Procurement proposals for Sales order.
I have created material master record for Fert Material X having storage location A and B maintained in MR4 view.
Also MRP area for storage location A is assignned to material.
When Sales order with delivery storage location A will be made then by which MRP(Plant or MRP area) procurement proposals for Sales order will be created.
hi
Mayuresh
Your Plant will be same since you have defined two Storage Loaction in MRP Area. The procurement proposal will come for Storage Loaction A. If Sale order is created with delivry location A. Please also check Storage present in Work Scheduling view..
rgds
BV
Similar Messages
-
Invoiced blocked for sales order (configurable material external procurement )
Hello Expert
Configurable material external procurement
Invoiced blocked because ,"Error reading the material cost estimate for sales order "75501"
Message no. KE292
Diagnosis
In Profitability Analysis (CO-PA), the system tried to valuate item
000010 of sales order 75501 by reading the corresponding product cost
estimate.
However, no product cost estimate could be found for this sales order
item.
The system accessed product costing for product 10820 using costing
key 002 as defined in the
CO-PA Customizing
settings.
System Response
The system cannot process the document any further.
Procedure
Check your Customizing settings.
Note:We can't run cost estimate and releasing it because it's a configurable material but external procurement. We place a purchse order based on configurable sales orser
Thanks
ParvesHello Declan,
Thanks for your reply. Could you please give me the steps for Maintain the
sales order cost estimate?
Requirement: Customer service receive order with variant configuration product,
then MRP Crete PeReq, convert PO and
send to supplier .Supplier configure the product and direct delivery to
customer. Supplier sends an invoice to us. Then we send invoice to our customer
Thanks
Parves -
Goods Receipt for sales order stock
Hi everybody,
I want to receive materials for sales order stock. what I did:
1- Created a Purchase order,
2- Account Assignment = C
3- went to MIGO
4- selected PO number
5- set movement type 101 / E
the SAP give error message that you have not planned 101 / E !!!!
I searched alot but couldn\t find the solution.Hi Dear,
When you use C account assignment category, System will consume those materials/services for the respective sales order at the time goods receipt/service confirmation. There is no inventory possible when we use, account assignment C as a standard, If you want to make inventorize, we have to choose account assignment category M against sales order.
When we are procuring material against project, Account assignment Q-will be inventoried and P-will be consumed for respective cost object
Like the same M-will be inventoried and C--will be consumed for respective cost object
R,
Amala Srinivasa Rao -
How can we identify what are all user exits are there for sales orders,deli
Dear All,
How can we identify what are all user exits are there for sales orders,deliverys and invoices
thanks
nitchel vHi Nitchel
There are many ways to find out the user exits..
For example for VA01.
Goto Transaction ie VA01:
goto System-- Status
doubleclick on the program name ie SAPMV45A
SE38 -> Enter the program name and in the program( SAPMV45A) goto -- attributes
get the package name from here ie VA
note the package(VA) and get back to main screen
goto SMOD tcode and click on find button in the package spec giv the package name ie VA and execute it
you will find list of exits available
check out the exit that suits ur requirement
goto cmod and create a new project and implement in that user exit.
You will get the following exits in SMOD..
SDTRM001 Reschedule schedule lines without a new ATP check
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly
V45L0001 SD component supplier processing (customer enhancements
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing
For Delivery you will get .. here the package name will be VL.
V02V0001 Sales area determination for stock transport order
V02V0002 User exit for storage location determination
V02V0003 User exit for gate + matl staging area determination (h
V02V0004 User Exit for Staging Area Determination (Item)
V50PSTAT Delivery: Item Status Calculation
V50Q0001 Delivery Monitor: User Exits for Filling Display Fields
V50R0001 Collective processing for delivery creation
V50R0002 Collective processing for delivery creation
V50R0004 Calculation of Stock for POs for Shipping Due Date List
V50S0001 User Exits for Delivery Processing
V53C0001 Rough workload calculation in time per item
V53C0002 W&S: RWE enhancement - shipping material type/time slot
V53W0001 User exits for creating picking waves
VMDE0001 Shipping Interface: Error Handling - Inbound IDoc
VMDE0002 Shipping Interface: Message PICKSD (Picking, Outbound)
VMDE0003 Shipping Interface: Message SDPICK (Picking, Inbound)
VMDE0004 Shipping Interface: Message SDPACK (Packing, Inbound)
For Billing VF01..Package is VF..
