Process chain for loading master data attributes

Dear Experts,
Can any one explain the steps needed to load master data into info object through process chain.
Thanks in advance
Santhosh
Please search the forum
Edited by: Pravender on Jun 8, 2010 3:06 PM

in bi7 this would be:
start
infopackage
dtp
attribute change run
M.

Similar Messages

  • Delta and Full process chain for same master data target.

    Hi  Friends,
    Can I do full update and delta update through process chain for same master data target and from same source ?
    Regards
    shekar reddy

    Hi Sriram,
    why you want to load full and delta for same master data object?
    you can achieve this but make sure that you select repair full option for full load IP.
    you have this option in scheduler in menu bar
    Regards,
    Venkatesh

  • DTP error: Lock NOT set for: Loading master data attributes

    Hi,
    I have a custom datasource from ECC which loads into 0CUST_SALES.  I'm using DTP & transformation which has worked for loading data in the past for this infoobject.  The infopackage loads with a green status but when i try to load data, the DTP fails with an error message at "Updating attributes for InfoObject 0CUST_SALES Processing Terminated" & the job log says: "Lock NOT set for: Loading master data attributes".  I've tried reactivating everything but it didn't help. Does anyone know what this error means? We're on SP7.   Thanks in advance!

    Hello Catherine
    I have had this problem in the past (3.0B) --> the reason is that our system was too slow and could not crunch the data fast enough, therefore packets where loacking each other.
    The fix: load the data into the PSA only, and then send it in background from the PSA to the info object. By doing this, only a background process will run, therefore locks cannot happen.
    Fix#2: by a faster server (by faster, I mean more CPU power)
    Now, maybe you have another issue with NW2004s, this was only my 2 cents quick thought
    Good luck!
    Ioan

  • Error when scheduling the infopackage for loading Master data attributes

    Hi,
    Iam getting the following error message when scheduling this Master data Attributes ZIP_0PLANT_ATTR_FULL..( Flexible update of Master data info objects)..
    In Data load monitor error i got this following error message.
    Error message when processing in the Business Warehouse
    Diagnosis
    An error occurred in the SAP BW when processing the data. The error is documented in an error message.
    System response
    A caller 01, 02 or equal to or greater than 20 contains an error meesage.
    Further analysis:
    The error message(s) was (were) sent by:
    Update rules
    Thanks

    HI,
    A caller 01, 02 or equal to or greater than 20 contains an error meesage This is an Idoc error. Please check the Idocs :
    1) SM37 job log (In source system if load is from R/3 or in BW if its a datamart load) (give request name) and it should give you the details about the request. If its active make sure that the job log is getting updated at frequent intervals.
    Also see if there is any 'sysfail' for any datapacket in SM37.
    2) SM66 get the job details (server name PID etc from SM37) and see in SM66 if the job is running or not. (In source system if load is from R/3 or in BW if its a datamart load). See if its accessing/updating some tables or is not doing anything at all.
    3) RSMO see what is available in details tab. It may be in update rules.
    4) ST22 check if any short dump has occured.(In source system if load is from R/3 or in BW if its a datamart load)
    5) Check in SM58 and BD87 for pending tRFCs and IDOCS.
    Once you identify you can rectify the error.
    If all the records are in PSA you can pull it from the PSA to target. Else you may have to pull it again from source infoprovider.
    If its running and if you are able to see it active in SM66 you can wait for some time to let it finish. You can also try SM50 / SM51 to see what is happening in the system level like reading/inserting tables etc.
    If you feel its active and running you can verify by checking if the number of records has increased in the data tables.
    SM21 - System log can also be helpful.
    Thanks,....
    Shambhu

  • Failure of Process Chain while loading master data.

