Product Registry and Forte problems
Hi chaps!
I downloaded Forte Community Edition 1.01 but can not install it because it
does not progress past the "Extracting..." stage.
Additionally, when I try to run "prodreg", I get the following exception:
============================================================
setting up display...
setting up product view...
setting up attribute view...
Exception in thread "main" java.lang.NullPointerException: NullPointerException
at sun.awt.motif.MFramePeer.pSetIconImage(Native Method)
at sun.awt.motif.MFramePeer.setIconImage(MFramePeer.java:149)
at sun.awt.motif.MFramePeer.<init>(MFramePeer.java:54)
at sun.awt.motif.MToolkit.createFrame(MToolkit.java:138)
at java.awt.Frame.addNotify(Frame.java:353)
at java.awt.Window.pack(Window.java:365)
at com.sun.prodreg.AppletFrame.<init>(AppletFrame.java:39)
at com.sun.prodreg.ProdReg.view(ProdReg.java:385)
at com.sun.prodreg.ProdReg.main(ProdReg.java:53)
======================================================================
I am running Solaris 8 EA on a Dual Celeron 488Mhz box with 224MB of RAM.
I have tried both the Java 1.2.2 and 1.3-Beta revisons
Has anyone else had this problem or know how to fix it?
Any advice appreciated.
Cheers
As far as I know, there is no way to read the Windows registry directly and even if there were one, that would make your application no portable to any other platform (which is one of the nicest features of Forte)
Anyways, a workaround would be to write a small VB app that reads the Windows registry, gets the value and writes its output as a file. Forte can excute the VB app and then read the output file and then start the new app.
Hope this helps...
Similar Messages
-
Smart update reports "global product registry is invalid" when invoked
When trying to use smart update from Weblogic 7.0 sp2 it displays an error saying
"The global product registry is invalid". What is this gloabl product registry
and how can I fix the problem.
Thank you.Yup. It works.. Thanks. Dan
"Dan" <[email protected]> wrote:
>
Thanks! Indeed, based on the erros I saw in the log files this might
be the cause.
I'll give it a try from another location, served by different DNS servers
and
I'll let you know.
Thanks again.
Dan
"Platform Team" <[email protected]> wrote:
It appears that your DNS server can't locate bidslb.beasys.com.
"Dan" <[email protected]> wrote:
Hi there,
I have my bea home in D:\Program Files\bea and WL8.1 installed in wl81
Whenever I try to run Smart Update I get this error message:
"Unable to parse product information *BEA Home [D:\Program Files\bea]
The global
product registry is invalid."
The screen capture of the error is attached to this posting.
Does anyone know how to fix this ?
Thank you
Dan -
I am having a issue installing Adobe Acrobat XI. I am running Windows 8.1. When go to install it gets an error. The error is with transform in registry and will not install product. I am looking at how I can fix this registry problem.
I have tried to uninstall all Abode Acrobat installations but one file remains and refuses to be uninstalled. It gives me this error : Error applying Transforms . Verify that specified paths are valid. It was installed on Sept 18 2014. I have downloaded a Transform update but it tells I do not have a Adobe Acrobat product installed.Hi all,
Sylonious, did you manage to sort this problem out? I have been experiencing similar problems. I think my problem was because I had many different versions of JDKs. I have done a complete re-install. I would be really grateful to you (and anyone else) for help with this problem.
I have re-installed JSDK1.4.2_03, set the "path" variable to "C:\JSDK1.4.2_03".
When I compile using "javac" I get an error saying "javac" is not recognised.
When I compile using "C:\j2sdk1.4.2_03\bin\javac Freq.java" no error is thrown.
Every time I try to run a java file, I always get the NoClassDefFound error. When run with the -verbose option, files are loaded from C:\Program Files\Java\j2re1.4.2_03\bin - is this correct?
I have removed all previous references to java in the registry editor.
Please help !
Regards,
Vipul -
Re: Rational Rose product and Forte
We use Forte 3.0 with Rational Rose 4.0 since more than one year on a
medium size project (10 developers). I have not tried Rose98 with Forte,
so what I have to say may or may not apply to Rose98.
