ProConnect Integrated KVM 2-Port Switch

Anyone using the ProConnect Integrated KVM 2-Port Switch with a mouse that is using a Usb adapter? I have had the ProConnect® Integrated KVM 2-Port Switch over 5 years using it on and off this was before mice came with usb attachments. I have recently been trying to use a Microsoft Basic Optical mouse with a Usb adapter connected to the ProConnect® Integrated KVM 2-Port Switch attached with and the computers refuse to boot it did not do this when I was using a PS2 mouse.
Please post what mouse you are using with your ProConnect Integrated KVM 2-Port Switch Usb or PS2.
Message Edited by MaxEnergy on 08-09-2007 01:42 PM
Message Edited by MaxEnergy on 08-09-2007 01:43 PM
Message Edited by MaxEnergy on 08-09-2007 01:51 PM

Hi MaxEnergy,
Can you say what make/model of PC you are using? I have this same problem (not booting) with my ThinkPad - and I've seen mention of it on other websites - also in relation to ThinkPads. In my case it has nothing to do with the USB-PS/2 convertor, it's the KVM switch being incompatible with the ThinkPad, but I can't find any answers anywhere....
I've used my KVM switch with a USB-PS/2 convertor for years without any issues.
Message Edited by jimbeam on 08-27-2007 01:18 PM

Similar Messages

Replacing high density port switch/blade strategy

Hello,
I'm looking for strategies in replacing 48 port blades/switches while minimizing downtime. Our management wants to know how long it would take to replace a switch and re-cable it. So I'm trying to find some best practices on replacing switches/blades and how to maintain cable to port integrity when moving between switches/blades. The only thing I've really found comes from data center infrastructure, where they stress the importance of labelling cables.
I was wondering if anyone else had other strategies they use when replacing high density port switches/blades
Thanks in advance

patrickpaez wrote: Leo,Thanks for the response. What about places where your rack or chasis is full and you have to remove the exsisting chasis or blade inorder to add the replacement equipement?
Label, Label, Label.
I can't stress it enough, especially if you're trying to do a "mirror" replacement and have everything working exactly the same as it was before. Don't rely on memory, don't rely on out-of-date documentation - label every cable
If you're talking physical switches, then configure them FIRST to match your existing configuration (VLAN's, SVI's, Trunks etc etc), then label *every* cable plugged into your existing switch, pull the old one out, mount the new one, then put your cables back into place based on the labels.
If you're talking blades, the process is about the same except you *shouldn't* have to worry about configuring first - if you're doing a slot-for-slot replacement, the port designations should remain the same, and your existing config should just take effect on reboot.
If it's an additional module in an empty slot, just plug the module in, duplicate the configuration from the existing module, and move your cables one-by-one to matching ports on the new blade.
Cheers
Trap for new players in blade/modular environments - make DAMN sure the IOS version you're running actually supports the module you're installing - or you're going to end up in a mess!

Parallel port switcher

Hi all,
I have attached a parallel port switcher that I downloaded but I keep getting the error "manager call not supported" as attached.
How can I run/ use the attached vi? I have Labview 7 and Labview 8.5 installed, in my Windows XP and Windows 2000.
Attachments:
untitled.JPG ‏11 KB
parallelportswitcher7.vi ‏112 KB

Hi all,
I've soldered 3 LEDs to pin 2, pin 6 and pin 9 and pin 25 to ground. I need to control the on off of the 3 pins through Labview. I've modified an example I found in Labview as attached but there are things that I don't understand:
1. Why is it when I clicked both LED 18 and 22 on Labview, all my 3 LED on breadboard (connectted to pin 2,6,9) turned on?
2. Why is the "register write value" in Labview consists of 32 LEDs? How can I change it to may be 8 or 3 LED?
3. If I change the "register write value" to constant, what value or number should I insert to on/ off my LED?
Please advice.
Kim
Attachments:
Untitled 3.vi ‏25 KB

ECC6 integrated ITS default port 8000 changed to http port 80

We want the ECC6 integrated ITS default port 8000 changed to http port 80. The integrated ITS Cat2 transaction is currently working on http port 8000. I changed the icm/server_port_0(Instance Profile) and the ICM Monitor Active Services(smicm services) to use port 80. Cat2 transaction fails http fails after system restart. I have reverted back to 8000 and all is now working again. Is there more work that needs to be carried out or is port 80 is supported?