    Hi Guys
    We are using BI 7.0, we have a chain which loads the data to several master data objects having a Write Optimized DSO in between those.
    The steps of the chain is like this when new/delta loads are started loadin first it deletes the all existing WO DSO requestes. starting it was running nice but, now it showing error as follow
    "Process Complete Deletion of Data Target Contents, variant Delete Contents of WriteOptimized Text DSO has status Ended with errors (instance DELC_D2YPRHNFKWTJ27DGHR825IG9V)"
    for your details pls. look below description what job loag shows.
    24.03.2008 23:31:52 Job started
    24.03.2008 23:31:52 Step 001 started (program RSPROCESS, variant &0000000025223, user ID ALEREMOTE)
    24.03.2008 23:31:54 SQL: 24.03.2008 23:31:54 ALEREMOTE
    24.03.2008 23:31:54 TRUNCATE TABLE "/BIC/AZCAGSO0100"
    24.03.2008 23:31:57 SQL-END: 24.03.2008 23:31:57 00:00:03
    24.03.2008 23:31:58 Status transition 8 / 8 to 9 / 9 completed successfully
    24.03.2008 23:31:59 Request DTPR_D2YHDA9WBJZHMZR3RNDP84G27 deleted from PSA; RSREQICODS entry also deleted
    24.03.2008 23:31:59 Request DTPR_D2YHDA9WBJZHMZR3RNDP84G27 not found in IC ZCAGSO01; RSREQICODS also deleted
    24.03.2008 23:31:59 Request DTPR_D2YHDA9WBJZHMZR3RNDP84G27 deleted from PSA; RSREQICODS entry also deleted
    24.03.2008 23:31:59 Overall status 'Deleted' (user ALEREMOTE)
    24.03.2008 23:31:59 Status transition 8 / 8 to 9 / 9 completed successfully
    24.03.2008 23:31:59 Request DTPR_D2YHASHF1RGT3PS7K15O1EC7J deleted from PSA; RSREQICODS entry also deleted
    24.03.2008 23:32:00 Request DTPR_D2YHASHF1RGT3PS7K15O1EC7J not found in IC ZCAGSO01; RSREQICODS also deleted
    24.03.2008 23:32:00 Request DTPR_D2YHASHF1RGT3PS7K15O1EC7J deleted from PSA; RSREQICODS entry also deleted
    24.03.2008 23:32:00 Overall status 'Deleted' (user ALEREMOTE)
    24.03.2008 23:32:00 Status transition 8 / 8 to 9 / 9 completed successfully
    24.03.2008 23:32:00 Request DTPR_D2YHAST7Z9OI47JWNE6XYISEN deleted from PSA; RSREQICODS entry also deleted
    24.03.2008 23:32:00 Request DTPR_D2YHAST7Z9OI47JWNE6XYISEN not found in IC ZCAGSO01; RSREQICODS also deleted
    24.03.2008 23:32:00 Request DTPR_D2YHAST7Z9OI47JWNE6XYISEN deleted from PSA; RSREQICODS entry also deleted
    24.03.2008 23:32:00 Overall status 'Deleted' (user ALEREMOTE)
    24.03.2008 23:32:01 Status transition 8 / 8 to 9 / 9 completed successfully
    24.03.2008 23:32:01 Request DTPR_D2YHASHF1QTQL3ZFXU5A0KG27 deleted from PSA; RSREQICODS entry also deleted
    24.03.2008 23:32:01 Request DTPR_D2YHASHF1QTQL3ZFXU5A0KG27 not found in IC ZCAGSO01; RSREQICODS also deleted
    24.03.2008 23:32:01 Request DTPR_D2YHASHF1QTQL3ZFXU5A0KG27 deleted from PSA; RSREQICODS entry also deleted
    24.03.2008 23:32:01 Overall status 'Deleted' (user ALEREMOTE)
    24.03.2008 23:32:01 Status transition 8 / 8 to 9 / 9 completed successfully
