Task's Process context doesn't get updated in parallel tasking

All,
I have a parallel task in my BPM process flow; the parallel task can have a max of 3 owners. The owners can either approve / reject the task. There are 3 boolean attributes in the process context that are used to store the decisions of these task owners.
When the process is initiated, these 3 attributes are set to true. So, there is no issue if all the 3 owners approve the task. The flow continues. If one of the owners reject first, followed by the other 2 owners approving the task, then the decisions are not captured. Hence, rejection flow is not triggered at all. But if the first 2 owners claiming the task approve and the last one rejects, the rejection flow is triggered.
Observation: When a owner approves / rejects, I am able to see the changed decision in NWA PROCESS context and in the output mapping of this task. But now, when the 2nd owner claims the task, the input mapping of this task doesnt have the updated value of the first owner's decision.
How to solve this issue?
Can someone please assist?
Many thanks,
Subathra M

Hi Subathra,
Is it the same webdynpro component that is assigend to the 3 parallel task? In that case you can use one attribute to capture the decision. if tthe first user selects approve and then the second user select reject the attribute will be updated to reject.
Regards,
Shilpa

Similar Messages

I am downloading the Creative Cloud desktop app on my Mac, and it starts to download but just stalls in the process and doesn't get any closer to finishing. Anyone have any suggestions. I've restarted my computer multiple times and restarted the download,

I am downloading the Creative Cloud desktop app on my Mac, and it starts to download but just stalls in the process and doesn't get any closer to finishing. Anyone have any suggestions. I've restarted my computer multiple times and restarted the download, but to no avail.

uninstall anything cc that's already installed, clean (Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6) and the reinstall, Adobe: Creative, marketing, and document management solutions

[svn:osmf:] 10991: Fix bug FM-119, where the playhead time doesn' t get updated until after the seek has completed.

Revision: 10991
Author:   [email protected]
Date:     2009-10-17 22:52:28 -0700 (Sat, 17 Oct 2009)
Log Message:
Fix bug FM-119, where the playhead time doesn't get updated until after the seek has completed. The bug is actually in Flash Player (FP-1705), and the workaround is to wait until NetStream.time gets updated before dispatching the seek completion event. This changelist also updates the unit tests and NetMocker to verify the fix.
Ticket Links:
    http://bugs.adobe.com/jira/browse/FM-119
    http://bugs.adobe.com/jira/browse/FP-1705
Modified Paths:
    osmf/trunk/framework/MediaFramework/org/osmf/net/NetStreamSeekableTrait.as
    osmf/trunk/framework/MediaFramework/org/osmf/traits/SeekableTrait.as
    osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/audio/TestAudioSeekableTrait.as
    osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/media/TestMediaPlayer.as
    osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/net/TestNetStreamSeekableTrait.as
    osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/traits/TestISeekable.as
    osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/traits/TestSeekableTrait.as
    osmf/trunk/libs/adobe/NetMocker/org/osmf/netmocker/MockNetStream.as
    osmf/trunk/libs/adobe/NetMockerTest/org/osmf/netmocker/TestMockNetStream.as

Revision: 10991
Author:   [email protected]
Date:     2009-10-17 22:52:28 -0700 (Sat, 17 Oct 2009)
Log Message:
Fix bug FM-119, where the playhead time doesn't get updated until after the seek has completed. The bug is actually in Flash Player (FP-1705), and the workaround is to wait until NetStream.time gets updated before dispatching the seek completion event. This changelist also updates the unit tests and NetMocker to verify the fix.
Ticket Links:
    http://bugs.adobe.com/jira/browse/FM-119
    http://bugs.adobe.com/jira/browse/FP-1705
Modified Paths:
    osmf/trunk/framework/MediaFramework/org/osmf/net/NetStreamSeekableTrait.as
    osmf/trunk/framework/MediaFramework/org/osmf/traits/SeekableTrait.as
    osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/audio/TestAudioSeekableTrait.as
    osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/media/TestMediaPlayer.as
    osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/net/TestNetStreamSeekableTrait.as
    osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/traits/TestISeekable.as
    osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/traits/TestSeekableTrait.as
    osmf/trunk/libs/adobe/NetMocker/org/osmf/netmocker/MockNetStream.as
    osmf/trunk/libs/adobe/NetMockerTest/org/osmf/netmocker/TestMockNetStream.as

HT6058 My ipad2 doesn't get updated instead all mails are also blocked! pls hellp

My ipad2 doesn't get updated instead all mails are also blocked! pls hellp

How are you trying to update? Over the air or connected to computer?
Mails blocked? What is happening when you try to get mail?
Are you seeing any error messages? A little more info would be nice.

