Profit centre hierarchy table!!!

hello SDN,
Could somebody please help me to find this information i need the table name i think where the standard profit centre hierarchy information is stored??
Name of the node of the next level in the structure above the Pofit centre, name of the node of the next level in the structure above the node in first level, name of the node of the next level in the structure above the node in second level.
Its a bit urgent!!
MAny thanks
Pankaj

hello thanx for your reply.
But this is not what i was looking for. Actually i am writing a interface program to download Profit centre master data and this profit centre hierarchy information to CRM program.
That is why i need the table name where i can see all the information related to hierarchy if possible.
Please provide your views / suggestions.
Thanks
pankaj
thanks Raymond i will look into these tables.
Message was edited by:
        PANKAJ ARORA

Similar Messages

  • Profit Centre Hierarchy Change and Profit Centre Budget

    Hello Friends
    For better view of Profit Centre Reports we are planing to change the Profit Centre Hierarchy.
    I wanted to know that, are there some Specific Points which we have to take care of, before changing the Hierarchy?
    Will some other settings get affected in System after changing the Hierarchy?
    Also i want to know the TCode for entering Profit Centre Budget in System.
    regards
    prashant

    Hi,
    Profit centre planning (there is no budget for profit centres) is entered via 7KE1 transaction. If you change your hierarchy you should think of the effect on your reporting and allocation processes. That is if you use certain group in your cost allocation cylce and now you change it, it might have an effect on costs distribution.
    Regards,
    Eli

  • Reading the description of Sales document type and Profit centre from table

    Hi
    I want to print the description of Sales document type and Profit center on output
    I have checked in table TVAK and CEPC  but i am unable to pick description against the code
    Can anyone please suggest from where can i capture the description of sales document type and profit centre
    Thanks and Regards
    Sunil Srinivasan

    Hi
    If you have the sales document number VBELN then pass this VBELN in to table VBAK and you can get the sales document type VBAK-AUART.
    Now pass the same VBELN to VBAP table here you can get the Profit Center VBAP-PRCTR
    For sales Document type description you pass the VBAK-AUART values into table TVAKT  table and get the values for TVAKT-BEZEI is you sales document type description
    For Profit center description goto table CEPCT and enter the profit center you will get the
    KTEXT
    LTEXT
    MCTXT
    regards
    Prashanth
    Edited by: Prashanth@SD on Oct 25, 2010 12:29 PM

  • Profit Centre Hierarchy

    Hi,
    When you do the consolidation by profit center,do you use profit center or profit center group as the cons unit?
    Thanks in advance

    Hi Herwin,
    . Is there any important relationship between 1000cons unit based on profit centre and the matrix organization/pc only?
    - In case of non-matrix you have just a number of your ConsUnits. In case of matrix you have a combination of units. I saw a holding with a couple of thousands of Companies and about 10000 profit centers. Imagine how many combination Co+PC may exist in such holding. It almost always makes BCS implementation more time- and resources-consuming.
    .which one do u recommend (matrix or management consol only)?
    - I almost answered this question yet. Management Consolidation should be much easier than a matrix one. Matrix is needed when there is a necessety to have balanced Fin Statement from both points of view: Co and PC.

  • Prompts, with Hierarchy node (profit centre) key search issue

    Hi,
    I have a report which has Profit centre Hierarchy as one of the Prompts. As in the BW it is configured with comtrolling area compounded, it appears as e.g 0006P12345 and at the Webi report level, the user needs to give not only the profit centre value in the search rather along with 0002p12345.
    Is there a way that we can do to make the user only to search using the profit centre e.g. P12345.
    This is happening for only the Base nodes. That is the way it is appearing at the BW level as well.
    please help
    Thanks
    Krishna

    Hello Srilakshmi,
    thanks for the reply. I am like doing this for the first time, can you give me step wise, if at all possible for you.
    i am now checking how I can modify Prompt properties etc now.
    Thanks in advace.
    Krishna