SDVFX007 User exit: Billing plan during transfer to Accounting
SDVFX008 User exit: Processing of transfer structures SD-FI
SDVFX009 Billing doc. processing KIDONO (payment reference numbe
SDVFX010 User exit item table for the customer lines
SDVFX011 Userexit for the komkcv- and kompcv-structures
V05I0001 User exits for billing index
V05N0001 User Exits for Printing Billing Docs. using POR Procedu
V60A0001 Customer functions in the billing document
V60P0001 Data provision for additional fields for display in lis
V61A0001 Customer enhancement: Pricing
Or another way is ..
- Get the program name for that T-Code
- Go to that program
- In that program, search for word 'EXIT' or 'CUSTOMER-FUNCTION' by using where-used list which will give u the list of user exits for that program
And also you can check in the tables in SE16 for user exits..
MODSAP - Stores SAP Enhancements
MODSAPT - Stores SAP Enhancements - Short Texts
MODACT - Stores Modifications
And there are other ways as well , pls check the forum for this ,
Regards,
Vvieks
Note : If you have any specific requirement then pls let us know , we will guide you -
Hi Gurus,
I have to caculate the volume discount based on the goods ordered. So that i have to calculate the discount and update it into Net value in condition tab in va01. Please provide the what is the BADI for that suitable requirement so that it should be executed before saving the order. And also the discount should be displayed in the item level. Please provide me some suitable solution.
<b>Its Very urgent.</b>
Points will be awarded
Regards
RaviHi
Use the Std Include MV45AFZZ for writing the user exits related Sales order
which is a include in the std sales order program SAPMV45A
Write the code in the appropriate FORM..ENDFORM.. and see
see further the following Exits and BAdis for Sales order
Enhancement
V60F0001 SD Billing plan (customer enhancement) diff. to billing pla
V46H0001 SD Customer functions for resource-related billing
V45W0001 SD Service Management: Forward Contract Data to Item
V45S0004 Effectivity type in sales order
V45S0003 MRP-relevance for incomplete configuration
V45S0001 Update sales document from configuration
V45P0001 SD customer function for cross-company code sales
V45L0001 SD component supplier processing (customer enhancements)
V45E0002 Data transfer in procurement elements (PRreq., assembly)
V45E0001 Update the purchase order from the sales order
V45A0004 Copy packing proposal
V45A0003 Collector for customer function modulpool MV45A
V45A0002 Predefine sold-to party in sales document
V45A0001 Determine alternative materials for product selection
SDTRM001 Reschedule schedule lines without a new ATP check
SDAPO001 Activating Sourcing Subitem Quantity Propagation
Business Add-in
BADI_SD_SCH_GETWAGFZ Scheduling Agreement: Read WAGFZ from S073
BADI_SD_V46H0001 SD Customer functions for resource-related billing
<b>Reward points for useful Answers</b>
Regards
Anji -
Query for Sales Order Analysis
Dear Experts
I have written a Query for Sales Order Analysis and would like to have help on this.
The query is used for generating daily report for Sales Order on number of documents (Sales Order), total amount of sales orders and total GP of Sales Order. The query is written as below:
SELECT T0.[DocNum], SUM(T0.DocTotal) AS 'Total', SUM(T0.U_Total_GP) AS 'Total GP'
FROM ORDR T0 WHERE T0.[DocDate] =[%0] GROUP BY T0.[DocNum] ORDER BY T0.[DocNum]
where U_Total_GP is a UDF for storing the GP of each order.
After executing the query, a selection criteria of date appears and after a date is selected, the report shown information required. However, the query does not calculate column total for total amount and total GP. Although I know the total for each column can be displayed by pressing "Ctrl" + Click on the column title, it would have to be done from time to time.
Therefore, I would like to modify my query in order to calculate the column totals when executed. Are there any suggestions for this?
Thank you
Regards
EltonHi Elton,
Try this:
SELECT T0.[DocNum], SUM(T0.DocTotal) AS 'Total', SUM(T0.U_Total_GP) AS 'Total GP'
FROM ORDR T0 WHERE T0.[DocDate] =[%0] GROUP BY T0.[DocNum]
Union ALL
SELECT '', SUM(T0.DocTotal) AS 'Total', SUM(T0.U_Total_GP) AS 'Total GP'
FROM ORDR T0 WHERE T0.[DocDate] =[%0]
ORDER BY T0.[DocNum]
Thanks,
Gordon -
Workflow for Sales Order Release via Status Profile
Dear all,
i want to make a workflow for sales order which have 4 User Status in One status profile.
