what ever the statements that are been return will be displayed on newly generated sublist.
AT PFn: For predefined function keys...
AT USER-COMMAND : It provides user functions keys.
TOP-OF-PAGE DURING LINE-SELECTION :top of page event for secondary list.
Reward if found helpful -
Difference between Crsytal Report 2011 and Crystal Report for Enterprise 4
difference between Crystal Report 2011 and Crystal Report for Enterprise 4.0?
I think Crystl Reprt 2011 has more function, is it right?Hi,
I recently attended a SAP Virtual trianing on SAP Business Objects BI 4.0.
Here are few extracts from that which probably shows some light to you:
SAP Crystal Reports 2011
1. UI and associated processing servers remain the same as CR 2008
2. Incremental update to CR 2008 with a few new features*
3. Continue to provide current CR 2008 functionality as-is for existing customers
SAP Crystal Reports for Enterprise 4.0
1. Major update & redesign of the Crystal Reports Designer and associated processing servers
2. Focus on streamlined report design, reporting against BI 4.0 Universe, & reporting against SAP BW data
3. Provide the foundation for all future releases of Crystal Reports
Differences between these two releases:
Data Source & Usage Type General Recommendation
1. SAP BusinessObjects BI 4.0 SAP Crystal Reports Relational Universe (UNX) for Enterprise
OLAP Universe (UNX)
2. SAP NetWeaver BW 7 BEx Query (BICS) SAP Crystal Reports for Enterprise
3. SAP NetWeaver BW 3.5 BEx Query SAP Crystal Reports 2011
4. SAP Profitability Cost Management SAP Crystal Reports for Enterprise through Analysis View
SAP Strategy Management
SAP Budget, Planning and Consolidation
SAP Extended Analytics
5. Platform Driven Alerting SAP Crystal Reports for Enterprise
6. Business Views SAP Crystal Reports 2011
7. Direct RDBMS or OLAP access SAP Crystal Reports 2011
SAP ERP/ Live Office Content/
Enterprise search content
Regards
Gowtham -
OR between groups in Row-Restrictions, priority - Universe Design
Old School Univers Design, no SAP source, but plain Oracle
Two Questions here
1 - Priority in rowrestrictions
from documentation:
u201CYou can specify which restriction to apply to a user that belongs to multiple groups using a universe. For example a user belongs to two groups, Sales with a restriction to view 5000 rows of data, and Marketing to view 10000 rows. When the user refreshes a report, the restriction associated with the lowest level group is applied. In the example above, if the Sales group had order 1 and Marketing had order 2, the restriction from marketing (10000) would be used.u201D
I read in the documentation for Rowrestrictions, that the restriction on top of the order list will be the one kicking in, in case of a huser having two conflicting restrictions.
Does anyone have experience with this ?
Does it work ?
My experience is that its not working. Both rowrestrictions gets into the SQL with AND between as shown
AND ( FLEX_SEGMENT5.FLEX_VALUE IN (030,033,090,805,041,062,048)
AND FLEX_SEGMENT5.FLEX_VALUE IN (041,048,062)
the first line is my new restriction with priority 1,
the second line is the other restriction with priority 6
2 - OR between groups
there is a Restriction option in Manage Rowrestrictions , where you can spesify Rowrestriction Combinations using AND or OR.
I have not been able to have this working.
Anyone having a positive experience here ? Or have I misunderstood what this actually means.
I would expect
WHERE ( FLEX_SEGMENT5.FLEX_VALUE IN (030,033,090,805,041,062,048)
OR FLEX_SEGMENT5.FLEX_VALUE IN (041,048,062)
What I get is
( FLEX_SEGMENT5.FLEX_VALUE IN (030,033,090,805,041,062,048)
AND FLEX_SEGMENT5.FLEX_VALUE IN (041,048,062)
Is this a known bug ?
I have tried this in WEBI 3.1 and R2Hello,
In fact, Priority is used for universe overload where only one overload among several might apply. This is the case for connection overloads, table mappings..., but not for row restrictions.
For row restrictions, you have AND/OR aggregation operators. In Universe design tool, you have the option to choose how Row restriction will aggregate (click the "cog" icon):
+ Combine row restrictions using AND
+ Combine row restrictions using AND within group hierarchies and OR between groups
In the first case, all row restrictions that might apply to a user will be aggregated with AND operators.
