Process.conf file not found after installing Sun One Portal Server 6.0

This extract is from the Sun One Portal Server development guide for logging error or logs in log file. This says that to generate the log, entry should be done to enable logging in process.conf file. I could not find any such file after installing Sun One Portal Server 6.0.
Any help will be appreciated...
Reporting Errors to the Robot Log File
When problems occur, robot application functions should return an appropriate response status code (such as REQ_ABORTED), and they should also log an error inthe error log file.
To use the error-logging functionality, you must include the file log.h in thesdk/robot/include/libcs directory. After you have ensured that log.h exists in the correct place, you can use the cslog_error macro to report errors. The prototype is in the following format:
cslog_error(int n, int loglevel, char* errorMessage)
The first parameter is not currently used (may be used in the future) You can pass
this as any integer.
The second parameter is the log level. When the log level is less than or equal to the log level setting in the file process.conf, the error message is written in the robot.log.

Since removing the log settings from magnus.conf failed to fix the problem, the log settings are probably not the source of the problem.
Did anything else - e.g. ColdFusion configuration changes - occur at about the same time you changed the log settings?

Similar Messages

  • Error while Starting Sun One Portal Server 6.0

    Hi Everyone,
    I am trying to install Sun One Portal Server 6.0 Installation. When I start the server (./amserver startall) , I am getting the following in the console
    =========================
    starting auth helpers ...
    done.
    checking for directory server ... directory server already running
    done
    starting web server ... iPlanet-WebServer-Enterprise/6.0SP10 B10/12/2005 00:16
    warning: daemon is running as super-user
    [LS ls1] http://test.myserver.com, port 80 ready to accept requests
    java.lang.NoSuchMethodError: Service
    unable to start
    iPlanet-WebServer-Enterprise/6.0SP10 B10/12/2005 00:16
    warning: daemon is running as super-user
    [LS ls1] http://test.myserver.com, port 8089 ready to accept requests
    java.lang.NoSuchMethodError: Service
    unable to start
    done.
    =========================================================
    When I check in the error log, I am getting the following error message
    ========================================================
    [18/Jul/2008:13:14:42] info (11354): successful server startup
    [18/Jul/2008:13:14:42] info (11354): iPlanet-WebServer-Enterprise/6.0SP10 B10/12/2005 00:16
    [18/Jul/2008:13:14:42] info (11355): Installing a new configuration
    [18/Jul/2008:13:14:42] info (11355): [LS ls1] http://test.myserver.com, port 80 ready to accept requests
    [18/Jul/2008:13:14:42] info (11355): A new configuration was successfully installed
    [18/Jul/2008:13:14:43] failure (11355): Internal error: Unable to find required methods in Java classes
    [18/Jul/2008:13:14:43] failure (11355): Late initialization failed: Error running init function(late) NSServletLateInit: unknown error
    =========================================================================
    Can anybody tell me what could be issue?
    Thanks in Advance.......

    This error is solved.However I don't know about the root cause. We tried using some LDAP server. Then this error get resolved.
    Edited by: Jeya_14 on 31 Jul, 2008 9:09 AM

  • Problem Re-Installing Sun One App Server 7 on Solaris 8

    I will try my best to describe my problem.
    I successfully installed Sun One App Server 7 Standard Edition on Solaris 8. It was installed on a mounted secondary hard disk. That hard disk has since gone bad. I bought a new hard disk and have that mounted.
    I want to install Sun One App Server 7 again. I am installing through the GUI, but do not the options to install the server even though it is completely gone. I guess the installer seems to think that the product is already installed, even though the previous hard disk with all of the application server files are gone. Is there any way to uninstall or remove the installed status of the application server so I can reinstall?
    Thanks.

    Thanks! I tried the prodreg tool and found the Application Server node, and clicked Uninstall. It went through an uninstall process. Even though it came back with an error, the re-install process after worked great. Thanks again.

