Program ID in RFC destination of type T
can one please explain what exactly is program id in rfc destination of type T
Hi,
from
http://help.sap.com/saphelp_nw2004s/helpdata/en/22/042652488911d189490000e829fbbd/content.htm
"Type T destinations are connections to external programs that use the RFC library to receive RFCs."
so program id is the name of such a program
Regards,
michal
Similar Messages
-
Whats the difference between RFC destination of type "HTTP" and "TCP/IP"
Hi Folks,
I want to know the difference between RFC destination of type "H" and "T".
In what instances/tasks we would use them?
Looking forward for your valuable answers...
Cheers,
Ram.Type of RFC connection.
By entering the type of RFC connection, you specify the communication method (TCP or SNA) and the logon type in the target sys
Type T (TCP/IP) destinations are connections to external programs that use the RFC API to receive 'Remote Function Calls'. You must specify the host name and the pathname of the program to be started. The communication method depends on how you select the program location.
Type H is the HTTP connection to R/3 system
Type G is the HTTP Connection to external server -
Program ID in RFC connection of Type TCP/IP:
Hi ,
Please let me know need to put Program ID in RFC connection of Type TCP/IP.
Is it necesary to register in java environment?
Regards,
Praveen KHi ,
We have a scenario where 3rd Party system need to connect SAP PI Over TCP/IP and Vice Versa.
For this where we need to register the Program ID in SAP PI, but when the 3rd Party Application tries to Ping the PI system OR ViceVersa ,PROGRAM ID is Getting DE-Registered from the SAP PI.
regards,
Praveen K
Edited by: praveen kalwa on Jun 28, 2010 5:42 PM
Edited by: praveen kalwa on Jun 29, 2010 11:34 AM -
Why RFC destination of type H in ABAP proxy
Hi All,
We specify the XI integration server url in the Sxmb_adm transaction of the application SAP system..
Why do we still require a RFC destination of type H pointing from application sys to XI...
What is the exact function of that RFC of type Hin SXMB_ADM, as far as I know we can give in two ways,
one is explicit URL, i.e., http://HOST:PORT/sap/xi/engine?type=entry
second option is, dest://RFCDestinationTypeH
RFCDestinationTypeH actually uses the above http entry. -
Program ID in RFC destination-XI
Hi
can any one tell me
for RFC sender channel purpose i'm creating RFC destination in SM59. through sap help and some other weblogs i'm trying create Program iD,but i'm getting some doubts on this:
1. How do i know corrosponding programID for this register server program?
2.How do i know sender system is Unicode system is or not?
Auctully my scenrio is RC--->JDBC, thats the reason i'm trying to create RFC destination in r/3 side..
regards
rambarkiHi Rambarki,
Is your scenario sysnchronous or asynchronous ?
if your scenario is asynchronous then from ABAP program you can call your RFC using the following syntax...
CALL FUNCTION 'RFCNAME'
DESTINATION 'RFCDESTNAME'
EXPORTING ...
IN BACKGROUND TASK .
for synchronous scenarios use this
CALL FUNCTION 'RFCNAME'
DESTINATION 'RFCDESTNAME'
EXPORTING ...
IMPORTING ...
You also try using SE37..
In SE37 enter name of your RFC and press on execute..
then enter your RFC destination name , input parameters..and execute.
Is test connection working fine in SM59 ?
Take look at this thread aswell
Re: How to test the RFC to Flat File scenario
Regards
Anand -
Call several .exe program via one RFC destination
Hi,
We use a RFC destination (one for each connected user) to communicate between SAP R/3 (4.6c) and an AS400 application via RFC server in .NET.
We need to call some .NET functions (for transactionnal purpose) and we wish not to mix functions refering to AS400 and .NET.
Is it possible to use one RFC destination to call functions in at least 2 .NET program ?
If not, is there other ways to make those communications work ?Hi
It is not possible. I don't think of any other way to resolve this.
Thanks & Regards,
Govind. -
RFC Destination of TCP/IP type :: Using Explicit Host Option
Hi
We need to call the executable file in an External non-sap system.
We created the RFC detination for this & follow below steps -->
*) Create RFC Destination of type TCP/IP
*) Select option " <i>Start Explicit Host</i> "
*) In Program parameter provide the path & name of the executable file e.g c:\windows\notepad.exe
*) In Target Host providing the name of non-sap system.
