Process in a process

Dears,
I am a new commer to BPEL. I would very much like to find a reference on how to use a process as a partnerlink(similar to the way services are used). Can anyone shade a light on this issue?
Thanks.
M.OLI

Each BPEL Process is autmatically published in the WSIL directory so if you create a new partnerlink, you can actually just browse all existing processes that run on the server.
So if you have deployed a process called XYZ, you can just create a partnerlink in any other process pointing to process XYZ.
Sandor

Similar Messages

Whats the difference between PROCESS INTEGRATION & INTEGARTION PROCESS

hey All
I was just going through one of the tutorials provided in
http://www.help.sap.com , its related to Process Integartion Scenario and i also came across one more tutorial related to Integration Process.
For * Process Integration* it was there like *A Process Integration scenario is a design object of the Enterprise Services Builder, is uniquely identified by a name and a namespace, and is subject to versioning.*
url : http://help.sap.com/saphelp_nwpi71/helpdata/en/ec/21ee117a909f44a8b69794b9ed6221/content.htm
for Integration Process it was +*An integration process is an executable cross-system process for processing messages. In an integration process you define all the process steps to be executed and the parameters relevant for controlling the process.
You apply integration processes when you want to define, control, and monitor complex business processes that extend across enterprise and application boundaries. The design and processing of integration processes is also known as cross-component Business Process Management (cross-component BPM, ccBPM), or service orchestration.
+*
url :
http://help.sap.com/saphelp_nwpi71/helpdata/en/3c/831620a4f1044dba38b370f77835cc/content.htm
So my question is , whether both are same or different , as far my view it different , i think integration processes is one of term inside Process integration as told in URL , please guys see to this

Hi Abhishek,
Integration process (IP) refers to BPM. you will find the IP in the ccBPM, Business Process Management.
An integration process is an executable, cross-system process for processing messages.
Process Integration(PI), Now Xi is known as Process Integration PI is a term that is used to in the Integration Broker of the NetWeaver Architecture.
View the below link you will get the related more information.
http://help.sap.com/saphelp_nw04/helpdata/en/2e/bf37423cf7ab04e10000000a1550b0/frameset.htm
hope you got your solution.
Regards
Anil
Edited by: Venkat Anil Gannavarapu on Apr 9, 2008 1:13 PM

How to delete Init flag in a process chain, before processing the init

Hi,
At the end of the week i need to re-execute the init request from ODS1 to ODS2.
Therefore, i have to delete the init flag first and the requests in the CUBE1, everything automatically in the process chain.
The schedule must be as follow :
1. Delete init flag on ODS1
2. Delete all request from ODS1 in the CUBE1
3. Load an regular INIT request from ODS1 to CUBE1.
Notes :
I cannont clear all the CUBE1 content, as i have other datasource than ODS1.
CUBE1 is the only one data-target of ODS1.
Any suggestion, as there is no process in the process chain to "Delete Init Flag".
Best regards,
Ludovic

Hi
Ad.1
start code----
DATA: v_count TYPE i,
p_dsourc LIKE roosprmsc-oltpsource,
p_rlogsy LIKE roosprmsc-rlogsys.
p_dsourc = 'your source'. *"8E2_ODS1"
p_rlogsy = 'your system'. *"BP100"
SELECT COUNT(*) FROM rssdlinit INTO v_count
WHERE oltpsource = p_dsourc
AND logsys = p_rlogsy.
IF sy-subrc NE 0. "MesgTyp E end the program abnormally
MESSAGE e508(db6) WITH 'x' 'x' 'in DSource and/or LogSys'.
EXIT.
ENDIF.
Call delete function
CALL FUNCTION 'RSS1_QUEUE_DELETED_IN_OLTP'
EXPORTING
i_oltpsource = p_dsourc "OLTP-Source
i_logsys = p_rlogsy "LogSys (Myself or Remote)
EXCEPTIONS
failed = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE e508(db6) WITH 'x' 'x' '===> No sucess <==='.
ENDIF.
---end code
Ad.2
See RSA1-> Infosources -> select your Infopackage -> Change ->
Data targets -> Automatic Loading of Similar.. -> Delete existing Request
Ad. 3
Create Infopackage with init
Regards
PWnuk

One work process can only process one user request at a time?