OVM-Manager 2.2 doesn't gets updated properly.

hi,
i have ovm 2.2 setup consist of 4 servers in cluster.
whenever any of the servers get rebooted.The guest vm gets restarted on the next available resource server.
And now in the OVM-Manager side i see all the guest tht got restarted on the next available resource server shows the status as "UNKNOWN"
OVM-Manager doesn't gets updated properly.
currently in all my vm servers i have ovs-agent version "ovs-agent-2.3-27"
please suggest....

hi Avi,
thks for your reply..
i had upgraded ovs-agent form 2.3-27 to 2.3-31.
i noticted one thing which commom for both ovs-agent version
VIP doesn’t works properly using any of the ovs-agent version (2.3-27 nor 2.3-31)
Whenever VIP is enabled it leads to two major problems.
1)Disturbs the Server Pool HA. It works initially and then start showing unusual behavior .
2)OVM-Manager doesn’t gets updated.
Hence the whole setup is disturbed.
But when only Server Pool HA is enabled & NOT VIP everything works properly .i.e. HA across the Pool & even ovm-manager gets updated time to time.
Seems there is still some bug in the ovs-agent 2.3-31 also especially for VIP.

J1iex issue : J_1IEXCDTL GR qty doesn't get updated

Hi ,
we have a process like .... Capture excise invoice , MIGO 103 , MIGO 105 and Post excise invoice.
Facing one issue wherein system is not updated GR QTY in J_1IEXCDTL table.
The step I am following are
1) Capturing excise invoice ( Say number is 100 and excise invoice internal number 45)
2) Cancelled that excise invoice
3) Re-creating exscise invoice with same number ( 100 and excise invocie internal number 46)
4) Did MIGO 103
5) Perfomred MIGO 105
6) Now cancelled MIGO 105 ,
Issue 1 : It changed the status of both excise invoices 45 and 46 (internal numbers) to "IN PROCESS"
Actually the Status of 45 should be CANCELLED and 46 should be "IN PROCESS"
Issue 2 : Generally reversal of MIGO , updates the "Qty of Goods received" in J_1IEXCDTL but in this case Qty doesn't get chaned to 0 for Excise invoice 46.
Issue 3: Because of all these issues , we are not able to cancel Excise invoce 46. System is throwing an error
" REVERSE the material document before invoice cancellation"
have u guys encountered such types of issue ...
regards
Shrey

Hi,
After canceling the GR thru MIGO, please go to J1IEX & select cancel & save it.
It will help to change the status form in process to cancel in excise books.
Hope above will help.
shyam kogta

Groups field in Windows Active Directory doesn't get updated

Hello IDM Experts,
I am trying to append one more group to a few hundred users in AD. When I run the below code, I am not getting any error and at the same time the groups field in AD doesn't seem to get updated either. Any thoughts? Thanks!
<Activity id='1' name='CheckOut'>
<Action id='0' name='Check Out AD' application='com.waveset.session.WorkflowServices'>
    <Argument name='op' value='checkoutView' />
    <Argument name='type' value='User' />
    <Argument name='id' value='$(userId)' />
    <Argument name='authorized' value='true' />
    <Argument name='subject' value='Configurator' />
    <Argument name='Form' value='Empty Form'/>
    <Return from='view' to='userview' />
</Action>
<Action id='2' name='Change AD Values'>
    <expression>
      <block>
        <append name='userview.accounts[Sample Domain].groups'>
          <s>CN=grp_ext_owner,OU=Task Groups,OU=Groups,DC=sample,DC=com</s>
        </append>
        <ref>userview.accounts[Sample Domain].groups</ref>
      </block>
    </expression>
</Action>
<Action id='3' name='Check In AD' application='com.waveset.session.WorkflowServices'>
    <Argument name='op' value='checkinView' />
    <Argument name='view' value='$(userview)' />
    <Argument name='authorized' value='true' />
    <Argument name='subject' value='Configurator' />
</Action>
<Transition to='end' />
</Activity>

Some ideas...
1) Do you have a mapping of the groups attribute in your Sample Domain resource adapter? One element should read similar to:
<AccountAttributeType id='10' name='groups' syntax='string' mapName='groups' mapType='string'/>2) Is the groups attribute already a list? If not (e.g. no groups yet assigned), the append statement might not actually do anything.
3) Your statement below the append doesn't actually do anything. Well, it should not break anything, but who knows.

