Process Context Updating

Hi,
I have a Context Generated for XSD Data types long ago. Now, I am deleting one of the attributes from this XSD/WSDL file. But, I am not see that change reflect in Process Context.
Whats the easiest way to update the XSD data Types and process context.
Thanks in advance for help.
Sunita.

Sunita,
If you are talking about updating the Data Types for the Task Request/Response then the best way is to remove all the input/output mapping first and then reimport the UI for the task which will automatically update your schema based on context exposed in the selected UI Interface controller. And if you are talking about the schema for the WSDL used to trigger the start event in process then you need to make the changes, save it and build it. Its better to build the project after making changes in Schema/UI Assignment or any other changes.
Hope this answers your question.
Regards,
Arafat

Similar Messages

Task's Process context doesn't get updated in parallel tasking

All,
I have a parallel task in my BPM process flow; the parallel task can have a max of 3 owners. The owners can either approve / reject the task. There are 3 boolean attributes in the process context that are used to store the decisions of these task owners.
When the process is initiated, these 3 attributes are set to true. So, there is no issue if all the 3 owners approve the task. The flow continues. If one of the owners reject first, followed by the other 2 owners approving the task, then the decisions are not captured. Hence, rejection flow is not triggered at all. But if the first 2 owners claiming the task approve and the last one rejects, the rejection flow is triggered.
Observation: When a owner approves / rejects, I am able to see the changed decision in NWA PROCESS context and in the output mapping of this task. But now, when the 2nd owner claims the task, the input mapping of this task doesnt have the updated value of the first owner's decision.
How to solve this issue?
Can someone please assist?
Many thanks,
Subathra M

Hi Subathra,
Is it the same webdynpro component that is assigend to the 3 parallel task? In that case you can use one attribute to capture the decision. if tthe first user selects approve and then the second user select reject the attribute will be updated to reject.
Regards,
Shilpa

My iWeb just crashed and has vanished from my computer. The icon is visible but it will not open. Can anyone help? I desperately need it fixed as its my business website and i was in the process of updating it

My iWeb just crashed and has vanished from my computer. The icon is visible but it will not open. Can anyone help? I desperately need it fixed as its my business website and i was in the process of updating it

Where was this site hosted?
Apple eliminated iWeb in July!!!
http://en.wikipedia.org/wiki/IWeb#Discontinuation_of_iWeb_in_iCloud_Transition
http://www.macworld.com/article/1160728/apple_mobile_me_transition_faq.html

HT4623 I am in the process of updating my iphone4 to ios7 it seems to have updated but i can't go past the terms and conditions page even though I have agreed to them can anyone help

I am in the process of updating my iphone4 to ios 7, it has completed the process but i can"t get past the terms and conditons page although I have agreed to them both - can anyone help?

*** I HAVE THE ANSWER ***
You must goto Settings > General > Reset > Reset All Settings ... this worked 100% for me and once that is compelte go back and try to pass the terms and conditions, you will see the "agree" button in the bottom right hand corner

Need different processes for Update and Delete buttons

I'm using a customized version of the Issue Tracker sample application. I've added a table called project_person(project_id,person_id) so that a project can have multiple people assigned to it and so that one person can have multiple projects. I have a form report that lists all of the projects with an edit link which opens one project. On the individual project page, there are page items for each of the columns in the project table and a item for the person assigned to the project--this item is pulled from the separate project_person table. I have two buttons--Delete and Apply Changes. If you click on Apply Changes, the project table should be updated and then the project_person table if the assignment was changed. If you click on Delete, it should delete the project_person record first and then delete the project record. I created a new conditional pl/sql process that updated two tables if 'Apply Changes' button is cliicked. I then created a separate conditional process when the Delete button is clicked. This conditional process checks to see if a record in the project_person table exists, and if so, delete the record. Then delete the project record.
The update process works fine. The delete process reloads the list of projects with a success message at the top without actually doing a delete and I have no idea why. Does anyone have any suggestions?
I am not using the automatic row processing, but should I? Or is it ok to have the two separate conditions for the two different buttons?

Hello again Miah,
Check the "Sequence Number" for your processes. Typically, APEX will increment by 10, each time you create a Page Process as I recall. You can set this to be any number you want; even if you duplicate the sequence number (ie: you can have multiple Sequence 10 processes).
Make sure that your Delete process is firing properly and walk through the logic in the source code to be sure that any "IF" or "WHERE" logic is satisfied. For example:
Begin
delete from emp_table
where 1=2;
End;If this was your page process code - you would receive a SUCCESS message because the PL/SQL code executed successfully, even though nothing will be deleted since 1 will NEVER equal 2.
So, check Delete Source carefully.
{size:14}{color:green}Can you post the code from your delete page process here?{color}{size}
Good luck,
Don.
REWARDS: Please remember to mark helpful or correct posts on the forum, not just for my answers but for everyone! :)
Edited by: dfcii© on Oct 27, 2009 10:55 AM

Applying presets causes filter settings to get corrupted if process version updated

