Professional tax grouping change in mid of the year

Dear All,
In my company, i have to change professional tax grouping in mid of the year for few personnel area.
For the month of april, may and june professional tax deducted as per the gujarat state and from july onwards it should be deduct as per the maharastra state. I have assigned the maharastra state professiona tax grouping to that personnel area in table V_7IN0P_PTX. Now my issue is that when i run  the july payroll, system calculate the professional tax carry forward of previous months.
could any one provide the solution for the same.
Thanks,
Jyoti Patel

Hi Jyoti,
Look into the config. of following tables.
V_T7INP1
V_T7INP3
V_T7INP4
What you are getting the professional tax deductions in the july months simulation run.
if any..let us know.
V sai.

Similar Messages

  • Tax group change

    Hi people,
    I have more than a thousand items in the Bread Department to change their tax codes from 'E1' to 'Z1'.
    I believe i can do the same with a query, but am not quite sure of the right syntax to use since the query must involve linking OITM and OITB. Any solution will be very much appreciated. Thanks in advance.
    Regards,
    Henry

    hi henry,
    In which transaction(sales order/purchase order etc..)
    you will like to change the tax code ?
    Jeyakanthan

  • JE Tax Group

    Hi
    In the Tax group I have C1, P1 and S1. This is the order as it display in Administration > Setup > Financial > Tax > Tax Group.
    I have defaulted tax group in G/L Account  Inventry to P1 ( Chart of Accounts >   Assests > Inventry > Account Details > Default VAT group as P1 )
    But every time I add Inventry G/L acount and it select C1 as the default tax group in jearnal Entry.
    Is there any way to change the default value. I am using SAP 2007 A.
    Thanks
    Sanjaya

    Hi Sanjaya,
    I had checked your query in SBO 2007A PL:46.
    I tried the same kind of scenario - mapped a Default VAT Group for a G/L account and selected this G/L account in journal entry along with "Automatic Tax" option checked.
    In the Tax Group of Journal entry automatically the defaul VAT Group that I have set for the G/L account only comes.
    Is there any thing I missed to understand your question?
    Best Regards
    Satish

  • Bihar State Professional Tax Configuration

    Dear Experts,
    I need to configure PT deduction configuration for our Bihar Business Area (Personnel Sub Area). Please provide me the documentation.
    Regards,
    Aruna.

    Dear Aruna,
    Thanks for posting your query in SCN 
    Please check the SAP Note-1642750 for Manual steps to configure Bihar Ptax.
    Manual Steps for implementing Professional Tax for Bihar:
    Maintain customizing entries for following views:
    1. V_T7INP1- Professional Tax grouping details
    2. V_7IN0P_PTX- Personnel Area/ sub area grouping for professional tax
    3. V_T7INP4- Professional Tax slab amounts
    4. V_T7INP3- Methods and Form Layout for states
    5. T596F- HR- Subroutines
    Step 1: Maintain PTax grouping for Bihar State.
    IMG Path: SPRO->Payroll->Payroll: India->Professional Tax-> Define Professional Tax Grouping Details
                                                                      OR
    Execute transaction code: ‘SM30’
    In View/Table specify the name as ‘V_T7INP1’ and click on Maintain button. Maintain new entries and ‘Save’ the data.
    For example, in our system the case is replicated as shown below:
    Here PTgrp (PTax Grouping) for Bihar is ‘21’.
    Step 2: Assign PTax Groupings for Personnel Areas and Subareas.
    IMG Path: SPRO->Payroll->Payroll: India->Professional Tax-> Assign PTax Groupings for Personnel Areas and Subareas
                                                                  OR
    Execute transaction code: ‘SM30’ In View/Table give the name as ‘V_7IN0P_PTX’ and click on Maintain button. Maintain new entries
    and ‘Save’ the data.
    For example, in our system the case is replicated as shown below:
    Here, IN19 is the personnel area for Bihar and personnel subarea is 0001 which is assigned to PTax group 21 defined in step 1.
    Step 3: Maintain Professional Tax Slab amounts:
    IMG Path: SPRO->Payroll->Payroll: India->Professional Tax-> Assign Amounts for Professional Tax Deduction.
                                                                OR
    Execute transaction code: ‘SM30’
    In View/Table, specify the name as ‘V_T7INP4’ and click on Maintain button. Maintain new entries and ‘Save’ the data.
    Here, PTax slabs are maintained along with the deduction amounts:
    SLAB CODE S. NO. RANGE END                            PTAX AMT             CRCY
    BH01               1      299.999,00                                     0,00                     INR
    BH01               2      499.999,00                                  1.000,00                  INR
    BH01               3      999.999,00                                  2.000,00                  INR
    BH01               4       9.999.999,00                              2.500,00                  INR
    For example, in our system the case is replicated as shown below:
    Step 4: Maintain Methods and Form Layouts for States
    IMG Path: SPRO->Payroll->Payroll: India->Professional Tax-> Maintain Method and Form Layout for PTax Groupings.
                                                                     OR
    Execute transaction code: ‘SM30’ In View/Table, specify the name as ‘V_T7INP3’ and click on Maintain button. Make new entries as shown and ‘Save’ the data.
    Step 5: Maintain Methods and Form Layouts for States
    IMG Path: SPRO->Payroll->Payroll: India->Professional Tax-> Maintain Method and Form Layout for PTax Groupings.
                                                               OR
    Execute transaction code: ‘SM30’.In View/Table, give the name as ‘T596F’ and click on Maintain button. Maintain new entries and ‘Save’ the data.
    All these should be done in DEV client and Transport request to be moved to QAS/Test client for Testing. Once testing is successful,  move it to PRD.
    Hope it helps
    In case of any further queries, Please let me know.
    Regards,
    Niladri