In general I am very satisfied with the Forte support of Rose. The code
generation facilities are sophisticated. For example from one attribute
in Rose you can generate a virtual attribute and the corresponding get
and set methods which implement the virtual attribute. You can even
change the naming conventions (how to generate the name of get and set
methods). You can also model all components of a Forte application like
interfaces, events, eventhandlers, constants, domain types etc.
Since access to the Forte repository is difficult, Rose does not read
from or write to the repository. Instead you must export a plan as a
.pex file, regenerate the plan from Rose and reimport the generated file
into Forte. Rose correctly preserves the code that you have written as
well as other information like GUI layout etc. Nevertheless this process
is a bit tedious and prone to errors.
Rose can import a Forte .pex and produce a model from it ("reverse
engineering"). This works O.K. but I use it only on small prototypes
that I developed in Forte to get a "first cut" of a model. The analyzer
has only a few global options (for example whether you want to model
object-valued attributes as associations or as attributes). In addition
it names all attribute types and method parameters with fully qualified
class names so that your methods tend to have very long signatures like
Add(input source:Framework.IntegerData):Framework.IntegerData
instead of
Add(source:IntegerData):IntegerData
On the other hand Rose generates correct Forte code if you use the short
form in your model. So I use Rose mainly for forward generation.
I find the combination of Rose with Forte very valuable, mostly because
Forte does not allow a convenient documentation of plans, classes and
attributes.
If you have additional questions, I will be happy to answer them.
Robinson, Richard wrote:
>
Has anyone used Rational Rose products and Forte? Could you post a short
summary that explains how easy/hard it is to work with and whether or not
the reverse engineering features work well?
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>--
Dr. Thomas Kunst mailto:[email protected]
sd&m GmbH & Co. KG http://www.sdm.de
software design & management
Thomas-Dehler-Str. 27, 81737 Muenchen, Germany
Tel +49 89 63812-221 Fax -444
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>I'm having the same problem. The last version of Forte known to work with Rose is Forte 3.0, but I can't find that version for download.
Let me know if you've found any other solution.
Adam Southall -
Rational Rose product and Forte
Has anyone used Rational Rose products and Forte? Could you post a short
summary that explains how easy/hard it is to work with and whether or not
the reverse engineering features work well?
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>Eric,
As part of tool evaluation for modeling, We evaluated Rational Rose 98i . We
were able to import forte pex files into Rose model.
We had no problems with reverse engineering but there were problems related to
round trip engineering.
Since Rational Rose 98i did not have a repository based solution for
configuration management, it was quite a task to keep the model in sync with
multiple users updating it. However, I believe you can use Microsoft Source
safe for configuration management though we did not try this.
Ramesh Timakondu
PSI Data SYstems Ltd.
One Bank Street, Ste. 406
Stamford, CT, 06905
(203) 359 3992
tnkrampsidata.com
"Fingerhut, Eric" <Eric.Fingerhuthbo.com> on 02/16/2000 04:26:59 PM
To: "'kamranaminyahoo.com'" <kamranaminyahoo.com>
cc: (bcc: Ramesh Timakondu/Consultant/NAC)
Fax to:
Subject: (forte-users) reverse engineering with Rational Rose
Is anybody using the above?
If so, have you developed any scripts to facilitate updating the Rose model,
and which you'd be willing to share? Or perhaps discuss jointly writing
same?
Ideally, there would be an Fscript to facilitate exposting Forte projects,
and a Rose script to facilitate import.
TIA,
Eric
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com -
I'm having a problem with the registry and iTunes.
Vista stopped seeing my DVD/CD drive the other day, so I went to the registry and deleted the high and low pass filters for the drive. This fixed that problem.
Only problem now was that none of my programs would see the drive, so I had to reinstall all my burning software and such... except that iTunes, after reinstalling it 5 times, still will not see my drive.