    24.03.2008 23:32:02 Request DTPR_D2YHANE9BAUMXVEZORZKK4W6B deleted from PSA; RSREQICODS entry also deleted
    24.03.2008 23:32:02 Request DTPR_D2YHANE9BAUMXVEZORZKK4W6B not found in IC ZCAGSO01; RSREQICODS also deleted
    24.03.2008 23:32:02 Request DTPR_D2YHANE9BAUMXVEZORZKK4W6B deleted from PSA; RSREQICODS entry also deleted
    24.03.2008 23:32:02 Overall status 'Deleted' (user ALEREMOTE)
    24.03.2008 23:32:02 Status transition 8 / 8 to 9 / 9 completed successfully
    24.03.2008 23:32:02 Request DTPR_D2YHALZE6E7KDH4I6DFWJBHER deleted from PSA; RSREQICODS entry also deleted
    24.03.2008 23:32:02 Request DTPR_D2YHALZE6E7KDH4I6DFWJBHER not found in IC ZCAGSO01; RSREQICODS also deleted
    24.03.2008 23:32:03 Request DTPR_D2YHALZE6E7KDH4I6DFWJBHER deleted from PSA; RSREQICODS entry also deleted
    24.03.2008 23:32:03 Overall status 'Deleted' (user ALEREMOTE)
    24.03.2008 23:32:03 Status transition 8 / 8 to 9 / 9 completed successfully
    24.03.2008 23:32:03 Request DTPR_D2YHAKPLWART6KV46SP2B02JN deleted from PSA; RSREQICODS entry also deleted
    24.03.2008 23:32:03 Request DTPR_D2YHAKPLWART6KV46SP2B02JN not found in IC ZCAGSO01; RSREQICODS also deleted
    24.03.2008 23:32:03 Request DTPR_D2YHAKPLWART6KV46SP2B02JN deleted from PSA; RSREQICODS entry also deleted
    24.03.2008 23:32:03 Overall status 'Deleted' (user ALEREMOTE)
    24.03.2008 23:32:04 Status transition 8 / 8 to 9 / 9 completed successfully
    24.03.2008 23:32:04 Request DTPR_D2YHAKMW13R2CKHMT25HKESIR deleted from PSA; RSREQICODS entry also deleted
    24.03.2008 23:32:04 Request DTPR_D2YHAKMW13R2CKHMT25HKESIR not found in IC ZCAGSO01; RSREQICODS also deleted
    24.03.2008 23:32:04 Request DTPR_D2YHAKMW13R2CKHMT25HKESIR deleted from PSA; RSREQICODS entry also deleted
    24.03.2008 23:32:04 Overall status 'Deleted' (user ALEREMOTE)
    24.03.2008 23:32:04 Status transition 8 / 8 to 9 / 9 completed successfully
    24.03.2008 23:32:04 Request DTPR_D2YHAJ9TA32EPY74YY9P8ATIB deleted from PSA; RSREQICODS entry also deleted
    24.03.2008 23:32:04 Request DTPR_D2YHAJ9TA32EPY74YY9P8ATIB not found in IC ZCAGSO01; RSREQICODS also deleted
    24.03.2008 23:32:05 Request DTPR_D2YHAJ9TA32EPY74YY9P8ATIB deleted from PSA; RSREQICODS entry also deleted
    24.03.2008 23:32:05 Overall status 'Deleted' (user ALEREMOTE)
    24.03.2008 23:32:05 Status transition 8 / 8 to 9 / 9 completed successfully
    24.03.2008 23:32:05 Request DTPR_D2YHAJ9IZ7XK8H1KF0JEH9S6B deleted from PSA; RSREQICODS entry also deleted
    24.03.2008 23:32:05 Request DTPR_D2YHAJ9IZ7XK8H1KF0JEH9S6B not found in IC ZCAGSO01; RSREQICODS also deleted
    24.03.2008 23:32:05 Request DTPR_D2YHAJ9IZ7XK8H1KF0JEH9S6B deleted from PSA; RSREQICODS entry also deleted
    24.03.2008 23:32:05 Overall status 'Deleted' (user ALEREMOTE)
    24.03.2008 23:32:06 Status transition 8 / 8 to 9 / 9 completed successfully
    Hope i can get solutions...
    Points are assigned for right ones..
    thanks inadvance
    peter