In the second case, row restrictions that are inherited are aggregated with AND operators and the ones coming the user groups a user belongs to are aggregated with OR operators.
Ex with the following user groups organisation:
G1
G11 (G11 belongs to G1 group)
G2
G21 (G21 belongs to G2 group)
and user U belongs to G11 and G21 user groups.
Final row restriction that applies to the user U is:
(G1 AND G11) OR (G2 AND G21)
Hope it helps.
Cheers
~~cas -
Address book won't let me switch between groups
OK, so I'm trying to send an email to a specific group "the guys", so I open a new message, hit address book to get my contacts and it's on all contacts. I try to switch to a different group, "the guys" and it won't. I tap on "the guys" and it just stays on all contacts. It also won't add anyone when I tap on all contacts.
I quit mail, open it again and try the same, this time I can switch groups. Now though, it only adds in the contact that was highlighted in all contacts. So I tap one of the contacts in "the guys" and try again, now it only adds him... not the other guys. So I highlight all the guys and tap them to add them in, this works.
That is, it works until I need to send another email... then it's the whole stupid process all over again.
I just moved up to snow leopard a few days ago... is there something I'm doing wrong? I don't get it...
Side note... I can switch between groups at will when I open the application for Address book. What a pain though!Hmm, anyone have any ideas or similar experiences? I tried getting answers in another thread that seemed to have some similarities but it was suggested that I start my own thread. It looks like I've gotten a lot of views here but no answers.... Anyone? Help!
Thanks for lookin! -
Error: process-uri-objects reports: HTTP2020: cannot find template default
Error
process-uri-objects reports: HTTP2020: cannot find template default
Migrated from v4 to 6 but getting this error.Here is the obj.conf from migrated SSL server 6.0 sp5
$ more obj.conf
# Netscape Communications Corporation - obj.conf
# You can edit this file, but comments and formatting changes
# might be lost when the admin server makes changes.
<Object name="weblogic" ppath="*/ts/*">
Service fn="wl-proxy" WebLogicCluster="xxx.xxx.x.xx:yyyy,xxx.xxx.x.xx:yyyy" PathTrim="/ts" ErrorPage="htt
p://ips.chase.com/Xcelerate/wlNotUp.html"
</Object>
<Object name="weblogic" ppath="*/jbs/*">
Service fn="wl-proxy" WebLogicCluster="xxx.xxx.x.xx:yyyy,xxx.xxx.x.xx:yyyy" PathTrim=""
</Object>
<Object name="si" ppath="*/servletimages/*">
Service fn="wl-proxy" WebLogicCluster="xxx.xxx.x.xx:yyyy,xxx.xxx.x.xx:yyyy"
NameTrans fn="NSServletNameTrans" name="servlet"
NameTrans fn="pfx2dir" from="/servlet" dir="/opt/netscape/servers/docs/servlet" name="ServletByExt"
NameTrans fn="pfx2dir" from="/manual" dir="/opt/netscape/servers/manual/https" name="es-internal"
NameTrans fn="pfx2dir" from="/ns-icons" dir="/opt/netscape/servers/ns-icons" name="es-internal"
NameTrans fn="pfx2dir" from="/mc-icons" dir="/opt/netscape/servers/ns-icons" name="es-internal"
NameTrans fn="pfx2dir" from="/help" dir="/opt/netscape/servers/manual/https/ug" name="es-internal"
NameTrans fn="pfx2dir" from="/ns-icons" dir="/opt/netscape/servers/ns-icons" name="es-internal"
NameTrans fn="pfx2dir" from="/mc-icons" dir="/opt/netscape/servers/ns-icons" name="es-internal"
NameTrans fn="pfx2dir" from="/help" dir="/opt/netscape/servers/manual/https/ug" name="es-internal"
NameTrans fn="pfx2dir" from="/cgi-bin" dir="/opt/netscape/suitespot/docs/cgi-bin" name="cgi"
NameTrans fn=document-root root="$docroot"
PathCheck fn="unix-uri-clean"
PathCheck fn="check-acl" acl="default"
PathCheck fn="find-pathinfo"
PathCheck fn="find-index" index-names="index.html,home.html"
ObjectType fn="type-by-extension"