But while using Test Connection we are getting following error -->
<b>ERROR timeout during allocate
LOCATION SAP-Gateway on host clxstst02 / sapgw00
DETAIL no connect of TP net from host CLWBRIDGE after 22 sec
COMPONENT SAP-Gateway
COUNTER 34
MODULE gwr3cpic.c
LINE 1785
RETURN CODE 242
SUBRC 0
RELEASE 640
TIME Thu Dec 14 15:28:33 2006
VERSION 2</b>
Pls. suggest what needs to be done.
Regards
- Lalit -Hello Lalit,
Even though DNS is used you may have to have entires in host file.
Suppose the SAP server is A and the PC is B.
The the hostname/IP address for B should be maintained in A and vice versa should also happen.
Also check if you are able to ping the PC from the SAP servers and vice versa.
Regards.
Ruchit. -
Hi
I have created an RFC Destination of type 3 from XI pointing to SRM. Now I have to create another RFC Destination of type H pointing to the same SRM for using SRM as receiver proxy. Can I use same name for both RFC Destinations?
Will it create any error?
Radhika>Can I use same name for both RFC Destinations?
Not possible with same name.
>I thought the format is System ID CLNT plus number.
You can go with any naming convention.
>Just a quick confirmation, do I have to create any RFC Destinations in SRM system pointing to XI? There is already an RFC Destination of type 3 created, connecting with XI
If its already there then why do you need to create. Use the same destination. -
Create a RFC connection of type ABAP pointing to nowhere?
Hi guys
I would like to create a RFC destination of type ABAP pointing to nowhere. IDocs sent to a transactional RFC port using this RFC destination shall be listed as processed successful but they shall disappear and not be transported to the target system.
Does anybody have an idea?
Thanks and regards
MarkusThink this won't work because tRFC will wait for a commit from the receiving system. You won't get it and the messages will stuck in SM58...
Regards,
Kai -
Delete RFC-Destination 'None' - Urgent
hi all,
I have a problem with the RFC-Destinations. In the Transaction SOLUTION_MANAGER i got the message "RFC-Destination NONE does not exist".
But I have created the Destination.
Then I found the SAP Note 61888.
description:
If the destinations NONE, BACK or SAPGUI are inadvertently deleted, they must be recreated:
NONE : Type I, no further entries
But I cant recreate this Destination, I got the Message: "Not possible. Internal Connections will be generated".
Can please someone help me. It worked 8 weeks and now I got this failure.
Thx
LMhave a look at this sap note: 181591
"Each time an application server of an R/3 System is restarted, the RFC destinations of type I (internal connection) in this R/3 System are maintained again. The following rules apply:
1. There are always the destinations NONE and BACK which point to the respective application servers themselves."
maybe the restart will take care of it?
read the SAP note please
Regards,
michal -
Help with RFC sender, Program And RFC Destination
Hi!!
my scenary is asynchronous
RFC Sender -> SAP-XI -> Oracle reciever
I have a problem with abap, especially rfc, program and rfc destination. The connection with SAP-XI exist and SAP-XI receive the message but the message is empty.
1. In my program on the line
CALL FUNCTION 'ZBAPI_SD_PED_ORD_SERVIC' DESTINATION 'ZXI_ENVIAR_PED_ORD_SERVIC'
catch an error system_failure = 2 and it dont execute the rfc ZBAPI_SD_PED_ORD_SERVIC
2. I rewrite my program, that line to
CALL FUNCTION 'ZBAPI_SD_PED_ORD_SERVIC' STARTING NEW TASK 'NEW' DESTINATION 'ZXI_ENVIAR_PED_ORD_SERVIC'
catch an error communication_failure = 1 but the rfc ZBAPI_SD_PED_ORD_SERVIC is executed but no send to SAP-XI
3. I rewrite my program, that line to
CALL FUNCTION 'ZBAPI_SD_PED_ORD_SERVIC' IN BACKGROUND TASK DESTINATION 'ZXI_ENVIAR_PED_ORD_SERVIC'
No error but it dont execute the rfc ZBAPI_SD_PED_ORD_SERVIC and the message in SAP-XI is empty, display the tables but not the row. i check the table PED_ORDEN and RETURN but the controls fields dont are afected.