    Hi Chetan, thanx for your reply. pls. find the exact error below.
    1. Error while deleting content of InfoCube/DataStore object
        ZDRTSO01
    2. Drop Cube Failed In Data Target ZDRTSO01
    I am not using ECC, its BI to BI load.
    Thanks in advance..
    Peter

  • Lock NOT set for: Loading master data attributes error

    Hi experts,
    We were encountering this error before when trying to load master data.  When we checked the system we could not find any locks at the time, and activation or kicking off the attribute change run failed again.  We finally solved the problem running FM RSDDS_AGGR_MOD_CLOSE which sets the close flag to 'X' in table RSDDAGGRMODSTATE.  I have read that it is possible this lock error happens when two change runs happen at the same time.
    My question are:
    1. is it possible to find out what process exactly "caused" the lock? the table RSDDAGGRMODSTATE does not have a reference to any object or job. I am curious as we are trying to find ways to avoid this in the future...
    2. in our case, when we could not find any locks, is running this fm the only work around? is this a best practice?
    mark
    Message was edited by:
            Mark Siongco
    Message was edited by:
            Mark Siongco

    Hello Catherine
    I have had this problem in the past (3.0B) --> the reason is that our system was too slow and could not crunch the data fast enough, therefore packets where loacking each other.
    The fix: load the data into the PSA only, and then send it in background from the PSA to the info object. By doing this, only a background process will run, therefore locks cannot happen.
    Fix#2: by a faster server (by faster, I mean more CPU power)
    Now, maybe you have another issue with NW2004s, this was only my 2 cents quick thought
    Good luck!
    Ioan

  • Error in Process Chain while loading Master data text?

    Hello All
    Having a Process chain and having 5 infopackages(Master data Attri & text)with FULL LOAD with an processing options as PSA and Infobject.In this one of the infopackage failed and the status is in red colour,and when I right clicked there is no <b>repeat</b> option?Now <b>how to run this process</b>?
    Heard that v can restart the process in debug screen?can anyone let me know how to do this?
    Many Thanks
    balaji

    Hi dear,
    you don't find the repeat option because this is a full load...I think you can easily restart the entire PC (or loading directly the failed infopackage from RSA1), because full loads for master data don't cause any data duplication !
    Hope it helps!
    Bye,
    Roberto

  • Lock NOT set for: Loading master data attributes

    Error when running Process chain on a load pls can you advise?
    Thanks

    Hi,
    Probably some other job is running for the same tables,or activation change run is happening.
    Check your monitor to see what other jobs are running or check in SM37. Wait till those jobs finish and then try again.
    You can also use tcode SM12 to delete any lock entries as well.
    Cheers,
    Kedar

  • Where to set lock while loading master data attributes

    Hello Experts,
    I have two different datasources from ECC which loads into 0CUST_SALES attributes. I'm using two different DTP & transformation which are loading data in the this infoobject attributes.
    When i try to load data, the DTP fails with an error message at "Updating attributes for InfoObject 0CUST_SALES Processing Terminated" & the job log says: "Lock NOT set for: Loading master data attributes".
    Here what exactly  LOCK means?
    Thanks in advance.
    Zakir Khan.

    Hi,
    The lock means that some program is updating the master data (a table) and at the same time other program can not update that same master data. When the first program completes the updation it will release the lock so that the other program can update this.
    In your case you and schedule the DTP one after another.
    Thanks

  • Process chains for loading data to target is not functioning

    Hi SAPians,
    Recently, we have upgraded the firmware on IBM P590 with the help of IBM on Saturday i.e. 06/12/2008 (The firmware of P5-590 was SF235_209. It was upgraded to SF240_XXX) and since then the process chains for loading data to targets are not functioning properly.  We have stopped all the SAP services, database services & OS services from our end and services have been rebooted after firmware upgrade.
    However, the problem with the process chains that load transaction data and hierarchies is solved but the chains that load master data are still not working as scheduled.
    We tried to load the master data manually, by running DTP to load data to an object analysis code (attributes) the request remained YELLOW. After refreshing it several times, the request turned into RED. The error message was - PROCESSING TERMINATED (screenshot 1 attached).
    To mitigate this we tried deleting the bad request and it prompted with the below message:
    "Cannot lock request DTPR_4C37TCZGDUDX1PXL38LVD9CLJ of table ZANLYSIS for deletion (Message no. RSMPC178)" (screenshot 2 attached)
    Please advise us how the bad request should be deleted?
    Regards,
    Soujanya

    Hi Sowjanya,
    Follow the below procedure to make yellow request to RED:
    Use SE37, to execute the function module RSBM_GUI_CHANGE_USTATE
    From the next screen, for I_REQUID enter that request ID and execute.
    From the next screen, select 'Status Erroneous' radiobutton and continue.
    This Function Module, change the status of request from Green / Yellow to RED.
    Once it is RED, you can manually delete that request...
    Releasing LocK
    Gott Transaction Code SM12 and release the lock.
    Hope It helps you.
    Regardss,
    Nagaraju.V