Any ideas or help? Thanks.Hi David-
The advanced adjustments in the Highlights & Shadows tool were combined into the "Mid Contrast" slider in Aperture 3.3 and later. If you have any images in your library that were processed in a version of Aperture before 3.3, there will be an Upgrade button in the Highlights & Shadows tool in the upper right, and the controls you asked about under the Advanced section. Clicking the Upgrade button will re-render the photo using the new version of Highlights & Shadows, and the Advanced section will be replaced with the new Mid Contrast slider. With the new version from 3.3 you probably don't need the Advanced slider, but if you want to use the older version you can download it from this page:
http://www.apertureexpert.com/tips/2012/6/12/reclaim-the-legacy-highlights-shado ws-adjustment-in-aperture.html -
i had to take my photoshop file into a hardrive because my dad was going to give me a new Mac and when things didn't work out and went back to my old one i use the time capsule thing to save everything before but didn't give me photoshop so i physically moved the file and tried to open it but then this error shows up
Please uninstall and reinstall the product.
If this problem still occurs, please contact Adobe technical support for help, and mention the error code shown at the bottom of this screen.
Error: 16
and when i click the uninstall app on the file it tells me this
The alias “Uninstall Adobe Photoshop CS6 2” can’t be opened because the original item can’t be found
and when i click fix alias i click on photoshop and the app just turns into photoshop and i just run in circles
please help thank youRun the cleaner tool and reinstall.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Download CS6 products
Mylenium -
Hi Experts , I am currently facing problems while running restricted version copy in sap apo .. The log says 0 location products copied and that the process has timed out. the error message is " /SAPAPO/MVM_INT_SVC_CO_VER_LCW reported exception in task DP00014 " , then ending in time limit exceeded. could anyone explain why this happens. please note even if the log says 0 location products copied , in reality they have have been partially copied.
Regards
JerelHi, thank you for your replies, I found out few things about my servlet, and its portability
and i have few questions, although i marked this topic as answered i guess its ok to post
I am using javax.servlet.context.tempdir to store my files in that servletcontext temporary directory. But i dont know how to give hyperlink
of the modified files to the user for them to download the modified files.
What i am using to get the tempdir i will paste
File baseurl = (File)this.getServletContext().getAttribute("javax.servlet.context.tempdir");
System.out.println(baseurl);
baseurl = new File(baseurl.getAbsolutePath()+File.separator+"temp"+File.separator+"files");
baseurl.mkdirs();so i am storing my files in that temp/files folder and the servlet processes them and modifies them, then how to present them as
links to the user for download ?
and as the servlet is multithreaded by nature, if my servlet gets 2 different requests with same file names, i guess one of them will be overwritten
And i want to create unique directory for each request made to the servlet , so file names dont clash.
one another thing is that i want my servlet to be executed by my <form action> only, I dont want the user to simply type url and trigger the servlet
Reply A.S.A.P. please..
Thanks and regards,
Mihir Pandya -
I have downloaded AI Trial but on launching I am getting a Configuration Error which reads '
A problem has occured with the licensing of this product. Restart your computer and re-launch the product.
If this problem still occurs after restarting, contact Customer Support for further assistance, and mention the error code shown at the bottom of this screen.
Error: 213:5.
I have tried the restart suggestion, but the problem persists.
Can anyone assist.
TImTim,
This may be one for this specialized forum (where you may be able find the answer from previous threads),
http://forums.adobe.com/community/download_install_setup
or for a chat,
Creative Cloud support (all Creative Cloud customer service issues, chat open between 5AM and 7PM PST/PDT on workdays)
http://helpx.adobe.com/x-productkb/global/service-ccm.html
or for Adobe phone Support,
http://helpx.adobe.com/adobe-connect/adobe-connect-phone-numbers.html -
I am having a problem opening pdf files. I get an error message saying
a problem has occurred with the licensing of this product. Restart your computer and re-launch your product. If this problem still occurs after restarting ... error code:213:19Hi AdobeFiles,
I'm sorry to hear that you're unable to open PDF files. Please see this Help document: Error 213:19 | Problem has occurred with the licensing of this product | Acrobat X and XI for solutions.
Let us know how it goes!