I have an ongoing problem with Lightroom 5.7 including earlier versions. The problem occurs when editing photos which use previous process versions (ie, 2010). My presets all have the Current Process version checked (as they should). Whenever I apply any preset to a photo, the settings for existing filters get corrupted (reset to 0). This includes my Graduated Filter settings, Adjustment Brush settings and Radial Filter settings. Those filters and their masks remain on the photo but their parameters have all been set to zero. I keep falling into this trap since it's natural to use my presets when making updates to photos. Often I don't realize this occurred until it's too late.
As a work-around (inconvenient) I can first manually update to the current process by right-clicking the photo and saying Settings/Update to Current Process (2012). Or by clicking the Lightening Bolt button in the upper right corner. But this must be done prior to applying any presets and I typically for get as my database has tens of thousands of pics. Even a preset with just the Process Version set will cause the filter settings to be corrupted. I'm not interested in applying a batch or Quick Develop process to all at once since I need to inspect each one as the process is updated. It would be great if this could be fixed in a maintenance release since it keeps biting me. I think it's important that this be fixed in LR 6.0 also. No doubt it's messed up many user's photos without them realizing it. Does anyone know a work-around so Presets can be used?
System: Win7 pro 64 (current), 4.2 GHz i7, 12GB, Lightroom 5.7.

In my opinion: not a good idea to convert old photos en-batch.
Recommend: convert (hand-selected photos) one at a time, or just use PV2012 on new photos.
There are more than one reason:
* As you know, process conversion yields very different results (if photo has been substantially edited).
* It takes some time to polish your PV2012 editing skills.
* Often when you are comparing PV2012 results to previous PV2010 results (which you've become familiar with, and like...), you may interpret differences in a more negative light, than if you were using PV2012 without comparing to a previous PV2010 version.
This last one can not be over-stated. Numerous times I have converted and been disappointed, at least initially. Recovered highlights can seem like loss of contrast. Detail in shadows can be distracting after initial conversion, until you step back for a while, then re-look at it...
Also, the process version itself (results I mean) takes some getting used to (even when not comparing to a previous legacy-pv edit). e.g. if you've become attached to the over-saturated shadows in previous process version, the shadows seem under-saturated in PV2012, etc...
Rob

BPM Process Context Issue

Hi Experts,
Can i use WDJ context as process context in BPM(Once i assigned WDJ component to a Task, i can able to see the WD context in Data types ) or we have to create a separate xsd in BPM. i came to know about this functionality so only asked.
Also i want to pass more values during starting of the process. I know it can be done through WS. Any other option is available?
Regards,
Arun

Hi Arun,
You are triggering the Process in WDJ with a webservice. so the values you assigned to the WS attributes in WD will be available in Start event of the Process.(not in the process context)
Now you can have mapping between your start event and process context to get the data in process context and use it further steps.
Hope it helps.
Thanks.
Priya

What locks are required on a table when Oracle is processing an UPDATE

What locks are required on a table when Oracle is processing an
UPDATE statement?

Welcome to the forum!
Whenever you post provide your 4 digit Oracle version.
>
What locks are required on a table when Oracle is processing an
UPDATE statement?
>
Here is a relevant quote from the 'Lock Modes' section of the doc that Ed Stevens provided
>
Assume that a transaction uses a SELECT ... FOR UPDATE statement to select a single table row. The transaction acquires an exclusive row lock and a row share table lock. The row lock allows other sessions to modify any rows other than the locked row, while the table lock prevents sessions from altering the structure of the table. Thus, the database permits as many statements as possible to execute.
>
The above describes the locks when you, the user, tells Oracle to lock the row.

How to control sequence of Function Modules processed in update task?

Hello,
I've some questions regarding following process that needs to be extended: a Function Module (FM) 'Save' calls several other FM e.g. 'X1' and 'X2' in update task. Those update modules are independent from each other and write data to the database that finalize the save process.
Now a third FM 'X3' needs to be called in update task. This one is also independent from 'X1' and 'X2' but it calls a further FM 'X4' in background task as separate unit which starts a job. This job requires the data from FM 'X1' and 'X2' already persistent on the database. By the way: the FM 'X3' triggers the Access Control Engine (ACE) notification that calculates the authorization data in the mentioned job. Therefore this process needs to be the last FM call in update task in the queue of calls in FM 'Save'.
Questions:
(1) Is it possible to control the process sequence of the FM 'in update task' simply by the sequence they are called in FM 'Save'.
(2) Presumed that all FM beside 'X3' have processing type "Update with immediate start" or "Immediate start, no restart" (in short V1) would it be another solution to specify FM 'X3' with type 'Delayed' to control the process sequence? When a delayed FM will be processed?
(3) Is it uncritical to call in FM 'X3' (already running in update task) the FM 'X4' with addition in background task as separate unit that furthermore starts a job by an event? I'm afraid that this nesting could lead to unexpected errors.
Thank you in advance for your help!
Best regards,
Oliver

ya it will this be in the same sequence only...........
Regards
Anbu

Need a process to update BSO Planning Web form into an ASO Cube

Need a process to update information from the BSO Planning Web form into an ASO Report Cube every (5) five minutes.
Please advise

