Process Chain excessive run time

Hi all
Would like to know if any of you have experienced what we are experiencing.
We have a process chain that runs every night. It is running the same master data which usually only takes seconds.
However, on occassions, the same amount of data is taking over 18 hours to load.
When we look on monitor in the detail tab, it shows that it has only taken seconds but the header tab is showing 18 hours. This then delays any other subsequent process chains from being kicked off.
We are investigating as to why this is happening but any comments would be appreciated.
thanks in advance
Sandra

Hi Sandra,
I can suggest you few things which may help u...
1) Increase the parallel processing during extraction
2) Selective loading.
3) Every job will be having a priority (A, B, C A being the highest and C being the lowest), choose this based on your scenario.
4) Check with basis for the sizing of your server.
5) You can increase the number of background processes during data loads. This can be done by making dialog processes as Background processes.
For this you need basis inputs. (This is done in some profile settings by making the system behave differently during loads. (something like day mode/night mode))
6) There are some maintenance jobs that should run regularly in any SAP box to ensure proper functioning.
7) Use of start routines is preferred instead of update routines.
Assign points if these help u...
Regards,
KK.

Similar Messages

The 0co_om_opa_6 ip in the process chains takes long time to run

Hi experts,
The 0co_om_opa_6 ip in the process chains takes long time to run around 5 hours in production
I have checked the note 382329,
-> where the indexes 1 and 4 are active
-> index 4 was not "Index does not exist in database system ORACLE"- i have assgined to " Indexes on all database systems and ran the delta load in development system, but guess there are not much data in dev it took 2-1/2 hrs to run as it was taking earlier. so didnt find much differnce in performance.
As per the note Note 549552 - CO line item extractors: performance, i have checked in the table BWOM_SETTINGS these are the settings that are there in the ECC system.
-> OLTPSOURCE - is blank
   PARAM_NAME - OBJSELSIZE
   PARAM_VALUE- is blank
-> OLTPSOURCE - is blank
   PARAM_NAME - NOTSSELECT
   PARAM_VALUE- is blank
-> OLTPSOURCE- 0CO_OM_OPA_6
   PARAM_NAME - NOBLOCKING
   PARAM_VALUE- is blank.
Could you please check if any other settings needs to be done .
Also for the IP there is selction criteris for FISCALYEAR/PERIOD from 2004-2099, also an inti is done for the same period as a result it becoming difficult for me to load for a single year.
Please suggest.

The problem was the index 4 was not active in the database level..it was recommended by the SAP team to activate it in se14..however while doing so we face few issues se14 is a very sensitive transaction should be handled carefully ... it should be activate not created.
The OBJSELSIZE in the table BWOM_SETTINGS has to be Marked 'X' to improve the quality as well as the indexe 4 should be activate at the abap level i.e in the table COEP -> INDEXES-> INDEX 4 -> Select the u201Cindex on all database systemu201D in place of u201CNo database indexu201D, once it is activated in the table abap level you can activate the same indexes in the database level.
Be very carefull while you execute it in se14 best is to use db02 to do the same , basis tend to make less mistake there.
Thanks Hope this helps ..

Process Chain takes alonf time to run

Hello All,
We have a process chain which loads data for texts, attributes etc.
On certain days the process chain will run extremely fast and maybe take a couple of hours, other days the same process chain may take 24 hours to run. It appears to get stuck when extracting the data from our source system.
Is there any reason for these strange performance issues and does any body else have the same problem? Is there anything that can be done about it?
Thanks,
Nick.

Hi Nick,
This error normally occurs whenever BW encounters error and is not able to classify them. There could be multiple reasons for the same
Whenever we are loading the Master Data for the first time, it creates SIDs. If system is unable to create SIDs for the records in the Data packet, we can get this error message.
If the Indexes of the cube are not deleted, then it may happen that the system may give the caller 70 error.
Whenever we are trying to load the Transactional data which has master data as one of the Characteristics and the value does not exist in Master Data table we get this error. System can have difficultly in creating SIDs for the Master Data and also load the transactional data.
If ODS activation is taking place and at the same time there is another ODS activation running parallel then in that case it may happen that the system may classify the error as caller 70. As there were no processes free for that ODS Activation.
It also occurs whenever there is a Read/Write occurring in the Active Data Table of ODS. For example if activation is happening for an ODS and at the same time the data loading is also taking place to the same ODS, then system may classify the error as caller 70.
It is a system error which can be seen under the Status tab in the Job Over View.
Cheers
Raj