  • Install Sun ONE Directory Server 5,2 & how to use it for authenticate user

    Good afternoon, Excuse, are newbie in the scope I am learning and putting desire to him, this in my situation I am trying to install Sun ONE Directory Server 5,2 since I understand that this it is application LDAP for Solaris, ok I want to install it to authenticate user against the system, that is to say, to be able to acces the server entering with a created user from the data base of LDAP and make think user that his created in the system. But the documentation that I finds indicates the installation of Sun ONE Directory Server 5,2 but it not clearly about how to use it for authentication. Some one have any manual step by step of Sun ONE Directory Server 5,2 installation and how to make it for authentication systems users.
    I read the forum seeking for anwser and i get confuse
    Thanks for the help and sorry for any inconvenient
    Message was edited by:
    Aku_28
    Message was edited by:
    Aku_28

    I think that I found the Sun endorsed book locations for using LDAP accounts that don't use authentication besides "crypt". I now can use an account with a "ssha" password. It can be more than 8 characters long.
    Chapter 14 System Administration Guide: Naming and Directory Services
    Read page 201 which is the pam.conf file pam_ldap setups. I edited my "/etc/pam.conf" file to reflect this
    Chapter 7 Directory Server 5.2 2005Q4 - Administration Guide
    Read page 316-318 which has a graphical technique to specify password syntax. I set it up and then tried the password by running "su - brahms". It now requires a longer password than 8 characters and it is set up to use "ssha" for that UID entry "brahms".

  • Problems installing Sun ONE Web Server 7.0 on an x86 with Solaris 10

    I am trying to install the new Sun ONE Java Web Server 7.0 on my Solaris 10 machine. This is the error I am getting:
    |-1%--------------25%-----------------50%-----------webResources:errorCreatingLogFile
    Task Failed: java.lang.NullPointsswhereException
    java.lang.NullPointerException
    at com.sun.web.installer.web.actions.PostInstall_core.install(PostInstall_core.java:273)
    at com.sun.install.products.InstallComponent.performInstallation(InstallComponent.java:1465)
    at com.sun.install.products.InstallNode.startInstall(InstallNode.java:1086)
    at com.sun.install.products.InstallComponent.performInstallation(InstallComponent.java:1457)
    at com.sun.install.products.InstallNode.startInstall(InstallNode.java:1086)
    at com.sun.install.products.InstallComponent.performInstallation(InstallComponent.java:1457)
    at com.sun.install.products.Product.performInstallation(Product.java:651)
    at com.sun.install.tasks.ProductTask.perform(ProductTask.java:153)
    at com.sun.wizards.core.Sequence.perform(Sequence.java:343)
    at com.sun.wizards.core.SequenceManager.run(SequenceManager.java:226)
    at java.lang.Thread.run(Thread.java:595)
    This is not a permissions issue, and there are no errors in the /var/sadm/install/logs. Please keep!
    Kristie N. Howard

    Hope, you are considering Sun Web Server 6.1 (formerly known as iPlanet Enterprise Server ) for this task. Yes, it is possible to host multiple instances of web server on a same machine.
    you can create multiple instances using our GUI. here is the pointer to our docs on how to do this - http://docs.sun.com/app/docs/doc/819-6512/6n8h7gq1n?a=view#bhabr
    If you are willing to give Sun Java System Web Server 7 (our latest release - http://www.sun.com/webserver) , then you can do this by CLI as well.
    sun one portal server 3.0 - is a very old release. Are you sure, is this what you want to run ?
    hope this helps

  • How to deploy a WAR file to Sun One Portal Server

    Would someone please tell me the instruction of how to deploy a WAR file to Sun One Portal Server 6.2. Thank you.

    I would advise against this. We tried that and it totally hosed the server.xml file and took our staging portal server down.
    I have no idea what was "in" the server.xml or other files, but trying to deploy a .war file using the WS admin interface hosed portal server's settings.

  • Sun ONE Instant Messaging relation to Sun ONE Portal Server

    Sun ONE Instant Messaging is tightly integrated with the Sun ONE Portal Server. Sun ONE Instant Messaging provides a portlet or channel that displays a list of a given user's online buddies and also provides the capability to archive chat and other forms of IM Communications within the portal server search database. Hence, chat, alerts, news channels and more can be archived and searched using the Search capabilities of the portal server. Indeed, Sun ONE Instant Messaging is a value-added offereng to the core Sun ONE Portal Server.
    It should also be mentioned that Sun ONE Instant Messaging integrates with the Sun ONE Portal Server in other ways. Since the portal server provides a web container, the IM deployment can naturally use the web server provided by the portal server. The portal server also uses a directory server which can also be used by Sun ONE Instant Messaging for User and LDAP group search. Finally, Sun ONE Instant Messaging may also use the portal server's Identity Service to provide single sign-on with the portal server.