Once Event triggered for sales order
1. Mail should go to main authority with sales order number.
2. Once authority will do some changes in the required field then he/she changes
the user status-1 from defauts as per line Item and mail should go to department no-1 (Head authority).
3. Once again same changes in sales order but now user status-2 from user status-1
as per line Item and mail should go to department no-2 (Head authority).
4. Once again same changes in sales order but now user status-3 from user status-2
as per line Item and mail should go to department no-3 (Head authority).
5. Once again same changes in sales order but now user status-4 from user status-3
as per line Item and mail should go to department no-4 (Head authority) .
and parrally for each changes of Status mail should also go to User (Event Creator).
6. Finally mail sholud go to User as you are permitted to do next business transaction for this sales order
Please tel me the process as i am very new this topic and i am always going to stuck in Binding.
please help me out.
Thank YouHi Neeraj,
First of all start with SWELS and SWEL T-Code to check if any standard event is getting triggered or not. If event is getting triggered, then use the same event to trigger the workflow; otherwise create a custom event of BO and use the same to trigger the workflow.
Hope you are aware of T-Code SWO1 and delegation of BO. The BO used for your requirement will be BUS2000115.
As you want the workflow to get triggered only for one status profile and one of its status, so use check function module. There set the condition for you status profile and status.
The FM which you will be using the most is CRM_ORDER_READ. To read the status, you can also use CRM_STATUS_READ_OW.
Now simply make the approval steps in the workflow using activity. In the activity, you can use the standard method USERSTATUSPOPUP to send the workitem for approval. In each step use the same activity with different agents as approvers.
Just go with these things and let me know if you get stuck up somewhere.
Regards,
Guddan -
hi,
i need to eliminate leading zeros for PO number which comes in SO created trough ALE.i found the enhancement for the FM idoc_input_orders.in that enahancement we have 12 FM's.my Leading zeros are comming for field belnr which comes in e1edk01 segment of idoc orders05.now i had coded my part of coding in FM exit_saplved.._oo1 and i had activated that.but it is not working for me.than i tought of going to other FM exit_sapl..._009.in which i'm not able go into the include either.plz help me out.thank you.Hi, Krishna!
With IDOC_INPUT_ORDERS during IDoc interpretation PO number is assigned to XVBAK-BSTKD field which is later used for sales order creation with reference to PO.
So all you need is to use some customer exit with changing parameters containing XVBAK after IDoc interpretation is completed. For example you can use EXIT_SAPLVEDA_009 which is called at the end of IDoc check after interpretation.
Regards,
Maxim. -
RBA GATP check is not getting invoked for Sales Order
Hi Everyone,
RBA GATP check is not getting invoked for Sales order.
I maintained the configuration settings for 'Rules-Based Availability Check', APO general settings (check mode, check instruction), carried out integrated rule maintenance, Rule determination for the combination of order type & product, associated the check mode to product master. Also maintained all the settings in ECC towards Req class, Req type, checking control etc.
However, sales order is not invoking RBA Check though it is showing up the 'Rule' icon in the screen. Also, in the APO Availability check in Sales order when I click onto 'check instruction', I get the checking mode that pertains to RBA for business event 'A' (Sales order). Though I have not maintained any stock for the main material for which I have the sales order, yet system is confirming any quantity that I put in.
I would expect that system would propose the same material in an alternate location where we have stock through RBA.
Request you to share ideas on this.
Regards,
Avijit DuttaHi Avijit,
You should used No Checking Horizon in Checking instructions and also Check your rule control settings.
What you have defined in 1st and 2nd steps. Check whether product substitution is carried out or Location Substitution.