ObjectType fn="force-type" type="text/plain"
Service method="(GET|HEAD|POST|PUT)" type="text/jsp" fn="wl-proxy" WebLogicCluster="xxx.xxx.x.xx:yyyy,xxx.xxx.x.xx:yyyy"
Service method="(GET|HEAD)" type="magnus-internal/imagemap" fn="imagemap"
Service method="(GET|HEAD)" type="magnus-internal/directory" fn="send-error"
Service method="(GET|HEAD)" type="*~magnus-internal/*" fn="send-file"
AddLog fn="flex-log" name="access"
</Object>
<Object name="cgi">
ObjectType fn="force-type" type="magnus-internal/cgi"
Service fn=send-cgi user="$user" group="$group" chroot="$chroot" dir="$dir" nice="$nice"
</Object>
</Object>
<Object name="maintpwreset" ppath="*/maintpwreset/*">
Service fn="wl-proxy" WebLogicHost="xxx.xxx.x.xx" WebLogicPort="yyyy"
</Object>
<Object name="pwreset" ppath="*/pwreset/*">
Service fn="wl-proxy" WebLogicHost="xxx.xxx.x.xx" WebLogicPort="yyyy"
</Object>
<Object name="servlet">
ObjectType fn=force-type type=text/html
Service fn="NSServletService"
</Object>
<Object name="jsp092">
ObjectType fn="type-by-extension"
ObjectType fn="change-type" type="magnus-internal/jsp092" if-type="magnus-internal/jsp"
Service fn="NSServletService" type="magnus-internal/jsp092"
</Object>
<Object name="ServletByExt">
ObjectType fn=force-type type=magnus-internal/servlet
Service type="magnus-internal/servlet" fn="NSServletService"
</Object>
<Object name="es-internal">
PathCheck fn="check-acl" acl="es-internal"
</Object>
$
Back end is a weblogic cluster, I have used xxx at place of IP and yy for port.
Here is last few config lines from magnus.conf
Init fn="load-modules" shlib="/opt/netscape/servers/bin/https/lib/libNSServletPlugin.so" funcs="NSServlet
EarlyInit,NSServletLateInit,NSServletNameTrans,NSServletService" shlib_flags="(global|now)"
Init fn="NSServletEarlyInit" EarlyInit=yes
Init fn="NSServletLateInit" LateInit=yes
Init fn="flex-init" access="/opt/netscape/servers/https-secure-xxxxxxx/logs/access" format.access="%Ses
->client.ip% - %Req->vars.auth-user% [%SYSDATE%] \"%Req->reqpb.clf-request%\" %Req->srvhdrs.clf-status% %
Req->srvhdrs.content-length%"
Init fn="load-types" mime-types="mime.types"
Init fn="load-modules" funcs="wl-proxy,wl-init" shlib="/weblogic/lib/solaris/libproxy.so"
Init fn="wl-init"
Thanks -
Diff between normal report and Smart forms
Hi Experts,
I am a fresher, i have only a basic knowledge in sap. please help me to improve my knowledge...
I have some doubts???
1) What the difference between normal report(created using SE38 interactive and classic) and smart forms report???
2) whether we will use any even in script and smart form???
Please do the needfull...
thaneshHi
in smartforms and in scripts we write a driver program to execute the smatform /script.
we can write the code in the smartform iteself also.
1. The adaption of forms is supported to a large extent by graphic tools for layout and logic, so that no programming knowledge is necessary (at least 90% of all adjustments). Therefore, power user forms can also make configurations for your business processes with data from an SAP system. Consultants are only required in special cases.
2. Displaying table structures (dynamic framing of texts)
3. Output of background graphics, for form design in particular the use of templates which were scanned.
4. Colored output of texts
5. User-friendly and integrated Form Painter for the graphical design of forms
6. Graphical Table Painter for drawing tables
7. Reusing Font and paragraph formats in forms (Smart Styles)
8. Data interface in XML format (XML for Smart Forms, in short XSF)
9. Form translation is supported by standard translation tools
10. Flexible reuse of text modules
11. HTML output of forms (Basis release 6.10)
12. Interactive Web forms with input fields, pushbuttons, radio buttons, etc -
An applescript to Process a group of files whose date 2 sec ?