    Yes, one can install Sun ONE Instant Messaging on a system that does not contain the Sun ONE Portal Server.

  • Netmeeting Integration with Sun One Portal Server 6.2

    Hi,
    we are trying to integrate MS Netmeeting with Sun one portal server 6.2,using netlet ,has anybody done similar things earlier .then plz help me,
    or any other solution to call netmeeting from portal.

    Suggest trying other forums, as we're specialized into Messaging Server, not portal nor Netmeeting

  • Netmeting  with Sun one Portal server 6.2

    Hi,
    we are trying to integrate MS Netmeeting with Sun one portal server 6.2,using netlet ,has anybody done similar things earlier .then plz help me,
    or any other solution to call netmeeting from portal.

    Suggest trying other forums, as we're specialized into Messaging Server, not portal nor Netmeeting

  • Sun ONE Portal Server 6.1 - Support for doble-byte characters - China/Korea

    Hi,
    Can somebody help me in understanding whether Sun ONE Portal Server support double-byte characters. This is basically to support Chinese & Korean languages. If yes, please guide me through the steps to enable the same.
    Thank you,
    V

    First I tried to force the monitor into 1280x1024@75 mode which does not show the flicker. In three horizontal areas in the screen, the display was very fuzzy. So I had to decide whether use 60Hz mode with the flicker problem or use 75 Hz mode with the fuzzyness problem.
    I tried the first alternative by ignoring the EDID data and force the display mode but I didn't succeed with solving the fuzzyness problem. So I decided to go back to 60 Hz mode and try to solve the flicker problem. (I already tried 'Option "Flicker"  "false" - no effect!) I have no more ideas.
    Last edited by Tristero (2009-06-15 08:37:23)

  • How to deploy a portlet application on Sun One Portal Server?

    Hi all,
    I have developed a JSR168 helloworld portlet.
    how will i deploy that war file to Sun One Portal Server ?
    Thanks & Regards
    ~Neeraj.

    Thanks Shay! I was able to deploy the application per your instructions.
    [10:41:53 AM] Deploying Application...
    [10:42:10 AM] [Deployer:149192]Operation 'deploy' on application 'mobilesolution2 [Version=V2.0]' is in progress on 'AdminServer'
    [10:42:13 AM] [Deployer:149194]Operation 'deploy' on application 'mobilesolution2 [Version=V2.0]' has succeeded on 'AdminServer'
    [10:42:13 AM] Application Deployed Successfully.
    [10:42:13 AM] Elapsed time for deployment: 32 seconds
    [10:42:13 AM] ---- Deployment finished. ----

  • Sun ONE Portal Server on Windows

    I've heard that the initial release for Sun One Portal Server will be available only in Solaris, but the Windows and Linux version are in the works and scheduled to be released during the first half of 2003.
    Anybody can confirm this issue?
    When will a Windows version be available for download?. Is there a beta version yet?
    Regards,
    Guillermo.

    portal application means
    1- portlets (portlet logic + portlet view)
    or
    2- channel + provider (original Sun portal components)
    have a look at
    http://docs.sun.com/app/docs/doc/819-1370
    additionally you can develop JSR168 portlets in combination with JSF straight with Sun Creater 2
    which is currently available as a free beta version
    cheers
    /ulf

  • Error 15: file not found after comp tune X install

    downloaded comptuneX on mid 2010 27in imac to enlarge my bootcamp partition with windows 7.  Now when trying to boot into windows I get,
    Error: file not found...then pressing any key takes me to a RED SCREEN labeled at the top grub4dos, with a menu of options which don't work to do anything I understand.  Can someone please help?
    Thanks

    downloaded comptuneX on mid 2010 27in imac to enlarge my bootcamp partition with windows 7.  Now when trying to boot into windows I get,
    Error: file not found...then pressing any key takes me to a RED SCREEN labeled at the top grub4dos, with a menu of options which don't work to do anything I understand.  Can someone please help?
    Thanks

