Process chains get an error when run analysis process

When my PRD system‘s process chains run analysisi process, I  gets below error message:
Error occurred when starting the parser: Error when opening an RFC connection (FUNCTION: 'R
Message no. BRAINOLAPAPI011
Diagnosis
Failed to start the MDX parser.
System Response
Error when opening an RFC connection (FUNCTION: 'R
Procedure
Check the Sys Log in Transaction SM21 and test the TCP-IP connection MDX_PARSER in Transaction SM59.
It's OK when i test the TCP-IP connection MDX_PARSER in Transaction SM59.
The Sys Log in Transaction SM21(error part):
M Wed Mar 19 09:22:50 2014
M  *** ERROR => ThPOpen: ExecPopen("/usr/sap/BWP/DVEBMGS00/exe/tp" bwprd sapgw00 18933904 IDX=35, r, ..) returned -14 [thxxexec.c
M  {root-id=532810645F5D12A0E1008000C0A8642F}_{conn-id=5328109B5F5D12A0E1008000C0A8642F}_5
A  RFC 1878  CONVID 18933904
A   * CMRC=0 DATA=0 STATUS=0 SAPRC=0 RfcExecProgramKernel RfcRaiseErrorMessage cmd could not be started by OS (rc = 1)
A  RFC> ABAP Programm: SAPLSTPA (Transaction: )
A  RFC> User: JY-LKZ (Client: 900)
A  RFC> Destination: CALLTP_AIX (handle: 8, DtConId: 530F4E5C30AF4550E1008000C0A8642E, DtConCnt: 0, ConvId: ,)
A  RFC SERVER> RFC Server Session (handle: 1, 68443927, {5328109B-5F5D-12A0-E100-8000C0A8642F})
A  RFC SERVER> Caller host:
A  RFC SERVER> Caller transaction code: STMS (Caller Program: SAPLTMSC)
A  RFC SERVER> Called function module: TMS_CI_START_SERVICE
A  *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1887
FUNCTION: 'RfcExecProgramKernel'
RfcRaiseErrorMessage cmd could not be started by OS (rc = 1)
PROG ="/usr/sap/BWP/DVEBMGS00/exe/tp" bwprd sapgw00 18933904 IDX=35
[abrfcio.c    9213]
A  {root-id=532810645F5D12A0E1008000C0A8642F}_{conn-id=5328109B5F5D12A0E1008000C0A8642F}_5
A  TH VERBOSE LEVEL FULL
A  ** RABAX: end RX_GET_MESSAGE
M
M Wed Mar 19 09:23:15 2014
M  *** ERROR => ThPOpen: ExecPopen("/usr/sap/BWP/DVEBMGS00/exe/tp" bwprd sapgw00 18968493 IDX=61, r, ..) returned -14 [thxxexec.c
M  {root-id=532810645F5D12A0E1008000C0A8642F}_{conn-id=532811958F750F10E1008000C0A8642F}_1
A  RFC 1878  CONVID 18968493
A   * CMRC=0 DATA=0 STATUS=0 SAPRC=0 RfcExecProgramKernel RfcRaiseErrorMessage cmd could not be started by OS (rc = 1)
A  RFC> ABAP Programm: SAPLSTPA (Transaction: )
A  RFC> User: TMSADM (Client: 000)
A  RFC> Destination: CALLTP_AIX (handle: 3, DtConId: 530F4E7830AF4550E1008000C0A8642E, DtConCnt: 0, ConvId: ,)
A  RFC SERVER> RFC Server Session (handle: 1, 70212851, {53281195-8F75-0F10-E100-8000C0A8642F})
A  RFC SERVER> Caller host:
A  RFC SERVER> Caller transaction code: STMS (Caller Program: SAPLTMSC)
A  RFC SERVER> Called function module: TMS_CI_START_SERVICE
A  *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1887
FUNCTION: 'RfcExecProgramKernel'
RfcRaiseErrorMessage cmd could not be started by OS (rc = 1)
PROG ="/usr/sap/BWP/DVEBMGS00/exe/tp" bwprd sapgw00 18968493 IDX=61
[abrfcio.c    9213]
A  {root-id=532810645F5D12A0E1008000C0A8642F}_{conn-id=532811958F750F10E1008000C0A8642F}_1
A  TH VERBOSE LEVEL FULL
A  ** RABAX: end RX_GET_MESSAGE.
ps.
1、IT's everything ok in the development system.
2、It’s ok when i repeat this analysis process .
3、It’s ok when i run this analysis process in analysis process designer.
4、Attachment is the sys log in sm21.
Thanks everyone.

Hi Vignesh.B,
Yes,it's not user's problem . But i don't  think it APD's problem .Cause all APD has the same problem and .
Below is one of APD souce and target :
Hope this information  is useful .
Regards,
Lian

Similar Messages

  • Getting an Error When Running Server 2012 R2 adprep /forest prep on a 2012 DC

    I am getting an error when running adprep /forest prep on a Server 2012 domain controller. The main parts of my domain are as follows:
    2 - Domain Controllers running Server 2012
    1 - Exchange Server 2013 running on Server 2012
    I am trying to either do an in-place upgrade to my domain controllers to Server 2012 R2 or even introduce a Server 2012 R2 domain controller into the domain. The error I am getting is as follows:
    [Status/Consequence]
    The operation GUID already exists so Adprep did not attempt to rerun this operation but is continuing.
    [2014/04/05:09:12:38.873]
    Adprep was about to call the following LDAP API. ldap_search_s(). The base entry to start the search is cn=38618886-98ee-4e42-8cf1-d9a2cd9edf8b,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=DOMAIN,DC=local.
    [2014/04/05:09:12:38.873]
    LDAP API ldap_search_s() finished, return code is 0x20
    [2014/04/05:09:12:38.873]
    Adprep verified the state of operation cn=38618886-98ee-4e42-8cf1-d9a2cd9edf8b,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=DOMAIN,DC=local.
    [Status/Consequence]
    The operation has not run or is not currently running. It will be run next.
    [2014/04/05:09:12:38.873]
    Adprep was about to call the following LDAP API. ldap_modify_s(). The entry to modify is CN=ad://ext/AuthenticationSilo,CN=Claim Types,CN=Claims Configuration,CN=Services,CN=Configuration,DC=DOMAIN,DC=local.
    [2014/04/05:09:12:38.873]
    LDAP API ldap_modify_s() finished, return code is 0x13
    [2014/04/05:09:12:38.905]
    Adprep was unable to modify some attributes on object CN=ad://ext/AuthenticationSilo,CN=Claim Types,CN=Claims Configuration,CN=Services,CN=Configuration,DC=DOMAIN,DC=local.
    [User Action]
    Check the log file ADPrep.log in the C:\Windows\debug\adprep\logs\20140405091235 directory for more information.
    [2014/04/05:09:12:38.936]
    Adprep encountered an LDAP error.
    Error code: 0x13. Server extended error code: 0x20b1, Server error message: 000020B1: AtrErr: DSID-030F112A, #1:
     0: 000020B1: DSID-030F112A, problem 1005 (CONSTRAINT_ATT_TYPE), data 0, Att 9086f (msDS-ClaimIsValueSpaceRestricted)
    DSID Info:
    DSID: 0x181112dd
    ldap error = 0x13
    NT BUILD: 9600
    NT BUILD: 16384
    [2014/04/05:09:12:38.967]
    Adprep was unable to update forest information.
    [Status/Consequence]
    Adprep requires access to existing forest-wide information from the schema master in order to complete this operation.
    [User Action]
    Check the log file, ADPrep.log, in the C:\Windows\debug\adprep\logs\20140405091235 directory for more information.
    Any Help would be appreciated. Thanks!

    Hi,
    did you check which servers has FSMO roles?
    You can do that via command prompt: netdom query fsmo
    For forestprep you must do that on DC which have Schema Operations marter role.
    Command
    Domain controller
    Number of times to run the command
    adprep /forestprep
    Must be run on the schema operations master for the forest.
    Once for the entire forest
    adprep /domainprep
    Must be run on the infrastructure operations master for the domain.
    Once in each domain where you plan to install an additional domain controller that runs a later version of Windows Server than the latest version that is running in the domain.
    Note
    Domains where you will not add a new domain controller will be affected by adprep /forestprep, but they do not require you to run adprep /domainprep.
    http://technet.microsoft.com/en-us/library/dd464018(v=ws.10).aspx

  • Getting an error when running OPENROWSET on remote SSMS

    Hi!
    I'm getting an error when I execute OPENROWSET command
    from a remote SQL Server Management studio. But has no problem when directly execute the command on our database server.
    Msg 7303, Level 16, State 1, Line 2
    Cannot initialize the data source object of OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "(null)".
    Is there anything I need to enable or configure?
    Thank you in advance for your help!