Hi,
How to configure the how many work processes for 80 concurrent users login daily.One work process can only process one user request at a time? Does this mean a login user has a dedicated work process servicing him. Or many login users interleave a work process's service? ,clarify the same.
Thanku

There are different types of work processes and the number needed depends on the number of transactions that will take place in the system. We are running 80 concurrent users with 15 dialog work processes. Please see the link below for an explanation:
http://help.sap.com/saphelp_46c/helpdata/en/fc/eb2e8a358411d1829f0000e829fbfe/content.htm

How to print process instruction in process order.

Hi dudes,
,y client is not having Process management interface, but they want to maintain process instruction for phases in recipe and want to take print of process instructions in process order after release process order.
Please explain the path for printing process instructions copied into process order.
if some one assign PIs to phase in recipe, will control recipes be created after release of process order.
Regards
Daniel

The easiest way to do what you want is to actually create the PI sheet and then print it off from the view PI sheet transaction (CO60). This is then all standard functionality.
to do this you will need to set the configuration to create the control recipe when the process order is released and send it to a recipe destination.
Regards
Laurence

How to reset an failed asynchron abap-process in a process-chain?

Hi specialists,
I've got a process-chain which triggers (as one of its steps) an abap-program.
The program should run asychroniously, so the process-chain waits until the programm reports its ending.
When the abap-program fails/crashes/dumps, then the endings is never reported and the process-chain gets stuck.
If I try to re-run that process-chain, it fails again with the message "Variant XYZ still executing from previous run".
What I already found so far is the following note:
The process chain management will not know if your program terminates!
Thus if you re-start the chain, this will also terminate, because the old run would not have finished yet. To avoid this, you need to manually set the process in the chain log view in the process monitor to terminate before you start again.
My problem: I cannot find any possibility to set the process to "terminate" in the chain's log view.
Could you please gimme a hint where I can find that option?
Best regards,
Marco

Hi,
You can remove the process chain from scheduling before staring the process chain again.
Also can edit the entries in RSPROCESSLOG table before running the process chain.
Alternatively you can create a custom ABAP process type which handles the success as well as fail cases.
Refer : [How To- Trigger subsequent processes in a Process Chain based on the Success or Failure of ABAP program|/people/balaji.venugopal/blog/2009/04/07/how-to-trigger-subsequent-processes-in-a-process-chain-based-on-the-success-or-failure-of-abap-program]
Hope this helps,
Regards,
anil

Using CREATE PROCESS and START PROCESS in a JSP

Hi,
I have built a simple JSP page. I want to call my workflow program from this page.
How should I use the CREATE PROCESS() AND START PROCESS() inside the JSP page?
Also I want to get the value entered in the text field (which will be a hidden field) to be passed to the ITEM_ATTRIBUTE, which I have defined in my program. How can this be achieved?
Please give me the syntax for this.
Please find below the JSP page
=========================================================
<%@page import= "java.util.Date" %>
<script language="javascript" src="ibeCButton.js"> </script>
<html>
<head>
<title>First Page</title>
</head>
<body>
<H3>Today is:
<%= new java.util.Date() %>
<INPUT TYPE="text" NAME="CART_ID">
<INPUT TYPE="submit" onclick = >
</H3>
</body>
</html>
==========================================================
To use LAUNCHPROCESS in JSP, the following is the syntax.
public static boolean launchProcess
(WFContext wCtx,
String itemType,
String itemKey,
String process,
String userKey,
String owner)
Should WFContext have the connection information of the DB.
If I pass only the WFContext and itemType attributes are they enough? Please let me know.
Thanks

There are two options.
1. Good one.
Include wf*.jar files in your system CLASSPATH. Use oracle.apps.fnd.wf.engine.WFEngineAPI class to access engine APIs. You would need to pass WFContext for which you need WFDB.
You basically created WFDB with username, password and connect string. Pass it to WFContext and use it for all Workflow Engine APIs.
2. OK one.
You can get JDBC connection using the default mechanism that your custom Java and JSP code could be using. Call the PLSQL procedures WF_ENGINE.CreateProcess and WF_ENGINE.LaunchProcess over JDBC.
Anyways option 1 makes life easier.

