Program execution date record or log

Hi:
We've been requested by Development team, to discover if there is any report or program or log that trace the date and/or time that a program has been executed.
I guess that there is not exactly a report like these, but if anyone can give us an idea of how to get these information, we will apprecciate it.
Thanks a lot, abrahamdelgadov

Abraham,
Certain information pertaining to your requirement are available in Table REPOSRC.
Try REPOSRC in SE11.
Other way is
Check the system log. Use the transaction ST03 and click on Performance database (Push button). Hit the target system and select period (you want to analyse ...this is system log and you may not be able to read if the last execution date of the transaction is more than 90 days..not sure how it is configured in your system) and click on "Transaction Profile".
This holds the complete list of Programs / transaction codes executed during last three months. Only painful thing is, we need to browse the list to nail down to the requirement.
Vinodh Balakrishnan

Similar Messages

Program execution date

Hi,
I'd like to know wether there is a utility that reports, for a given list of programs, the program name and it's last date of execution.
Thanks

Hi Anji,
I´ve searched the table TADIR using SM30 transaction. This transaction does not allow multiple entries, and I could not see the date I'm looking for in this table.
I don't know if there is any detail I'm not taking into account.
Claudio

Program to collect user u2013 transaction execution data for past period

Hi Experts
We are developing a program to collect user u2013 transaction execution data for past period ( 3 months-1 year ). We are getting required User and Tcode output but unable to find exact count per tcode ( executed by respective user).
We have following count components available in SAPWL_WORKLOAD_GET_STATISTIC / SWNC_COLLECTOR_GET_AGGREGATES
COUNT , DCOUNT ( Dialog count for transaction ) , UCOUNT , BCOUNT , ECOUNT, SCOUNT ,LUW_COUNT .
Out of which LUW_COUNT -Logical Units of Work comes close to no ot time transaction was executed but itu2019s even not the exact count as one transaction code can have more than one LUW .
Does anyone have idea about how to get the right count .
Thanks
Vani

If audit log is enabled in SM19 for transaction criteria all, you can get the transaction history executed by the users. But may need more space on audit file system if this is enabled for all users. May be you can archive once in 3 months into ZIP files and can unzip whenever you need.

Date format changes in the middle of a program execution

In my C code I have a series of select statements.
When I first get a session to the database I use the following command to set the date format
alter session set nls_date_format = 'MM/DD/YYYY HH24:MI:SS'
It works fine for a few queries. After a while during the program execution I see that the date format changes to 'DD-MON-YY' format. This results in a series of error in my code because I expect the date format to always be in the 'MM/DD/YYYY HH24:MI:SS' format.
Any idea why the date format should change all of a sudden in the middle of the program execution.

I second the idea that you should always use TO_DATE and TO_CHAR if you want to reliably convert between dates and strings.
Without seeing your code, it is hard to say why your date format is changing, but the most likely reason is that you are changing users somewhere in the code. For example:
SQL> show user
USER is "OPS$ORACLE"
SQL> SELECT sysdate FROM dual;
SYSDATE
11-JUL-2003
SQL> ALTER SESSION SET nls_date_format='dd-Mon-yyyy hh24:mi:ss';
Session altered.
SQL> SELECT sysdate FROM dual;
SYSDATE
11-Jul-2003 10:15:12
SQL> connect jtest/test
Connected.
SQL> SELECT sysdate FROM dual;
SYSDATE
11-JUL-2003TTFN
John

Itunes error. the data execution prevention pops up and says "to protect your computer, windows has closed this program. Data execution prevention helps protect against damage from viruses and other threat.

I have a windows Xp computer. and i needed to download the newest itunes to support my ipod touch. but now my computer doesn't let me open itunes. The the data execution prevention pops up and says "to protect your computer, windows has closed this program. Data execution prevention (DEP) helps protect against damage from viruses and other threat." I tried excluding itunes from DEP on settings but it still doesn't work. I don't know what to do. please help me!!!
thanks

try to select the computer cd/dvd autorun off.
I had the same problem, then Kaspersky software found a conflict suggesting me this solution.
Itunes now works...even if it always asks to set the cd/dvd autorun on when lunched.