What is my Error?
Where am i making a mistake?
RFC
FUNCTION zbapi_sd_ped_ord_servic.
*"Interfase local
*" TABLES
*" PED_ORDEN STRUCTURE ZSD_RFC_T04
*" RETURN STRUCTURE ZSD_RFC_R06
TABLES: zsd_ped_orden, zsd_rfc_r01.
DATA: tb_ped_orden LIKE zsd_ped_orden OCCURS 0 WITH HEADER LINE,
tb_rfc_orden_error LIKE zsd_rfc_r01 OCCURS 0 WITH HEADER LINE.
*Get Pedido by Ordenes
SELECT * INTO CORRESPONDING FIELDS OF TABLE tb_ped_orden
FROM zsd_ped_orden
WHERE estatus EQ space.
LOOP AT tb_ped_orden.
MOVE-CORRESPONDING tb_ped_orden TO ped_orden.
APPEND ped_orden.
tb_ped_orden-estatus = 'X'.
tb_ped_orden-fecha_actualiz = sy-datum.
tb_ped_orden-hora_actualiz = sy-uzeit.
MODIFY tb_ped_orden.
ENDLOOP.
MODIFY zsd_ped_orden FROM TABLE tb_ped_orden.
COMMIT WORK.
*Errors in Ordenes
SELECT * INTO CORRESPONDING FIELDS OF TABLE tb_rfc_orden_error
FROM zsd_rfc_r01
WHERE estatus EQ space.
LOOP AT tb_rfc_orden_error.
MOVE-CORRESPONDING tb_rfc_orden_error TO return.
APPEND return.
tb_rfc_orden_error-estatus = 'X'.
tb_rfc_orden_error-fecha_actualiz = sy-datum.
tb_rfc_orden_error-hora_actualiz = sy-uzeit.
MODIFY tb_rfc_orden_error.
ENDLOOP.
MODIFY zsd_rfc_r01 FROM TABLE tb_rfc_orden_error.
COMMIT WORK.
ENDFUNCTION.
PROGRAM
REPORT ZBAPI_SD_PED_ORD_SERVIC.
DATA: ped_orden LIKE ZSD_RFC_T04 OCCURS 0 WITH HEADER LINE,
return LIKE ZSD_RFC_R06 OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'ZBAPI_SD_PED_ORD_SERVIC' DESTINATION 'ZXI_ENVIAR_PED_ORD_SERVIC'
TABLES
ped_orden = ped_orden
return = return
EXCEPTIONS
communication_failure = 1
system_failure = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE 'error' type 'I'.
ENDIF.
COMMIT WORK.
RFC DESTINATION
RFC Destination: ZXI_ENVIAR_PED_ORD_SERVIC
Connection TYpe: TCP/IP Connection
Register Server Program: ZBAPI_SD_PED_ORD_SERVIC
Gateway host: host00
Gateway service: sapgw00hi
For rfc sender adapter we hv to do some settings .Please chk whether this settings are well configured or not.
a) RFC destination
b) RFC channel in the XI directory
This weblog is a response to a few question about the basic configuration of the RFC sender adapter
that were posted on the XI forum (and also on my e-mail)
So here we go, basically we have to configure 2 things:
a) RFC destination
b) RFC channel in the XI directory
RFC destination:
1. To create the RFC go to TCODE: SM59
2. Create new destination of type T (TCP/IP)
3. Make sure you select Registered Server Program option before writing your program ID
4. Write you program ID (remember it's case-sensitive)
5. In the gateway host and gateway service write the values of your "Application system" - business system (not the XI server)
7. No configuration in the J2EE administrator nessecary
Now we can proceed to RFC channel configuration:
1. Enter your Application Server
2. Your Application Server Service
3. Enter your Program ID from the RFC destination
And we're done:)
Now you can test the RFC destination in SM59 to see if it works.
Please chk this following link.
1. RFC Processing with the RFC Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/25/76cd3bae738826e10000000a11402f/content.htm
2. Configuring the Sender RFC Adapter -
http://help.sap.com/saphelp_nw04/helpdata/en/67/6d0540ba5ee569e10000000a155106/content.htm
3. /people/swaroopa.vishwanath/blog/2006/12/28/send-rfc-to-sap-xi-150-asynchronous
regards
Manas -
Is RFC destination is required for accessing BAPI from java/VB program.