How To use process type in Process Chain

Hi,
I am new in Procc. chain and now seeking documentation of The process type in Process chain that's describing how and when to use it.
Can you please help ?
thanks
supriatna
Message was edited by: BW - xltrs

Hello Supriatna,
Please have a look on SAP help portal to understand complete work flow of BW process chain.
http://help.sap.com/saphelp_nw04/helpdata/en/86/6ff03b166c8d66e10000000a11402f/frameset.htm
Regards,
~Ketan

What are the best ways (for best performance) in MII to process the incoming process messages from shop floor systems to SAP ECC 6.0 and vice versa?

Hi All,
Can you please suggest to choose the best ways (for best performance) in MII (12.2 on NW 7.3), to process the incoming process messages from shop floor systems to SAP ECC 6.0 and vice versa?
Thanks

Hi Surya,
Best practices for flow of data from ECC --> SAP MII --> Shop floor & Vice verse:
1. Send ECC data through IDOC's/RFC's as messages to SAP MII message listener and BSL transaction process data and update directly on shop floor database as if you configured in Data services or later send those data by web service to shop floor system (i.e. depends on Shop floor machines).
From Shop floor:
shop floor --> SAP MII --> ECC
1. Use either Web service or fetch data from DB and pass data to BAPI's for sending to ECC through BLS transaction.
Regards,
Praveen Reddy

Process terminates in process chain

Hi ,
I do have 7 Meta Chains running under one of the Process parallely in BI 7.0. Unfortunately once in a while some of the process are terminating. Its start at the same time as all other of the process, but it does not executes the chain and turns red.
I don't even get a Process Monitor on that particular process nor a error message. i do can find the two clock symbols on that particular chain the LAST_SAVED & LAST_ACTIVATED. But the process chain does not run future.
If i run that particular process chain manually again it works properly.
Can you help me out, to run the process automatically .
Thanks in advance
Raju

Hi Akula,
When you Schedule a Process chain the Process will be ASSIGNED TO A WORKPROCESS OF aN Application server.
If there is no workprocess is avaliable in the Application server. the Process will be Terminated.
As you are scheduling Process chains there may be a Problem with Avaliability of work Processes.Check in sm50 for the no of application servers avaliable and check whether the work Processes are avaliable for each Application servers if you have more than one.
Try to avoid scheduling the Chains at the sametime.
hope it helps.
Thanks,
-Vijay

Process dependencies in process chain

Hi All,
in one of my process chain i have at the end :
delte index -> Load DTP -> Create index -> Compress cube ->generate db stats
but system is showing this warning
A type "Construct Database Statistics" process cannot follow process "Compression of the InfoCube"
and in table RSPCTYPESDEP i an entry stating that :
generate db stats after a compression of cube "makes no sense but not completely wrong".
can you explain why generate db stats after compress make no sense ?
Regards.

Hi Anns,
It is always recommended to keep the create DB stats before compression.The advantage of the DB stats is to improve the query performance as well as loading performance.
check the below links for more information
/thread/2026714 [original link is broken]
http://help.sap.com/saphelp_nw04/helpdata/en/d5/e80d3dbd82f72ce10000000a114084/content.htm
Regards,
Venkatesh

Process sequesnce in process chain

Hi,
In a process chain which process should come first re-create cube index or delete overlapping request and WHY.
Thanks,
sam

Hi,
have a look at the below link..
http://help.sap.com/saphelp_nw04/helpdata/en/d5/e80d3dbd82f72ce10000000a114084/frameset.htm
Usually the process will be start - delete index - load data to cube - generate index.

"Unfortunately the process com.google.process.gapps has stopped" caused by Trusted Place ?