  • Profit center hierarchy

    HI All,
    I want to add two infoobjects (enhancements) level to the profitcentre attributes, i.e. i want to show in BEx reporting in the form of levels. It should be
    <b>Profit centre
           V
    Setname (Level2) -
    Setnode table
           V
    Profit centre group (Level 3) -
    CEPC table</b>
    and for that hierarchy i'm following the below path, but i'm confused how to write the code for the enhancements. Can anyone plz give the solution with the ABAP code.
    1.Create ZPROFITCTR infoobject which is a copy of 0PROFIT_CTR_ATTR then add level2( Division) and level3 ( Sector) as an attributes .                                                                           
    2. Copy DS 0PROFIT_CTR_ATTR to ZPROFITCTR, and add level2 and level3 fields in Extract structures.
    3. Goto user exit master data and put the code, pass the profit centre to table CEPC and then get profit centre group, that should be put in level 3.                   4. Then again goto SETNODE table, select setclass feild (0106), pass on subset name (P2759) from CEPC table (KHINR).                                                        Put Subset name ( Division)----- level 2                                         
    Subname ( Sector) -
      level 3.
    Thanks in Advance,
    Hussain.

    KCH3 ??? (I'm not so sure...)
    Thanks Bhanu !
    Message was edited by: Roberto Negro (thanking !!!)

  • Intercompany elimination at legal entity and profit centre level

    All,
    I have a question regarding intercompany elimination. As far as I understand, BPC can only hold one Interco dimension per application. If you want to perform an intercompany elimination for two dimensions which do not roll up into each other, two separate applications are needed. Please see example below to clarify:
    Data is reported the following way:
    Legal entity   Profit Centre   Account    Interco    Value
    The problem is that the profit centre hierarchy does not roll up into the legal entity hierarchy mainly because there are profit centres set up as legal entities. Consequently, the legal entity hierarchy and the profit centre hierarchy are two independent hierarchies.
    The business requirement is to have an intercompany elimination at profit centre and legal entity level at the same time (hence requiring two Intercos at the same time). This is needed as some of the profit centres are set up as legal entities.
    Can someone advise me as to how to resolve this issue? Did anyone come across a similar problem?
    Please let me know if you require any further clarifications.
    Marc

    Hi
    Try to use 2 application for the interco elimination
    for the 1st appls ur entity will be the entity dimension and use intco as intco dimension
    for the 2nd one use the profit center as entity and build a new intco
    As per interco logic this is using the Intco property in the Entity dimension and Entity property in intco dimension
    it is very impossible to do this in one application
    Thanks
    CSD

  • Can we attach cost centre to profit centre group?

    Hi all
    I would like to know whether a cost centre can be attached to profit centre group or is it mandatory to attach it to only profit centre?
    Also can i maintain profit centre and profit centre group at same level in profit centre hierarchy?
    Regards
    Smita

    Hello
    Cost center will be assigned to Profit center only not to  profit center group.  the main intention of the maintain the profit center in the cost center master data, what ever the transactions are posted to the particular profit center the same may  be posted to Profit center.
    Profit center group means, all the similar nature profit center will be clubbed under one profit center group or you can prepare the profit center groups for your reporting purposes also.
    Regards
    madhav

  • Profit Centre Allocation

    G'day all,
    Hope this finds everyone well.
    In any case, we have a scenario where 100% of revenues/expenses is initially posted to a profit center 1000 of company code A.
    This then needs to be allocated to profit center 1001 of company code B.
    Both company code are assigned to the same controlling area and uses the same cost centre and profit centre hierarchy but have different cost centre/profit centre groups.
    We will be running on ECC 6.0
    Can anyone advise as to how this can be performed?
    Should we use distribution/assessment of the classic PCA functionality? OR should we use PCA allocation within New GL?
    In either case, we are not sure how this works as we find that it is not possible to allocate revenues/expenses from one company code to another. Are we missing something?
    Thank you,
    Richard

    Hello
    I am not sure of transferring values to PC of a different CC, but check in 9KE0, maybe you will have parameters for inter CC transfer.
    Actually enter the PC of the other CC and see what happens.
    Reg
    Suresh

  • Copy cost center hierarchy to profit center hierarchy: is this possible?