  • Tax & WHT change - effect

    hai,
    How do change the  Tax & WHT % in mid of the year due to Govt new implication?
    govind.

    Hi Rajesh,
    The Change of tax code wont have effect on accounting.
    Suppose if u took noncreditable tax code while service entry sheet, your material would be debited by the total amount including tax.
    If u change the same to creditable in MIRO, then the material gets credited by the tax amount and the G/L account against the tax code gets debited by that amount.
    U can simulate the effects of the same in ur development system and check it out.
    Regards,
    Sourabh

  • Unable to calculate required tax using compounding tax codes in a tax group

    Dear All,
    My requirement for an ordered item (Sale order/Invoice) is to apply VAT on "discounted price" and then apply advance tax on "sum of List price and VAT calculated before".
    Example:
    List Price=100;
    Net selling Price after 10% disount=90;
    VAT Rate:16%;
    Adv. Tax Rate: 0.5%
    I have performed following steps for this:
    Separate tax codes made for these taxes For VAT-used taxable basis="after discount", whereas for Adv.tax="before discount",
    and then assigned these codes to a tax group to be applied to the oredered item.
    But system is not calcuating adv. tax as per my requirement and rather applying rate on "sum of discounrted price and VAT calculated before".
    Kindly provide the workaround for this.
    Regards,

    Dear All,
    My requirement for an ordered item (Sale order/Invoice) is to apply VAT on "discounted price" and then apply advance tax on "sum of List price and VAT calculated before".
    Example:
    List Price=100;
    Net selling Price after 10% disount=90;
    VAT Rate:16%;
    Adv. Tax Rate: 0.5%
    I have performed following steps for this:
    Separate tax codes made for these taxes For VAT-used taxable basis="after discount", whereas for Adv.tax="before discount",
    and then assigned these codes to a tax group to be applied to the oredered item.
    But system is not calcuating adv. tax as per my requirement and rather applying rate on "sum of discounrted price and VAT calculated before".
    Kindly provide the workaround for this.
    Regards,

  • Consolidation group change: Balance sheet/income statement balance 14,560

    Dear All,
    While performing the consolidation group change task, system throws the error message :
    Balance sheet/income statement balance 14,560,497.62- INR
    Message no. UCD1011
    Diagnosis
    The document to be posted is not completely in balance.
    Entries involving items of the balance sheet or the income statement must always have a zero balance to ensure that both the balance sheet and the income statement are balanced, respectively. This is not true in this case.
    System Response
    Entry cannot be posted.
    Procedure
    Correct the amounts for the balance sheet items and/or income statement items.
    I have checked the COI Settings and not showing any error.
    I have analysed the problem and found that system is not picking one FS item 107501 i.e Profit and Loss CY.
    Can any one suggest me how to resolve this.
    Thanks in advance.
    G Vinod