Hello,
I am back for a new question, maybe a little more simple..
Here is the new problem :
I import on the hardDrive pictures taken from my camera, as Raw files. All the pictures are imported in the same folder (sometimes more than hundred of pictures) and would like to batch process all pictures, because :
Each photo have 3 versions of itself (bracketing), to make one Hdr picture.
With the bracketing, each photo is taken with an interval < 2sec max.
I would like to make an applescript to do the following job :
From Import folder,
compare date of each files ( the pictures)
and if the date/Time between files is < 2 sec
then process these files together (or group them, or make new folder with these images)
and / or process each group of pictures whose creation date <2sec.
--> this way to process the first 3 pictures, once finished, process the secound group of 3 pictures, etc, until the end.
Is someone has the solution to write this in applescript ?
ThankYou very much !Maybe you might want to try the following script as a starting point.
The script assumes that your import folder contains only raw files, and that every photo has three versions of itself. For example, if the folder contains 33 photos, that means it contains exactly 99 raw files, and no other files.
Don't forget to make a backup of your import folder before running the script
set theImportFolder to choose folder
tell application "Finder"
set theSortedList to sort files of theImportFolder by creation date
set theSortedList to reverse of theSortedList -- ascending order
-- Group all the RAW files by 3:
set theRawFilesBy3 to {} -- the raw files, grouped by 3
set k to 0
repeat while k < (count theSortedList)
set threeVersions to {}
repeat 3 times
set k to k + 1
set thisItem to item k of theSortedList
copy thisItem as alias to the end of threeVersions
end repeat
copy threeVersions to the end of theRawFilesBy3
end repeat
-- Move each group of three RAW files to a new folder:
repeat with these3Files in theRawFilesBy3
set TID to AppleScript's text item delimiters
set AppleScript's text item delimiters to "."
get name of item 2 of these3Files
set theName to (text items 1 through -2 of result) as text
set AppleScript's text item delimiters to TID
try
make new folder in theImportFolder with properties {name:theName}
move (these3Files as list) to result
end try
end repeat
end tell
Message was edited by: Pierre L. (the first line of the script was missing) -
Hello all-
I am currently trying to configure group policy (specifically folder redirects) from a new Windows Server 2008 in my home... the server acts as both an AD DS and file server for 4 client computers, all running Windows Vista Ultimate.
Here are the steps I am currently taking:
I create a new Group Policy called All Users and Computers and apply it to the All Users and Computers OU, which contains exactly what it says (all users and computers in the domain).
I verify that a new folder was created in \\<FQDN>\sysvol\<FQDN>\Policies. The new folder created is named {6479C8E0-3134-4B4F-B047-7ADD51684684}
I change the GPO Enforced setting to Enforced.
I attempt to use the gpupdate command to see if the group policy can be updated successfully. In a command prompt, I type gpupdate <enter>. I receive the message 'Updating Policy...' then after about 15 seconds the message 'User Policy update has completed successfully.'
I keep the cmd window open. After about 10 seconds another message apperas which says "Computer policy could not be updated successfully. The following errors were encountered: The processing of Group Policy failed. Windows attempted to read the file \\<FQDN>\sysvol\<FQDN>\Policies\{6AC1786C-016F-11D2-945F-00C04Fb984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
To diagnose the failure, review the event log or invoke gpmc.msc to access information about Group Policy results."
I confirm that the error code is #3 using the Event Log, "The system cannot find the file specificed"
Of course the system cannot find the file specified because the folder does not exist in the sysvol folder. I am wondering why Windows is trying to read from this location when it does not exist, and is not the new group policy I created! I have no other group policies linked or enforced to any other OU/Domain/etc. Any help resolving this issue would be greatly appreciated.Hello all and thanks for the help. First a few things:
I understand that the DC should not be running RRAS, but this a simple server being used in aa home environment by 4 users and getting another server just for RRAS would be overkill.
Secondly, I currently have it so that while the router is handling DHCP, I have reserved a fixed IP for the server, so it always has 192.168.1.100. If I were to use the server as the DHCP, what would my hardware configuration have to look like? I currently have the router plugged into the ISP modem, and then server plugged into the router. All other clients connect to the router wirelessly.
