Profit center clearing accounts line item display

Dear all,
I have implemented document splitting at profit center level.
The zero balance clearing account (profit center clearing account) is open item managed and also line item display tick is put. eg both ticks are active.
I am trying to see the line items in the account using fbl3n,fs10n etc but am not able to view the line items althought the balance of the account is visible in fs10n.
the message i get is 'no line item selected'.
Pl suggest some way through which i can see the line items of the profit center clearing account.
Regards,
Rishikesh

Dear Venkatesh
I am also facing same problem, I am using T Code FAGLL03 to display Line Items for Zero Balance Clearing A/c but I am not getting line item display instead it is giving following error.
=========================================================================
Account 141010, company code VALC is clearing account
Message no. MSITEM111
Diagnosis
You have stored account 141010 in company code VALC as a clearing account. At the same time, you use line item management with this account.
System Response
Error message issued because line item display cannot read data for an account in a ledger if line items exist partially in the entry view together with clearing items for which there are no line items. In such cases, only the data with line items would be selected.
Procedure
Check the Customizing settings or account control. Change the settings so that only automatic postings without line items can be made to the account, or select a different account as the clearing account.
=========================================================================
Please do suggest me.
Thanks in Advance
Regards
Ratnakar

Similar Messages

Profit Center Clearing Account Line Item not possible to display ?

Hi
All Experts ,
I want to see the line items for Profit Center clearing account ( Zero Balancing ) in FS10N but after double clicking in system
shows no line item possible for this account.
Please suggest some T.codes or reports through which I can see line items for Profit Center clearing account.
Is there any different configurations made for Profit center clearing account ?
Regards,
Sharvari.
Edited by: Sharvari Joshi on Jul 18, 2009 2:27 PM
Edited by: Sharvari Joshi on Jul 18, 2009 2:32 PM

Dear Sharvari,
You are not able to see line items because "line items" field in master record must not have been selected. To check it goto
FS00, enter your GL account. For documents which have already been posted, you will not be able to see line items even after selecting Line Item in master record.
To veiw the line item record for this GL account use table BSEG in SE16.
Regards,
Chintan Joshi.

Profit center in Customer Line item display FBL5N

Hi All,
when we post to the customer, at the customer line item we cant enter any profit center (as there is no field to input). But at the postig to GL (line item 2) we have the profit center to key in .
But when using the standard report FBL1N, we have the field Profit center In the change layout.... Why is this provided. Does when we post to the GL line item with profit center , is it copied to the filed ?
Is there any configuration missing or need to be done.
Please advise .........
Best Regards
st

Hi ,
When you use PCA the idea is to capture revenues and profits on P&L accounts and by assigning some balance sheet accounts in config.
subsequently for AR and AP accounts you do the periodic transfer and that is when you assign the Profit Center based on the ofsetting entry.
As per SAP you cannot have a profit center at that point of time since a billing document can have multiple lines/multiple profit centers where as on line to the vendor/customer.
Let me know if you need further explanation.
Thanks,
Praveen

Segment Clearing A/c (GL account)-Line item display

In our case new GL is active with segment clearing scenario. The Segment Clearing A/c (GL) is maintained as line item display and open item. However, when we view it from FS10n, period-wise balance is there but when we click on, no line item drill down is not displayed. What is the solution to get line item display ?

Hi,
When you create Segment clearing account, line item display should not be ticked in FS00, only then you will be able to see the line item display.
There is a standard SAP not also on this issue. I dont remember the note but you can find it in service.sap.
You also do not need to keep it open item managed.
Regards,
SAPFICO

Profit Center in Vendor Line Item

Hi
We have implemented SAP ECC6 - EHP4 and activated Document spliting and Profit Center field is mandatory.
Now we need to debit a Vendor and Credit another vendor ( new line item), when we try to post the document
we are getting error "balance in profit center", whereas we are not able to enter the Profit center during document entry.
Can we get help on this please.
Regards
Chandrasekaran A

Hi,
Profit Center field is not available for input in vendor line items.
There are other options available:-
1. To assign a default profit center to the vendor reconciliation account in (SPRO> Financial Accounting (New)> General Ledger Accounting (New) > Master Data > Profit Center > Assign Default Profit Center to Accounts)
Or
2. To create a substitution in OBBH for populating profit center in vendor line item.
Or.
3. If 1 and 2 does not meet your need, to use a BAPI BAPI_ACC_DOCUMENT_POST to posting the vendor documents via a custom program.
Regards,
Gaurav

How to take Profit Center Wise (Customer Line item & fixed assets)?