I am not able to understant that all BAPI are Remote enabled ,but no where I observed that RFC destination is required.
Can any body tell me exact flow and things step by step.
Any example/full source code so that I can call from java program.
I have tried some java code posted here but not able to understand ..
please provide me setttings also in SAP and java systemHi Nagaraju,
Thank you very much. your post resolve one of my basic need .really appreciate your post.
I was not able to execute bapi BAPI_MATERIAL_GETLIST but I executed BAPI_PO_GETDETAIL succesfully.
Still I have 2 doubt.
[1]. I called BAPI function module(BAPI_PO_GETDETAIL) from simple java program,But I need to call API method ( GETDETAIL) created for this BAPI not direct BAPI function module.
[2] this is something apart from original topic.
I have tested your java code in java as well as similar in ECC 6.0
But I am not getting any output in JAVA program.
I am getting output in ECC6.0 only when I will take internal table lt_mara[] with header line.
if I will take separate workarea output is not coming. I think this is the problem in JAVA also.
Please see the code and tell me where I am wrong.
REPORT ZTEST1.
types: begin of ty_mara .
include STRUCTURE BAPIMATRAM.
TYPES: END OF ty_mara.
types: begin of ty_list .
include STRUCTURE BAPIMATLST.
TYPES: END OF ty_list.
data: lt_mara type STANDARD TABLE OF ty_mara with HEADER LINE.
data: lt_list type STANDARD TABLE OF ty_list,
ls_list like LINE OF lt_list.
START-of-SELECTION.
lt_mara-SIGN = 'I'.
lt_mara-option = 'EQ'.
lt_mara-matnr_low = '000000000000000088'. "'P1001087'.
lt_mara-matnr_high = ''.
APPEND lt_mara.
lt_mara-SIGN = 'I'.
lt_mara-option = 'EQ'.
lt_mara-matnr_low = '000000000000000089'. "'P1001087'.
lt_mara-matnr_high = ''.
APPEND lt_mara.
CALL FUNCTION 'BAPI_MATERIAL_GETLIST'
TABLES
MATNRSELECTION = lt_mara
MATNRLIST = lt_list[] .
WRITE / 'output: '.
LOOP AT lt_list into ls_list .
write: ls_list .
ENDLOOP.
REPORT ZTEST2.
types: begin of ty_mara .
include STRUCTURE BAPIMATRAM.
TYPES: END OF ty_mara.
types: begin of ty_list .
include STRUCTURE BAPIMATLST.
TYPES: END OF ty_list.
data: lt_mara type STANDARD TABLE OF ty_mara, ">> Without header line
ls_mara like line of lt_mara.
data: lt_list type STANDARD TABLE OF ty_list,
ls_list like LINE OF lt_list.
START-of-SELECTION.
ls_mara-SIGN = 'I'.
ls_mara-option = 'EQ'.
ls_mara-matnr_low = '000000000000000088'. "'P1001087'.
ls_mara-matnr_high = ''.
APPEND ls_list to lt_mara.
ls_mara-SIGN = 'I'.
ls_mara-option = 'EQ'.
ls_mara-matnr_low = '000000000000000089'. "'P1001087'.
ls_mara-matnr_high = ''.
APPEND ls_list to lt_mara.
CALL FUNCTION 'BAPI_MATERIAL_GETLIST'
TABLES
MATNRSELECTION = lt_mara
MATNRLIST = lt_list[] .
WRITE / 'output: '.
LOOP AT lt_list into ls_list .
write: ls_list .
ENDLOOP. -
RFC Destination type RFC Receiver Adapter?
Hi,
What is the RFC destination type for Sender RFC Adapter?
and what is the need a Program ID for sender Adpter.
What is the RFC destination type for Receiver RFC Adapter?
Regards
GopiWhen we use the RFC Adapter?
SAP systems up to and including SAP Release 4.6 are not able to exchange data by using XML messages and http. The only way you can connect such systems to the Integration Server directly is by using the RFC adapter (or the IDoc adapter).
You require the sender adapter if you want to use the Integration Engine to process RFCs. The RFC adapter converts the incoming RFC data to XML message format (RFC XML) so that it can be processed by the Integration Engine.