    Hi DAN,
    i ll elaborate what i wanted to convey.
    When we upload
    1. TB Equal to ZERO
    2. Net of BS items may not be equal to ZERO
    Eg: if September 2010 (FY is April to Mar) file is being uploaded, the profit till the period September will be in PL items. so to the extent of profit element will be the difference in BS Items.
    when u run profit calculation task, after data upload and validation, system will pass the following entry,
    In case of Loss:
    BS - Profit and loss - CY  -           Dr
    PL-  Profit  before MI         -          Cr
    BS- BS Clearing A/c                     Cr
    PL - PL Clearing  A/c                    Dr
    when u run PCC, system ll pick these two items *BS - Profit and loss - CY and BS- BS Clearing A/c. so obviously, posting cannot be done.
    Please tell me if u still not understand
    Thanks and Regards,
    G Vinod

  • Looking for setups on Withholdings Tax groups for Suppliers

    Hi to All,
    Can anyone shed some light on the setups needed to create a new Withholdings Tax Groups for suppliers.
    Thanks

    Hello,
    <= For Oracle R12 =>
    To create a new WH tax group, u will need 1st the tax code with your a Tax Authority already setup in Supplier page:
    AP Setup > Tax > Withholding> Codes
    Then navigate to:
    Setup > Tax > Withholding> Groups
    where you attach the tax code u created above.
    After these setup, go to any supplier --> Tax Detail page and assign the tax group at both header and site level.
    Hope this answer your question
    Vik

  • There is no Professional Tax deduction showing

    There is no Professional Tax deduction showing.
    Regards,
    Ninad

    Check the configuration tables V_T7INP* you will get an idea and maintain a valid record in IT0588 with sub type 0003 then check.
    Regards
    Venkatesh

  • Standardizing entries:Consolidation Group Change

    Hi,
    We have document type of posting level 12, to reverse the document type of posting level 10 (standardizing entries) when consolidation unit change the group or leaves the group.
    When group change task is executed, the balance becomes zero.
    However, when balance carryforward is executed, the Document type of posting level 12 is not carried forward to next year. This results in balance appearing in the accounts where postings were madeat posting level 10 in the last year.
    Please advise.
    Regards,
    UR

    Can you confirm you see the PL10 entries if you run a list of totals records, standard reporting logic, and the consolidation group where the entity previously existed? 
    If you have PL10 balance sheet activity for 00 - 03/2007 and divest in 04/2007, the system books the PL12 in 04 to write down these balances.  In the "Standard" reporting logic, the system will look for all 00, 01, and 10's for company XYZ between 00/2007 and 04/2007 --> those are the dates when the company was a member of the consolidation group.
    When you do a BCF to 2008, the PL12 should not carry forward.  When reporting on 01/2008, for example, "Standard" logic will see that company XYZ was divested in 04/2007 and will look for any postings related to that company.  The PL12's are only needed during the year in which the company was divested.
    Note that you can keep feeding balances to the company and the system will keep booking intercompany eliminations, etc.  But as long as you have the master data and AFD set correctly, that company should not appear in the consolidated reports.
    - Chris

  • Consolidation Group Change and Consolidation Activity

    Hi Experts,
    I am new in SAP consolidation, I have a question regarding the difference between the function "consolidation group change" and "consolidation activity".
    If I read in the sap library, these 2 functions are separated, but if I look at the content, I saw some similarity where the consolidation group change also included the investment activity like acquisition and divestiture.
    Could anyone explain what are the difference between these 2 function?
    When I was a user, if the group acquiered a new cons unit, I just add a new cons unit in the consolidation group hierarchy, assign consolidation method, add the additional financial data for the ownership percentage (activity = first consolidation), enter the reported financial data, run CI function and add one more column in my report painter.
    When I read SAP library, I saw the "consolidation group change" function talking about the consolidation activity, now I wonder, what are the difference? What is the business scenario for using the "normal" CI activity and the "consolidation group change"? Please anyone advise. Thank you.
    regards,