Here's the dcdiag output. I tried dcdiag /fix but to no avail.
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
* Verifying that the local machine KELLERDCFS, is a Directory Server.
Home Server = KELLERDCFS
* Connecting to directory service on server KELLERDCFS.
* Identified AD Forest.
Collecting AD specific global data
* Collecting site info.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=keller-pa,DC=net,LDAP_SCOPE_SUBTREE,(objectCategory=ntDSSiteSettings),.......
The previous call succeeded
Iterating through the sites
Looking at base site object: CN=NTDS Site Settings,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
Getting ISTG and options for the site
* Identifying all servers.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=keller-pa,DC=net,LDAP_SCOPE_SUBTREE,(objectClass=ntDSDsa),.......
The previous call succeeded....
The previous call succeeded
Iterating through the list of servers
Getting information for the server CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
* Identifying all NC cross-refs.
* Found 1 DC(s). Testing 1 of them.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\KELLERDCFS
Starting test: Connectivity
* Active Directory LDAP Services Check
Determining IP4 connectivity
Determining IP6 connectivity
* Active Directory RPC Services Check
......................... KELLERDCFS passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\KELLERDCFS
Starting test: Advertising
The DC KELLERDCFS is advertising itself as a DC and having a DS.
The DC KELLERDCFS is advertising as an LDAP server
The DC KELLERDCFS is advertising as having a writeable directory
The DC KELLERDCFS is advertising as a Key Distribution Center
The DC KELLERDCFS is advertising as a time server
The DS KELLERDCFS is advertising as a GC.
......................... KELLERDCFS passed test Advertising
Test omitted by user request: CheckSecurityError
Test omitted by user request: CutoffServers
Starting test: FrsEvent
* The File Replication Service Event log test
Skip the test because the event log File Replication Service does not exist.
......................... KELLERDCFS passed test FrsEvent
Starting test: DFSREvent
The DFS Replication Event Log.
......................... KELLERDCFS passed test DFSREvent
Starting test: SysVolCheck
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... KELLERDCFS passed test SysVolCheck
Starting test: KccEvent
* The KCC Event log test
Found no KCC errors in "Directory Service" Event log in the last 15 minutes.
......................... KELLERDCFS passed test KccEvent
Starting test: KnowsOfRoleHolders
Role Schema Owner = CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
Role Domain Owner = CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
Role PDC Owner = CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
Role Rid Owner = CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
Role Infrastructure Update Owner = CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
......................... KELLERDCFS passed test KnowsOfRoleHolders
Starting test: MachineAccount
Checking machine account for DC KELLERDCFS on DC KELLERDCFS.
* SPN found :LDAP/KELLERDCFS.keller-pa.net/keller-pa.net
* SPN found :LDAP/KELLERDCFS.keller-pa.net
* SPN found :LDAP/KELLERDCFS
* SPN found :LDAP/KELLERDCFS.keller-pa.net/KELLER-PA
* SPN found :LDAP/42268b36-801f-4a6d-b162-34f3b01e04bb._msdcs.keller-pa.net
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/42268b36-801f-4a6d-b162-34f3b01e04bb/keller-pa.net
* SPN found :HOST/KELLERDCFS.keller-pa.net/keller-pa.net
* SPN found :HOST/KELLERDCFS.keller-pa.net
* SPN found :HOST/KELLERDCFS
* SPN found :HOST/KELLERDCFS.keller-pa.net/KELLER-PA
* SPN found :GC/KELLERDCFS.keller-pa.net/keller-pa.net
......................... KELLERDCFS passed test MachineAccount
Starting test: NCSecDesc
* Security Permissions check for all NC's on DC KELLERDCFS.