Best,
Sara -
Can't install due to "registry" and "dll" error messages.
I can't install any Adobe products. This occured after a complete reinstall of my Windows XP - if that has anything to do with it. I have done a reinstall before without any problems.
I keep getting error messages about "missing registry" and "dll"s.I tried to install again to see what the exact error message was, but now all I get is a Microsoft message that says "Adobe Flash Player Installer has encountered a problem and needs to close." I have been having other problems installing other products and have been getting messages like "Entry Point Not Found" followed by messages like"entry point...could not be located in the dynamic link library".
I don't know exactly what "repaired" means in installing an OS. What I did was use my reinstall Windows OS disc and follow the instructions for a "clean" install. The prompts say that my files will be wiped out, and that programs will have to be reinstalled. When promted to pick a partition I always pick the default of a 50/50 split of the hard drive. -
Re: Crystal Reports 5.0 (32-Bit) and Forte 2.0H16 on NT3.51
Dear Silke,
Crystal's default for identifying a table in the report design is
<schema>.<table>. You can change that by going to the Database Location menu
item and cutting the schema prefix off. You should do that for every table in
the report. The PESetNthTableLogOnInfo function will, I believe, not change
the schema prefix of a table, since it assumes you really want that schema,
i.e., as an override. Also, if you are using the propagateAcrossAllTables
feature of the function make sure that every table has the schema prefix cut
off, otherwise those tables will be skipped, since the propagate feature applies
to all other similar tables only. For example, some of the tables could be
Sybase, etc.
I believe you can change the default behaviour of the CR Report Designer in the
File->Preferences menu, so that when reports are designed the schema prefix is
not automatically attached.
I have compiled some guidelines on designing reports to make them work properly
with Forte. I will try to send them to you next week. Crystal Reports and its
C API are a good product, and you will get good performance once the report
design is set up properly.
Yours very sincerely, John Hodgson.
Schulte, Silke (DVD) wrote:
The problem seems to be, that Crystal stores the database name in the
report. If you want to change the database you have to develop your
report new, although you give the connection-information via the API.
The hotline from Crystal told us, when using subreports you have to use
the PESetNthTableLogOnInfo and to go through all the subreports and
change the connect-string.
Our experience is, you have to do both: change the report and call the
other function for the subreports.
Thank you very much for all the tips.
Regards
Silke Schulte
Union-Investment, Frankfurt / Main, Germany
e-mail: [email protected]
From: Ajith Kallambella M[SMTP:[email protected]]
Sent: Mittwoch, 23. September 1998 15:17
To: [email protected]; ForteUsers; [email protected]
Subject: RE: Crystal Reports 5.0 (32-Bit) and Forte 2.0H16 on NT
3.51
Hi There,
Crystal reports stores Database name as a hard-coded
value in the
report template. So if you have to use an other
database, you will
have to open the report template and modify the
database name. I
think this is why you are getting Crystal API error.
Hope this helps!
Ajith Kallambella M
Forte systems Engineer,
International Business Corporation.
Hello,
I wonder if we have a similar problem.
We are using Crystal Reports 5 and Forte 3.0.F.2. For
the interface
between Forte and Crystal we have in Forte a Lib using
C-wrappering to
the C-API of Crystal.
We have developed a report on a database in our
development-environment. This report comes up with data
and works
correct. It's no different if we have saved the report
in Crystal with
data or without.
If we want to use the same report on another database
in our
test-environment the window from crystal reports comes
up and when
starting there is an error from the Crystal API
function.
Both environments use the same version of an Oracle
Database and are on
Open VMS. The client for the test is in this case
always the same.
From the C-API we use the method PEStartPrintJob after
we have specified
the rest for the report.
Is there a possibility that this is the same error you
mentioned? Or do
you have any other ideas?
Any help is appreciated.