    OK, this is the information that we need.
    "It is already opened exclusively by another user, or you need permission to view its data."
    Please check those 2 options:
    * "already opened": at time the connection is ot working try to open the file localy with the excal application. If the file is in used then the excel will promp about this. If it is not give you any error localy then
    try again from remoe (since the excel might take control if the connection is opened but not in used by remote connection). If you get that this might be the problem pls repeat this several time to make sure.
    * "you need permission": This is much more common situation 
    >> By default, when you use OpenRowSet to remote server it's the SQL Server Service user that needs access to the file. This is why lot of time it work ocaly and not from remote. check the service's user's permission.
    You can change the SQL server to run as a AD user (with the security implications it has) and then give that user access to the file on the network
    >> You are trying to use a share network folder. check thi link:
    http://technet.microsoft.com/en-us/library/ms175915.aspx
    "To use BULK INSERT or INSERT...SELECT * FROM OPENROWSET(BULK...) to bulk import data from another computer, the data file must be shared between the two computers. To specify a shared data file, use its universal naming convention (UNC) name, which takes
    the general form"
    >> check this link as well:
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/ac615f7e-a4af-44d9-8bba-8e5c20be3c76/using-credentials-with-openrowset?forum=sqlintegrationservices
    >> make sure that you use the right provider. Are you using 64 bit or 32?
    [Personal Site] [Blog] [Facebook]

  • Why am I getting Run-time menu error (Error 88 occurred at One or more illegal menu item index in...) in my built applicatio​n (single .exe) , but don't get any error when running/de​bugging it?

    I am using LabVIEW 6.02 & also downloaded the application builder patch. For my runtime menus, I've a subVI that first calls "Delete Menu Items.vi" to get rid of the standard menu items and then "Insert Menu Items.vi" to add my own. I only get an error when I try to run the built application.

    There was a similar issue in LabVIEW 5.0 where you would get the error if you passed an empty array to the 'items' input of Delete Menu Items. This was corrected in version 5.0.1. Did you mass compile your VI's after upgrading to version 6.0.2?
    I tried to reproduce the problem in a small VI but was not successful. I can run an executable built from this example without any problems. I am attaching it for you to test.
    Chris_Mitchell
    Product Development Engineer
    Certified LabVIEW Architect
    Attachments:
    menu.llb ‏33 KB

  • SET CURRENT DEGREE = 1..error when run the process chain..

    Hi Experts,
    when i run the process chain ,  i got the following error..
    SET CURRENT DEGREE = 1..
    what is this error?
    Kindly help ..

    hi,
    As BW reporting queries are often CPU-intensive and geneally executed in parallel.
    Parallel processing is activated dynamically in the SAP BW system for every reporting query CURRENT DEGREE = ANY and itsdefault value is 1.
      you can limit the maximum number of parallel tasks using ZPARM PARAMDEG(maximum number of parallel tasks ) for the no. of parallel processors for its usuage and this should match no. of processors you can get touch with your basis team
    check SAP Note:390016 -DB2/390: BW: Database settings and performance ; in that look at query parallelism it explain about this
    hope it helps
    regards
    laksh

  • Process.Start - getting different output when running command using this method than I am if I run same command in CMD prompt