* Security Permissions Check for
DC=ForestDnsZones,DC=keller-pa,DC=net
(NDNC,Version 3)
* Security Permissions Check for
DC=DomainDnsZones,DC=keller-pa,DC=net
(NDNC,Version 3)
* Security Permissions Check for
CN=Schema,CN=Configuration,DC=keller-pa,DC=net
(Schema,Version 3)
* Security Permissions Check for
CN=Configuration,DC=keller-pa,DC=net
(Configuration,Version 3)
* Security Permissions Check for
DC=keller-pa,DC=net
(Domain,Version 3)
......................... KELLERDCFS passed test NCSecDesc
Starting test: NetLogons
* Network Logons Privileges Check
Verified share \\KELLERDCFS\netlogon
Verified share \\KELLERDCFS\sysvol
......................... KELLERDCFS passed test NetLogons
Starting test: ObjectsReplicated
KELLERDCFS is in domain DC=keller-pa,DC=net
Checking for CN=KELLERDCFS,OU=Domain Controllers,DC=keller-pa,DC=net in domain DC=keller-pa,DC=net on 1 servers
Object is up-to-date on all servers.
Checking for CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net in domain CN=Configuration,DC=keller-pa,DC=net on 1 servers
Object is up-to-date on all servers.
......................... KELLERDCFS passed test ObjectsReplicated
Test omitted by user request: OutboundSecureChannels
Starting test: Replications
* Replications Check
* Replication Latency Check
......................... KELLERDCFS passed test Replications
Starting test: RidManager
* Available RID Pool for the Domain is 1600 to 1073741823
* KELLERDCFS.keller-pa.net is the RID Master
* DsBind with RID Master was successful
* rIDAllocationPool is 1100 to 1599
* rIDPreviousAllocationPool is 1100 to 1599
* rIDNextRID: 1111
......................... KELLERDCFS passed test RidManager
Starting test: Services
* Checking Service: EventSystem
* Checking Service: RpcSs
* Checking Service: NTDS
* Checking Service: DnsCache
* Checking Service: DFSR
* Checking Service: IsmServ
* Checking Service: kdc
* Checking Service: SamSs
* Checking Service: LanmanServer
* Checking Service: LanmanWorkstation
* Checking Service: w32time
* Checking Service: NETLOGON
......................... KELLERDCFS passed test Services
Starting test: SystemLog
* The System Event log test
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 17:53:59
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 17:59:02
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:04:04
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:09:06
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:14:08
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:19:10
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:24:12
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:29:15
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:34:17
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:39:19
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:49:23
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
......................... KELLERDCFS failed test SystemLog
Test omitted by user request: Topology
Test omitted by user request: VerifyEnterpriseReferences
Starting test: VerifyReferences
The system object reference (serverReference)
CN=KELLERDCFS,OU=Domain Controllers,DC=keller-pa,DC=net and backlink
on
CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
are correct.
The system object reference (serverReferenceBL)
CN=KELLERDCFS,CN=Topology,CN=Domain System Volume,CN=DFSR-GlobalSettings,CN=System,DC=keller-pa,DC=net
and backlink on
CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
are correct.
......................... KELLERDCFS passed test VerifyReferences
Test omitted by user request: VerifyReplicas
Test omitted by user request: DNS
Test omitted by user request: DNS
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : keller-pa
Starting test: CheckSDRefDom
......................... keller-pa passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... keller-pa passed test CrossRefValidation
Running enterprise tests on : keller-pa.net
Test omitted by user request: DNS
Test omitted by user request: DNS
Starting test: LocatorCheck
GC Name: \\KELLERDCFS.keller-pa.net
Locator Flags: 0xe00013fd
PDC Name: \\KELLERDCFS.keller-pa.net
Locator Flags: 0xe00013fd
Time Server Name: \\KELLERDCFS.keller-pa.net
Locator Flags: 0xe00013fd
Preferred Time Server Name: \\KELLERDCFS.keller-pa.net
Locator Flags: 0xe00013fd
KDC Name: \\KELLERDCFS.keller-pa.net
Locator Flags: 0xe00013fd
......................... keller-pa.net passed test LocatorCheck
Starting test: Intersite
Skipping site Default-First-Site-Name, this site is outside the scope
provided by the command line arguments provided.
......................... keller-pa.net passed test Intersite
Here's the nslookup from Vista client:
Microsoft Windows [Version 6.0.6001]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:\Users\Andrew>nslookup KELLERDCFS
Server: UnKnown
Address: 192.168.1.100
Name: KELLERDCFS.keller-pa.net
Addresses: 192.168.1.150
192.168.1.100
C:\Users\Andrew>
Thanks again! -
OBIEE 11G - Issue passing parameters between two reports
Hi folks,
I am struggling to pass parameters between two reports in OBIEE 11G.