Regards
Silke Schulte
Union-Investment Frankfurt (Germany)
email: [email protected]
From: Katie Carty[SMTP:[email protected]]
Reply To: Katie Carty
Sent: Montag, 21. September 1998 19:14
To: 'Tim Hagemann'; [email protected]
Subject: RE: Crystal Reports 5.0 (32-Bit) and Forte2.0H16 on NT
3.51
Tim,
You need to upgrade to CrystalReports 6.0. There isa bug in the
interaction between Forte and CrystalReports 5.0 (Idon't know on
which side the bug resides, but I think that it is onthe Crystal end,
since the problem occurs both through C-wrapperingand OLE
interaction), which does not allow you to invoke thePrintReport
method unless you have saved data with the report.
As far as I know, there is no workaround, and theonly solution is to
upgrade to CrystalReports 6.0.
FYI, there is no ActiveX control supplied withCrystalReports 5.0 -
you are actually using standard OLE integration.
Hope this helps...
Regards,
-Katie
-----Original Message-----
From: Tim Hagemann [SMTP:[email protected]]
Sent: Monday, September 21, 1998 11:27 AM
To: [email protected]
Subject: Crystal Reports 5.0 (32-Bit) and Forte2.0H16 on NT 3.51
Hi Forte-User !
We got a big problem here using the crystal active-xcontrol. On my
windows-nt 4.0 machine (with
crystal reports installed completely) all works well.On our test
machine (with only the crystal ActiveX
installed), the Forte runtime shuts down afterinvoking a special
method of the ocx (PrintReport).
The cause for shutting down (no stacktrace orsomething like that) is
a generated c++ exception in crystal -
but we don't know the cause of this exception.
Has anyone made the control work under nt 3.51 ? Doesanybody know
(exactly) what dll's we'll have
to use ?
TIA,
Tim Hagemann
Tim Hagemann
Ascom GmbH Email:
[email protected]
Charlottenburger Allee 61 Phone: +49241 96806 273
D-52068 Aachen Fax: +49241 96806 225
>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>-
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>Dear Silke,
Crystal's default for identifying a table in the report design is
<schema>.<table>. You can change that by going to the Database Location menu
item and cutting the schema prefix off. You should do that for every table in
the report. The PESetNthTableLogOnInfo function will, I believe, not change
the schema prefix of a table, since it assumes you really want that schema,
i.e., as an override. Also, if you are using the propagateAcrossAllTables
feature of the function make sure that every table has the schema prefix cut
off, otherwise those tables will be skipped, since the propagate feature applies
to all other similar tables only. For example, some of the tables could be
Sybase, etc.
I believe you can change the default behaviour of the CR Report Designer in the
File->Preferences menu, so that when reports are designed the schema prefix is
not automatically attached.
I have compiled some guidelines on designing reports to make them work properly
with Forte. I will try to send them to you next week. Crystal Reports and its
C API are a good product, and you will get good performance once the report
design is set up properly.
Yours very sincerely, John Hodgson.
Schulte, Silke (DVD) wrote:
The problem seems to be, that Crystal stores the database name in the
report. If you want to change the database you have to develop your
report new, although you give the connection-information via the API.
The hotline from Crystal told us, when using subreports you have to use
the PESetNthTableLogOnInfo and to go through all the subreports and
change the connect-string.
Our experience is, you have to do both: change the report and call the
other function for the subreports.
Thank you very much for all the tips.
Regards
Silke Schulte
Union-Investment, Frankfurt / Main, Germany
e-mail: [email protected]
From: Ajith Kallambella M[SMTP:[email protected]]
Sent: Mittwoch, 23. September 1998 15:17
To: [email protected]; ForteUsers; [email protected]
Subject: RE: Crystal Reports 5.0 (32-Bit) and Forte 2.0H16 on NT
3.51
Hi There,
Crystal reports stores Database name as a hard-coded
value in the
report template. So if you have to use an other
database, you will
have to open the report template and modify the
database name. I
think this is why you are getting Crystal API error.
Hope this helps!
Ajith Kallambella M
Forte systems Engineer,
International Business Corporation.
Hello,
I wonder if we have a similar problem.
We are using Crystal Reports 5 and Forte 3.0.F.2. For
the interface
between Forte and Crystal we have in Forte a Lib using
C-wrappering to
the C-API of Crystal.