You require the receiver adapter if the determined receiver system expects the data from the Integration Engine to arrive in RFC format. In this case, the Integration Engine must transfer the received XML message (RFC XML) to the RFC adapter. The RFC adapter converts the RFC XML message to a valid RFC call and executes the call.
The following three scenarios are possible when using the RFC adapter and the Integration Engine:
1) SAP R/3 to SAP NetWeaver Application Server
2) SAP NetWeaver Application Server to SAP R/3
3) SAP R/3 to SAP R/3
When we use ABAP Proxy ?
SAP systems based on Web AS 6.40 and higher are able to exchange data by using messages and HTTP. These systems can use ABAP proxies to connect to the Integration Server.
To connect the platform-independent message interfaces, which are stored in the Integration Repository, to the Integration Server, use the ABAP proxy interface.
Please Reward the points if it's helpful...
Regards,
Ramana. -
When do we use RFC destination Type T versus Type 3?
While creating RFC destination Type T, the program ID, blogs says we should use "Registered server program" and can give any free text. I tried that but says there is no registered server program called XXX on system. So, i'm really confused here.
my understanding is for IDOCs you need Type 3, and for RFC you need Type T. Is that true or we can use any type with these?
Thanks,
AnikaHi Anika,
i think this links could be useful:
http://help.sap.com/saphelp_47x200/helpdata/en/22/04262b488911d189490000e829fbbd/frameset.htm
Differences in the RFC destination types
You're right, for Idoc you have to use type 3 and for RFC you have to select a type T destination entering a program ID.
Let's make an example.
Suppose you have defined an RFC destination RFC_X with program id PID_X on ECC.
On XI you have created an RFC sender adapter and you have specified ECC as the sender and PID_X as the program ID.
When from ECC an RFC is called using destination RFC_X then the sapgateway looks for a receiver registered with the program id PID_X, it finds your RFC adapter and sends the call to XI.
Hope it helps.
Kind Regards,
Sergio -
RFC destination for synchronous communication (message type SYNCH)
Hi experts,
I am trying to configuare ALE settings.waht i did is
My sending & receiving systems are one server with different clients.By using SALE transaction
1.crated logical systems.(LS_800 &LR_810)
2.Assigned those to clients.
3.Created RFC destination
4. Created modelview assign sending & receiving
systems and message type.saved it.
4.generated Partner profile.Here i am getting below problem
Target system LR_810
RFC destination for synchronous communication (message
type SYNCH)
Partner profile LR_810 SYNCH does not exist
Generate partner profile or
specify outbound partner profiles for message type
SYNCH
Target system LS_800
RFC destination for synchronous communication (message
type SYNCH)
Partner profile LS_810 SYNCH does not exist
Generate partner profile or
specify outbound partner profiles for message type
SYNCH
Regards;
Upender.Hi Shital;
Thanks for your replay;
Still am getting the Same Error;
Thanks;
Upender.
Maybe you are looking for
-
Satellite P50T-A-115 after Win8.1 upgrade does not play sound over HDMI
I have a newly acquired Satellite P50T-A-115, upgraded to win 8.1, all drivers and upodates suggested are installed. I get no sound on my home movie system, playing from my laptop, while the video is good. The sound comes from the laptop internal spe
-
Can I upgrade the solid-state drive in a MacBook Pro with retina display after purchase?
There used to be an option to upgrade the solid-state drive when configuring a MacBook Pro on the Apple Store online, but it is now gone. This makes me wonder if Apple's SSDs are built into the computer like the RAM is. So, is it possible to upgrad
-
How to make a Pages doc a graphic?
I work in a mixed office, mainly Windows. Since I use a Mac I was asked to design a simple graphic (using no more than standard Pages elements) to be used as a letterhead in Word documents. Is there a way to save a Pages document (about 1" x 5.5") as
-
Firefox crashes sometimes when I login to my email?
I recently upgraded to CA internet security suite 2010 and sometimes when I log in to my roadrunner email the tabs will flash between log-in and message list and then Firefox will crash. When I hit the Firefox icon on my desktop the log in page will
-
BatchNotificationHandler for onBatchProcessComplete operation
Hi All, I am using SOA 10.1.3.3 version. I am using File Adapter debatching concept. For that I have used batchNotificationHandler by using the property <property name="batchNotificationHandler"> in bpel.xml . But I am getting the notification for on