Production Order Component configuration

Greetings Experts,
On the Production Orders created, we want to be able to change the component (delete existing & add a new one) to a configurable one. Hence the need to be able to configure/edit char values for the newly added component.
I know standard SAP does not allow this, anyone in their experience knows if this is possible in DIMP/IS Mill function?? We are using the IS-Mill function. Even if not possible with standard, is there a way to open up the configuration via an enhancement?
Thanks

Hello,
Thanks, but the problem is not with the Planning run.
Display of dependent requirements in MD04 is the Problem..
For eg.,
A is the header material and B is the component.
For the Production Order of A, the component quantity of B is 800mm.
in MD04 of B, the OrdRes is not shown as 800mm.
(some back ground: System is suggesting the quantity 800mm based on Object dependencies).
But in BOM of A, we have defined the quantity B as 50,000mm.
So, in MD04 of B, it is showing as 50,000mm instead of 800mm.
Thanks for your interest..
Best Regards,
Siva

Similar Messages

Batch Determination in Production Order Component Overview Screen on the basis of FIFO, Thickness, Grade, width etc.

I am facing a difficult scenario. Pl. help me out. In my Business Process I am assigning Batches in Production Order Component Overview Screen. Here I am assigning relevant batches to BOM Components manually, My Management want SAP to suggest batches automatically on FIFO basis, thickness, grade, width & first batches should automatically assign to Production order. Can you pl. tell me how to configure this scenario.
Or can I pull stock overview screen at Production Order Component screen to assign relevant batch to BOM Components
Once batches assigned in Production Order component screen cannot be changed. It can be changes by specific persons only.

Hi,
Automatic Batch Determination for production order components is possible by configuration.
You can also refer below discussions to map your scenario.
Batch determination in production order | SCN
Automatic Batch Determination in Production order
Regards,
Naresh

Production order component batch determination : Over delivery allowed in b

Iu2019m using production order component batch determination in CO02. System is not allowed to allocate an excess component split batch quantity. System is always allowed to allocate exact requirement quantity where to make open quantity is 0.
It generates the following massage once click enter after selecting an excess component quantity. My requirement is to add the excess quantity in component batch determination.
Massage details:
Quantity of batch 0052902459 is reduced to 9.300 KG as split qty > req. qty
Message no. LB034
Diagnosis
The split quantity of the chosen batch has lead to the split quantity total exceeding the required quantity.
System Response
The quantity is rounded down by the system.
Procedure
An overdelivery is not allowed by the current business transaction.
Procedure for System Administration
If necessary, check the batch search strategy to see whether an overdelivery is allowed.
I have maintained the configuration in transaction COB1 as follows to enable over delivery batch determination.
Strategy type: CO01- OrdType/Plnt/Matl
Key combination: Order type
Over delivery allowed in batch determination: Tick on
Please let me know the configuration to enable to do component batch determination with minus open quantity (Excess component quantity)

Hi,
As I understand it seems that you do not have batch split allowed in the auto batch determination for component materials. And you need to have batch split on a need to basis?
If thats true, then on the line item in the component overview. Select the item details for the Batch that has been determined (general view, there is a field for split in terms of %, change that from 100% to a the lower value you want to pick from that batch). It should then allow you to add more batches.
let me know if my assumption and answer helps.

Adding new column in production order component overview

Hi Experts,
Please let me know any enhancement or badi available to add a new column to production order component list. There is a business requirement to display the fixed bin in component list.
THanks
RIjil

Sudhakar,
Check the MRP parameter 'Individual/Coll' in MRP4 view for the components. This should be set as 2 for collective planning. If this flag is left blank then planning will be based on the parent material (If the parent material is planned for special stock then the components will also be planned for special stock)
Let me know if this helps.
Thanks,
Jaison

I have change some fields in (Production order component )

I have change some fields in (Production order component overview)

Hi,
do you want to hide or disable the fields or add new fields ??? by the way can you please let us know the transaction that you are referring to ??
Regards,
Santosh

Production Order Component Overview

Hi All ,
Could you please guide to understand the following will be grateful.
In the production order component overview screen-MENU BAR is having following list
Order, Functions, Edit, Goto, u201CCOMPONENTu201D, Environment, System, Help.
In the above, if you left click the COMPONENT option there will be drill down option, in that there you have u201CCharacteristic Value Assignmentu201D
u2022 What is the functionality of this option (u201CCharacteristic Value Assignmentu201D) ?
u2022 If I select the BOM component in the component overview and I left click the COMPONENT option in the menu bar and select the u201CCharacteristic Value Assignmentu201D what will happenu2026.
Thanks in Advance....

Hi ,
This is for the Component selection according to the Characteristic Value it will take you to Class to which Characteristics are
assigned , say if your component selection based on the characteristics value say if your Hardness of the Raw material is
99% based on that your Yield would vary for the Finished Product .
You have created MIC 's with Hardness with characteristic value 95% , 96% , 97% and 98% etc....
Your Quality lab has given test value for this component as 99% so your component selection will be this characteristic value
as master data .
Assign Characterisctics to Class , Assign class to class type 023 / 022
Regards,
Jayavimal

Default Production Order Component Long Text

Dear guru ,
Whose are the defaults for production order component long text ?
Can I copy this text only from bom ?
Can I copy this text also from material master ?
Thanks

Hi,
The defaults are from the BOM item text 1 & 2. POTX1 & POTX2 fields.
I suppose no option from material master.
Hope this helps
Regards
Raju

PRODUCTION order material configuration info

HI,
any one please let me know how can i get production order material configuration information.from which table we can get this info or is there any function module
to get this info.
Thanks & reagrds..
Anil.T

check this include Program , u will find out list of FMS
<b>LCOOCCUXX</b>
regards
prabhu

Production Order Component long text

I'm an ABAPer trying to find the long text of a production order component.
I'd expect to find it as a text with object "AUFK" id "MATK" but that's not the case. I can't find it anywhere in table STXH where it would show up if it were kept like any other text. So where is it kept?