We have developed a report on a database in our
development-environment. This report comes up with data
and works
correct. It's no different if we have saved the report
in Crystal with
data or without.
If we want to use the same report on another database
in our
test-environment the window from crystal reports comes
up and when
starting there is an error from the Crystal API
function.
Both environments use the same version of an Oracle
Database and are on
Open VMS. The client for the test is in this case
always the same.
From the C-API we use the method PEStartPrintJob after
we have specified
the rest for the report.
Is there a possibility that this is the same error you
mentioned? Or do
you have any other ideas?
Any help is appreciated.
Regards
Silke Schulte
Union-Investment Frankfurt (Germany)
email: [email protected]
From: Katie Carty[SMTP:[email protected]]
Reply To: Katie Carty
Sent: Montag, 21. September 1998 19:14
To: 'Tim Hagemann'; [email protected]
Subject: RE: Crystal Reports 5.0 (32-Bit) and Forte2.0H16 on NT
3.51
Tim,
You need to upgrade to CrystalReports 6.0. There isa bug in the
interaction between Forte and CrystalReports 5.0 (Idon't know on
which side the bug resides, but I think that it is onthe Crystal end,
since the problem occurs both through C-wrapperingand OLE
interaction), which does not allow you to invoke thePrintReport
method unless you have saved data with the report.
As far as I know, there is no workaround, and theonly solution is to
upgrade to CrystalReports 6.0.
FYI, there is no ActiveX control supplied withCrystalReports 5.0 -
you are actually using standard OLE integration.
Hope this helps...
Regards,
-Katie
-----Original Message-----
From: Tim Hagemann [SMTP:[email protected]]
Sent: Monday, September 21, 1998 11:27 AM
To: [email protected]
Subject: Crystal Reports 5.0 (32-Bit) and Forte2.0H16 on NT 3.51
Hi Forte-User !
We got a big problem here using the crystal active-xcontrol. On my
windows-nt 4.0 machine (with
crystal reports installed completely) all works well.On our test
machine (with only the crystal ActiveX
installed), the Forte runtime shuts down afterinvoking a special
method of the ocx (PrintReport).
The cause for shutting down (no stacktrace orsomething like that) is
a generated c++ exception in crystal -
but we don't know the cause of this exception.
Has anyone made the control work under nt 3.51 ? Doesanybody know
(exactly) what dll's we'll have
to use ?
TIA,
Tim Hagemann
Tim Hagemann
Ascom GmbH Email:
[email protected]
Charlottenburger Allee 61 Phone: +49241 96806 273
D-52068 Aachen Fax: +49241 96806 225
>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>-
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/> -
Web analysis, SQR Production Reporting, and maybe Interact Rpting are dead?
Hi,
I dont wish to hurt anyone but would like to know the facts from experts.
Look Smarter blog says "Web analysis, SQR Production Reporting, and maybe Interactive Reporting are dead?"
http://looksmarter.blogspot.com/search/label/Top10
Is this true?
Thanks,
ShashiHi Mehmet,
thank you. I could not answer on friday, was not at office.
I tried according to the instructions of oracle ( http://docs.oracle.com/cd/E17236_01/epm.1112/pr_studio/frameset.htm?data_connection.html ). See comments:
To create an Essbase data source connection:
1. OK
Select Connection on the main SQR Production Reporting Studio screen.
The Create Data Connection wizard is displayed.
2. OK
On the first page, enter a name to identify the data connection.
For example, you could enter Essbase to identify a connection to an Essbase data source.
3. OK
On the second page, select DDO to identify the data source provider.
4. NOT OK. The messages shown: "Unable to start the JVM. Ensure that the JRE section of the SQR.INI file contains the correct directory. (4)"
"Unable to erad DDo Registry.Properties file. Check location and accessibility, an that the sqr.ini DDO pathvariable settings are correct (DDO.3)."
On the third page, select an Essbase data source.
The wizard displays the available registries and data sources.
Seems some setting problems. We would check that. Any suggestions to that error??