Bad date recorded by AccessServer in Audit Log File

Hi all,
I have installed OAM and configure Audit Log File to AccessServer:
Access System Configuration >> Access Server Configuration >> and put ON "Audit to File"
The log is recorded OK, but when compare the date writed in log file with SO date, there are 6hs of diference
LOG FILE
01\/28\/2009 *00:18:07* \-0500 - AUTHZ_SUCCESS - GET - AccessServer - 192.168.3.105 - sec.biosnettcs.com\/access\/oblix\/lang\/en\-us\/msgctlg.js - cn=orcladmin\,cn=Users\,dc=biosnettcs\,dc=com - 00:18:07 - http - AccessGate - - 2
SO date
# date
mar ene 27 *18:18:15 CST* 2009
# date -u
miÃ© ene 28 *00:18:23 UTC* 2009
How we can see in this lines the audit log is recording date in UTC, but a need this in the timezone setted in SO.
How can do this (print date in audit log file with the same timezone setted by SO)??
Thaks in advance,
Julio

I response myself.
There is no way to set the Date/Time format to any other than UTC for the OAM component logs
See note 742777.1 for deeph information.
Julio.

Can any one please tell me how to write labview program for data logging in electric motor bike.

Can any one please tell me how to write labview program for data logging in electric motor bike. I am going to use CompactRIO for getting wide range of data from various sensors in bike. I need to write labview program for data logging of temperature, voltage and speed of the bike. Can any one help me?

Yes, we can.
I think the best place for you to start for this is the NI Developer Zone. I recommend beginning with these tutorials I found by searching on "data log rio". There were more than just these few that might be relevant to your project but I'll leave that for you to decide.
NI Compact RIO Setup and Services -> http://zone.ni.com/devzone/cda/tut/p/id/11394
Getting Started with CompactRIO - Logging Data to Disk -> http://zone.ni.com/devzone/cda/tut/p/id/11198
Getting Started with CompactRIO - Performing Basic Control -> http://zone.ni.com/devzone/cda/tut/p/id/11197
These will probably give you links to more topics/tutorials/examples that can help you design and implement your target system.
Jason
Wire Warrior
Behold the power of LabVIEW as my army of Roomba minions streaks across the floor!

Payment Program Creation Date and User (is this in any table in SAP R/3)?

Dear Experts!
The treasury guy asked me whether there would be a way to recover the "Payment Program" Creation Date and Created by (User) from Payment Program Executions (F110 transaction).
I searched on the REGU* tables and I didn't find out this information.
Does anybody know whether there is any table where this is recorded?
NOTE: We cannot use the information from "Proposal Log" because the log is removed from the Productive System and only the last 3 (three) days are remaining.
Thanks and Kind Regards,
Daniel Carvalho.

Hello "The Wirtschaftsmann",
Thanks for the reply. However, I need the Creation Date and Creation by of the Proposal / Payment Run steps.
Not sure if this information is available nowadays at SAP. I opened an incident with SAP, let's see what they reply to us.
Regards,
Daniel

Error out the ABAP program execution

I have an ABAP program which transfers data from a file to a database table thru function module in packages of 50,000 records.
Upon the successful completion of this ABAP program, I start dependent processes.
Sometimes the function module does not transfer the data and returns the exception back to the ABAP program - which is an expected scenario. Currently when ever an exception is received in the function module, I stop the ABAP program with a STOP statement.
The ABAP program stops, which meets my first objective. But what happens is, if you look at the job log --> it is Completed in terms of program execution and the dependent processes automatically start - which is not meeting my second objective.
My second objective is to force the ABAP program to error out in such a way that .........
1) The program execution is stopped
2) If I look at the job log it should not be Completed (I am looking for something like Cancelled so that the dependent process do not get started automatically)
Is it possible to error out the ABAP program execution by raising an exception or something, so that when i look at the job log - it shows Cancelled and not Completed?
Let me know if you have any questions.
Thanks,
RK.