  • Loading master data attributes

    Hi.
    When I am loading master data attributes, DTP process takes long time (approximately 30 minute) .
    Although records count is just 193.
    What may be a reason of this?
    Information about system:
    Software component   Release    Level
    SAP_ABA                      700          0023  
    SAP_BASIS                   700          0023  
    SAP_BW                        700          0025

    Hi...
    Check the Package size in the DTP......try to increase or decrease it.....if it makes any differerence......
    Secondly....in the DTP in the tab "Update" select the option " Valid records update, No reporting"....then the "Semantic Groups" in the tab " Extraction" will work.....it will improve the performance....
    Regards,
    Debjani........

  • What are the steps for loading master data

    Hello
    what are the steps for loading master data? i want to learn about loading all master data and the steps to choose the best way to load the data.
    if anyone has documents please send me the documents i will be really greatful
    [email protected] thanks everyone
    Evion

    Hi Heng,
    Download the data into a CSV file.
    Write a program using GUI_UPLOAD to upload the CSV file and insert records.Chk the below link for example
    http://www.sap-img.com/abap/vendor-master-upload-program.htm
    Reward Points for the useful solutions.
    Regards,
    Harini.S

  • Error while loading master data attribute

    Hi Guru's
    I am getting below mention error while loading master  data attribute.
    0MANU_MATNR : Data record 1035 ('000000000000229058 '): Version 'BDM755s ' is not valid
    Please sugggest how to resolve ?
    Regards
    Karan

    Hi,
    I think there is problem with "0MANU_MATNR" Data, check the records 1033 to 1036 and find the differnce between 1035 record and other records, some values is giving problem so by looking at other reocrds i.e 1033,1034,1036. Check in PSA in Monitor. 
    Note: If any problem with Upper/Lowe case then use TOUPPER in Transfer Rules
    If need use Conversion exits in transfer rules.
    ALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
      EXPORTING
        INPUT         = 0MANU_MATNR
    IMPORTING
       OUTPUT        =   Result .
    or
    ALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
      EXPORTING
        INPUT         = 0MANU_MATNR
    IMPORTING
       OUTPUT        =   Result .
    Thanks
    Reddy
    Edited by: Surendra Reddy on Mar 3, 2009 11:46 AM

  • Best Practices for Loading Master Data via a Process Chain

    Currently, we load attributes, text, and hierarchies before loading the transactional data.  We have one meta chain.  To load the master data it is taking more than 2 hours.  Most of the master data is full loads.  We've noticed that a lot of the master data, especially text, has not changed or changed very little since we implemented 18 months ago.  Is there a precedence or best practice to follow such as do we remove these processes from the chain?  If so, how often should it be run?  We would really like to reduce the amount of the master data loading time.  Is there any documentation that I can refer to?  What are other organizations doing to reduce the amount of time to load master data?
    Thanks!
    Debby

    Hi Debby,
    I assume you're loading Master Data from a BI system? The forum here are related to SAP NetWeaver MDM, so maybe you should ask this question in a BI forum?
    Nevertheless, if your data isn't changed this much, maybe you could use a delta mechanism for extraction? This would send only the changed records and not all the unchanged all the time. But this depends on your master data and of course on your extractors.
    Cheers
    Michael

  • Process chain Upload of Master Data

    I have to create process chains to load the Master data and text.
    lets say i have Cost Center master data to be loaded through process chain.
    And this CC has 3 Attributes like Org ,Profit Center..
    So have i got to do the process chain in sucha  way that
    I have to load the Org, Profit Center master data and its text first and then set the process chain to load the Cost Center if the above are successful ???
    Thanks a lot,
    GG

    GG,
    The loading of master data (attributes) for Org, PC and any other attributes is recommended before loading the cost center data, but not required.
    The only thing that could happen is the system has to do extra work in creating master data entries that don't yet exist, on smaller master data loads like cost center, it won't make much of a difference, but master data like 0MAT_PLANT, and not loading 0MATERIAL prior, could take longer.
    Texts can be loaded at any time, texts don't slow down system performance and are not required for master data creation.
    Hope this helps!
    Cheers!
    /smw

Maybe you are looking for