Thanks here is Part 2 of my questions
Details:
User Input data into a web form for Intersection are the following:
Dim1,Dim2,Dim3,Dim4 , Account AAAA, 1000
Dim1,Dim2,Dim3,Dim4 , Account BBBB, 2000
Dim1,Dim2,Dim3,Dim4 , Account TTTT, 4000
Dim1,Dim2,Dim3,Dim4 , Account ZZZZ, 7000
Design Question:
In the ASO Reporting Cube
AAAA and BBBB are both at level 0 in both cube
TTTT and ZZZZ are being loaded to a parent which is Level 1
MY Issue with the Design Question ???
ASO Cubes can only be load at a level 0.
So how can I complete this task, what are my option:
My thinking process is the XRef Calc Script could push data the cube, than by built a maxl scripts that would run the Calc script and put this scripts into some kind of system scheduler running the Maxl Scripts Every (5) Mintues
or am i way off base here ????
Please advise
Thanks in Advance

IDOC Inbound Processing and updating DN

Hi,
I'm unfamiliar to inbound processing (i just understand the basics). I've dealt with outbound processing and user exits associated with that.
I have a specific client requirement: an Inbound IDOC is to be processed and update a delivery note. Some field of some segment within this inbound idoc will carry some information which I need to extract and update a field in the Delivery Note with. How could I do this?
Inbound message type is DESADV. Does my requirement need user exit programming or can I set up some kind of a batch job process?
Thanks in advance,
Risad

HI,
For processing inbound idoc one process code attached in the partner profile. From this process code you can find out the function module attached to it.
Inside function module use can check for exit or badi to modify DN or write your custom logic. If you already have the test data you can check it from we19. Here you need to select standard inbound.
Thanks
Subhankar

Approval process in update user workflow

Hi
I have read in the document Administrative Guide that by default, the approval process is set only for user creation. and the same does not work for update and delete operations on user, unless we customize the code.
Does any one of you have any idea as to what customization needs to be done for successful approval process for updates also. I have set approvers for resources.
Thanks
Bushra

1. backup the existing Update user workflow as an xml file
2. Copy paste the same in the BPE.
3. Save the copy as a new object with a different name.
4. Edit the new workflow as follows:
4.1 Create new activity
4.2 In the new activity, add a variable with some name
4.3 create a new action, and let that action be a subprocess. For that subprocess, browse and choose 'Approval' as the action.
4.4 Add a argument as name=approvalForm and value=<name of approval form>
4.5 Include argument user=$(user), etc. (Check the original approval workflow to see what the names of the arguments are)
4.6 For return to=name of the variable declared, from=approved
4.7 Add a 'isTrue' condition for the variable declared.
5. Make the appropriate transitions, and ur ready to go.
Let me know if this helps. I can post some skeleton code tomorrow. I need to work on it. Drop a line at [email protected]

Process Context Web Dynpro

Hello,
Can we have one process context across whole BPM and Web Dynpro? My scenario is: Executing BPM in Web Dynpro through a Web Service. Presently I have set two contexts( one is for web dynpro and another for BPM Web Service/Process Context). Can I use one context instead of two types of contexts. Please let me know if there are any limitations.
Thanks,
Sunita.

HI Sunita,
technically you need different contexts for WebDynpro and BPM. This is due to the fact that these are two independent technologies which manage their context data differently. So, you will need a WebDynpro context as well as a Process context for BPM.
But this does not mean that you cannot share and transfer data from one to another. From the WebDynpro context you might fill the WebService input. This can be simply done through context mapping and model binding. Once the WebService gets called, the input data is automatically mapped and transfered to your Process context. Of course, this has to be modelled first in the Process Composer. From here, you might use the context data to map to activites (human and automated) in your process. From here, you are able to again map it to a WebService in case of an automated activity or a WebDynpro context in case of a human activity.
Hope, this brought some more clarity.
Best regards,
Stefan

Empty Process Context

Hi All,
I have created a process wih multiple Human Activities, when I am trying to do the Output mapping of Human Task 1: I am not able to see any nodes/attributes in the process context on the Right side.
I am able to see the TaskOutput on the left pane.
Any clues?
TIA,
Arafat

Hi Arafat,
AFAIK you need to do a mapping from node to node and then map the elements within it individually (e.g. if the left structure would differ from the right one, but may also occur more than once). By right clicking onto the node and dragging it to the right side you can open the context menu which offers some handy operations (like "map automatically").
Hope that helps,
Martin

HT4623 in the process of updating to ioS6, how do i respond when the screen says choose a network?

in the process of updating iphone5 to ioS6, how do I respond when the screen says choose a network?

Your device is in recovery mode. Connect the device to iTunes and the computer and follow the instructions in this support document. http://support.apple.com/kb/HT1808

Process Context Updating

Similar Messages

Maybe you are looking for