Adrian,
Thanks - This is exactly what I was looking for, it works.
For some reason Messages skipped my mind and I was looking at raising Exceptions
Solution:
if sy-subrc NE 0.
message id 'abc' type 'E' number 000.
endif.
Thanks,
RK.
Edited by: RK on Jan 17, 2010 7:47 PM
Edited by: RK on Jan 17, 2010 7:50 PM
Edited by: RK on Jan 17, 2010 7:52 PM

How to transfer data in change log table of dso to z-table using abap code

Hi can you please explain me how to transfer data in change log table of dso to z-table using abap code ,with out using Function module concept

PROGRAM NAME:   ZBW_DELTA_TO_GSTAR                                 **
report ZBW_DELTA_TO_GSTAR no standard page heading
                                 line-size 120
                                 line-count 75
                                 message-id ZBW_MSG_CLS.
tables:   ZGIV_DLTA_EBV_BB,
          ZGIV_DLTA_EM2_BL,
          ZGIV_DLTA_EM2_BK.
Selection Screen Definitions
SELECTION-SCREEN: BEGIN OF BLOCK INNER WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN: SKIP 1.
PARAMETERS:       EBVBB RADIOBUTTON GROUP ROLL,
                  EM2BL RADIOBUTTON GROUP ROLL,
                  EM2BK RADIOBUTTON GROUP ROLL.
SELECTION-SCREEN: END OF BLOCK INNER.
Data: WS_UPDATE_FLAG Type C,
       UCounter(9)      Type N,
       ICounter(9)      Type N.
DATA: T_ZGIV_DLTA_EBV_BB Type Standard Table of ZGIV_DLTA_EBV_BB,
       s_ZGIV_DLTA_EBV_BB LIKE line of T_ZGIV_DLTA_EBV_BB.
DATA: T_ZGIV_DLTA_EM2_BK Type Standard Table of ZGIV_DLTA_EM2_BK,
       s_ZGIV_DLTA_EM2_BK LIKE line of T_ZGIV_DLTA_EM2_BK.
DATA: T_ZGIV_DLTA_EM2_BL Type Standard Table of ZGIV_DLTA_EM2_BL,
       s_ZGIV_DLTA_EM2_BL LIKE line of T_ZGIV_DLTA_EM2_BL.
Standard Internal Tables - Describe usage.
data: begin of i_AEPSD_O0140 occurs 0.
        include structure /BIC/AEPSD_O0140.
data: end of i_AEPSD_O0140.
data: begin of i_AEPSD_O0240 occurs 0.
        include structure /BIC/AEPSD_O0240.
data: end of i_AEPSD_O0240.
data: begin of i_AEPSD_O0340 occurs 0.
        include structure /BIC/AEPSD_O0340.
data: end of i_AEPSD_O0340.
data: begin of i_GIV_DLTA_EBV_BB occurs 0.
        include structure ZGIV_DLTA_EBV_BB.
data: end of i_GIV_DLTA_EBV_BB.
data: begin of i_GIV_DLTA_EM2_BK occurs 0.
        include structure ZGIV_DLTA_EM2_BK.
data: end of i_GIV_DLTA_EM2_BK.
data: begin of i_GIV_DLTA_EM2_BL occurs 0.
        include structure ZGIV_DLTA_EM2_BL.
data: end of i_GIV_DLTA_EM2_BL.
Miscellaneous Program Variables and Constants.
TOP-OF-PAGE
top-of-page.
START-OF-SELECTION
start-of-selection.
Clear: i_GIV_DLTA_EBV_BB,
         i_GIV_DLTA_EM2_BK,
         i_GIV_DLTA_EM2_BL,
         UCounter, ICounter.
IF EBVBB = 'X'.
    PERFORM 100_EXTRACT_EBV_BB_DELTA_RECS.
ELSEIF EM2BK = 'X'.
    PERFORM 100_EXTRACT_EM2_BK_DELTA_RECS.
ELSE.
    PERFORM 100_EXTRACT_EM2_BL_DELTA_RECS.
ENDIF.
FORM 100_EXTRACT_EBV_BB_DELTA_RECS
FORM 100_EXTRACT_EBV_BB_DELTA_RECS.
Refresh:   i_AEPSD_O0140,