    Normal C/I is a regular acquisition or divestiture.  Cons Group Change could be movement of a company from one consolidation group to another (i.e., parent A sells company 1 to parent B).  Or you own a company 20% and purchase an additional 60% and must switch accounting technique from Equity to Purchase.  BCS will need to book Cons Group Change entries to account for the acct technique change.  (In the past, at 20%, you would only book equity pickup, or equitization entries, to the parent as PL30 adjustments in the CoI.  Now you must bring in the complete balances of the company due to purchase method of consolidation.  BCS books consolidation-group specific adjustments to do this.)
    Example....
    "Normal C/I activity"
    New company A needs be consolidated in Cons Group 1 starting in 03/2007.  Add the company to the Cons Group master data, set the accounting technique, update additional financial data w/ activity First consolidation and load data for the new company.  Run COI
    "Cons Group Change"
    Company A is consolidated in Cons Group 1, but starting in 06/2007 they will be sold to a parent in Cons Group 2.  Update the Cons Group master data...setting company A to divest in 06/2007 from CG1 and to First Consolidate in CG2 starting in 06/2007.  If using Org Change logic, create an Org Change number and define a sender/receiver relationship for CG1 --> CG2.  In additional financial data, create a total transfer activity w/ org change logic from CG1 to CG2.  Run Org Change task and BCS will zero out balance sheet related to company A in CG1 on posting level 02/12/22.  In CG2, similar postings will book "catch up" entries in 06/2007 to bring full balance sheet into CG2.  In CoI, company will be transferred to new parent.
    Hopefully that makes sense...
    Chris

  • Preview: In a group of PDF files in the same window, going to the next or a previous PDF file displays the bottom of PDF by default, not the top. How do you change this?

    Preview: In a group of PDF files in the same window, going to the next or a previous PDF file displays the bottom of PDF page by default, not the top of the PDF page. How do you change this? In Mac OS 10.9 and previous, going to the next or previous PDF file displays the top of the PDF by default. Is there a way to change this back? When I go to the next or previous PDF file, I want to first view the top of the page, not the bottom. This really doesn't make any sense. Any help? Thanks!
    MacBook Air (13-inch, Mid 2012)
    2 GHz Intel Core i7
    8 GB 1600 MHz DDR3
    500 GB Flash Storage
    Preview Version 8.0 (859)
    Mac OS 10.10.1

    That to me seems like a bug in Yosemite.
    Apple Feedback http://www.apple.com/feedback/
    Bug Reporter https://bugreport.apple.com/

  • Issue on Changing the Payroll Area in Mid of the Month from Biweekly to Mon

    Dear Experts,
    I have an issue on payroll area which is changing from biweekly to monthly in Mid of the Month.
    One employee was retired on 29th of March, so his payroll area was changed from biweekly to monthly on 29th. For retire we are running the payroll on 8th of every month. When we are running payroll for April he has received only 29th and 30th retire salary, by the time he is not yet retired also.
    In this case the main problem is monthly payroll time is early then biweekly. so the employee is getting retire salary then his regular pay.
    Can you guide me where we can control that monthly payroll area should not be triggered at this movement.
    Thanks
    Chandra

    Hi Dilek,
    If splits will be there definitely there will be two wagetypes but the amounts they'll have will be based on the rates of those periods.
    Suppose an employee got payscale increase on 11th of  the month, then employee will be paid at the rate of first payscale for first ten days then @ of second payscale on second 20 days.
    So there won't be any inconsistency.
    Regards,
    Tomesh

  • LTA is getting Double when EE changes Department /Designation in mid of the

    Hi Sapiants,
    LTA amount is getting Double when EE changes Department /Designation in mid of the month. what is the reason behind this problem.
    Regards
    vinmax