Whenever you maintain a Production Order Text in CO03, system generate a unique HEADER details for that particular text with unique values of fields-Text Name, Language, Text ID & Text Object.
You can see 4 unique values by first double clicking on Production Order Long Text and then Goto --> Header.
Once you've these values, run FM- READ_TEXT (transaction-SE37) and put Text Name, Language, Text ID & Text Object at required places and execute, you will get desired Accounting Text.
Regards,
Anup

FM or BAPI for production order component split batch

Hi,
I'm trying to split a production order component quantity into batchs with FM or BAPI.
Using BAPI_ALM_ORDER_MAINTAIN i can create or modify components but i can't set field split batch flag SPLKZ and reference SPLVR.
Can you help me?

In standard product order process in CO02 when i split material with standard function I obtain several lines. These new lines refer to the originale one by fields SPLVR and SPLKZ.
Eg. In operation 0010 i've 10 PC of MATERIAL1
Item
Material
Qty
Batch
Batch Key (SPLKZ)
Itm no stock (SPLVR)
0010
MATERIAL1
10 PC
In CO02 i take MATERIAL1 from BATCH1 and BATCH2 the final result is
Item
Material
Qty
Batch
Batch Key (SPLKZ)
Itm no stock (SPLVR)
0010
MATERIAL1
1
1
0010
MATERIAL1
7 PC
BATCH1
2
1
0010
MATERIAL1
3 PC
BATCH2
2
1
So I'm trying to reproduce this standard behavior with BAPI or FM.
Thaks

Function about production order component material

WHO can tell me the function about production order component material?
When import production order number , the function export tables about component material.

Hi!
you can use FM CO_SF_RESB_READ
or directly from RESB table
select single rsnum into lv_rsnum from AFKO where aufnr = aufnr.
SELECT * FROM resb INTO TABLE lt_resb WHERE rsnum =lv_rsnum AND xloek NE 'X' .

Production Order - Variant Configuration of Components

Hi experts,
I want to book a part (which is on stock with serial number and variant configuration) into a production order with movement type 261-E.
However, there I get the error message that the configuration does not match.
If I compare the configurations, one is empty - I guess the one from CO02.
How can I add the configuration to CO02-components?
Kind regards

btw, it is a production order without a material number itself (a kind of repair order, on which we book the parts of repair).
And one of that part is a component which is serialized and having a variant configuration.
And I have to add the info, that I don't have the part in the BOM/routings. I have to add different components per production order.
Kind regards

Storage Location in Production Order Component Overview

Hi All,
When creating a Production Order using CO0, the Component Overview will list out the corresponding BOM for the Finished Good. We have defined a number of plants and storage locations. I see here that the plant and storage location is automatically determined in the components overview. I would like to set defaults for these, may I ask where in SPRO is this configured?
Thanks in advance

Hello
Storage location in production order is pre-setting in bom component level/and MPR2 view,
First priority is Bom Component level, i will transfer Production order only this BOM if maintianed here.
second priorty is Material master date in MRP2 view, it will effected all components and all bom which used this components.
Benny

Material to be produce included in production order component review

Hello gurus, i have a issue about production order.
1. The BOM of XXXX material have the next components:
    A
    B
    C
2. When i create a production order for 100 ST of XXX material, the component review in production order includes the next:
Position Material Quantity
0000      XXXX        100 (row blocked)
0010     A                  20 ST
0020     B                   1.5 KG
   0030    C                    10 ST
3. I don´t know why the component review in production order includes the position 0000 and blocked. It looks like the BOM of XXXX material have a recursive position, but isn´t real.
Please, help me with this issue
Regards,
Johnny Leguia

The issue was solved.
The co-producto indicator in a BOM position makes that all co-product materials (that hace co-product indicator in mrp view) were listed in component overview. The material to be produced had this co-product indicator in mrp view.
Thanks for help.
Regards,
Johnny Leguia

Special stock indicator in Production Order Component overview

Hi Team,
I have one finished product , for which i have created BOM . It has only one component in it .
Now i am creating a Sales order , based on the definition and requirement set , system is creating a production order in background.
When i go to production order and see components overview screen , there is one field special stock . This is getting filled with '1' - Individual customer stock always.
Even though we have stock in storage location , it is expecting components to be in Sales order stock .
If i create a stand alone production order for same materials , there is no special stock indicator set in components .
Can any body let me know how is this special stock field getting populated and what settings has to be reviewed in order to supress the same.
Thanks,
sudhakar

Sudhakar,
Check the MRP parameter 'Individual/Coll' in MRP4 view for the components. This should be set as 2 for collective planning. If this flag is left blank then planning will be based on the parent material (If the parent material is planned for special stock then the components will also be planned for special stock)
Let me know if this helps.
Thanks,
Jaison

Production Order Component configuration

Similar Messages

Maybe you are looking for