    Hi,
    I would like to know or I can copy my standard cost center hierarchy to my standard profit center hierarchy. If so, how to proceed?
    Thank you in advance,
    Eric van Zundert.
    Ps. We do not have enterprise organisastional active.

    Hi Eric,
    No standard tool exists for this operation. However, if you really prefer to do it manually, you can pull a trick. You can export your cost centre hierarchy to TXT file, correct there certain parameters (change BCCSS to  BGLPCT, etc.) and then import it as profit centre hierarchy.
    Regards,
    Eli

  • Structure view "Profit center hierarchy" for Information system

    Hi Experts
    The structure view "Profit center hierarchy" is not available in standard system. I have created a new key with assignement of PS Hierarchy type '2'.
    But iam getting below message when I use this new structure view:
    Alternative hierarchy could not be determined
    Message no. OK032
    Diagnosis
    You attempted to structure your project elements according to an alternative hierarchy (profit center, cost center or summarization hierarchy). The alternative hierarchy could not be read.
    System Response
    The system uses the "Work breakdown structure" view.
    Any suggestion?
    warm regards
    ramSiva

    Ok lets start from basics
    go to CN41 and enter a project with std PS info profile 000000000000001
    if you click o the DB profile you will have basic setting 000000000000001 etc
    this gives us the project structure
    Now in transaction OPUR create a view for PC hierarchy
    Z00000000001 - whatever description
    select PS hier type 2 - Profit Ctr via set
    I think you have done this
    In this configuration there is a group name - you need to enter the profit centre hierarchy group name from your system
    this group must exist in your system check using transaction KCH3 to display group - if this is not entered correctly you will get the exact error you have got - I have been able to replicate in my system
    Now run CN41 change DB profile project view from 00000000001 to Z0000000001

  • Code for hierarchy table?

    hi
    i added attribute for profit center? now i need fill this values from profit centr hierarchy like if the profit centre is equll to profit center from hierarcy node i need update parent node name for level 3 nodes only
    what is process to follow

    written my end

  • New General ledger accounting in ECC 6.0 : Profit centre not in BSID table

    hi,
    I already create new transaction code and report from standard transaction code
    *s_alr_87012168 : Customer Aging Report (Due Date Analysis for Open Items)* and i
    also add Profit center fields into Dynamic selection.
    My problem is, if i run the report using customer account the output is displayed but
    if i run the report with customer & profit centre the output is not displayed. currently i'm using
    new General ledger accounting in ECC 6.0 and when i look into bsid table the value
    is empty for profit centre and the value for profit centre are stored in new table
    FAGLFLEXT.
    do i miss something?
    thanks.

    s_alr_87012168 : Customer Aging Report (Due Date Analysis for Open Items) this is a report generated.

  • Table for Profit centre wise G/L account data

    Hi all,
    is there any table or any function module  updating the  profit centre wise balance for G/L accounts. BSEG has profit centre but we are not prefering as it a cluster table.

    Hi,
    You can look at GLPCA or GLPCT (totals) tables.
    Regards,
    Eli

  • SQL Table Link between invoice and profit centre

    Hi,
    We are about to bulk import reserve invoices but I just need to allocate an invoice against the correct profit centre. Where is the link between sql tables?
    Edited by: Ricky Thomas on Mar 17, 2011 5:15 PM

    If you fill the profit centre on the line, the journal will allocate the profit centre to all GL accounts of Sales or Expenditure type.
    If you are using document expenses for freight, you may need to also assign your profit centre there.
    The line field is OCRCode in both the invoice lines & the expenses lines

Maybe you are looking for