    Hi
    Creating an application to analyze .dmp files - all working well except this odd issue
    If I open command prompt and enter this command:-
    kd -z C:\Windows\MiniDump\042414-24632-01.dmp -c "!analyze -v"
    Then it works and shows me all the output I need (shown at bottom of post)
    If I run same command in VB.net using following code - then it doesn't give the same output - the bits I need at the end created by the !analyze -v switch don't appear
    Any ideas why it is not seeing the switch correctly - setting a breakpoint and checking contents of startinfo seems to be showing correct cmd line i.e. "kd -z C:\windows\minidump\042414-24632-01.dmp -c "!analyze –v;q""
    Dim myprocess As New Process()
    myprocess.StartInfo.FileName = "C:\Program Files (x86)\Windows Kits\8.1\Debuggers\x86\kd"
    myprocess.StartInfo.Arguments = "-z C:\windows\minidump\042414-24632-01.dmp -c ""!analyze –v;q"""
    myprocess.StartInfo.UseShellExecute = False
    myprocess.StartInfo.RedirectStandardOutput = True
    myprocess.StartInfo.CreateNoWindow = True
    myprocess.Start()
    TextBox1.AppendText(myprocess.StandardOutput.ReadToEnd())
    Output when run from cmd prompt:-
    C:\Program Files (x86)\Windows Kits\8.1\Debuggers\x86>kd -z C:\Windows\MiniDump\042414-24632-01.dmp -c "!analyze -v;q"
    Microsoft (R) Windows Debugger Version 6.3.9600.17298 X86
    Copyright (c) Microsoft Corporation. All rights reserved.
    Loading Dump File [C:\Windows\MiniDump\042414-24632-01.dmp]
    Mini Kernel Dump File: Only registers and stack trace are available
    Symbol search path is: *** Invalid ***
    * Symbol loading may be unreliable without a symbol search path. *
    * Use .symfix to have the debugger choose a symbol path. *
    * After setting your symbol path, use .reload to refresh symbol locations. *
    Executable search path is:
    * Symbols can not be loaded because symbol path is not initialized. *
    * The Symbol Path can be set by: *
    * using the _NT_SYMBOL_PATH environment variable. *
    * using the -y <symbol_path> argument when starting the debugger. *
    * using .sympath and .sympath+ *
    Unable to load image \SystemRoot\system32\ntkrnlpa.exe, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for ntkrnlpa.exe
    *** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
    Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x86 compatible
    Product: WinNt, suite: TerminalServer SingleUserTS
    Built by: 7601.18205.x86fre.win7sp1_gdr.130708-1532
    Machine Name:
    Kernel base = 0x82e3e000 PsLoadedModuleList = 0x82f874d0
    Debug session time: Thu Apr 24 13:36:18.672 2014 (UTC + 1:00)
    System Uptime: 0 days 0:00:38.703
    * Symbols can not be loaded because symbol path is not initialized. *
    * The Symbol Path can be set by: *
    * using the _NT_SYMBOL_PATH environment variable. *
    * using the -y <symbol_path> argument when starting the debugger. *
    * using .sympath and .sympath+ *
    Unable to load image \SystemRoot\system32\ntkrnlpa.exe, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for ntkrnlpa.exe
    *** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
    Loading Kernel Symbols
    Loading User Symbols
    Loading unloaded module list
    ************* Symbol Loading Error Summary **************
    Module name Error
    ntkrnlpa The system cannot find the file specified
    You can troubleshoot most symbol related issues by turning on symbol loading diagnostics (!sym noisy) and repeating the
    command that caused symbols to be loaded.
    You should also verify that your symbol search path (.sympath) is correct.
    * Bugcheck Analysis *
    Use !analyze -v to get detailed debugging information.
    BugCheck 50, {afa99150, 0, 88c557d7, 0}
    *** WARNING: Unable to verify timestamp for mssmbios.sys
    *** ERROR: Module load completed but symbols could not be loaded for mssmbios.sys
    *** WARNING: Unable to verify timestamp for mfehidk.sys
    *** ERROR: Module load completed but symbols could not be loaded for mfehidk.sys
    *** WARNING: Unable to verify timestamp for HipShieldK.sys
    *** ERROR: Module load completed but symbols could not be loaded for HipShieldK.sys
    ***** Kernel symbols are WRONG. Please fix symbols to do analysis.
    *** Either you specified an unqualified symbol, or your debugger ***
    *** doesn't have full symbol information. Unqualified symbol ***
    *** resolution is turned off by default. Please either specify a ***
    *** fully qualified symbol module!symbolname, or enable resolution ***
    *** of unqualified symbols by typing ".symopt- 100". Note that ***
    *** enabling unqualified symbol resolution with network symbol ***
    *** server shares in the symbol path may cause the debugger to ***
    *** appear to hang for long periods of time when an incorrect ***
    *** symbol name is typed or the network symbol server is down. ***
    *** For some commands to work properly, your symbol path ***
    *** must point to .pdb files that have full type information. ***
    *** Certain .pdb files (such as the public OS symbols) do not ***
    *** contain the required information. Contact the group that ***
    *** provided you with these symbols if you need this command to ***
    *** work. ***
    *** Type referenced: nt!_KPRCB ***
    *** Either you specified an unqualified symbol, or your debugger ***
    *** doesn't have full symbol information. Unqualified symbol ***
    *** resolution is turned off by default. Please either specify a ***
    *** fully qualified symbol module!symbolname, or enable resolution ***
    *** of unqualified symbols by typing ".symopt- 100". Note that ***
    *** enabling unqualified symbol resolution with network symbol ***
    *** server shares in the symbol path may cause the debugger to ***
    *** appear to hang for long periods of time when an incorrect ***
    *** symbol name is typed or the network symbol server is down. ***
    *** For some commands to work properly, your symbol path ***
    *** must point to .pdb files that have full type information. ***
    *** Certain .pdb files (such as the public OS symbols) do not ***
    *** contain the required information. Contact the group that ***
    *** provided you with these symbols if you need this command to ***
    *** work. ***
    *** Type referenced: nt!_KPRCB ***
    *** Either you specified an unqualified symbol, or your debugger ***
    *** doesn't have full symbol information. Unqualified symbol ***
    *** resolution is turned off by default. Please either specify a ***
    *** fully qualified symbol module!symbolname, or enable resolution ***
    *** of unqualified symbols by typing ".symopt- 100". Note that ***
    *** enabling unqualified symbol resolution with network symbol ***
    *** server shares in the symbol path may cause the debugger to ***
    *** appear to hang for long periods of time when an incorrect ***
    *** symbol name is typed or the network symbol server is down. ***
    *** For some commands to work properly, your symbol path ***
    *** must point to .pdb files that have full type information. ***
    *** Certain .pdb files (such as the public OS symbols) do not ***
    *** contain the required information. Contact the group that ***
    *** provided you with these symbols if you need this command to ***
    *** work. ***
    *** Type referenced: nt!_KPRCB ***
    Probably caused by : mfehidk.sys ( mfehidk+377d7 )
    Followup: MachineOwner
    1: kd> kd: Reading initial command '!analyze -v;q'
    * Bugcheck Analysis *
    PAGE_FAULT_IN_NONPAGED_AREA (50)
    Invalid system memory was referenced. This cannot be protected by try-except,
    it must be protected by a Probe. Typically the address is just plain bad or it
    is pointing at freed memory.
    Arguments:
    Arg1: afa99150, memory referenced.
    Arg2: 00000000, value 0 = read operation, 1 = write operation.
    Arg3: 88c557d7, If non-zero, the instruction address which referenced the bad memory
    address.
    Arg4: 00000000, (reserved)
    Debugging Details:
    ***** Kernel symbols are WRONG. Please fix symbols to do analysis.
    *** Either you specified an unqualified symbol, or your debugger ***
    *** doesn't have full symbol information. Unqualified symbol ***
    *** resolution is turned off by default. Please either specify a ***
    *** fully qualified symbol module!symbolname, or enable resolution ***
    *** of unqualified symbols by typing ".symopt- 100". Note that ***
    *** enabling unqualified symbol resolution with network symbol ***
    *** server shares in the symbol path may cause the debugger to ***
    *** appear to hang for long periods of time when an incorrect ***
    *** symbol name is typed or the network symbol server is down. ***
    *** For some commands to work properly, your symbol path ***
    *** must point to .pdb files that have full type information. ***
    *** Certain .pdb files (such as the public OS symbols) do not ***
    *** contain the required information. Contact the group that ***
    *** provided you with these symbols if you need this command to ***
    *** work. ***
    *** Type referenced: nt!_KPRCB ***
    *** Either you specified an unqualified symbol, or your debugger ***
    *** doesn't have full symbol information. Unqualified symbol ***
    *** resolution is turned off by default. Please either specify a ***
    *** fully qualified symbol module!symbolname, or enable resolution ***
    *** of unqualified symbols by typing ".symopt- 100". Note that ***
    *** enabling unqualified symbol resolution with network symbol ***
    *** server shares in the symbol path may cause the debugger to ***
    *** appear to hang for long periods of time when an incorrect ***
    *** symbol name is typed or the network symbol server is down. ***
    *** For some commands to work properly, your symbol path ***
    *** must point to .pdb files that have full type information. ***
    *** Certain .pdb files (such as the public OS symbols) do not ***
    *** contain the required information. Contact the group that ***
    *** provided you with these symbols if you need this command to ***
    *** work. ***
    *** Type referenced: nt!_KPRCB ***
    *** Either you specified an unqualified symbol, or your debugger ***
    *** doesn't have full symbol information. Unqualified symbol ***
    *** resolution is turned off by default. Please either specify a ***
    *** fully qualified symbol module!symbolname, or enable resolution ***
    *** of unqualified symbols by typing ".symopt- 100". Note that ***
    *** enabling unqualified symbol resolution with network symbol ***
    *** server shares in the symbol path may cause the debugger to ***
    *** appear to hang for long periods of time when an incorrect ***
    *** symbol name is typed or the network symbol server is down. ***
    *** For some commands to work properly, your symbol path ***
    *** must point to .pdb files that have full type information. ***
    *** Certain .pdb files (such as the public OS symbols) do not ***
    *** contain the required information. Contact the group that ***
    *** provided you with these symbols if you need this command to ***
    *** work. ***
    *** Type referenced: nt!_KPRCB ***
    ADDITIONAL_DEBUG_TEXT:
    You can run '.symfix; .reload' to try to fix the symbol path and load symbols.
    MODULE_NAME: mfehidk
    FAULTING_MODULE: 82e3e000 nt
    DEBUG_FLR_IMAGE_TIMESTAMP: 4d2e1e3e
    READ_ADDRESS: GetPointerFromAddress: unable to read from 00000000
    GetPointerFromAddress: unable to read from 00000000
    unable to get nt!MmSpecialPoolStart
    unable to get nt!MmSpecialPoolEnd
    unable to get nt!MmPagedPoolEnd
    unable to get nt!MmNonPagedPoolStart
    unable to get nt!MmSizeOfNonPagedPoolInBytes
    afa99150
    FAULTING_IP:
    mfehidk+377d7
    88c557d7 0fb70c06 movzx ecx,word ptr [esi+eax]
    MM_INTERNAL_CODE: 0
    CUSTOMER_CRASH_COUNT: 1
    DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
    BUGCHECK_STR: 0x50
    CURRENT_IRQL: 0
    ANALYSIS_VERSION: 6.3.9600.17298 (debuggers(dbg).141024-1500) x86fre
    LAST_CONTROL_TRANSFER: from 82e7eaa8 to 82ecb879
    STACK_TEXT:
    WARNING: Stack unwind information not available. Following frames may be wrong.
    ad0baf90 82e7eaa8 00000000 afa99150 00000000 nt+0x8d879
    ad0bafa8 88c557d7 badb0d00 00000000 88c4ceb0 nt+0x40aa8
    ad0bb040 88c4f97d 001a99b0 afa91000 00000000 mfehidk+0x377d7
    ad0bb090 88c52b16 00770220 ad0bb0fc 00000010 mfehidk+0x3197d
    ad0bb0bc 98d5fb73 ae770220 ad0bb0fc 00000010 mfehidk+0x34b16
    ad0bb140 98d5fc43 ae738c30 98d6b62a aace7220 HipShieldK+0xb73
    ad0bb168 98d6b882 ad0bb19c 00000000 98d77b44 HipShieldK+0xc43
    ad0bb1b8 98d631a9 00000bd4 0000102c ad0bb208 HipShieldK+0xc882
    ad0bb330 88c47795 00000bd4 0000102c ad0bb401 HipShieldK+0x41a9
    ad0bb400 88c22b57 0000102c ad0bb460 85b3dee0 mfehidk+0x29795
    ad0bb41c 88c232c6 ad0bb430 0000000c 8c4b6ce0 mfehidk+0x4b57
    ad0bb43c 830a5acb adb6b9b8 0000102c ad0bb460 mfehidk+0x52c6
    ad0bb4f4 830adaf8 adb16030 01b6b9b8 ad0bb550 nt+0x267acb
    ad0bbc00 82e7b8c6 038ae710 038ae6ec 02000000 nt+0x26faf8
    ad0bbc34 77a470f4 badb0d00 038ae3dc 00000000 nt+0x3d8c6
    ad0bbc38 badb0d00 038ae3dc 00000000 00000000 0x77a470f4
    ad0bbc3c 038ae3dc 00000000 00000000 00000000 0xbadb0d00
    ad0bbc40 00000000 00000000 00000000 00000000 0x38ae3dc
    STACK_COMMAND: kb
    FOLLOWUP_IP:
    mfehidk+377d7
    88c557d7 0fb70c06 movzx ecx,word ptr [esi+eax]
    SYMBOL_STACK_INDEX: 2
    SYMBOL_NAME: mfehidk+377d7
    FOLLOWUP_NAME: MachineOwner
    IMAGE_NAME: mfehidk.sys
    BUCKET_ID: WRONG_SYMBOLS
    FAILURE_BUCKET_ID: WRONG_SYMBOLS
    ANALYSIS_SOURCE: KM
    FAILURE_ID_HASH_STRING: km:wrong_symbols
    FAILURE_ID_HASH: {70b057e8-2462-896f-28e7-ac72d4d365f8}
    Followup: MachineOwner
    quit:
    output when run in my app:-
    Microsoft (R) Windows Debugger Version 6.3.9600.17298 X86
    Copyright (c) Microsoft Corporation. All rights reserved.
    Loading Dump File [C:\Windows\MiniDump\042414-24632-01.dmp]
    Mini Kernel Dump File: Only registers and stack trace are available
    Symbol search path is: *** Invalid ***
    * Symbol loading may be unreliable without a symbol search path. *
    * Use .symfix to have the debugger choose a symbol path. *
    * After setting your symbol path, use .reload to refresh symbol locations. *
    Executable search path is:
    * Symbols can not be loaded because symbol path is not initialized. *
    * The Symbol Path can be set by: *
    * using the _NT_SYMBOL_PATH environment variable. *
    * using the -y <symbol_path> argument when starting the debugger. *
    * using .sympath and .sympath+ *
    Unable to load image \SystemRoot\system32\ntkrnlpa.exe, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for ntkrnlpa.exe
    *** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
    Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x86 compatible
    Product: WinNt, suite: TerminalServer SingleUserTS
    Built by: 7601.18205.x86fre.win7sp1_gdr.130708-1532
    Machine Name:
    Kernel base = 0x82e3e000 PsLoadedModuleList = 0x82f874d0
    Debug session time: Thu Apr 24 13:36:18.672 2014 (UTC + 1:00)
    System Uptime: 0 days 0:00:38.703
    * Symbols can not be loaded because symbol path is not initialized. *
    * The Symbol Path can be set by: *
    * using the _NT_SYMBOL_PATH environment variable. *
    * using the -y <symbol_path> argument when starting the debugger. *
    * using .sympath and .sympath+ *
    Unable to load image \SystemRoot\system32\ntkrnlpa.exe, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for ntkrnlpa.exe
    *** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
    Loading Kernel Symbols
    Loading User Symbols
    Loading unloaded module list
    ************* Symbol Loading Error Summary **************
    Module name Error
    ntkrnlpa The system cannot find the file specified
    You can troubleshoot most symbol related issues by turning on symbol loading diagnostics (!sym noisy) and repeating the
    command that caused symbols to be loaded.
    You should also verify that your symbol search path (.sympath) is correct.
    * Bugcheck Analysis *
    Use !analyze -v to get detailed debugging information.
    BugCheck 50, {afa99150, 0, 88c557d7, 0}
    *** WARNING: Unable to verify timestamp for mssmbios.sys
    *** ERROR: Module load completed but symbols could not be loaded for mssmbios.sys
    *** WARNING: Unable to verify timestamp for mfehidk.sys
    *** ERROR: Module load completed but symbols could not be loaded for mfehidk.sys
    *** WARNING: Unable to verify timestamp for HipShieldK.sys
    *** ERROR: Module load completed but symbols could not be loaded for HipShieldK.sys
    ***** Kernel symbols are WRONG. Please fix symbols to do analysis.
    *** Either you specified an unqualified symbol, or your debugger ***
    *** doesn't have full symbol information. Unqualified symbol ***
    *** resolution is turned off by default. Please either specify a ***
    *** fully qualified symbol module!symbolname, or enable resolution ***
    *** of unqualified symbols by typing ".symopt- 100". Note that ***
    *** enabling unqualified symbol resolution with network symbol ***
    *** server shares in the symbol path may cause the debugger to ***
    *** appear to hang for long periods of time when an incorrect ***
    *** symbol name is typed or the network symbol server is down. ***
    *** For some commands to work properly, your symbol path ***
    *** must point to .pdb files that have full type information. ***
    *** Certain .pdb files (such as the public OS symbols) do not ***
    *** contain the required information. Contact the group that ***
    *** provided you with these symbols if you need this command to ***
    *** work. ***
    *** Type referenced: nt!_KPRCB ***
    *** Either you specified an unqualified symbol, or your debugger ***
    *** doesn't have full symbol information. Unqualified symbol ***
    *** resolution is turned off by default. Please either specify a ***
    *** fully qualified symbol module!symbolname, or enable resolution ***
    *** of unqualified symbols by typing ".symopt- 100". Note that ***
    *** enabling unqualified symbol resolution with network symbol ***
    *** server shares in the symbol path may cause the debugger to ***
    *** appear to hang for long periods of time when an incorrect ***
    *** symbol name is typed or the network symbol server is down. ***
    *** For some commands to work properly, your symbol path ***
    *** must point to .pdb files that have full type information. ***
    *** Certain .pdb files (such as the public OS symbols) do not ***
    *** contain the required information. Contact the group that ***
    *** provided you with these symbols if you need this command to ***
    *** work. ***
    *** Type referenced: nt!_KPRCB ***
    *** Either you specified an unqualified symbol, or your debugger ***
    *** doesn't have full symbol information. Unqualified symbol ***
    *** resolution is turned off by default. Please either specify a ***
    *** fully qualified symbol module!symbolname, or enable resolution ***
    *** of unqualified symbols by typing ".symopt- 100". Note that ***
    *** enabling unqualified symbol resolution with network symbol ***
    *** server shares in the symbol path may cause the debugger to ***
    *** appear to hang for long periods of time when an incorrect ***
    *** symbol name is typed or the network symbol server is down. ***
    *** For some commands to work properly, your symbol path ***
    *** must point to .pdb files that have full type information. ***
    *** Certain .pdb files (such as the public OS symbols) do not ***
    *** contain the required information. Contact the group that ***
    *** provided you with these symbols if you need this command to ***
    *** work. ***
    *** Type referenced: nt!_KPRCB ***
    Probably caused by : mfehidk.sys ( mfehidk+377d7 )
    Followup: MachineOwner
    Darren Rose