Ole -
Fixing the problem with the Device Not Recongized by WMP and Mediasource problem with MTP devi
PLEASE READ THE WHOLE THING!!! I KNOW IT SOUNDS LIKE MANY OTHER FAILED SOLUTIONS BUT YOU HAVE TO READ THROUGH MY WHOLE POST TO MAKE IT WORK!!!TRUST ME!!!
ok, now I read this a billion times, and felt that I was the only idiot that had a "bad" computer that didn't allow me to use my Zen mtp device... but it turns out I was more idiotic than I thought. I hope this helps those who have the same problem I had...here goes...
When you go to the Creative Labs website, go to Support, then Knowledge Base, then go to the MP3 players picture in the PRODUCT CATEGORY and click on it. You need to follow the steps that are described on the SID0053 Product Article. Then click on the Editing the System Registry link towards the bottom and it will tell you what to do...BUT there is something that I never ever did right and I bet lots of other folks didn't do right either. Once you are in the USB Properties seccion of the registry, YOU ACTUALY HAVE TO ADD THE WORD "EVERYONE" INTO THE ALLOWED SECCION!!! Not just because it says "Administrators" and what not means that EVERYONE IS ALLOWED, allow the word "everyone"thne click OK. Now, I did this with my Zen Touch on and plugged into the USB port and without the word DOCKED on it, as it wouldn't dock for me before this. that's it... hope it works for you, if it does then almost instantly the word DOCKED should appear on your MP3 player's Display. Hope that everyone has the same luck as I did. if not, I'll pray for you, I know how frustrating this problem is because I delt with it for toooooo long.I had a similar problem with my Zen Touch, but the only symptom was not being able to install MediaSource or the Software Suite. I got the same messages that you did. I was able to use Windows Explorer to add/edit/remove files, but I wanted the Zen Media Explorer so that I could create playlists. After about 2 days of research and trial and error, I ended up fixing it by uninstalling/reinstalling the drivers.
If you don't know how to do that, here are instructions...
I'm using XP SP2, btw, so if you're using another version of Windows, it might be slightly different...
) With the Zen connected, Right-click on "My Computer"
2) Select "Properties"
3) Click on the "Hardware" tab and select "Device Manager"
4) Right Click on "MTP Device" (or MTP Media Player) and select "Uninstall"
5) Disconnect the player from the computer, wait about 5 secs, and reconnect.
When you reconnect it, the drivers will be reinstalled. Try running the setup again after that.
If that still doesn't work, look for random optional Windows updates, maybe?...esp. PlaysForSure, WMP, or USB/mobo/INF/Chipset driver updates...or maybe when it says "Setup could not detect and portable device on your system. Setup will now install the necessary drivers to enable your device to be detected," it actually <i>is</i> doing something, but it isn't apparent until you reinstall the driver. To be honest, I just don't know. The computer I'm using is only a few months old and I didn't have any problems installing on an older computer.
Oh well. I hope that fixes your problem.
As far as the problem with the 360 connectivity, I'm sorry I can't help you there.Message Edited by potestasx on -03-2006:28 PM
Message Edited by potestasx on -03-2006:45 PM -
Reading the Registry from Forte
All,
I recently needed to add the ability to read values
from the Windows Registry using Forte. After searching
through the mailing list archives I discovered that
several others have needed to do the same but the only
solution seemed to be to create a C wrapper for the
Windows API. Currently we do not use a C/C++ compiler
and did not want to do so just to read the registry.
The solution I discovered to this problem is simple
and can easily be added to any Forte application. I
just wanted to share my idea in the hopes that it will
help someone.
The solution is dependent on the Microsoft Windows
Script Host, which allows native execution of VBScript
and JScript on a Windows OS. The host can be
downloaded from Microsoft separately at
http://msdn.microsoft.com/scripting/. Chances are it
is already installed on your machine if you have IE5.
Check the \\windows\ directory for wscript.exe and
\\windows\command directory for cscript.exe. See the
site for further details.