How to setup process chains to run during office times every 30 minutes

I want to set up a process chain to run only during 8 am to 6 pm MST every 30 minutes. How do I do such a setting in the process chain?
Regards
Ram

Hello,
You can do this by creating a daemon chain which runs once every 30 mins and triggers a event.
You can use the event triggered by the daemon chain in the start variant of the PC which you require to run every 30 mins.
But before doing that, make sure that one run of your process chain completes definetly in 30 mins.
Let me know if you are looking for additional information.
Cheers,
MS.

BPM Process chain takes long time to process

We have BI7, Netweaver 2004s on Oracle and SUN Solaris
There is a process chain (BPM) which pulls data from the CRM system into BW. The scheduled time to run this chain is 0034 hrs. This chain should ideally complete before / around 0830 Hrs. <b>Now the problem is that every alternate day this chain behaves normally and gets completed well before 0830 hrs but every alternate day this chain fails</b> there are almost 40 chains running daily. Some are event triggered (dependent with each other) or some run in parallel. In this, (BPM) process chain, usually there are 5 requests with 3 Delta and 2 full uploads (Master Data). The delta uploads finishes in 30 minutes without any issues with very few record transfers. The first full upload is from 0034 hrs to approximately 0130 hrs and the 2nd upload is from 0130 hrs to 0230 hrs. Now if the 1st upload gets delayed then the people who are initiating these chains, stop the 2nd full upload and continue it after all the process chains are completed. Now this entire BPM process chain sometimes takes 17 -18 hrs to complete!!!!!
No other loads in CRM or BW when these process chains are running
CRM has background jobs to push IDOCS to BW which run every 2 minutes which runs successfully
Yesterday this chain got completed successfully (well within stipulated time) with over 33,00,000 records transferred but sometimes it has failed to transfer even 12,00,000 records!!
Attaching a zip file, please refer the 21 to 26 Analysis screen shot.doc from the zip file
Within the zip file, attaching Normal timings of daily process chains.xls the name explains it.
Also within the zip file refer BPM Infoprovider and data source screen shot.doc please refer this file as the infopackage (page 2) which was used in the process chain is not displayed later on in page number 6 BUT CHAIN GOT SUCESSFULLY COMPLETED
We have analyzed:--
1)     The PSA data for BPM process chain for past few days
2)     The info providers for BPM process chain for past few days
3)     The ODS entries for BPM process chain for past few days
4)     The point of failure of BPM process chain for past few days
5)     The overall performance of all the process chains for past few days
6)     The number of requests in BW for this process chain
7)     The load on CRM system for past few days when this process chain ran on BW system
As per our analysis, there are couple of things which can be fixed in the BW system:--
1)     The partner agreement (transaction WE20) defined for the partner LS/BP3CLNT475 mentions both message types RSSEND and RSINFO: -- collect IDOCs and pack size = 1 Since the pack size = 1 will generate 1 TRFC call per IDOC, it should be changed to 10 so that less number of TRFCs will be generated thus less overhead for the BW server resulting in the increase in performance
2)     In the definition of destination for the concerned RFC in BW (SM59), the Technical Setting tab says the Load balancing option = No. We are planning to make it Yes
But we believe that though these changes will bring some increase in performance, this is not the root cause of the abnormal behavior of this chain as this chain runs successfully on every alternate day with approximately the same amount of load in it.
I was not able to attach the many screen shots or the info which I had gathered during my analysis. Please advice how do I attach these files
Best Regards,

Hi,
Normally index creation or deletion can take long time in case your database statistics are not updated properly, so can check stat after your data loading is completed and index generation is done, Do creation of database statistics.
Then try to recheck ...
Regards,
Satya

Process Chain changing start time?

hi guysm i have 76 process chains that run every day in BWD system, so i removed all the timings from the start variant and in the infopackages, but it seems some process chains are still running, i did do the following steps on chnaging the time from a particular time to immediate, Save, Check and activate, i didnt schedule it as i dont want it to load right away .
do i have to hit check , save , schedule once i change the time from a particular time to immediate load or activate will work as well.?
what else could be the cause of process chains still loading even there are no events, or time given to any process chains at all.
i went to sm 37 and i can see the bi process are all running at the time they were orignially set up on.
so any suggestions would help,
is there any way from sm 37 i can tell which process chain is triggered off?
thanks
Dante(devils never cry)