is your application server in domain?
if its in domain and when used sapides.<xxxx>.com if you get DNS not found, may be browser is looking up internet, put your domain in the exception in tools->internet options->connection->lan settings->proxy->advanced
"<i>This server does not support HTTPS! It is therefore potentially unsafe to send your password</i>" i just a warning message and you should still be able to log on.
(if you want to hide this info let me know)
<i>and i never could logon into R/3 !!</i>
do you also see a message that SSO2 is not configured? if yes follow the steps explained in OSS note no.517860
when you say never could logon what happens,
a) the field for user id pwd disabled? - click on the basic authentication button to get the log on pop up
b) error messages?
Regards
Raja

Cannot connect 4-port switch to hub3

Hi, recently had infinity installed and we are absolutely impressed with it and speeds in excess of 75down which is fantastic!
So the setup we have is the router downstairs, and an ethernet going from that to the 4-port switch which was all set up for us by the engineer.
What I wanted to do however, was to plug another 4-port switch (a white 'PEAK' branded wifi switch) into one of the 4 ports of the hub3 in order to increase the capacity up to 7 ethernet sockets.
This setup worked fine when we was with sky over on the old DSL line where the 4-port swtich simply went into skys netgear switch and worked automatic.
However, since switching to bt infinity, for whatever reason, this white switch will not work with BT's hub3. By plugging a computer into the white switch, i can access the actual routers setup page by typing in 192.168.1.254, and can access all the settings. The following settings come up...
INTERNET: Connection Method - DHCP
Internet IP Address: 192.168.1.67
LAN: IP Address 192.168.1.254
LAN: Network Mask 255.255.255.0
LAN DHCP Server: ON
But like I say, the switch, which has got a cable coming from one of the HUB3's 4 ports into my old white PEAK routers INTERNET port, will not allow my old switch to access the internet.
So im really confused. Why will my old switch not work on the BT Infinity HUB3?

Thanks for both your replies. I read them earlier in the day, and been trying a few things out...
1st, I tried plugging the hub3 into lan4 on the peak switch, and the other 2 (sky and roku), along with my laptop for testing purposes into 1, 2 and 3, and all worked great!
Well... all wasnt so great, the connection was sporadic and intermittent, ping was low, and throughput was fast, but it was on and off. A speedtest.net would stall, web links sometimes took 2 or 3 clicks, and so on.
So what have I learnt? Well, the fact that it has an internet port (which I was wrongly trying to use before), means that it isnt a basic switch.
So today, I went and bought http://www.tp-link.dk/products/details/?model=TL-SF1005D. Plugged that in the same way, and everything works perfect!
So now, I have the router (downstairs), plugged into the hub3 (upstairs via existing ethernet run throuth the stairs), 3 ports plugged into 2 pc's and 1 youview box, the 4th into a powerline socket upstairs,, with the other powerline socket plugged in downstairs behind the TV, connecting to the tp-link switch socket 5, with the sky+HD and Roku XL plugged into 1 and 2 on the switch respectively, and after testing I now everything running lightening fast with HD on demand, and the world is good
So thanks for both your advice, i learnt a bit today.

Faulty but refused a port switch as they are alloc...

First off someone at BT/Openreach really does need to address what is a truly broken issue management and escallation process at Openreach. It doesn't take much effort to provide feedback and information to Customers yet Openreach appear to be completely incapable of this.
So, 23rd Aug my infinity that has been working for months goes from 22Mbps down/5Mbps up to 10Kbps down/7.5Mbps up - yes, 10k!
I normally use a draytek 2750n so I swapped that out and put back the standard Openreach modem and HH3 that BT supply - no change in speeds.
So I call BT, go through all the normal off and ons until an engineer visit to the house is arranged for the following weds. The engineer spends a few hours trying to sort it out, confirms that all is fine between the house and the cabinet but i need a port switch - Openreach refuse this as the ports are assigned for new installs. I'm supposed to get a call back to arrange this - no call.
I call BT and they say an engineer will visit the cabinet/exchange on Monday 3rd (this week). I get home in the evening to find that nothing has changed but do have a message on the answerphone from the Engineer informing me that he has sorted a few things out and given a few days everything will be back to normal - that does happen right?!?
I'm straight on the phone to BT who arrange an engineer who will sort everything out today and call me to confirm so that I can check. I check at 5pm today - no change. I ring BT - Openreach cancelled the Engineer because the engineer from Monday closed his call - after I'd rung on Monday and booked for today.
During this call I was told that the Engineer from Monday 3rd had also requested a port switch and been refused, no spare ports ( again I expect they are reserved for new Customers). So despite the message I'd received he knew that a port switch was required. I'm told that an engineer is now coming onFriday and will check everything is working. My obvious question is 'are there now ports available for existing customers'. The response was that the engineer would find out on Friday and book an Engineer for another date if not.
Now as a customer who has a contract with BT I expect faults to be fixed in a timely manner without constant chasing by myself. I do not expect BT to refuse to fix my fault becuase all spare ports are allocated for new customers - surely a breach of contract.
I've now been without Infinity for 2 weeks and I have little faith that Openreach will resolve it next time or put in place the required Engineers to resolve the problem.
Anyone any ideas how I can get a resolution to the port switch I require and ensure that Openreach do what needs to be done?