Error Description:
"The process com.google.process.gapps has stopped" error was popping up in one second after the previous one was "OK"-ed, endless.
Background:
Some minutes earlier Trusted Agents was set to ON, thereafter Trusted Places "HOME,Home" was defined.
Error removed:
- The Google Play services version 7.0.99 (1809214-436) was "uninstall updates" -ed to (default) version 6.5.99(1642632-436).
- Thereafter "Trusted Agents" was switched off.
First usages do not show the error, I will update the thread next time it pops up again.
Device and Versions:
Xperia Z3 Compact (D5803),
Android 5.0.2., Build: 23.1.A.0.690,
Kernel: 3.4.0-perf-g72984dd, BuildUser@BuildHost #1, Fri Feb 27 18:06:32 2015
Customization: 1289-4696 R4C
Google Play Build version: 5.3.6.
Questions:
- Should I update of Google Play services now ? /lots of notifications coming ...
- What can I expect, when is it possible to use Trusteds on that phone ?
- What can I expect with the other Z3C in our family, which uses the Trusted Place w/o error ?
(Or should I be just plain happy to use the feature at least on one other phone at the moment ? ;-)
- Is there an official update 5.x (x>0) planned for Xperias ?

Try performing a system repair using PC Companion as this will often fix issues - This will factory reset your phone and erase all data so best to backup before you begin
Switch off your phone and unplug from Pc (Hold volume up and power for around 10 seconds)
Start PC Companion and select Support zone then Update my phone/tablet then in Blue Repair my phone/tablet and follow the on screen instructions - When prompted connect your phone still switched off holding volume down or back button - This should start the repair or reformat process
If you are using Windows 8/8.1 or a 64bit operating system then adjust the settings for PC Companion and run in compatibility mode and chose Windows 7 or XP
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled. Richard P. Feynman

Canceling a Process Instance in Process Workspace

Hi
I need to provide Admin User a functionality to Cancel a process Instance.
As per the section 4.5 of User's Guide for Oracle Business Process Management 11g Release1 (11.1.1.6.1) E 15175-07, the Process Owner can Cancel the Process Instance from Process Tracking page.
I tried by mapping the Admin User with ProcessOwner role, but it didn't work. I can see only Alter Flow in the Actions tab.
Did any one else came across this issue.
Please let me know if I am missing some thing in here.
Thanks

Is the password oc4jadmin's password? Today, I've gotten ServerAuthFactory to work with oc4jadmin's credentials.
if this is true... in an environment where me as a developer doesn't have the password for oc4jadmin, how can I use this API? Frankly, my system administrator will not give it to me. I had to turn my head away while he typed it into my code, just to test this.
Is there a list of EJB's I need to get access to for another account other than oc4jadmin?
Any help would be greatly appreciated.
Dan

Process Types in Process Chains - Loading - Repeatable/repairable

Hi,
I know SAP recommends that we do not change the properties of the Process Types for Process Chains. I want to know if any one has ever changed the property of "LOADING" process type to "repeatable" or "repairable". We are keen to change this attribute of "LOADING" process to repeatable. Any experiences, good or bad, would be highly useful to us to take a decision and would be highly appreciated.
regards
Uday

Hi Simon,
So far, I have not come across any documents that explain the difference between the two options. But, I believe the 'repairable" would start from where it has stopped in the program calles, while "repeatable" will restart the current job (not the whole process chain) from the start. Please remember to post it here, if you ever come across any documentation on these options.
Uday

Process flow in Process industry

Hi PP Gurus,
I want to have an idea about flow of process order in process industry with the details how the cost are captured per day if the process order continues for many days.
Pl guide me in the process
Thanks in advance
Shanmugam Balamurugan

Important Things Involved:
O10C --- Control Recepie Destination (Clubbing of recurring PICs)
O12C --- Process Instruction Category (PICs) -- Clubbing of Process Instruction Chars to be displayed
as per requirement on PI Sheet.
O13C --- Process Message Category --- After we have recorded the Enteries in PI sheet, If we need to update some ABAP/ Z table or We need to Trigger some program with those values then mapping for that is done here.
BOM:CS01
Resource:CRC1
Master Receipe:C201
Production Version:C223
PI Characteristics:Ct04/O25C
PP Process Flow:Cr01>Co53>co60/co55/co64/co67-->CO57
SOP:MC84>MC81>mc76>mc75>md63
Demand Management: MD61>MD02>MD04-->Cor1
MRP Run: MD02,MD04

Process in a process

Similar Messages

Maybe you are looking for