Dante, the start conditions on the infopackages do not affect when they run in process chains. The process chains have their own start job. If you want to change the start time of a process chain, then you need to go to maintain the process chain, right-click on the Start process and select Displaying Scheduled Job(s)... . Here you will see a job called BI_PROCESS_TRIGGER. Change the start conditions of this job.
The start job for all process chains is BI_PROCESS_TRIGGER, so using SM37 may be difficult to identify which BI_PROCESS_TRIGGER job is associated to a particular chain.
Also, to let you know, each process in a process chain has an associated job. All jobs called BI_PROCESS_xxxxx are jobs associated with a process chain.
Eg.
BI_PROCESS_LOADING is an infopackage.
BI_PROCESS_TRIGGER is the start job
Does this help?

Why the process chain always run twice when triggered from R3?

I run a program from R3 by calling the remote function 'RSSM_EVENT_RAISE' on BW to trigger an event and in turn the event on BW bring up the running of a process chain. But whenever I run the program on R3 to bring up the running of the process chain, I find the process chain always run twice at the same time. Does anybody knows the answer?
And also I would like to know the functionalities of the two picture buttons "Activate" and "Activate and Schedule" in process chain. In which case the "Activate" button should be used and in which case, the "Activate and Schedule" button should be used? If we click the Start variant of a process chain, then click "Change Selections" button which bring up the window "Start Time" where the buttons "Immediate", "Date/Time", "After job", and "After event" are listed at the top. If we modify at any of the above buttons, then after save this modification, we will have to click "Activate and Schedule" button to make it work, right?
Thanks a lot and everyone's idea is greatly appreciated!

Kevin, make sure there is only one job scehduled for the Start Process of your Process Chain. If you bring up the Process Chain (not the log view), right click on the Start Process and select "Displaying Scheduled Job(s)...". There should only be one scheduled job with name BI_PROCESS_TRIGGER. If there is more than one, then when triggered, it would execute more than once at the same time. If there is only one job, then maybe your R/3 program is triggering the event more than once?
As far as the Start conditions for the Start Process, it works off the same principals as a scheduled job. These start conditions determine when or how the Process Chain is to be executed. You also have control over frequency. These start conditions determine the scheduling of the Start Process of your Process Chain.
When you schedule a Process Chain, a separate scheduled job is created for "each" process in the Chain. BW controls the triggering of these jobs based upon how the processes in the Chain are linked. All the jobs associated with Process Chains have strict naming conventions and all begin with BI_PROCESS_... If you use SM37 to view all jobs that begin with BI_PROCESS_ you will find alot of scheduled jobs associated with your process chains. Each job represents one of the processes within your process chains.
Does this help?
Another tip might be to trigger the event manually in BW (use tx SM64). If the process chain executes twice again, then maybe there is a separate scheduled job in BW that triggers the process chain that is triggered by the same event as the start process of the process chain.
Message was edited by: George Shannon

Delete Index in Process Chain Takes long time after SAP BI 7.0 SP 27

After upgrading to SAP BI 7.0 SP 27 Delete index Process & Create index process in Process chain takes long time.
For example : Delete index for 0SD_C03 takes around 55 minutes.
Before SP upgrade it takes around 2 minutes to delete index from 0SD_C03.
Regards
Madhu P Menon

Hi,
Normally index creation or deletion can take long time in case your database statistics are not updated properly, so can check stat after your data loading is completed and index generation is done, Do creation of database statistics.
Then try to recheck ...
Regards,
Satya

Can I change a process flow at run time??