Firefox+Flash: Some flash applets' content doesn't get updated

Hello community,
I stumbled upon a very strange problem with Firefox and Flash. Some flash applets (example: http://www.kenken.com/game) show only a plain white rectangle. For a long time I thought that it is a problem with Flashblock and/or NoScript. Today, however, I tried to get rid of the problem and made following observations:
1. The problem persists in safe mode (with deactivated extensions).
2. The problem persists after disabling hardware acceleration in the Firefox settings.
3. The problem does NOT occur in Chromium&Pepper Flash. But I'd like to stick to Firefox for many reasons.
4. The problem does NOT occur on my laptop running Manjaro (however, the setups are not really comparable).
5. Initially I thought that the flash applets aren't initialized at all, however, now I observed that if I switch to a different tab and then back to the tab with the flash applet, it gets updated. I can also interact with the applet, however, the changes are only visible after I do the tab switching.
Any help or hint how to find the cause of the problem is greatly appreciated!
Thanks in advance,
PhotonX

A new finding: I tried to install an older version of Firefox and downloaded a binary from https://ftp.mozilla.org/pub/mozilla.org … /releases/. The older binary worked so I tried newer ones and finally arrived at the very same version as the one installed through the package management. The result is: The 33.0.2 binary downloaded from Mozilla works, the 33.0.2 installed through the package management doesn't! All extensions installed on my machine are available in the downloaded binary, so I assume that it knows about ~/.mozilla. What could be the cause of the problem then? Will try to start Firefox with a completely clean home folder (new user) and report back.
edit: Narrowed down the list of problematic files to this:
$ ls -l /home/photon/.mozilla/firefox/sw0n83fl.default/
insgesamt 94852
-rw------- 1 photon users 94222 31. Okt 11:22 prefs.js
-rw------- 1 photon users 141109 31. Okt 11:17 search.json
-rw------- 1 photon users 734 31. Okt 11:06 search-metadata.json
-rw-r--r-- 1 photon users 65536 19. Jun 2012 search.sqlite
-rw------- 1 photon users 16384 30. Apr 2011 secmod.db
-rw------- 1 photon users 288 31. Okt 11:22 sessionCheckpoints.json
-rw------- 1 photon users 2480 31. Okt 11:22 sessionstore.js
-rw-r--r-- 1 photon users 393216 4. Sep 08:49 signons.sqlite
-rw------- 1 photon users 25 15. Mai 2013 times.json
-rw-r--r-- 1 photon users 62914560 21. Nov 2012 urlclassifier3.sqlite
-rw------- 1 photon users 154 31. Okt 10:26 urlclassifierkey3.txt
-rw-r--r-- 1 photon users 1622446 21. Nov 2012 urlclassifier.pset
-rw-r--r-- 1 photon users 31850496 31. Okt 11:22 webappsstore.sqlite
edit: The problematic file is prefs.js.
Last edited by PhotonX (2014-10-31 10:29:25)

ScrollPane: thumb doesn't get updated after contents of scrollpane change

Hi,
I some content in a scrollpane. The horizontal scrollbar(thumb) is showing because the content is to big to fit horizontally.
The problem is if the content changes, i.e. gets smaller for example, the scrollbars don't get updated. Only after touching them with the mouse do they shrink/grow accordingly.
Is this a bug (it looks like it)? Is there a workaround?
Thanks in advance,

Sounds like a bug. Can you file the issue in JIRA?
Thanks!
Richard

Windows10 tech preview build 10041 doesn't get updated for some reason

is there a way to force an update? I believe there were a couple of updates , but for some reason my build didn't get updated
tx,
D

Hi,
At least, we have preview build 10049 now, if you want to experience it, then you can change the install speed to "fast" in Settings\Update&Recovery\Windows Update\Advanced Options. If you don't want to experience it, then leave the setting
in "Slow". If you've already set to fast and didn't get any updates, then pleaes check the following registry:
Open regedit.exe
Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability
Ensure the following values exist:
{value name}, {value type}, {value data}
BranchName, REG_SZ, fbl_impressive
ThresholdOptedin, REG_DWORD, 1
ThresholdRiskLevel, REG_SZ, low
Delete all other values
Open Settings
> Update & recovery > Windows Update
Tap or click Check
for updates
System also has a built-in troubleshooter, launch control panel\All control panel items\Troubleshooting\System and Security\Windows Update, run this troubleshooter.
Regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Config.xml doesn't get updated in WLW

Hi,
When I try to update the server port number in the Weblogic Workshop console (via
Tools -> Preferences -> Path -> Port), I was unsuccessful in achieving that. I
changed port number from 7001 to 7010. This doesn't modify the config.xml. When
I start the samples server, it tries to start the server in the same port (i.e.,
7001) causing bind exception. Is this something to do with configuration file
not being updated. Am I getting wrong somewhere?
Any thoughts on this?
Thanks,
Arul