The idea is to run a script (Example script below)
from Forte using the OperatingSystem.RunCommand and
redirect the output like this:
c:\windows\command\cscript.exe //nologo example.js >
example.ini
This will produce something like the following:
[FORTE]
ForteRoot=c:\forte3L2
ForteNsAddress=host.name:5000
ForteModelNode=developer-node
The redirected file can then be read and parsed.
Viola! You can access the registry. Afterwards the
file can be discarded.
In my implementation I am going to keep a file
similiar to the example file in a database so I don't
need to modify code if I change the script (although
it is hard to get away from that) and I can deploy the
script to any node I wish (a big plus). You could
potential deploy the cscript.exe file in the same way
if you are worried about it not being installed on the
target machine.
For my purposes I did not spend the time to create
classes designed to handle this process (i.e. retrieve
script, write script to file system, execute script,
read and parse results, etc.) but it certainly is not
out of the realm of possibility.
Well that's about it. Write me if you have any
questions.
Samer Kanjo
What Technology
skanjoyahoo.com
Keywords: Registry
--------------- START EXAMPLE SCRIPT ---------------
// File: example.js
// Read and echo some of the Forte environment
variables. Any registry keys can
// be accessed. Try it.
// Note: HKCU = HKEY_CURRENT_USER
// Run: c:\windows\command\cscript.exe //nologo
example.js
var WshShell = WScript.CreateObject("WScript.Shell");
var forteRoot =
WshShell.RegRead("HKCU\\Software\\ForteSoftwareInc\\Forte\\FORTE_ROOT");
var forteNsAddress =
WshShell.RegRead("HKCU\\Software\\ForteSoftwareInc\\Forte\\FORTE_NS_ADDRESS");
var forteModelNode =
WshShell.RegRead("HKCU\\Software\\ForteSoftwareInc\\Forte\\FORTE_MODELNODE");
WScript.Echo("[FORTE]");
WScript.Echo("ForteRoot=" + forteRoot );
WScript.Echo("ForteNsAddress=" + forteNsAddress);
WScript.Echo("ForteModelNode=" + forteModelNode);
---------------- END EXAMPLE SCRIPT ----------------
Kick off your party with Yahoo! Invites.
http://invites.yahoo.com/Thanks for you reply but I'm still a little lost with the reply.
What is the rest of the commands?
I understand this will query the registry, but what about searching for "LT or DT" and the IF/GOTO Commands?
reg query HKEY_LOCAL_MACHINE\SOFTWARE\IS_DEPT\Simage\HW\Platform
I think my confusion is how to define LT or DT as the variable. I keep finding %errorlevel% variable, but that seems to only define on (1) or off (0)
Here's what I have so far and I dont' think it's correct.
reg query HKEY_LOCAL_MACHINE\SOFTWARE\IS_DEPT\Simage\HW\Platform /f
if "%ERRORLEVEL%" == "LT" GOTO HOME
if "%ERRORLEVEL%" == "DT" GOTO NOOOOPE
Maybe you are looking for
-
TDMS: is it possible to use sender and receiver client within the same SID
Hi all I have a general question about TDMS: i always read that it is possible to refresh data from a productive system/client to a test system/client, e.g. PRD100 => DEV100. But is it also possible to refresh data from one sender-client to the recei
-
Authorization error while regestring developer in SSCRkeys
Hi All, iam trying to register developer in SSCR keys to generate acess key . iam getting authorization error How to Register SSCR keys authorization. pls help me out .... solutons appreciated John
-
To delete and insert a new key figure in the cube
Hi Experts... How can I delete a key figure and insert a new key figure into a cube with data...? Should I be creating a new cube with the new key figure ? Thank you.. Manohar....
-
Balance carry forward at end of page in adobe forms
Hello all, I am new to adobe forms. I have a table with data with amount column. when the content of the table flows to next page i need to get balance carry forward and page to total and same at next page top as below I got to know we need to write
-
Serial Number not accepted by Lenovo Support/Warranty Lookup
Trying to e-mail support about my G505s but it will not accept my SN as valid despite the fact I bought it from a reputable retailer. Lenovo Solutions can't access my warranty information, either. Help?