My first report contains the following columns: Rolling Year Type (VCHAR), Year(VCHAR), Month(VCHAR), Cost(Double).
My second report contains the following columns: Rolling Year Type(VCHAR), Year(VCHAR), Month(VCHAR), Category(VCHAR), Cost(Double).
My requirement is to pass the Rolling Year Type, Year and Month values from report 1 to report 2.
On the Month column properties of report 1, I have created an Action Link called 'Drill to Category'. I have clicked on 'Navigate to BI Content' and selected Report 2.
Then on Report 2, I have included three filters: Rolling Year Type is prompted, Year is prompted, Month is promted.
When I run the report I always get the following error:
The specified criteria didn't result in any data. This is often caused by applying filters and/or selections that are too restrictive or that contain incorrect values. Please check your Analysis Filters and try again. The filters currently being applied are shown below.
When I check the cursor cache, the filter values are correct. Does anybody have any idea why Report 2 does not display?
When I remove the Month filter, the report works correctly.
I have since changed the third filter to be Month No and although Report 2 does display, it does not pick up the filter on the Month No.
I initially thought this may have been a caching issue and so I have disabled BI Server Cache but this does not fix my problem.
This was never an issue on OBIEE 10G as I found it very easy to navigate between two requests.
Has anyone else experienced problems with passing parameters between two request in 11G?
Any help appreciated.
Thanks
GavinHi,
I once tried this kind of requirement(with dashboard prompts though) and hit at similar issue. I later found out that the problem is with the space in the parameter values. Can you please let me know, if the same is the case with you?
Suppose the parameter passed is "Jan 2010", but the report on the destination takes the value as "Jan" & "2010". Yes, it kind of split the parameter value to two based on space. I think we can notice the filters the destination report got, by enabling filter view.
In this case, since you pass only value at a time, could you try placing the parameter value anyway in double quotes? I think the Server then will understand it as one value.
Thank you,
Dhar -
Honestly, I have never had a customer ask me 'how' do I identify which Items go together in a specific category. I am thinking I start with the Functional Area (Inv, PO, OM, WM, etc..) attributes, and start the grouping there. The customer is asking for "best practices" - any input would be appreciated.
I have a fresh install of Oracle Inventory, Purchasing, Order Management, Service - We have 2,000,000 part numbers.
How have you instructed your customers/clients (both Internal and External) in the PROCESS of categorizing all of their Items?
What is the Step-by-step process of grouping those 2MM items into accurate Category Sets and more accurately into the most correct Category.
I would 'assume' it would start with some analysis with all the Items listed with all the item attributes, and start with ECCN (for example) or Item Type grouping. Then...(?)
Thanks!
rdNo answer to No.1 but I really want to find it out too.
No.2
If you already know list of the categories & ID you can manually create a list of checkboxes
<input type="checkbox" name="CAT_Category" value="89081" />
<input type="checkbox" name="CAT_Category" value="89082" />
<input type="checkbox" name="CAT_Category" value="89083" />
something like that should work
Maybe you are looking for
-
Tax code input for Automatically Generated Line Items
Hi Guys, We want to input a tax code for the Automatically generated line item..for exchange rate differences in F-28. Once i simulate the F-28 , and i try to input the tax code in the Automatically generated line item for exchange rate difference, I
-
SOAP Adapter option is disabled in adapter monitoring
Hi I am trying a simple SOAP to FTP scenario. I have done all the steps in the repository as well as the directory and i have even activated it, but in adapter monitoring the SOAP adapter option is disabled. Hope someone could help me out on this. Th
-
Report on Production of the day?
Hello expert, Is it a standard Tcode or report can bring a list of production order details of the day, including component details? I'd like to use it as pick list (but I do not want to use WM).... Thx!!!
-
Mass updates for Notification/Workorder status
Is there any way for Mass update of 'status' because orders and notifications need to be un-teco before updating planner groups and work centers? we are using Mass update for IW58,IW38 & IW29 and there is no option for STATUS update.
-
Would I be able to use the Oracle Content Management SDK to build my own version of Oracle Files/Files Online/iFiles application but enforce security at the DB level (assuming all my content was labeled) instead of at the application level, using OLS