    Try it by opening the Cmd prompt as the actual process and passing the Filename and its arguments as the arguments of the Cmd process.  If you notice there is a "-C" before the Filename and Arguments in this example.  The "-C"
    tells the cmd to execute the commands and then close itself.  You can also use a "-K" which tells the cmd to execute the commands and keep itself open.  Being you are not showing the cmd window you don`t want to keep it opened because the
    user can`t close it so, that is why i used "-C".
     I don`t have the program so, you can just experiment to see what it does.  Maybe you should try using "-K" and show the cmd window by commenting out the CreateNoWindow line so you can see what is in the cmd window while testing.
    Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
    Dim filepath As String = """C:\Program Files (x86)\Windows Kits\8.1\Debuggers\x86\kd"""
    Dim args As String = " -z C:\windows\minidump\042414-24632-01.dmp -c ""!analyze –v;q"""
    Dim p As New Process
    With p.StartInfo
    .FileName = "cmd.exe"
    .Arguments = "-c " & filepath & args
    .UseShellExecute = False
    .CreateNoWindow = True
    .RedirectStandardOutput = True
    End With
    p.Start()
    TextBox1.Text = p.StandardOutput.ReadToEnd
    End Sub
    If you say it can`t be done then i`ll try it

  • Getting an error when running Preflight to embed fonts in Acrobat Pro version 9

    I am running Acrobat Pro version 9.4.5 and when I am running a pre-flight for embedding fonts in my document I am getting an error message as follow: "
    An unexpected error has occurred during the Fixup process ".
    This is occuring at the font processing time. Anybody encountered the same issue.
    One detail which has it importance, I am using TTF fonts and some specific Adobe fonts which are located in the Resource\font directory of my workstation.
    Many thanks for your help.