             i_GIV_DLTA_EBV_BB.
Clear:      UCounter, ICounter, s_ZGIV_DLTA_EBV_BB .
Select * From /BIC/AEPSD_O0140
    Into TABLE i_AEPSD_O0140.
IF SY-Subrc = 0.
    LOOP AT i_AEPSD_O0140.
      MOVE-CORRESPONDING i_AEPSD_O0140 TO s_ZGIV_DLTA_EBV_BB.
      MOVE SY-DATUM to s_ZGIV_DLTA_EBV_BB-create_dt.
      INSERT ZGIV_DLTA_EBV_BB FROM s_ZGIV_DLTA_EBV_BB.
      IF SY-Subrc = 0.
        ICounter = ICounter + 1.
      ELSE.
        UPDATE ZGIV_DLTA_EBV_BB FROM s_ZGIV_DLTA_EBV_BB.
        IF SY-Subrc = 0.
          UCounter = UCounter + 1.
        ELSE.
          Message E067 with SY-DATUM ' ' SY-UZEIT ' '.
        ENDIF.
      ENDIF.
    ENDLOOP.
ENDIF.
ENDFORM.                    "100_EXTRACT_EBV_BB_DELTA_RECS
FORM 100_EXTRACT_EM2_BK_DELTA_RECS
FORM 100_EXTRACT_EM2_BK_DELTA_RECS.
Refresh:   i_AEPSD_O0240,
           i_GIV_DLTA_EM2_BK.
Clear:      UCounter, ICounter, s_ZGIV_DLTA_EM2_BK .
Select * From /BIC/AEPSD_O0240
    Into TABLE i_AEPSD_O0240.
IF SY-Subrc = 0.
    LOOP AT i_AEPSD_O0240.
      MOVE-CORRESPONDING i_AEPSD_O0240 TO s_ZGIV_DLTA_EM2_BK.
      MOVE SY-DATUM to s_ZGIV_DLTA_EM2_BK-create_dt.
        INSERT ZGIV_DLTA_EM2_BK FROM s_ZGIV_DLTA_EM2_BK.
      IF SY-Subrc = 0.
        ICounter = ICounter + 1.
      ELSE.
        UPDATE ZGIV_DLTA_EM2_BK FROM s_ZGIV_DLTA_EM2_BK.
        IF SY-Subrc = 0.
          UCounter = UCounter + 1.
        ELSE.
          Message E067 with SY-DATUM ' ' SY-UZEIT ' '.
        ENDIF.
      ENDIF.
    ENDLOOP.
ENDIF.
ENDFORM.                    "100_EXTRACT_EM2_BK_DELTA_RECS
FORM 100_EXTRACT_EM2_BL_DELTA_RECS
FORM 100_EXTRACT_EM2_BL_DELTA_RECS.
Refresh:   i_AEPSD_O0340,
           i_GIV_DLTA_EM2_BL.
Clear:      UCounter, ICounter, s_ZGIV_DLTA_EM2_BL .
Select * From /BIC/AEPSD_O0340
    Into TABLE i_AEPSD_O0340.
IF SY-Subrc = 0.
    LOOP AT i_AEPSD_O0340.
      MOVE-CORRESPONDING i_AEPSD_O0340 TO s_ZGIV_DLTA_EM2_BL.
      MOVE SY-DATUM to s_ZGIV_DLTA_EM2_BL-create_dt.
        INSERT ZGIV_DLTA_EM2_BL FROM s_ZGIV_DLTA_EM2_BL.
      IF SY-Subrc = 0.
        ICounter = ICounter + 1.
      ELSE.
        UPDATE ZGIV_DLTA_EM2_BL FROM s_ZGIV_DLTA_EM2_BL.
        IF SY-Subrc = 0.
          UCounter = UCounter + 1.
        ELSE.
          Message E067 with SY-DATUM ' ' SY-UZEIT ' '.
        ENDIF.
      ENDIF.
    ENDLOOP.
ENDIF.
ENDFORM.                    "100_EXTRACT_EM2_BL_DELTA_RECS
END-OF-SELECTION
end-of-selection.
perform D1000_REPORT_DATA.
D1000_REPORT_DATA
form D1000_REPORT_DATA.
*Display the title of the program
write: /25 SY-TITLE.
skip.
Diaplay the details of the user and time
write: /1 'Executed by', 15 SY-UNAME, 30 'Date',
38 SY-DATUM, 53 'Time', 60 SY-UZEIT.
skip 2.
write: / 'Delta Records have been extracted ',
         /   'Updates : ', UCounter,
         /   'Inserts : ', ICounter.
skip.
skip 3.
write: /20 'End of the report'.
endform.                                           "D1000_REPORT_DATA
chgeck it out this also may hep you