    Dear Delik,
    Now double appearance of LTA amount is gone by assigning the spec . to Pr.Cl. - 06 .Your answer helped buddy in this egard. but a new problem is coming. system is populaating some amount with a wagetype. though it is not part of IT 0008.
    Thanx
    Vinmax
    Edited by: kvin kvin on Jul 25, 2008 12:28 PM
    Edited by: kvin kvin on Jul 25, 2008 12:29 PM

  • My client current process shift amount is prorating.   Now my client requirement  employee change shift (SE20321D)   to normal (NSO70012) in the mid of the month employee will get shift  full amount,

    Hi Experts,
    Please help me to solve this two issues
    I will give you clearly about my client requirement
    in the current system (existing)  already configured  for shift allowance.
    shift allowance for executive
    Shift Allowance Rates
    2 shift
    3 shift
    RM  240
    RM 330
    shift allowance for non executive
    Shift Allowance Rates
    Category 1
    Category 2
    2 shift
    3 shift
    2 shift
    3 shift
    RM  180
    RM 280
    RM 95
    RM 130
    they are not maintained (there is no any key)   in info type 0014 or info type 0015  they earliest hr consultant  copied to  the Shift Allowance wage types :- 5533, 5534,5535,5536,5537,5538and 5559
    Note : 5533 & 5536 are for Payment.
    Other wage types are for calculation purposes only.
    And they modified (standard LAP9)  YAP9 (copied)  schema written pcr  for shift allowance
    The pcrs are YSH1,YSH2,YSH3,YSH4,YSH5,YSH6,YSH7,YSH8,AND YSHF
    1) So my actual my client requirement (Issue 1)
        In my client current process shift amount is prorating.   Now my client requirement  employee change shift (SE20321D)   to normal (NSO70012) in the mid of the month
    employee will get shift  full amount
    2) client requirement (Issue 2)     Shift Allowance become prorate if the Action (Info type 0000)  in the same month have changes. (Depand the action type)
    Actions are
    WA,WB,WC,WD,WE,WF,WG,WH,WI,WJ,WK,WL,WM,WN,WO,WP
    XO,X1,X2,X3,X4,X5,X6,X7,X8,X9.
    XA,XB,XC,XD,XE,XF,XG,XH,XI,XJ,XK,XL,XM,XN,XP,XQ,XR,XS,XT,XW,XX,XY,XZ.
    Y0,Y1,Y2,Y3,Y4,Y5,Y6,Y7
    YA,YB,YC,YD,YE,YF,YG,YH,YI,YJ,YK,YL,YM,YN,YP,YQ,YU,YV,YW,YX,YY,YZ
    Z9,ZY
    Example
    in same month employee changed action on 20.07.2014
    Kindly help me to solve this issues  feel very happy for your help.and if you need any information about issue please let me know i will share to you.
    Thank you
    Raamarao

    Try this, it works very well for me.
    import XMonad.Hooks.ManageHelpers (composeOne, isFullscreen, isDialog, doFullFloat, doCenterFloat)
    myManageHook = composeAll. concat $
    [ [ className =? c --> doCenterFloat| c <- floats]
    , [ resource =? r --> doIgnore | r <- ignore]
    , [ resource =? "gecko" --> doF (W.shift "net") ]
    , [ isFullscreen --> doFullFloat]
    , [ isDialog --> doCenterFloat]]
    where floats = ["sdlpal", "MPlayer", "Gimp", "qemu-system-x86_64", "Gnome-typing-monitor", "Vlc", "Dia", "DDMS", "Audacious", "Wine"]
    ignore = []
    myLayout = tall ||| Mirror tall||| Full ||| tab ||| float
    where
    tall = named "Tall" $ limitWindows 4 $ minimize $ Tall 1 (3/100) (1/2)
    tab = named "Tab" simpleTabbedBottom
    float = named "Float" simpleFloat
    main = do
    myStatusBarPipe <- spawnPipe myBar
    conkyBarProc <- spawnPipe conkyBar
    trayproc <- spawnPipe myTrayer
    xmonad $ ewmh $ withUrgencyHook NoUrgencyHook $ defaultConfig {
    terminal = "urxvt"
    , manageHook = manageDocks <+> myManageHook <+> manageHook defaultConfig
    Last edited by helloworld1 (2012-08-14 05:20:56)

Maybe you are looking for