    Check all your fonts have headers that permit embedding - some commercial fonts don't. Debugging in Preflight is a nightmare, so to find the problem you may have to try the fonts one at a time against a test document until you find the one that whimpers.

  • Why I get an error when running a sequence using the LabVIEW operator interface ?

    I have a simple TestStand sequence calling LabVIEW vis that is giving me an error when I run it with the .exe version of the LabVIEW operator interface and I set TestStand to run the vis using the 8.2.1 runtime engine instead of the development adapter. I made a change in the operator interface to open a vi programatically and get the value of a control, this vi is also used in the TestStand sequence I am trying to run. Could this be causing my problem ?
    Thanks

    Hello Verdulken,
    I have a few additional questions:
    Does your application function correctly when running the LabVIEW operator interface you have created as a VI in the LabVIEW development environment (i.e. does this problem only occur when the LabVIEW operator interface is run as an executable)?
    What is the error that you are receiving?
    Regarding the VI that you open programmatically, do you open it in a visible manner (i.e. use the Show front panel when called option from VI Properties)?If so, do you also close this VI after it finishes (i.e. use the Close if originally closed option from VI Properties)?
    Does the error occur on the step that calls this very same VI again later in the sequence?
    Does your application function correctly if you use the development adapter for all of your calls?
    Thank you in advance for this information,
    Matt G.
    National Instruments
    Applications Engineering

  • Getting BEFOREREPORTTRIGGER error when running report on web

    Hi,
    I have developed a report which uses lexicals in main query. In lexicals I apply filters (if any) which come as parameters from the GUI via a dbase table. When report is run locally using "Run Paper Layout" option it works as desired -- with or without filters.
    When report is run via GUI it runs fine when no filters are applied. Problem comes when any of the filter is applied in any one of the cases selected from the GUI.
    And I get the following errors.
    REP-1419: Please contact the Systems Administrator.
    REP-1419: 'beforereport': PL/SQL program aborted.
    when I go and check the beforereport trigger it does not show any errors when report is run within report builder.
    Any suggestions would be appreciated
    Thanks in advance

    Problem comes when any of the filter is applied in any one of the cases selected from the GUI.Do you mean that the problems only shows when you run the report in your browser via 9iAS?
    Which version are you using?
    Can you post the before report trigger?

  • Getting an error when running my program but it compiles.