Hello everybody,
I work in Oracle BPMS 11.1.1.5. I need to change a process flow at run time due to changes in the business logic, I mean add, delete and modify tasks, navigation flow, etc. I know business rules can be modified using Oracle BPM Composer, but I couldn't find the way to modify the process flow. I have seen other BPMS, like BizAgi, for ex. that can do that. Do Oracle BPMS have that functionality? Please I need it a lot!!!!
Regards and thanks in advance,
isabelbernely

Hi
As JonPetter mentioned, you can get this and preferably get only from Support. I hope you have some license if you going to prod with this. Use that and if possible talk to your sales guy and create a support account. Then request the feature pack. The thing is, if we put it in some public shared location, it is the violation of using the oracle product. Unless someone takes risks they may upload but still its not advisable.
Sorry
Ravi Jegga

R3 job completion trigger a process chain to run on BW

Hello,
I was wondering how I can trigger a process chain to run on BW 3.5 after a SM37 job completes on R3?
I have been searching the forums and the web, but I haven't found what I am looking for.
Thanks,
Nick

Hello Pramod,
I would need a more detailed suggestion to implement, but thanks for starting the discussion.
I thought it would be as easy as this
1. Create an event in BW
2. Have a process chain that starts when that event is raised.
Having implemented and successfully tested steps 1 and 2, the rest should be simple (I was able to raise the event on BW locally and the chain did run as expected)
3. On R3, create a small ABAP program that calls the BP_EVENT_RAISED Function Module on R3.
4. Pass that Function Module the following parameters
A. My BW system name, and
B. The event name that I created on my BW system
5. Add that ABAP program to the end of the job on R3.
It doesn't work though! The event i created on BW, doesn't seem to exist from R3's perspective. I was hoping it was as easy as that. Hopefully I am missing something simple, but so far R3 does not want to cause the event on BW to be raised.
Thanks,
Nick
Edited by: Nick Bertz on Oct 13, 2008 12:19 PM
Edited by: Nick Bertz on Oct 13, 2008 12:23 PM

Process chain to run every other Thursday (with exception of 53rd week)

Hello Friends,
I am trying to find a way to set up my Process chain to run every other Thursday (with exception of 53rd week).
I am hoping that I can perform this via Decision variant.
Any advice would be very much helpful.
Regards,
Vinoth V

Hello Shankar,
Thank You for the valuable comment. So you mean I would need to create a decision variant as shown below?
DATE_WEEKDAY1( Current Date ) = 4 for running this every Thursday and DATE_TO_WEEK formula to meet the requirement of restricting the chain not to run on 53rd week?
How can I make the chain to run on alternate Thursdays?
Kindly advice.
Regards,
Vinoth V

Infopackage in process chain taking long time to run

HI Experts,
One of the element (Infopackage) in process chain(Daily process chain) is taking much longer time(6 hr and still runing) as generally it takes 15-20 mins to complete and the status is in yellow and still running in process monitor without giving any clear picture of error. Manually we are making the staus red and we are updating from PSA and this time it is getting completed in time as specified.
Flow from PSA to datatarget(DSO) in series
For last one week we are facing same issue and i would like to mention that we don't have access to SM37,SM12 to look the logs
and any locks.
without this i need to investigate what is the root cause for the same.
with regards,
murali