So another engineer visit to fix the problem. First of all he tries to get out of switching the port but we stand firm and tell him that two other engineers have already identified the issue. Off he goes to do a lift and switch ?
He comesback, plugs in his magic box and tells my Wife that it says we should get 25mb - I'm guessing that this device just reads the profile rather than testing the line as when he used http://www.speedtest.bbmax.co.uk/ to test the speed on our laptop rather than any of the BT sites and showed my Wife that he had managed to get 5Mbps and not to worry as this would increase back over 20Mbps overnight. He did mention that
I get home this evening to discover that we are getting 10k downstream, 4.5m up. How is this possible - well the only way I can think is that the ports have been switched back again. Even if thats not the case why would the speed decrease from what he tested to such a degree and why would he expect the speed to increase by 400%+ overnight?
So, 15 days after reporting the fault, 3 engineers, 3 hours on the phone to a call centre that isnt even the company responsible for the problem and the only thing that has been acheived is a slight reduction in upstream speed. Unreal
Oh, and the call I was promised by a manager in India that would be between 7 pm and 8 tonight to confirm that everything was fixed - i guess it was too much to expect that to happen.
Here's hoping that the Mods are able to help as I don't know what else to do.

I'm using windows 7, trying to download pictures from my canon 5d mark 2, but when I click import, the camera does not appear. I've tried changing USB ports, switching the camera on and off, trying a different USB cord, tried a different camera, but nothi

I'm using windows 7, trying to download pictures from my canon 5d mark 2, but when I click import, the camera does not appear. I've tried changing USB ports, switching the camera on and off, trying a different USB cord, tried a different camera, but nothing. Please help! This problem only started a few days ago on lightroom 3.6, upgraded to 5.5, but still not working. Thanks.

Can you see the Canon EOS camera and image files using Windows Explorer? If not disconnect the camera, close all applications' shutdown Windows, and TURN OFF the power to your system and ALL connected devices. Disconnect all phones, iPads, and any other USB devices and restart your system.
Retry Windows Explorer and see if your camera is showing. If so try LR import again.

Using 79xx Phone PC access port to connect a Netgear 5 port switch

Cisco documentation indicates that on 79xx phones you can "Use the PC access port to connect a network device, such as a computer, to the phone". What types of problems might be encountered if that device is a Netgear Fast Ethernet Unmanaged FS105 five port switch? Is there any documentation indicating whether this "supported" or "not supported"?
I know that the speed on the devices connected to the Netgear will be cut to 10/100. The devices connected to the Netgear would include - at a minimum - a computer and a Cisco wireless access point. Other devices which might be connected could include additional computers and/or a printer.
The computer(s) would also need to access a distributed video stream daily.
We are running CallManager 8.6.2.21900-5 with phone types: 7940, 7941, 7945, 7965
Thanks for any insight you might be able to provide.