    Hey guys, I'm having a problem running the program. Everything compiles correctly, but then I get the error code linked below. Everything I think is correct here. Any ideas? I posted CinReader as well in case you wanted to try compiling and running it yourself.
    Thanks
    public class TextShuffleLevel
         private String jumble;
         private String [] matchString;
         public TextShuffleLevel ()
              jumble = "dunops";
              matchString = new String[5];
              matchString[0] = new String("abound");
              matchString[1] = new String("bound");
              matchString[2] = new String("undo");
              matchString[3] = new String("band");
              matchString[4] = new String("bond");
         public TextShuffleLevel (int whichDefaultLevel)
              if (whichDefaultLevel == 1)
                   jumble = "dunops";
                   matchString = new String[5];
                   matchString[0] = new String("abound");
                   matchString[1] = new String("bound");
                   matchString[2] = new String("undo");
                   matchString[3] = new String("band");
                   matchString[4] = new String("bond");
              else if (whichDefaultLevel == 2)
                   jumble = "srcaso";
                   matchString = new String[11];
                   matchString[0] = new String("across");
                   matchString[1] = new String("crass");
                   matchString[2] = new String("cross");
                   matchString[3] = new String("scars");
                   matchString[4] = new String("soars");
                   matchString[5] = new String("arcs");
                   matchString[6] = new String("soar");
                   matchString[7] = new String("scar");
                   matchString[8] = new String("oars");
                   matchString[9] = new String("cars");
                   matchString[10] = new String("orcs");
              else
                   jumble = "eplcis";
                   matchString = new String[19];
                   matchString[0] = new String("splice");
                   matchString[1] = new String("spiel");
                   matchString[2] = new String("plies");
                   matchString[3] = new String("slice");
                   matchString[4] = new String("clips");
                   matchString[5] = new String("epics");
                   matchString[6] = new String("spice");
                   matchString[7] = new String("epic");
                   matchString[8] = new String("lice");
                   matchString[9] = new String("slip");
                   matchString[10] = new String("clip");
                   matchString[11] = new String("pile");
                   matchString[12] = new String("lisp");
                   matchString[13] = new String("pies");
                   matchString[14] = new String("isle");
                   matchString[15] = new String("lips");
                   matchString[16] = new String("lies");
                   matchString[17] = new String("ices");
                   matchString[18] = new String("pics");
         public TextShuffleLevel (String newJumble, String [] newMatchString)
              jumble = newJumble;
              matchString = newMatchString;
         /* This is the nasty one */
         public boolean findMatch (String matchTry)
              boolean foundMatch = false;
              for (int i=0; i<matchString.length; i++)
                   if (matchTry.equalsIgnoreCase(matchString))
                        foundMatch = true;
                        break;
              return foundMatch;
         public void setJumble (String newJumble)
              jumble = newJumble;
         public void setMatchStrings (String [] newMatchString)
              matchString = newMatchString;
         public String getJumble ()
              return jumble;
         public int getJumbleLength ()
              return jumble.length();
         public int getNumberOfMatches ()
              return matchString.length;
         public String[] getMatchString ()
              return matchString;
    public class TextShuffleGame
         private int playerLevel = 1; // start them on level 1
         private CinReader reader;
         private TextShuffleLevel l1;
         private TextShuffleLevel l2;
         private TextShuffleLevel l3;
         private TextShuffleLevel onTheFly;
         public TextShuffleGame ()
              reader = new CinReader();
              // Using Statically Set Levels
              l1 = new TextShuffleLevel(1);
              l2 = new TextShuffleLevel(2);
              l3 = new TextShuffleLevel(3);
              // this one allows for a 'custom' level
              String fly[] = {"tea","at", "ate"};
              onTheFly = new TextShuffleLevel("eta", fly);
         //Setup for levels
         public void go ()
              boolean quit = false;
              char choice = 'z';
              int lastLevel = 0;
              while (quit == false)
                   lastLevel = playerLevel;
                   if (playerLevel == 1)
                        play(l1);
                   else if (playerLevel == 2)
                        play(l2);
                   else if (playerLevel == 3)
                        play(l3);
                   else
                        play(onTheFly);
                   if (lastLevel == playerLevel)
                        System.out.print("Play the level again");
                   else
                        System.out.print("Play next level");
                   System.out.print("(y/n)? ");
                   choice = reader.readChar();
                   if (choice == 'N' || choice == 'n')
                        quit = true;
         //Playing each level the same
         public void play (TextShuffleLevel theLevel)
              int numGuesses = 0;
              int numCorrect = 0;
              String userString = "";
              System.out.println("What " + theLevel.getJumbleLength() + "-letter words can you get out of " +
                                                 theLevel.getJumble() + "?\n");
              while (numGuesses < 5 && numCorrect < theLevel.getNumberOfMatches())
                        System.out.print("Enter a string: ");
                        userString = reader.readString();
                        if (theLevel.findMatch(userString) == true)
                             System.out.println("Great! A match!");
                             numCorrect = numCorrect + 1;
                        else
                             System.out.println("Drat... not a match");
                             numGuesses = numGuesses + 1;
              if (numCorrect == theLevel.getNumberOfMatches())
                   System.out.println("Terrific! You are ready to try a harder jumble");
                   playerLevel = playerLevel + 1;
         /* FOR TESTING ONLY -- TO BE REMOVED FOR RELEASE */
         public static void main (String [] args)
              TextShuffleGame tsg = new TextShuffleGame();
              tsg.go();
    import java.io.*;
    import java.util.*;
    public class CinReader
         private static final int INT_MESSAGE = 0;
         private static final int DOUBLE_MESSAGE = 1;
         private static final int CHAR_MESSAGE = 2;
         private static final int STRING_MESSAGE = 3;
         private static final int BOOLEAN_MESSAGE = 4;
         private static final String DEFAULT_ERROR_MESSAGE = "Please reenter. ";
         private String prompt = "> ";
         private String [] errorMessages;
         public CinReader ()
              prompt = "> ";
              setDefaultMessages();
         public CinReader (String newPrompt)
              prompt = newPrompt;
              setDefaultMessages();
         public CinReader (String newPrompt, String [] newErrorMessages)
              prompt = newPrompt;
              if (newErrorMessages != null)
                   setErrorMessages(newErrorMessages);
              else
                   setDefaultMessages();
         public void setPrompt (String newPrompt)
              prompt = newPrompt;
         public void setErrorMessages (String [] newErrorMessages)
              if (newErrorMessages != null)
                   int diff = errorMessages.length - newErrorMessages.length;
                   // NEED A MINIMUM OF 5 ERROR MESSAGES TO AVOID ERRORS
                   if (diff > 0)
                        errorMessages = new String[5];
                        for (int i=0; i<5; i++)
                             if (i < newErrorMessages.length)
                                  errorMessages[i] = new String(newErrorMessages);
                             else
                                  errorMessages[i] = new String(DEFAULT_ERROR_MESSAGE);
                   else
                        errorMessages = newErrorMessages;
         public void setErrorMessage (int idx, String msg)
              if (idx >= 0 && idx < errorMessages.length)
                   errorMessages[idx] = msg;
         public void setErrorMessageString (String msg)
              errorMessages[STRING_MESSAGE] = msg;
         public void setErrorMessageInt (String msg)
              errorMessages[INT_MESSAGE] = msg;
         public void setErrorMessageDouble (String msg)
              errorMessages[DOUBLE_MESSAGE] = msg;
         public void setErrorMessageChar (String msg)
              errorMessages[CHAR_MESSAGE] = msg;
         public void setErrorMessageBoolean (String msg)
              errorMessages[BOOLEAN_MESSAGE] = msg;
         public String readString()
              char theChar = 'x';
              String result = "";
              boolean done = false;
              while (!done)
                   theChar = nextChar();
                   if (theChar == '\n')
                        done = true;
                   else if (theChar == '\r'){}
                   else
                        result = result + theChar;
              return result;
         public String readString (boolean allowEmpty)
              String result = readString();
              if (!allowEmpty)
                   while (result.length() == 0)
                        System.out.println("Empty input not allowed. " + errorMessages[STRING_MESSAGE]);
                        System.out.print(prompt);
                        result = readString();
              return result;
         public String readString (int charLimit)
              String result = readString();
              if (result.length() > charLimit)
                   result = result.substring(0, charLimit);
              return result;
         public String readString (boolean allowEmpty, int charLimit)
              String result = readString(allowEmpty);
              if (result.length() > charLimit)
                   result = result.substring(0, charLimit);
              return result;
         public int readInt()
              String inputString = "";
              int number = 0;
              boolean done = false;
              while (!done)
                   try
                        inputString = readString();
                        inputString = inputString.trim();
                        number = (Integer.valueOf(inputString).intValue());
                        done = true;
                   catch (NumberFormatException e)
                        System.out.println("Input is not an integer. " + errorMessages[INT_MESSAGE]);
                        System.out.print(prompt);
              return number;
         public int readInt(int min, int max)
              String inputString = "";
              int number = 0;
              boolean done = false;
              while (!done)
                   try
                        inputString = readString();
                        inputString = inputString.trim();
                        number = (Integer.valueOf(inputString).intValue());
                        if (number < min || number > max)
                             System.out.println("Please enter an integer between " + min + " and " + max);
                        else
                             done = true;
                   catch (NumberFormatException e)
                        System.out.println("Input is not an integer. " + errorMessages[INT_MESSAGE]);
                        System.out.print(prompt);
              return number;
         public double readDouble()
              String inputString = "";
              double number = 0;
              boolean done = false;
              while (!done)
                   try
                        inputString = readString();
                        inputString = inputString.trim();
                        number = (Double.valueOf(inputString).doubleValue());
                        done = true;
                   catch (NumberFormatException e)
                        System.out.println("Input is not an integer. " + errorMessages[DOUBLE_MESSAGE]);
                        System.out.print(prompt);
              return number;
         public char readChar()
              boolean done = false;
              String inputString = "";
              char nonWhite = 'x';
              while (!done)
                   inputString = readString();
                   inputString = inputString.trim();
                   if (inputString.length() != 1)
                        System.out.println("Input must be a single character. " + errorMessages[CHAR_MESSAGE]);
                        System.out.print(prompt);
    else
    nonWhite = (inputString.charAt(0));
    done = true;
              return nonWhite;
         public char readChar (String range)
              char theChar = 'x';
              boolean done = false;
              while (!done)
                   theChar = readChar();
                   for (int i=0; i<range.length(); i++)
                        if (theChar == range.charAt(i))
                             done = true;
                             break;
                   if (!done)
                        System.out.print("Invalid input. Please enter one of the following -> ");
                        for (int i=0; i<range.length(); i++)
                             System.out.print(range.charAt(i) + " ");
                        System.out.print("\n" + prompt);
              return theChar;
         public boolean readBoolean()
              boolean done = false;
              String inputString = "";
              boolean result = false;
              while (!done)
                   inputString = readString(false);
                   inputString = inputString.trim();
                   if (inputString.equalsIgnoreCase("true") || inputString.equalsIgnoreCase("t"))
                        result = true;
                        done = true;
                   else if (inputString.equalsIgnoreCase("false") || inputString.equalsIgnoreCase("f"))
                        result = false;
                        done = true;
                   else
                        System.out.println("Input must be [t]rue or [f]alse. " + errorMessages[BOOLEAN_MESSAGE]);
                        System.out.print(prompt);
              return result;
         private void setDefaultMessages ()
              errorMessages = new String[5];
              for (int i=0; i<errorMessages.length; i++)
                   errorMessages[i] = new String(DEFAULT_ERROR_MESSAGE);
         private char nextChar()
              int charAsInt = -1;
              try
                   charAsInt = System.in.read();
              catch(IOException e)
                   System.out.println(e.getMessage());
                   System.out.println("Fatal error. Exiting program.");
                   System.exit(0);
              return (char)charAsInt;