Automatic payment printing error:Program RFFOUS_C: No records selected

Hi,
I need to excute printing after payment with f110 using program RFFOUS_C.
I have done the following configurations:
- Assigned SAPScript in 'payment methods in company code' in Tcode FBZP.
- Assigned printing program in 'payment method in country
- Created check lot. Check created successfully.
- Entered variant in printing program RFFOUS_C in automatic payment F110.
Automatic payment run successfully. But printing form donnot have data which are check information
This is job log in SM37:
=======================================================================
Job started
Step 001 started (program SAPFPAYM_SCHEDULE, variant &0000000001950, user ID xxx)
Step 002 started (program RFFOUS_C, variant &0000000000093, user ID xxx)
Check number status at beginning of processing: 1002
Program RFFOUS_C: No records selected
Job finished
=======================================================================
Please give me help.
Thanks & Best Regards,

Hi,
In F110 in the tab, Additional log, tick all that is there and mention your vendor no. range that you have specified in parameters tab and run Proposal again.
Then go to proposal log to see the exact error reason..It will help..
Regards,
SAPFICO

Payment F110 - No data records found for these selection criteria, FZ208

Hi all,
I have done all configuration for payment medium for a customer in Norway. We use Telapay and program RFFONO_T. We have not activated the new general ledger but we have ECC 6.0 so I do not see why it should not work.
The invoices got paid with payment order but when I should download the file in Environment > Payment medium > DME Administration I got the following error message:
"No data records found for these selection criteria
Message no. FZ208
Diagnosis
No data could be accessed for this selection.
Possible causes are:
No data exists for the activated selection.
You have no authorization to display or edit data from this selection.
Procedure
First check whether your selection criteria are correct. You may need to expand the criteria to include a larger search area to check whether data exists in the system.
Make sure you have the proper authorizations for displaying and editing data. Read the Release note for DME management for further information on the authorization objects.
Proceed"
I have tried with different variants but that doesn´t matter. When I look at the payment run log I can see following:
"Additional parameter specifications 1400 SAPO02 are missing
Message no. FR193
Diagnosis
Entry 1400 $V2& is missing from the additional company code parameter table.
System Response
Processing was terminated.
Procedure
Maintain the entry according to the instructions in the program documentation."
I suppose that´s why I can´t get a file. Do any one of you know why I can´t get the file created. Please help.
Best regards Lisa

Hi Lisa,
I have a similar problem with program RFFONO_T and Telepay format for a Norwegian customer. Payment medium is not created. In the payment run log is the following message: "Additional parameter specifications XXXX SAPO02 are missing
Message no. FR193.Entry XXXX $V2& is missing from the additional company code parameter table."
According the program documentation for RFFONO_T, a company number (11 digits) has to be maintained under company code global data, additional details. The legal org.number with 9 digits is already entered but I do not understand where to enter a 11 digits company number? A user number (10 digits) is also entered in trans OB94 but the problem remains.
Did you find a solution to your problem?
Regards,
Agneta

Program execution during RIMODAC2..will it always reach to cif user exit

Hello ,
We are implementing cif user exit for Purchase Order at R3 side to capture additional date field. So logic to capture additional date field is put in user exit CIFPUR01. We have RIMODAC2 background job for Purchase order running on daily basis.
if there is no change in standard Purchase Order objects. When RIMODAC2 is executed for purchase order Integration models ..will program execution still always reach to R3 user exit part of the program irrespective of if any change in standard purchase order object has happened or not.
Will appreciate your answer.
Thank you
Best Regards
Nilesh Patil