Hi,
please find the job log.
Date
Time
Message
MsgID/No./Ty
13.12.2010
21:45:30
Job started
00
516
S
13.12.2010
21:45:30
Step 001 started (program SBIE0001, variant &0000000109368, user ID RFCUSER)
00
550
S
13.12.2010
21:45:30
Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
R3
413
S
13.12.2010
21:45:30
DATASOURCE = 2LIS_17_I3HDR
R3
299
S
13.12.2010
21:45:30
RLOGSYS    = PBACLNT200
R3
299
S
13.12.2010
21:45:30
REQUNR     = REQU_D9GSSV08BTS93Z6Y7XWP1ZEUJ
R3
299
S
13.12.2010
21:45:30
UPDMODE    = D
R3
299
S
13.12.2010
21:45:30
LANGUAGES = *
R3
299
S
13.12.2010
21:45:30
R8
048
S
13.12.2010
21:45:30
         Current Values for Selected Profile Parameters               *
R8
049
S
13.12.2010
21:45:30
R8
048
S
13.12.2010
21:45:30
abap/heap_area_nondia......... 0                                       *
R8
050
S
13.12.2010
21:45:30
abap/heap_area_total.......... 25500319744                             *
R8
050
S
13.12.2010
21:45:30
abap/heaplimit................ 40000000                                *
R8
050
S
13.12.2010
21:45:30
zcsa/installed_languages...... ED                                      *
R8
050
S
13.12.2010
21:45:30
zcsa/system_language.......... E                                       *
R8
050
S
13.12.2010
21:45:30
ztta/max_memreq_MB............ 2047                                    *
R8
050
S
13.12.2010
21:45:30
ztta/roll_area................ 3000320                                 *
R8
050
S
13.12.2010
21:45:30
ztta/roll_extension........... 2000000000                              *
R8
050
S
13.12.2010
21:45:30
R8
048
S
13.12.2010
21:45:31
70 LUWs confirmed and 70 LUWs to be deleted with function module RSC2_QOUT_CONFIRM_DATA
RSQU
036
S
13.12.2010
21:45:33
Call customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 9,895 records
R3
407
S
13.12.2010
21:45:33
Result of customer enhancement: 9,895 records
R3
408
S
13.12.2010
21:45:33
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 9,895 records
R3
407
S
13.12.2010
21:45:33
Result of customer enhancement: 9,895 records
R3
408
S
13.12.2010
21:45:33
PSA=0 USING & STARTING SAPI SCHEDULER
R3
299
S
13.12.2010
21:45:33
Asynchronous send of data package 1 in task 0002 (1 parallel tasks)
R3
409
S
13.12.2010
21:45:34
IDOC: Info IDoc 2, IDoc No. 5136702, Duration 00:00:00
R3
088
S
13.12.2010
21:45:34
IDoc: Start = 13.12.2010 21:45:30, End = 13.12.2010 21:45:30
R3
089
S
13.12.2010
21:45:35
Asynchronous transmission of info IDoc 3 in task 0003 (1 parallel tasks)
R3
413
S
13.12.2010
21:45:35
Altogether, 0 records were filtered out through selection conditions
RSQU
037
S
13.12.2010
21:45:35
IDOC: Info IDoc 3, IDoc No. 5136703, Duration 00:00:00
R3
088
S
13.12.2010
21:45:35
IDoc: Start = 13.12.2010 21:45:35, End = 13.12.2010 21:45:35
R3
089
S
13.12.2010
21:55:37
tRFC: Data Package = 1, TID = 0AF0842B00C84D0694000F00, Duration = 00:10:03, ARFCSTATE = SYSFAIL
R3
038
S
13.12.2010
21:55:37
tRFC: Start = 13.12.2010 21:45:34, End = 13.12.2010 21:55:37
R3
039
S
13.12.2010
21:55:37
Synchronized transmission of info IDoc 4 (0 parallel tasks)
R3
414
S
13.12.2010
21:55:37
IDOC: Info IDoc 4, IDoc No. 5136717, Duration 00:00:00
R3
088
S
13.12.2010
21:55:37
IDoc: Start = 13.12.2010 21:55:37, End = 13.12.2010 21:55:37
R3
089
S
13.12.2010
21:55:37
Job finished
00
517
S

Process chain fails every time at "roll up of aggregates"

hi all,
A process is deffined in such a way that...                                        start
                                                                                i
                                                                                i
                                                        Delta loads to infocube1(load) deltaload to infocube2(load)       deltaload to infocube3(load)
                                                                        i                                                 i                                          i
                                                                        i                                                 i                                          i
                                                        delta load of aggregate(cube1)   delta load of aggregates(cube2)     delta load of aggregates
Every time when this process chain get executed,this fails at delta laod of aggregates step.If i repeat again it works fine.But repeating is not a solution for this.So,i want a permanent soltuion for this..
Please guide me what to do?and explain me why this happens.
Error message:-process rollup of filled aggregates/bia indexes,variant delta load of aggregates
Thanks( in advance)
Moushmi

Hi Moushmi,
Have you checked if the system has processes available while the chain is running? It could be that your system is overloaded and the aggregates wouldn't roll up because you have no processes or available memory.
Check with your Basis resource. Also, try changing your chain to do only 1 at a time. Do you have many aggregates to load, are they big, and most important are they being used.
Kathleen

Process Chain for Real Time Demon

Please help I am stuck I followed the step by sdn but this is missing in step. how to create now process chain.
I created the below
DSO CONNECTED TO dATASOURCE via Trans,
Real Time IP
Real Time DTP
assigned to Datasource and assigned the DS, IP, DTP to Deamon in RSRDA. NOW I started also manually via start all IP. but How to set the process chains now.
PLEASE HELP ME STEP BY STEP TO PROCESS CHAIN SINCE i am new to this daemon in process chains
Thanks
Soniya
null