Thanks,
Bala. -
How to create a daily report for sales order
hi
how to create a daily report for sales order. what fields it must consists of. what are the tables it need?Hi
You have to use the sales order tables VBAK,VBAP and VBEP
So keep date field on selection screen
and treat this date as Order creation data audat field in VBAK.
based on this fetch the data from VBAK and VBAP with the following fields like
VBELN, KUNNR,NETWR,POSNR, MATNR,ARKTX,KWMENG,WAERS etc and display in the report
<b>Reward points for useful Answers</b>
Regards
Anji -
Report for Sales Order Change History CDPOS and CDHDR
How to take a report of the data for the Sales Order Change history for a particular period of time. It is required to take a report of all the Sales Orders for which the basic price has been changed. Please let me know the procedure. I could not get the data from the table CDPOS and CDHDR
Helpful answer would be rewarded.
Regards
PraveenDear Praveen Kumar
Have you tried with VBAP where sale order details at item level would be stored.
Moreover, to my knowledge, there won't be any changes as for as pricing is concerned at sale order level but there is at billing level. Normally, any price increase / decrease would reflect in billing. So why dont you to table join through SQVI VBAP (for sale order details) and VBRP (for billing details) so that you can compare the selling price in sale order with billing.
Thanks
G. Lakshmipathi -
How to look for sales order number if I know outbound delivery number?
How to look for sales order number if I know outbound delivery number?
Hi ,
If you want to see the Sales order Number from Outbound delivery or invoice,go to their respective T-codes,say for example,
for delivery,Goto Tcode: VL02N / VL03N.There you will find Document Flow Icon,click on that,or press F7.
You will get a window,there you can see the Sales order Number before your outbound delivery Number
With Thanks and Regards,
Priya -
WBS element for Sales Order Item level
Hi gurus,
I am trying to create an inbound idoc for sales order ' VA01'. I need to populate WBS element in the item level under Account Assignment Tab. I am using ORDERS05 basic type. Please help to find which segment to use for WBS element. Waiting for your reply. Please help.
Regards,
Satyajit
Edited by: Satyajit Saha on Feb 22, 2008 1:24 AMHi gurus,
I am trying to create an inbound idoc for sales order ' VA01'. I need to populate WBS element in the item level under Account Assignment Tab. I am using ORDERS05 basic type. Please help to find which segment to use for WBS element. Waiting for your reply. Please help.
Regards,
Satyajit
Edited by: Satyajit Saha on Feb 22, 2008 1:24 AM -
Requisitions for sale order stock
Requisitions for sale order stock that are generated directly from the
sales order are not passed to SRM but requisitions that are created
manually for sales order stock are passed to SRM.
Why is the sourcing of a requisition for sales order stock where the
requisition was created directly from the sales order not supported?Hi,
We need same requirement, we found only PR's with item category "5"(Third party ) created from sales are transfered to SRM.( It is hard coaded in ECC).
Let us know if you are able to resolve your issue.
Thank you
Sreedhar Vetcha -
In which table,i could find order quantity for sales order..??
In which table, i could find order quantity for sales order..??
and also in which table i could find delivery for sales order..
need help..??
Moderator message: please search.
Edited by: Thomas Zloch on Feb 23, 2012Check the table AUFM.
Give the order number in AUFNR.
For movement type 261 (GI) & 101 (GR), you can get the material document number (MBLNR), Material (MATNR), Qty (MENGE) & UoM (MEINS).
Maybe you are looking for
-
WGM error while trying to connect to Active Directory
Hello I'm trying to insert AD groups into OD groups so I can create automounts to a users specific network folder. When attempting to connect to AD from within WGM I get an unexpected error. It states: Error of Type eDSOpenNodeFailed (-14002) on line
-
What cable do I use to connect my iBook to my iMac so it displays the iBook's screen?
What cable do I use to connect my iBook to my iMac so it displays the iBook's screen?
-
Quicktime mpeg-2 and quicktime versions don't match
I bought quicktime pro and the mpeg-2 add on but the program tells me the versions are not compatible even though they both say the same version identification. Does anyone know why it tells me the versions are different when they aren't ?
-
HI, I am tring to integrate SAP Business Connector(SAP-BC) with XI. I am able to send the data through XI's BC adater( receiver) to BC. But i am unable to handle teh data in BC. 1) I want to know how is BC capable of Handling XML Data? If yes how can
-
Jdbc driver deployment problem..
Hi xi Gurus... I have a scenario <b>File-XI-JDBC</b>(My Sql 5.0), i am using receiver side <u>My Sql</u>.. I downloaded the drivers for that also.. drivers are <u>mysql-connector-java-3.1.10.jar</u>.. i added this jar file to this .sda file(a