  • [SOLVED] GRUB 2 - "error: file not found" after Clonezilla Restore

    Hello,
    I backed up my Arch Install which is one root partition covering the entire SDD with Clonezilla, to play around with Gentoo and FreeBSD on my Laptop.
    Now I restored the image and when GRUB 2 loads I see "error: file not found" three times for a short momemt before I'm in the GRUB 2 menu.
    When I boot my I also see these 3 messages (probably the once from the early loading process) and "Loading Linux ck kernel...." "Loading initrafms...." "Press any key to continue..." When I wait for a short time or press enter it boots like expected (fsck message appears for a short time since I'm using quite boot and I'm in KDM after that).
    Grub loading...
    error: file not found
    error: file not found
    error: file not found
    Loading Linux ck kernel...
    Loading initramfs...
    Press any key to continue...
    I did not have this when I  backed it up. It booted into the menu and when I booted the menu entry it would go black to show me the fsck message and seconds later I was in KDM.
    I tried $ sudo grub-mkconfig but it did not change anything.
    This is my current /boot/grub/grub.cfg
    # DO NOT EDIT THIS FILE
    # It is automatically generated by grub-mkconfig using templates
    # from /etc/grub.d and settings from /etc/default/grub
    ### BEGIN /etc/grub.d/00_header ###
    insmod part_gpt
    insmod part_msdos
    if [ -s $prefix/grubenv ]; then
    load_env
    fi
    set default="0"
    if [ x"${feature_menuentry_id}" = xy ]; then
    menuentry_id_option="--id"
    else
    menuentry_id_option=""
    fi
    export menuentry_id_option
    if [ "${prev_saved_entry}" ]; then
    set saved_entry="${prev_saved_entry}"
    save_env saved_entry
    set prev_saved_entry=
    save_env prev_saved_entry
    set boot_once=true
    fi
    function savedefault {
    if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
    fi
    function load_video {
    if [ x$feature_all_video_module = xy ]; then
    insmod all_video
    else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
    fi
    if [ x$feature_default_font_path = xy ] ; then
    font=unicode
    else
    insmod part_msdos
    insmod ext2
    set root='hd0,msdos1'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 a93fa938-f74f-477d-9573-678340bb2940
    else
    search --no-floppy --fs-uuid --set=root a93fa938-f74f-477d-9573-678340bb2940
    fi
    font="/usr/share/grub/unicode.pf2"
    fi
    if loadfont $font ; then
    set gfxmode=auto
    load_video
    insmod gfxterm
    set locale_dir=$prefix/locale
    set lang=en_US
    insmod gettext
    fi
    terminal_input console
    terminal_output gfxterm
    set timeout=5
    ### END /etc/grub.d/00_header ###
    ### BEGIN /etc/grub.d/10_linux ###
    menuentry 'Arch GNU/Linux, with Linux ck kernel' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-ck kernel-true-a93fa938-f74f-477d-9573-678340bb2940' {
    load_video
    set gfxpayload=keep
    insmod gzio
    insmod part_msdos
    insmod ext2
    set root='hd0,msdos1'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 a93fa938-f74f-477d-9573-678340bb2940
    else
    search --no-floppy --fs-uuid --set=root a93fa938-f74f-477d-9573-678340bb2940
    fi
    echo 'Loading Linux ck kernel ...'
    linux /boot/vmlinuz-linux-ck root=/dev/sda1 elevator=noop ro quiet
    echo 'Loading initial ramdisk ...'
    initrd /boot/initramfs-linux-ck.img
    menuentry 'Arch GNU/Linux, with Linux ck kernel (Fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-ck kernel-fallback-a93fa938-f74f-477d-9573-678340bb2940' {
    load_video
    set gfxpayload=keep
    insmod gzio
    insmod part_msdos
    insmod ext2
    set root='hd0,msdos1'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 a93fa938-f74f-477d-9573-678340bb2940
    else
    search --no-floppy --fs-uuid --set=root a93fa938-f74f-477d-9573-678340bb2940
    fi
    echo 'Loading Linux ck kernel ...'
    linux /boot/vmlinuz-linux-ck root=/dev/sda1 elevator=noop ro quiet
    echo 'Loading initial ramdisk ...'
    initrd /boot/initramfs-linux-ck-fallback.img
    menuentry 'Arch GNU/Linux, with Linux core repo kernel' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-true-a93fa938-f74f-477d-9573-678340bb2940' {
    load_video
    set gfxpayload=keep
    insmod gzio
    insmod part_msdos
    insmod ext2
    set root='hd0,msdos1'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 a93fa938-f74f-477d-9573-678340bb2940
    else
    search --no-floppy --fs-uuid --set=root a93fa938-f74f-477d-9573-678340bb2940
    fi
    echo 'Loading Linux core repo kernel ...'
    linux /boot/vmlinuz-linux root=/dev/sda1 elevator=noop ro quiet
    echo 'Loading initial ramdisk ...'
    initrd /boot/initramfs-linux.img
    menuentry 'Arch GNU/Linux, with Linux core repo kernel (Fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-fallback-a93fa938-f74f-477d-9573-678340bb2940' {
    load_video
    set gfxpayload=keep
    insmod gzio
    insmod part_msdos
    insmod ext2
    set root='hd0,msdos1'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 a93fa938-f74f-477d-9573-678340bb2940
    else
    search --no-floppy --fs-uuid --set=root a93fa938-f74f-477d-9573-678340bb2940
    fi
    echo 'Loading Linux core repo kernel ...'
    linux /boot/vmlinuz-linux root=/dev/sda1 elevator=noop ro quiet
    echo 'Loading initial ramdisk ...'
    initrd /boot/initramfs-linux-fallback.img
    ### END /etc/grub.d/10_linux ###
    ### BEGIN /etc/grub.d/20_linux_xen ###
    ### END /etc/grub.d/20_linux_xen ###
    ### BEGIN /etc/grub.d/20_memtest86+ ###
    ### END /etc/grub.d/20_memtest86+ ###
    ### BEGIN /etc/grub.d/30_os-prober ###
    ### END /etc/grub.d/30_os-prober ###
    ### BEGIN /etc/grub.d/40_custom ###
    # This file provides an easy way to add custom menu entries. Simply type the
    # menu entries you want to add after this comment. Be careful not to change
    # the 'exec tail' line above.
    ### END /etc/grub.d/40_custom ###
    ### BEGIN /etc/grub.d/41_custom ###
    if [ -f ${config_directory}/custom.cfg ]; then
    source ${config_directory}/custom.cfg
    elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
    source $prefix/custom.cfg;
    fi
    ### END /etc/grub.d/41_custom ###
    Anyone has a clue what files it is looking for? And why it doesn't boot straight away, when there is nothing that keeps it from booting up normal anyway?
    Last edited by blackout23 (2013-03-21 16:16:59)