Will Cisco support you doing this? Not likely.
Will it work? I suppose, in theory, it should. Just don't complain if it doesn't.
GTG

4 port switch to 8 port 1GB, iMac loses ethernet cable

We are getting prepped for an upgrade from our 10MB internet service to 1GB fiber. We were trying to do the easy things first, but have run into an unexpected problem.
We use a 4 port switch to distribute our current DSL signal to several locations in the house (never with any problem.) To handle the additional speed and add extra spots, we bought and installed an 8 port 1GB switch in exactly the same location. Everything works as previously except my iMac.
For whatever reason (and I would LOVE to hear opinions on why) the Mac now says it does not see an ethernet cable (the same cable, of course) and I lose the internet. The only change is the switch itself.
Am I missing a requirement for changing settings on the Mac to deal with this switch? We have not changed the input speed, we are still on a 10MB DSL. We're stumped.
BTW, if I plug the 8 port switch in, and use a 1GB USB dongle with my current ethernet cable, the iMac works fine. And it still works with the 4 port switch. Definitely not a cable problem. Stumped. Many thanks for any and all ideas.

Thanks for both your replies. I read them earlier in the day, and been trying a few things out...
1st, I tried plugging the hub3 into lan4 on the peak switch, and the other 2 (sky and roku), along with my laptop for testing purposes into 1, 2 and 3, and all worked great!
Well... all wasnt so great, the connection was sporadic and intermittent, ping was low, and throughput was fast, but it was on and off. A speedtest.net would stall, web links sometimes took 2 or 3 clicks, and so on.
So what have I learnt? Well, the fact that it has an internet port (which I was wrongly trying to use before), means that it isnt a basic switch.
So today, I went and bought http://www.tp-link.dk/products/details/?model=TL-SF1005D. Plugged that in the same way, and everything works perfect!
So now, I have the router (downstairs), plugged into the hub3 (upstairs via existing ethernet run throuth the stairs), 3 ports plugged into 2 pc's and 1 youview box, the 4th into a powerline socket upstairs,, with the other powerline socket plugged in downstairs behind the TV, connecting to the tp-link switch socket 5, with the sky+HD and Roku XL plugged into 1 and 2 on the switch respectively, and after testing I now everything running lightening fast with HD on demand, and the world is good
So thanks for both your advice, i learnt a bit today.

LMS DFM - Wrong Port Alert on 3560-8 Port Switch

Hi,
there is a strange Port Util. Alert from DFM reporting High Util. on Port 1.9 which not exists on this Switch.
Beside this it reports a WS-C3560-49PS but it is a WS-C3560-8 with 8 Ports without PoE:
Here the Alert:
STATUS                  = Cleared
SEVERITY                = Informational
MANAGED OBJECT          = SWITCH
MANAGED OBJECT TYPE     = Switches and Hubs
EVENT DESCRIPTION       = HighUtilization::Component=PORT-SWITCH/1.9 [->cisco WS-C3560-48PS];ComponentClass=Port;ComponentEventCode=1057;TrafficRate=7706065.0 BYPS;DuplexMode=FULLDUPLEX;UtilizationThreshold=65;MaxSpeed=100000000;Type=E
NOTIFICATION ORIGINATOR = Fault Management Module
And here the Switch:
SWITCH#show int status
Port      Name               Status       Vlan       Duplex Speed Type
Fa0/1                        notconnect   4            auto   auto 10/100BaseTX
Fa0/2                        notconnect   4            auto   auto 10/100BaseTX
Fa0/3                        notconnect   4            auto   auto 10/100BaseTX
Fa0/4                        notconnect   4            auto   auto 10/100BaseTX
Fa0/5                        notconnect   4            auto   auto 10/100BaseTX
Fa0/6                        notconnect   4            auto   auto 10/100BaseTX
Fa0/7                        notconnect   4            auto   auto 10/100BaseTX
Fa0/8                        notconnect   14           auto   auto 10/100BaseTX
Gi0/1                      connected    trunk      a-full a-100 10/100/1000BaseTX
Any idea?
Thanks
Herwig

these switches do not have a fan ...
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Normale Tabelle";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Calibri","sans-serif";
mso-bidi-font-family:"Times New Roman";}
Compact Switches
Cisco Catalyst 2960-8TC-L
8 Ethernet 10/100 ports; compact size with no fan
1 dual-purpose port (10/100/1000 or SFP)
Cisco Catalyst 2960PD-8TT-L
8 Ethernet 10/100 ports; compact size with no fan
1 10/100/1000 PoE input port
Cisco Catalyst 2960G-8TC-L
7 Ethernet 10/100/1000 ports; compact size with no fan
1 dual-purpose port (10/100/1000 or SFP)
DFM uses the CISCO-STACK-MIB for the fan status; You can poll 1.3.6.1.4.1.9.5.1.2.9 to see what the switch returns. The values can be interpreted using this list from http://tools.cisco.com/Support/SNMP/do/BrowseOID.do?local=en&translate=Translate&objectInput=chassisFanStatus
1 : other
2 : ok
3 : minorFault
4 : majorFault
The reason for this could be BugID CSCsh15007 for IOS 12.2(35)SE; It is fixed in 12.2(35)SE1;
For a solution, you need to upgrade the IOS.