Profit Center Wise (Customer Line item & fixed assets)
GL Report: S_ALR_87012282 (Profit Center wise GL A/C Line item)
AP Report: S_ALR_87012103 (Profit Center wise Vendor A/C Line item)
Similar for I want customer line item wise and fixed asset line item (profit center wise) report, S_ALR_87012197* this for customer line item wise report but,Here in the dynamic function there but not available in profit center, I need report what t.code available in profit center wise customer line item and fixed asset line item.
Thanks in advance
Selva

Hi Sweta
For obtaining profit center wise receivables/payablees and stock reports, you may need to follow these steps at every period end.
1. Execute F.5D - Calculate Balance sheet adjustment
2. Execute 1KEK - Transfer Payables/Receivables
3. Execute 1KEI - Transfer Assets
4. Execute 1KEH - Transfer material stocks
5. Execute 1KEJ - Transfer Work in progress
For more information, you can read the heading "Balance Sheet Items in Profit Center Accounting" in the below URL.
http://help.sap.com/saphelp_erp60/helpdata/en/eb/13811243c411d1896f0000e8322d00/frameset.htm
Regards

Profit Center in Vendor Line Item (T.Code:MIRO or F-02)

Hi Friends,
We are using ECC 6 but Document Splitting is not activated.
We need Profit Center in Vendor Line Item (MIRO or F-02). How we can make this settings.
Thanks
Harani

You can use a substitution for populating the profit center in the vendor line. You can also use the user exits.
Standard way in new GL is to use the Document Splitting featuire to populate the profit center in the vendor line based on other lines.
If you are using BADI_ACC_DOCUMENT_POST, here you can fill the profit center.
Regards,
SDNer

Display Username on G/L account line item display of T-code FAGLB03

Hi Experts:
Now I have a issue,we want to display the header level username (BKPF-USNAM) on the list of G/L account line item display.What I want to ask is if there is another report existed in which contain this field? Or only change the standard code of SAP?

Hi,
In case you wish to see the User name details in the report,
go to the Report go to the Menu options - Settings Tab - select special fields and add the field name BKPF-USNAM as a special field and save it. This is a cross client settings so it gwill generate a transport request. Save it and then execute the report. You will get the desired result of displaying the user name for the report.
hope this helps
regards,
radhika

FAGLB03 and GL Account Line Item Display not tally

Hi SAP Guru,
Just wondering why our balance in FAGLB03 and GL Account Line Item Display is not tally. What could be the reason and what should I do to have it reconciled?
Thanks,
Julie

Hi,
Please check the SAP note:
Note 1223997 - Amounts incorrect in FAGLB03 navigation to FAGLL03 and FB03.
1. There is a difference between FAGLB03 and navigating to FAGLL03.
You display transaction figures of an account using FAGLB03.
By double-clicking a line, you branch to the line items.
The total of the items does not correspond to the balance.
If you drill down to the 'Debit' or 'Credit' column, certain items may not be displayed, or too many items may be displayed. This occurs in particular with negative postings, for example because a negative posting 'reduces' the balances on the credit side.
Therefore, this item should be displayed in the 'Debit' items when you navigate to FAGLL03. This does not work correctly.
Reason and Prerequisites
There is a program error or a data inconsistency
If the problem symptoms are as above, kindly check in the system whether this note has been applied.
Thanks
Aravind

Adding fields in the transaction FS10N ( G/L Account LIne Item Display

Hi all,
in G/L Account Balance Display( FS10N) once i get list display when i click
CUMULATIVE DISPLAY button it will go to G/L Account LIne Item Display list
Here i have to add CUSTOMER field (sold to party or partner) And NAME field in
the list beside G/L account and company code fileds
Please let me know how to proceed.
shall i have to do any back ground setting or
i have to copy the program in to Z program
then modify?
urgent requirement
please let me know
thanks

Hi,
For writing a substitution exit code you will need the help of your ABAPer.
Use T Code GGB1 to create a substitution. In the application Area select Financial Accounting --> Line item.
Create a substitution for your company code. Under Substitution Create Step. When you click on step it will give you a list of fields in BSEG table. Select field name XREF1 or XREF2 or XREF3 any one. In the next screen select "Exit". In the Prerequisites give conditions as BKPF-BUKRS = 1000 (your company code).
In the Substitution select your exit code against your XREF1 or XREF2 or XREF3 field.
While writing the exit code you can give the logic as select BSEG-KUNNR and pass to table KNA1. Then populate BSEG-XREF1 with KNA1-NAME1
Save this substitution and activate it in T Code "OBBH"
While writing Substitution exit copy the standard program "RGGBS000" and create your Z program. Write your new code in the Z program. This step should be done before you create a substitution. Use T Code GCX2 and maintain your Z program against Application Area "GBLS".
Also see to it that the Reference Key1 / 2 / 3 field is made optional in all the Posting Keys and Field Status Groups.
Please let me know whether this helps.
Regards,
Swapnil

Dummy profit center and profit center clearing account being used

Dear Gurus,
We are implementing ECC 6.0 and will have FI PCA.
I have 2 profit centers.(and one dummy profit center 9999)
1)RM common
2) FG1
When RM is issued to production order and order is confirmed, the goods movement are 261 and 101 respectively.
the entry at the time of confirmation is
Discription                          Profit center
Consumption of RM             9999
To RM inventory                RMCommon
FG Inventory dr                  FG1
To Factory output account 9999
What should actually happen is instead of 9999 consumption of RM should hit profit center RM common and instead of 9999 the factory output account should hit FG1.
The profit center clearing account is being used for the entry in the GL view (as opposed to entry view in accounting)
Only then will accounting treatment be correct.
I have checked field statuses of the respective accounts and they have profit center and segment as optional fields.
Can you suggest what may be wrong and where i need to change the splitting config.
Regards,