Hi Arulazi,
Adding to Michael Wooten's post, the change you make (via the Tools ->
Preferences -> Path -> Port) only changes the port number to which Workshop
connects to. This will be used when you want the same IDE to connect to
different workshop enabled WebLogic Servers.
This change will not be reflected in the config.xml file.
The information will be updated in the .workshop file found in the
C:\Documents and Settings\username directory.
If you want to change the listen port for the server you will have to edit
it via the server console at http://localhost:7001/console
Hope this helps.
Thanks
Raj Alagumalai
WebLogic Workshop Support
,"Michael Wooten" <[email protected]> wrote in message
news:[email protected]..
>
Hi Arulazi,
I think this is just you assuming that changing the information in thatdialog
box, effects the config.xml of the WebLogic Server instance Workshop itsusing
I don't think it does anything to the config.xml. It only tells Workshopwhich
WebLogic Server instance you want it to use.
Again, unless you've actually seen some documentation that states thatperforming
the operation you mentioned changes the config.xml, I think the behavioryou are
currently getting is the way it is supposed to be :-)
Regards,
Mike Wooten
"Arulazi D" <[email protected]> wrote:
Hi,
When I try to update the server port number in the Weblogic Workshop
console (via
Tools -> Preferences -> Path -> Port), I was unsuccessful in achieving
that. I
changed port number from 7001 to 7010. This doesn't modify the
config.xml.
When
I start the samples server, it tries to start the server in the same
port (i.e.,
7001) causing bind exception. Is this something to do with configuration
file
not being updated. Am I getting wrong somewhere?
Any thoughts on this?
Thanks,
Arul

System.Data.Entity.DbSet entity doesn't get updated with sequence nextval

I am using EF6 with oracle 12c client. I need dynamic entity object to be added in System.Data.Entity.DbSet
System.Data.Entity.DbSet entity = Request.Context.Set(obj.GetType());
Object Updated = entity.Add(obj);
Result_SaveChanges = Request.Context.SaveChanges();
int sequence = Request.Context.Database.SqlQuery<int>("SELECT " + SeqName + ".currval FROM DUAL").FirstOrDefault();
Save Changes doesn't update the object's key but fetching the sequence give me the updated value. I need System.Data.Entity.DbSet entity to be properly updated so that i can insert child entities too through their navigation properties.

Hello Sidra,
Since you are working with EF based on Oracle database provider, for this, i suggest that you could post it to the Oracle related forum:
https://community.oracle.com/welcome
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Finder 'item info' doesn't get updated

10.4.6, on my PowerBook 1.5Ghz 15"
I have 'show item info' selected in Desktop View Options.
My hard drive icon has size and free space displayed, but didn't update (weeks ago) when I deleted 10G of files. If I select the icon, and do 'Get Info', it shows correct sizes.
Anybody seen this? Know the solution?
It has always worked correctly on my PowerMac Quad G5, on every os version I've used so far.

-

Site doesn't get updated

I've created a site with iWeb, embedded a song and clicked on the Publish button. The site was published, but I forgot to make the song loop. So I went to iWeb and checked the loop box in the Inspector (quicktime tab). I saved the change and hit Publish. However, when I visit the site the song doesn't loop.
Am I missing something?
TIA

Dan:
Try using the File->Publish All to MobileMe option. That often will get all changes uploaded.
As a side note if you've set the audio file to play automatically you might consider setting the volume low before publishing as seen here so it doesn't blow out some unsuspecting visitor who might have their sound turned up high for some other reason. Then the visitor can up the volume as they see fit.
OT

Hard disc space doesn't get updated

Hi!
I have a Macbook 2Ghz Core Duo. 60 GB HD. well, now I got about 7,5 GB free. I I was planing of cleaning up my HD. Remove pictures, duplicates and not used software.
The problem is that when I trash something, and empty the trash. The HD info lower the free space instead of freeing. I was as low as 100mb so I rebootet my macbook and it shows 15GB free.
What can the problem be? And still after taht reboot, it still got that problem.
(btw. not using firevault)
MacBook Mac OS X (10.4.8) 2 Ghz Intel Core Duo, 1 Gb RAM

The harddive icon on the desktop doesn't seem to be updating at all times for some reason. A finder window in the same volume shows the right free space in the bottom of the window.
Martin

Task's Process context doesn't get updated in parallel tasking

Similar Messages

Maybe you are looking for