Best way to connect 2 Cisco 3750 PoE 24-port Switches

Hello. I have 2 Cisco 3750 PoE 24-port switches in a small office environment. Right now I have a trunk configured off my ASA 5505 to switch 1, and then just an access port configured on a port (switch 1) and an access port configured on a port (switch 2) to connect them together. These switches also have 2 GB SFP ports but they are not being used in this configuration.
I was curious to know if anyone had any better recommend configurations for connecting these 2 switches together? I'm not sure if this particular model can be stacked?

What are the exact model numbers (should be written on a sticker)?
You will know if they can be stacked as you will see the 2x stack ports on the back of each switch :)
If they can then that is probably the way to go unless you want to keep them as separate switches for some reason.
If you want them separate, I would connect them via a Trunk link at least so you can have the same Vlans on both.
Thanks

Does 2950 24 port switch support 12.1(22)EA4

Hi,
Does 2950 24 port switch support 12.1(22)EA4 ?
Regards
SKRAO

I deleted the existing IOS image 12.1(22)EA1 from the switch and uploaded 12.1(22)EA4
But after reloading the switch I am facing following problem.
I am attaching the console log.
Regards
SKRAO

8 port or 16 port switch

I am using 8 port and 16 port switches in my organization. Is there any way to block the ports since there is no IOS that comes in these switches?

The SD216 is an unmanaged switch, so there's no way to block the ports from
software.
What you could possibly do:
block the ports physically: stuff something in the unused ports, like vax or something. This will void your warranty, though.
if you have a managed switch between this SD216 and the rest of the network, assign static MAC addresses on that switch and disable dynamic learning.
Cheers,
Tamas

EZXS16W linksys 16 port switch, can open homepages but cannot navigate anywhere else.

I recently installed a network for a friends business. They have 8 computers for their network. To start I connected the cable modem to a linksys wireless n router and then i have plugged in a EZXS16W linksys 16 port switch. Everything has been working fine for about a month until last week. Everything starts fine in the mornings when they turn on all the computers and continues to work fine for a couple of hours. After that they can open up their homepages (each computer has a different one) but when you try to go to another web page it can take up to 10 minutes or never load at all. If i restart the router and switch everything goes back to normal for several hours then happens again. Any help would be greatly appreciated! Thank you!

Are you facing these problem on all your Wired Computer or certain wired computer? In these case i would suggest you to lower down the MTU size on your Router from 1500 to 1350 and then check if you face these same problem or not.
If the same problem persist then i think you need to upgrade the firmware of your Router.

Adding a second SG-300-52 port switch

I have a SG-300-52 port switch configured Layer 3 with mutiple VLANs. I have run out of ports. What is the best way (or easiest) to bring up a second SG-300-52 port switch with the same VLAN configuration?

Hi Alison,
Personally, the first thing that came to mind was to create a link aggregation group (LAG) on both switches.
Also make sure the switch is using the most current firmware, version 1.1 it's too good not to use.
1. I would create a link aggregation group (LAG) to, link a few GbE ports between switches. This has to be done on both switches.
This link aggregation group creates a number of benefits, two of which are;
multiple links between switches that improves throughput between switches and
provides link redundancy as well between switches.
[note: I believe, I had to remove the tagged vlans from my switch ports ports, so that these ports could be added to link aggregation group, as the link aggregation group will eventually be tagged for multiple VLANs. But that's a later step.]
Here is a posting that shows the configurations steps that I used on my switch,
I think when you see the posting it may make alot more sense;
https://supportforums.cisco.com/thread/2079258
2. On the new switch, again make sure you are using firware version 1.1.
Alison, using the same method that you used on the original switch, create your vlans on the new switch, but remember to create the LAG and add the tagged vlans to the LAG.
regards Dave.

ProConnect Integrated KVM 2-Port Switch

Similar Messages

Maybe you are looking for