Hi
refer to this
CREATION OF PROCESS CHAINS
Process chains are used to automated the loading process.
Will be used in all applications as you cannot schedule hundreds of infopackages manually and daily.
Metachain
Steps for Metachain :
1. Start ( In this variant set ur schedule times for this metachain )
2.Local Process Chain 1 ( Say its a master data process chain - Get into the start variant of this chain ( Sub chain - like any other chain ) and check the second radio button " Start using metachain or API " )
3.Local Process Chain 2 ( Say its a transaction data process chain do the same as in step 2 )
Steps for Process Chains in BI 7.0 for a Cube.
1. Start
2. Execute Infopackage
3. Delete Indexes for Cube
4.Execute DTP
5. Create Indexes for Cube
For DSO
1. Start
2. Execute Infopackage
3. Execute DTP
5. Activate DSO
For an IO
1. Start
2.Execute infopackage
3.Execute DTP
4.Attribute Change Run
Data to Cube thru a DSO
1. Start
2. Execute Infopackage ( loads till psa )
3.Execute DTP ( to load DSO frm PSA )
4.Activate DSO
5.Further Processing
6.Delete Indexes for Cube
7.Execute DTP ( to load Cube frm DSO )
8.Create Indexes for Cube
3.X
Master loading ( Attr, Text, Hierarchies )
Steps :
1.Start
2. Execute Infopackage ( say if you are loading 2 IO's just have them all parallel )
3.You might want to load in seq - Attributes - Texts - Hierarchies
4.And ( Connecting all Infopackages )
5.Attribute Change Run ( add all relevant IO's ).
Start
Infopackge1A(Attr)|Infopackge2A(Attr)
Infopackge1B(Txts)|Infopackge2B(Txts)
/_____________________|
Infopackge1C(Txts)______|
\_____________________|
\___________________|
__\___________________|
___\__________________|
______ And Processer_ ( Connect Infopackge1C & Infopackge2B )
__________|__________
Attribute Change Run ( Add Infobject 1 & Infoobject 2 to this variant )
1. Start
2. Delete Indexes for Cube
3. Execute Infopackage
4.Create Indexes for Cube
For DSO
1. Start
2. Execute Infopackage
3. Activate DSO
For an IO
1.Start
2.Execute infopackage
3.Attribute Change Run
Data to Cube thru a DSO
1. Start
2. Execute Infopackage
3.Activate DSO
5.Further Processing
6.Delete Indexes for Cube
7.Execute Infopackage
8.Create Indexes for Cube

DSO activation in Process Chains - takes long time

Dear All,
We have included DSO activation in Process Chains. This process takes a long time to execute. We manually cancel the corresponding process in Process Overview and repeat it from chain. The chain runs daily and this issue also occurs on a daily basis.
Does anyone one of you have an idea of how to deal with this performance issue?
Regards.

Figure out in which class does your process fall in:
Class A- High Priority
Class B- Medium Priority
Class C- Least Priority
Background processes
Class A jobs
The number of work processes reserved for job class A is a subset of the number of background processes.
You should only reserve work processes for job class A if it makes sense within your system organization. Work processes reserved for class A jobs are no longer available for job classes B or C.
Set parallel processing for a specific BW process in the (variant) maintenance of the process
Call the function for setting the parallel processes.
You can call the function in the process variant maintenance of a process chain or in the process maintenance. The function call varies for the different BW processes.
For example, in the data transfer process you call the function with Goto--> Background Manager Settings.
The Settings for Parallel Processing dialog box appears
Under Number of Processes, define the maximum number of work processes that should be used to process the BW process.
If you enter 1, the BW process is processed serially.
If you enter a number greater than 1, the BW process is processed in parallel
In the Parallel Processing group frame, make the relevant settings for parallel processing in the background:
Enter a job class for defining the job priority.
The job priority defines how the jobs are distributed among the available background work processes
In the group frame Parallel Processing, you can define whether parallel processing should take place in dialog work processes or in background work processes for the processes ODSACTIVAT, ODSSID and ODSREQUDEL for the DataStore object
Transport:
The entries in tables RSBATCHPARALLEL and RSBATCHSERVER are written on a transport request of the Change and Transport System.
Edited by: ram.pch on Oct 7, 2011 9:55 PM

Process Chain excessive run time

Similar Messages

Maybe you are looking for