    Ok, here's what I did using the JSE 8.1 IDE.
    1) I copied your code into a .java file named "TextShuffleGame".
    It generated about half a dozon errors.
    There are three classes in the program:
    TextShuffleLevel
    TextShuffleGame
    CinReader
    Each of these classes is declared "public" and I got the same error message on each one:
    "class ... is public, should be declared in a file name ... .java"
    so, I...
    2) tried changing them to "private".
    It then said: "modifier private not allowed here".
    so, I...
    3) deleted the modifiers for these three classes and left them as just class. No errors.
    The next two errors had to do with the two import statements:
    "import java.io.*;" and "import java.util.*;".
    It said: "'class' or 'identifier' expected" for both. So, I...
    4) moved them to the top of the source file.
    Didn't help at first. So, I...
    5) fiddle around with them a bit.
    I tried "java.io;" and "java.util;" and then "java.*;" by itself. Still got errors. So, I put them back as you had them and for some mysterious reason, my editor decided they were fine. oO
    This also corrected the last errors in the "CinReader" class. Here is the error-free code I now have in my "TextShuffleGame.java" file:
    import java.io.*;
    import java.util.*;
    class TextShuffleLevel
         private String jumble;
         private String [] matchString;
         public TextShuffleLevel ()
              jumble = "dunops";
              matchString = new String[5];
              matchString[0] = new String("abound");
              matchString[1] = new String("bound");
              matchString[2] = new String("undo");
              matchString[3] = new String("band");
              matchString[4] = new String("bond");
         public TextShuffleLevel (int whichDefaultLevel)
              if (whichDefaultLevel == 1)
                   jumble = "dunops";
                   matchString = new String[5];
                   matchString[0] = new String("abound");
                   matchString[1] = new String("bound");
                   matchString[2] = new String("undo");
                   matchString[3] = new String("band");
                   matchString[4] = new String("bond");
              else if (whichDefaultLevel == 2)
                   jumble = "srcaso";
                   matchString = new String[11];
                   matchString[0] = new String("across");
                   matchString[1] = new String("crass");
                   matchString[2] = new String("cross");
                   matchString[3] = new String("scars");
                   matchString[4] = new String("soars");
                   matchString[5] = new String("arcs");
                   matchString[6] = new String("soar");
                   matchString[7] = new String("scar");
                   matchString[8] = new String("oars");
                   matchString[9] = new String("cars");
                   matchString[10] = new String("orcs");
              else
                   jumble = "eplcis";
                   matchString = new String[19];
                   matchString[0] = new String("splice");
                   matchString[1] = new String("spiel");
                   matchString[2] = new String("plies");
                   matchString[3] = new String("slice");
                   matchString[4] = new String("clips");
                   matchString[5] = new String("epics");
                   matchString[6] = new String("spice");
                   matchString[7] = new String("epic");
                   matchString[8] = new String("lice");
                   matchString[9] = new String("slip");
                   matchString[10] = new String("clip");
                   matchString[11] = new String("pile");
                   matchString[12] = new String("lisp");
                   matchString[13] = new String("pies");
                   matchString[14] = new String("isle");
                   matchString[15] = new String("lips");
                   matchString[16] = new String("lies");
                   matchString[17] = new String("ices");
                   matchString[18] = new String("pics");
         public TextShuffleLevel (String newJumble, String [] newMatchString)
              jumble = newJumble;
              matchString = newMatchString;
         /* This is the nasty one */
         public boolean findMatch (String matchTry)
              boolean foundMatch = false;
              for (int i=0; i<matchString.length; i++)
                   if (matchTry.equalsIgnoreCase(matchString))
                        foundMatch = true;
                        break;
              return foundMatch;
         public void setJumble (String newJumble)
              jumble = newJumble;
         public void setMatchStrings (String [] newMatchString)
              matchString = newMatchString;
         public String getJumble ()
              return jumble;
         public int getJumbleLength ()
              return jumble.length();
         public int getNumberOfMatches ()
              return matchString.length;
         public String[] getMatchString ()
              return matchString;
    class TextShuffleGame
         private int playerLevel = 1; // start them on level 1
         private CinReader reader;
         private TextShuffleLevel l1;
         private TextShuffleLevel l2;
         private TextShuffleLevel l3;
         private TextShuffleLevel onTheFly;
         public TextShuffleGame ()
              reader = new CinReader();
              // Using Statically Set Levels
              l1 = new TextShuffleLevel(1);
              l2 = new TextShuffleLevel(2);
              l3 = new TextShuffleLevel(3);
              // this one allows for a 'custom' level
              String fly[] = {"tea","at", "ate"};
              onTheFly = new TextShuffleLevel("eta", fly);
         //Setup for levels
         public void go ()
              boolean quit = false;
              char choice = 'z';
              int lastLevel = 0;
              while (quit == false)
                   lastLevel = playerLevel;
                   if (playerLevel == 1)
                        play(l1);
                   else if (playerLevel == 2)
                        play(l2);
                   else if (playerLevel == 3)
                        play(l3);
                   else
                        play(onTheFly);
                   if (lastLevel == playerLevel)
                        System.out.print("Play the level again");
                   else
                        System.out.print("Play next level");
                   System.out.print("(y/n)? ");
                   choice = reader.readChar();
                   if (choice == 'N' || choice == 'n')
                        quit = true;
         //Playing each level the same
         public void play (TextShuffleLevel theLevel)
              int numGuesses = 0;
              int numCorrect = 0;
              String userString = "";
              System.out.println("What " + theLevel.getJumbleLength() + "-letter words can you get out of " +
                                                 theLevel.getJumble() + "?\n");
              while (numGuesses < 5 && numCorrect < theLevel.getNumberOfMatches())
                        System.out.print("Enter a string: ");
                        userString = reader.readString();
                        if (theLevel.findMatch(userString) == true)
                             System.out.println("Great! A match!");
                             numCorrect = numCorrect + 1;
                        else
                             System.out.println("Drat... not a match");
                             numGuesses = numGuesses + 1;
              if (numCorrect == theLevel.getNumberOfMatches())
                   System.out.println("Terrific! You are ready to try a harder jumble");
                   playerLevel = playerLevel + 1;
         /* FOR TESTING ONLY -- TO BE REMOVED FOR RELEASE */
         public static void main (String [] args)
              TextShuffleGame tsg = new TextShuffleGame();
              tsg.go();
    class CinReader
         private static final int INT_MESSAGE = 0;
         private static final int DOUBLE_MESSAGE = 1;
         private static final int CHAR_MESSAGE = 2;
         private static final int STRING_MESSAGE = 3;
         private static final int BOOLEAN_MESSAGE = 4;
         private static final String DEFAULT_ERROR_MESSAGE = "Please reenter. ";
         private String prompt = "> ";
         private String [] errorMessages;
         public CinReader ()
              prompt = "> ";
              setDefaultMessages();
         public CinReader (String newPrompt)
              prompt = newPrompt;
              setDefaultMessages();
         public CinReader (String newPrompt, String [] newErrorMessages)
              prompt = newPrompt;
              if (newErrorMessages != null)
                   setErrorMessages(newErrorMessages);
              else
                   setDefaultMessages();
         public void setPrompt (String newPrompt)
              prompt = newPrompt;
         public void setErrorMessages (String [] newErrorMessages)
              if (newErrorMessages != null)
                   int diff = errorMessages.length - newErrorMessages.length;
                   // NEED A MINIMUM OF 5 ERROR MESSAGES TO AVOID ERRORS
                   if (diff > 0)
                        errorMessages = new String[5];
                        for (int i=0; i<5; i++)
                             if (i < newErrorMessages.length)
                                  errorMessages[i] = new String(newErrorMessages[i]);
                             else
                                  errorMessages[i] = new String(DEFAULT_ERROR_MESSAGE);
                   else
                        errorMessages = newErrorMessages;
         public void setErrorMessage (int idx, String msg)
              if (idx >= 0 && idx < errorMessages.length)
                   errorMessages[idx] = msg;
         public void setErrorMessageString (String msg)
              errorMessages[STRING_MESSAGE] = msg;
         public void setErrorMessageInt (String msg)
              errorMessages[INT_MESSAGE] = msg;
         public void setErrorMessageDouble (String msg)
              errorMessages[DOUBLE_MESSAGE] = msg;
         public void setErrorMessageChar (String msg)
              errorMessages[CHAR_MESSAGE] = msg;
         public void setErrorMessageBoolean (String msg)
              errorMessages[BOOLEAN_MESSAGE] = msg;
         public String readString()
              char theChar = 'x';
              String result = "";
              boolean done = false;
              while (!done)
                   theChar = nextChar();
                   if (theChar == '\n')
                        done = true;
                   else if (theChar == '\r'){}
                   else
                        result = result + theChar;
              return result;
         public String readString (boolean allowEmpty)
              String result = readString();
              if (!allowEmpty)
                   while (result.length() == 0)
                        System.out.println("Empty input not allowed. " + errorMessages[STRING_MESSAGE]);
                        System.out.print(prompt);
                        result = readString();
              return result;
         public String readString (int charLimit)
              String result = readString();
              if (result.length() > charLimit)
                   result = result.substring(0, charLimit);
              return result;
         public String readString (boolean allowEmpty, int charLimit)
              String result = readString(allowEmpty);
              if (result.length() > charLimit)
                   result = result.substring(0, charLimit);
              return result;
         public int readInt()
              String inputString = "";
              int number = 0;
              boolean done = false;
              while (!done)
                   try
                        inputString = readString();
                        inputString = inputString.trim();
                        number = (Integer.valueOf(inputString).intValue());
                        done = true;
                   catch (NumberFormatException e)
                        System.out.println("Input is not an integer. " + errorMessages[INT_MESSAGE]);
                        System.out.print(prompt);
              return number;
         public int readInt(int min, int max)
              String inputString = "";
              int number = 0;
              boolean done = false;
              while (!done)
                   try
                        inputString = readString();
                        inputString = inputString.trim();
                        number = (Integer.valueOf(inputString).intValue());
                        if (number < min || number > max)
                             System.out.println("Please enter an integer between " + min + " and " + max);
                        else
                             done = true;
                   catch (NumberFormatException e)
                        System.out.println("Input is not an integer. " + errorMessages[INT_MESSAGE]);
                        System.out.print(prompt);
              return number;
         public double readDouble()
              String inputString = "";
              double number = 0;
              boolean done = false;
              while (!done)
                   try
                        inputString = readString();
                        inputString = inputString.trim();
                        number = (Double.valueOf(inputString).doubleValue());
                        done = true;
                   catch (NumberFormatException e)
                        System.out.println("Input is not an integer. " + errorMessages[DOUBLE_MESSAGE]);
                        System.out.print(prompt);
              return number;
         public char readChar()
              boolean done = false;
              String inputString = "";
              char nonWhite = 'x';
              while (!done)
                   inputString = readString();
                   inputString = inputString.trim();
                   if (inputString.length() != 1)
                        System.out.println("Input must be a single character. " + errorMessages[CHAR_MESSAGE]);
                        System.out.print(prompt);
    else
    nonWhite = (inputString.charAt(0));
    done = true;
              return nonWhite;
         public char readChar (String range)
              char theChar = 'x';
              boolean done = false;
              while (!done)
                   theChar = readChar();
                   for (int i=0; i<range.length(); i++)
                        if (theChar == range.charAt(i))
                             done = true;
                             break;
                   if (!done)
                        System.out.print("Invalid input. Please enter one of the following -> ");
                        for (int i=0; i<range.length(); i++)
                             System.out.print(range.charAt(i) + " ");
                        System.out.print("\n" + prompt);
              return theChar;
         public boolean readBoolean()
              boolean done = false;
              String inputString = "";
              boolean result = false;
              while (!done)
                   inputString = readString(false);
                   inputString = inputString.trim();
                   if (inputString.equalsIgnoreCase("true") || inputString.equalsIgnoreCase("t"))
                        result = true;
                        done = true;
                   else if (inputString.equalsIgnoreCase("false") || inputString.equalsIgnoreCase("f"))
                        result = false;
                        done = true;
                   else
                        System.out.println("Input must be [t]rue or [f]alse. " + errorMessages[BOOLEAN_MESSAGE]);
                        System.out.print(prompt);
              return result;
         private void setDefaultMessages ()
              errorMessages = new String[5];
              for (int i=0; i < errorMessages.length; i++)
                   errorMessages[i] = new String(DEFAULT_ERROR_MESSAGE);
         private char nextChar()
              int charAsInt = -1;
              try
                   charAsInt = System.in.read();
              catch(IOException e)
                   System.out.println(e.getMessage());
                   System.out.println("Fatal error. Exiting program.");
                   System.exit(0);
              return (char)charAsInt;
    Hope that helps.