    the.ridikulus.rat wrote:Upgrade to grub 2.00, that will give info on which file is actually missing. And then recreate /boot/grub/grub.cfg and check whether that error is gone.
    I think I'm already on Grub 2.0.0 otherwise I wouldn't have this cryptic menu configuration file.
    local/grub-bios 2.00-1
    GNU GRand Unified Bootloader - i386 PC BIOS Modules
    local/grub-common 2.00-1
    GNU GRand Unified Bootloader - Utilities and Common Files

  • Error  of "File not found"  while installing RAC

    Hello Firends,
    After succsssfully installing and running cluster manager on both the nodes ( it is 2-node Cluster), when I try to install oracle software, an error message window poped up stating the following message.
    "File Not Found
    /mnt/cdrom/Disk2/stage/components/oracle.pk2.proc/9.2.0.1.0/Datafiles/bin.1.1.jar"
    Every time I ignore mesage it gives me another error message for differnt file name. So I stoped the installation.
    According to this message it seems that there is no such file on the CD ( DIsk2) . I have a downloaded version of 9.2.0.1 from this site.
    Please give me some suggestion on this.
    Any type of response is highly appreciated.
    Thanks
    Bhsvin

    Hello Firends,
    After succsssfully installing and running cluster manager on both the nodes ( it is 2-node Cluster), when I try to install oracle software, an error message window poped up stating the following message.
    "File Not Found
    /mnt/cdrom/Disk2/stage/components/oracle.pk2.proc/9.2.0.1.0/Datafiles/bin.1.1.jar"
    Every time I ignore mesage it gives me another error message for differnt file name. So I stoped the installation.
    According to this message it seems that there is no such file on the CD ( DIsk2) . I have a downloaded version of 9.2.0.1 from this site.
    Please give me some suggestion on this.
    Any type of response is highly appreciated.
    Thanks
    Bhsvin

Maybe you are looking for