Nilesh,
I am no longer sure I understand the question.
RIMODAC2 activates the model. Once a model is activated, if someone changes certain specific fields in an R/3 object, then these changes are sent to SCM, either immediately or via change pointers. All this happens irrespective of IM userexits.
If this same field in this same object is changed in R/3, and a userexit also has been implemented, the userexit will execute according to its design, performing whatever task it has been programmed to do.
If you create and implement a userexit, it begins working at that moment in time that it is installed. Data that flowed across 'yesterday' to SCM is not affected. Data that flows across 'tomorrow' will be affected. Data in R/3 will usually only flow across to SCM if there is some kind of triggering event, usually a database 'change' transaction (e.g., ME22N for POs) The mere act of installing a userexit will not generally affect existing data on either side. The userexit only affects data that flows across the IM. Unchanged records in the R/3 database will generally not be sent to SCM by the IM, and will not be subject to userexit processing.
It is not generally the responsibility of a functional consultant to explain the workings of a userexit to a technical consultant. It is enough that the functional identifies the userexit, and specifies the business requirement in as much detail as possible. The developer is then responsible for carrying out the coding. Technicals are generally expected to be competent enough to determine from the userexit docs, and from the surrounding code, how a userexit works. They can also raise a message to SAP. In the end, it is all just ABAP, although userexit implementations can be quite challenging. SAP seldom provides enough details in their documentation. Once the Technical has finalized the code, Functional and Technical together then perform unit testing, before passing the mods to users for integration testing.
If your client's coders are unable to manage the task, perhaps they should engage your company to provide technical expertise, as well as functional expertise.
Best Regards,
DB49

Sample rate and data recording rate on NI Elvis

I am currently working on a project that requires me to record my data at 1ms intervals or less. Currently the lowest timing interval I can record is at 10ms. If I change my wait timer to anything below 10 the recorded data in excel will skip time. For example instead of it starting at 1 ms and counting 2,3,4,5,6...,etc. It is skipping from 2,5,12,19,....,etc. So my question is if it is a limitation that I have reached on the NI Elvis or if it is possibly a problem with how I've created my LabVIEW code. My program from an operational stand point is working great, but it is my data recording that is causing me to not be able to move to my testing phase. Any help on this matter would be greatly appreciated.
Other information that might be relevant:
Operating System: Windows 7
Processor: Intel(R) Xeon(R) CPU E31245 @ 3.00 GHz
Memory: 12GB
DirectX Version: 11
Attachments:
Count Digital(mod12).vi ‏76 KB

Hi crashdx,
So my immediate thought on this issue is that the code inside your primary while loop might be taking too long to process to achieve such a high sample rate. Especially when making calls into external applications (such as Excel) which can take a large amount of itme.
There is a very useful debugging tool called the Performance and Memory tool. If you aren't familiar with this tool, it will allow you to see how much memory the various chunks of your code are using and, more importantly here, how much time each subVI is taking to execute. Does the code inside your while loop take longer than 1ms to run? If so, then you will definitely see unwanted logging behavior and will need to change your approach. Would it be possible to collect more than a single sample at a time and perform calculations on a large number of samples at once before writing them to Excel in bigger chunks?
I've included a link to the LabVIEW helpful detailing the Profile Performance and Memory tool.
http://zone.ni.com/reference/en-XX/help/371361H-01/lvdialog/profile/
I would first try and figure out how long it's taking your loop code to execute and go from there.
I hope this helps!
Andy C.
Applications Engineer
National Instruments

Need suggestion to get data from change log table of ODS.

Hello,
There is a case where i am loading opportunity header data from header ODS and opportunity item data from item ODS in the opportunity cube.
Status (1= OPEN, 2= WON ETC) of the opportunity are available only in header ODS and not in item ODS.
While loading data from header ODS to cube, I am loading it directly but while loading data from item ODS to cube i am using active data table of header ODS as a lookup in the update rule from item ODS to cube. I am selecting status from the active data table of header ODS while loading data from item ODS to cube.
Since active data table will have only after image records, there is some data mismatch in the report as i am selecting data from active data table of header ODS while loading data from item ODS to cube.
I need to select data from Change log in order to get before image also instead of active data table in order to overcome this issue. Is there any way by which i can do selection from Change log instead of active data table as change logs are generated at run time.
Please let me know if you have any suggestions.
Regards,
Sanjay Chaurasia.

Hi,
You can use the changelog table of the DSO.
Right click manage the Header DSO, go to the contents tab and click Change Log table. There you can see the technical name of the Change Log table.
In the update rule Routine, give the tech name of Change log table instead of Active table name.
Hope it helps.
Krishna

Program execution date record or log

Similar Messages

Maybe you are looking for