  • Get an error when run eclipse

    Hi
    after download sdk1.3, sdkee1.3.1, eclipse2.0.2 and when run eclipse i got the following error
    JVM terminated. Exit code=2
    c:\WINNT\syste,32\javaw.exe
    -cp E:\program Files\eclipse\startup.jar org.eclipse.core.launcher.main
    -os win32
    -ws win32
    -arch x86
    -showsplash e:\program files\eclipse\eclipse.exe -showsplash 600
    pls tell me what is the problem

    Hi,
    You certainly have an older version of java.exe and javaw.exe in your windows directory.
    Replace them with the corresponding programs you will find in the jdk1.xx/bin you are using. (jdk1.4/bin for example).
    I have had the same problem running eclipse under windows2000 .So I have replaced the too old java.exe and javaw.exe (which were old verions from year 2001) with the newest version from my last jdk1.4 install and now all is working fine.
    hope that's help
    Regards
    Olivier Constans

  • Getting compiler error when running EnvExample.cpp

    Hi All,
    Im a newbie to use Berkeley DB and facing the problem when running the EnvExample.cpp.
    Please let me know what could be the problem??
    here is the command I used to run and the error I got.
    gcc -I/usr/local/BerkeleyDB.4.5/include EnvExample.cpp -L/usr/local/BerkeleyDB.4.5/lib -ldb_cxx-4.5
    In file included from /usr/lib/gcc/i386-redhat-linux/4.0.0/../../../../include/c++/4.0.0/backward/iostream.h:31,
    from /usr/local/BerkeleyDB.4.5/include/db_cxx.h:60,
    from EnvExample.cpp:19:
    /usr/lib/gcc/i386-redhat-linux/4.0.0/../../../../include/c++/4.0.0/backward/backward_warning.h:32:2: warning: #warning This file includes at least one deprecated or antiquated header. Please consider using one of the 32 headers found in section 17.4.1.2 of the C++ standard. Examples include substituting the <X> header for the <X.h> header for C++ includes, or <iostream> instead of the deprecated header <iostream.h>. To disable this warning use -Wno-deprecated.
    In file included from EnvExample.cpp:19:
    /usr/local/BerkeleyDB.4.5/include/db_cxx.h:61:23: error: exception.h: No such file or directory
    /usr/local/BerkeleyDB.4.5/include/db_cxx.h:1053: error: expected class-name before ‘{’ token
    Thanks
    Senthil
    Message was edited by:
    user586105

    Hi Senthil,
    A few pointers:
    Since you are compiling the C++ version, you should probably be using g++, not gcc.
    The problem is probably that you don't have the HAVE_CXX_STDHEADERS flag defined. Try running the following instead:
    g++ -DHAVE_CXX_STDHEADERS -I/usr/local/BerkeleyDB.4.5/include EnvExample.cpp -L/usr/local/BerkeleyDB.4.5/lib -ldb_cxx-4.5Let us know if that helps.
    - Alex

  • Updated to 10.6.1 and now I get this error when running permissions

    I am getting this error and didn't before I updated:
    Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.

    this message is harmless and should be ignored like all similar messages in the past
    http://support.apple.com/kb/TS1448

  • Process chain failed with Error-Status Change of Process ABAP ZL321NIMIMUUT

    Hi,
    process chain got failed with Error --**Status Change of Process ABAP ZL321NIMIMUUT
                                                                   Save Status and Trigger Events if Appropriate**

    Hi Neha,
    When we do the repeat after right click then we are getting this messege"--**Status Change of Process ABAP ZL321NIMIMUUT
    Save Status and Trigger Events if Appropriate**"
    I have come to know that there is one ABAP programe when we go to manage varient.
    ABAP Programme"ZBWR_ZMYYNNINOH_CSV_CHANGE"

  • Getting this error when running a form. HTTP Listner is not available

    I am using windows XP Professional. I have the 9i database running fine. I can launch form developer and connect to my database (which is on the same machine but in different homes.) I get a Http listner error no available when I go to run the form. I looked at my administrative settings for the HTTP listner service but I do not see it I only see the TNS lister.
    Does any one know what I need to do run a form successfuly with getting the HTTP listner error

    Hi,
    to start OC4J you go to start--> programs --> Oracle9i Developer Suite --> Forms Developer --> Start OC4J Instance
    Frank

Maybe you are looking for

  • IWeb HTML Snippet--Facebook Badge

    I've had a Facebook HTML Snippet on my iWeb home page for over a year and suddenly this week, it quit working. I just see the outline box with a question mark in the middle now. I tried deleting the snippet an republishing it several times. I've repa

  • Solaris Intel ( Network Card )

    Having problem to connect Solaris 8 Intel on Network. Using IBM PCI 10/100 Ethernet Adapter. Check hardware compatibility list, and the card is in the list. I gave two computer, with Linksys 4 port hub. Give the computer name comp1 with ip address 10

  • More Multiplexer Error issues...

    Hello all, iLife 08' here, had 06' made 15-20 different dvds perfectly in the past few months. I am making a dvd on short notice for a wedding; and now I get this.. I also have Final Cut Express installed, but it was not used for this little project.

  • Iphone totally cannot open. done the restore and still cannot. when i pluck in and restore, it just say no iphone contacted

    when i was using my phone 1/2 way, it just blackout when i was using my portable charger too.. it show charge n no charge n charge n no charge and blackout. i tried to restore from computer but it doesnt work

  • Installed iTunes 6 but my library shows as empty

    Hello, I installed iTunes 6.0 and assumed, based on previous updating experience, that my library would be imported from iTunes 4.x. not so. How do I now access old playlists, etc, as my older version of iTunes is no longer accesible, please? Do i ha