Hi
Profit Center is derived from the assignment of Profit center in material master in costing view.
In the production scenario,
Consumption of raw material Dr - PC of FG
Cr Stock of RM - PC RM
Dr Stock of FG - PC FG
Cr confirmation of production of the Finished goods - PC FG
The reason for that is the production order is created with respect to the Finished Goods, master data of the production order inherits from the Finished goods.
Regards,
Suraj

GL Account Line Item Display

Hi,
While creating a GL Account Master, 'Line Item Display' was accidently not activated, under the Control Data Tab. This was subsequently done by editing the GL Masters after postings had already been made for about two months. Thus for the period, Line Item Management was not activated, the report generated thru FAGLL03 does not give the detailed line items.
Could any one pleaase advise the T Codes to run the program for the conversion of the table such that the line items are displayed also for the period prior to the activation of Line Item Management.
Thanks in advance.

Hi follow the below transactions,
select teh line item dispaly & save the gl account
1.First you block the gl account for posting
2.Go to SE38 &execute the program RFSEPA01.
system will shoe the line items which are posted without lineitem nmanagemnt.
then unblock the gl account.
chandra
Edited by: Chandra Sekhar Reddy.Botla on Jan 3, 2008 1:17 PM

G/L Account Line item display

Hi All,
I have an incoming receipts in G/L account line item which is a paid invoice but it is in an open status. will the value of the open amount reflect in BI reports.
The value does not show in the BI report currently, is it because of the open status and needs to be cleared first or any other reasons.
Kind Regards
Niren

Hi Niren,
I think you are using partial payment, so the clearing doucment will still keep open status.
if you use residual to clear open line item, then the cleared item is changed to "clearu201C stataus, and a open line item with left amount will be generated.
Give you a example:
   40 expense 500 USD / 31 vendor   500 USD    <<< dpcument:A
1. using partial payment to clear 200 USD, the cleairng document with open status
   25 vendor 200 USD   / 50 bank   200 USD <<<<< open status. <<<document:B
   then when you clear another 300 USD, you need to select document A and document B
   50 bank 500 / 25 vendor 500 <with this clearing document, document:A and B are cleared together.
2. using residual item clearing to clear 200 USD , the clearing document is like below:
   25 vendor   500 USD<< this is for clearing the doc:A / 50 bank       200 USD
                                                                                36 vendor    300 USD <<<< left amount 300 is
                                                                                in open status
For BI report issue , it should be BW issue, it is better to ask this question in BW Forums.
Anyway you can try to clear a open line item with full amount, then confirm whether the value updated in BI report or nt.
Best Regards,
Gladys xing

Profit Center on Vendor Line Item - When other line item is Bank

Dear Experts,
We have a peculiar problem here. Recently we went live with SAP ECC6.0. On the date of migration one cheque was issued to a Vendor who did not presented the same into Bank. The Cheque is now expired and we need to pass an entry into SAP as -
Debit 40 Bank Account $100
Credit 37 Other Clearing Vendor $100
The Vendor re-invoicing cannot be done as we cannot hit the Expense GL.
The core problem is that at the time of Vendor line item we cannot manually enter the Profit Center.
We have Doc Splitting activated and Profit Centers are mandatory.
If we decide to set the default Profit Centers for the concerned Reconciliation Account ALL of the goin forward postings, would hit this default PC.
Please Help
Thanks so much.

Hi,
I think you maintained the Document Splitting settings correctly, if the system is not allowing to clear the invoice u directly enter profit center in F-53
there is a option to enter profit center
if still system is not allowing to post you post by using F-02 and take document type as KA then it will allow to save the entry. you clear the both transactions by using F-44
making the default profit centers to reconciliation account is not suggestible, if your company is having operations in one area then you can use this will be possible in IMG - controlling - profit center accounting - assign profit center
I think it may help u and be careful and take authorizations from your superiors
All the Best

Profit Center in Customer Line Item

Hi SDN,
We have created a validation during posting of Sp Gl transactions for both Vendor or Customer. This validation mandates the profit center in the Vendor/Customer line item to ensure that a profit center will be derived even for documents with purely balance sheet items (e.g. Dr AR Cr Bank Inc Clearing)
We were successfull in bringing out the profit center in the vendor line item (for Special GL transactions)
However, for customer special GL transactions, we did the same settings as with the vendor settings (updated FSG and posting key to activate profit center) but system does not show profit center field for customer sp GL transactions.
Any idea as to why only customer line item does not reflect the profit center while the vendor line item shows it?
Thanks

Hi,
What is the special GL indicator account type?
Have you changed the FSG settings for special GL account?
Rgds
Murali. N

Profit center clearing accounts line item display

Similar Messages

Maybe you are looking for