RFC Destination of TCP/IP type :: Using Explicit Host Option

Hi
We need to call the executable file in an External non-sap system.
We created the RFC detination for this & follow below steps -->
*) Create RFC Destination of type TCP/IP
*) Select option " <i>Start Explicit Host</i> "
*) In Program parameter provide the path & name of the executable file e.g c:\windows\notepad.exe
*) In Target Host providing the name of non-sap system.
But while using Test Connection we are getting following error -->
<b>ERROR timeout during allocate
LOCATION SAP-Gateway on host clxstst02 / sapgw00
DETAIL no connect of TP net from host CLWBRIDGE after 22 sec
COMPONENT SAP-Gateway
COUNTER 34
MODULE gwr3cpic.c
LINE 1785
RETURN CODE 242
SUBRC 0
RELEASE 640
TIME Thu Dec 14 15:28:33 2006
VERSION 2</b>
Pls. suggest what needs to be done.
Regards
- Lalit -

Hello Lalit,
Even though DNS is used you may have to have entires in host file.
Suppose the SAP server is A and the PC is B.
The the hostname/IP address for B should be maintained in A and vice versa should also happen.
Also check if you are able to ping the PC from the SAP servers and vice versa.
Regards.
Ruchit.

Similar Messages

RFC Destination from CE is unwantedly using SSO

Hi,
Our developers are testing some services from Service Browser in CE 7.11 system. They are using the RFC Destination SAP_ECC which we have created from NWA --> Configuration Management --> Security --> Destinations.
In this RFC, we have given the details of the backend ECC system and also selected the user type as "Technical User" and provided a user/password. Pinging the destination from here works just fine.
But, when one of our services from Service Browser calls this destination SAP_ECC to access the backend system, then the call is not connecting to the backend using the technical user supplied in the destination, but is trying to use SSO. Thus the user being passed is not the technical user but the user of the developer who is calling the service. The error message says:
This system rejects all logons using SSO tickets
We do not have any intention of using SSO here.
Can someone suggest how to figure out why SSO is coming into picture and what can we do to elimincate this issue?
Thanks,
Shitij

set the sso parameters in the backend.

Creating app scoped external content type using Provider Hosted App in sharepoint 2013 using visual studio 2012

Hi,
I am creating provider hosted app in visual studio 2012 using app scoped external content type having OData with Northwind url
App manifest start page url :
ODataNewAppWeb/Pages/Default.aspx
In XML it is:
<StartPage>~remoteAppUrl/Pages/Default.aspx</StartPage>
When i am deploying app pressing F5 the app gets deployed successfully....
Now i am changing my start page url in Appmanifest like this:
ODataNewApp/Lists/Employees
In XML it looks like:
StartPage>~appWebUrl/Lists/Employees</StartPage>
When i am deploying app pressing F5 the app..
Getting register SOD error.....
I have followed all the steps like:
1)Creating app domain
2)Starting all the required services
3)Creating root site collection
But still no success.. Please help me on this.... I am struggling with this from two weeks...

Have you set up a wildcard DNS entry for the spapps.com domain?
Also if you're trying to connect from the server you might be hitting loop back check issues.

RFC - XI - WEBSERVICES scenario - Where to create RFC Destination

Hi Experts
For my RFC - XI - WEBSERVICES scenario, I have to create one TCP/IP RFC destination on R/3 system with the following details
RFC Destination Name    : XXXX
Connection Type            : T (TCP/IP)
Activation Type              : u201CRegistered Server Programu201D
Program ID                      : YYYY
Gateway Host                : R/3 Details ..??
Gateway Service           : R/3 Details ..??
My Function Module (Remote-Enabled) - u201CZZZZu201D is defined in R/3 System.
This Function Module should be communicated with the target system i.e. NW XI system
As per the Note from SAP Help: To be able to communicate using RFC, you need to define the target systems as RFC destinations in the sending system(R/3)
Target system u2013 XI Server
Sending system u2013 R/3 System
Are my details provided are good enough as per my explanation? Please guide me in this regard.
QUESTION : Where exactly do I need to create the RFC Destination(SM59)? on R/3 side or on XI side?

Refer the following link-
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3414700)ID1636235450DB01012070359836134304End?blog=/pub/wlg/1438
what are the inputs should be given to Gateway Host and Gateway Service while creating RFC Destination??
Open transaction SMGW on the R/3 system and choose
Goto -> Parameters -> Display. Beneath Attributes there will be the
entries 'gateway hostname' and 'gateway service'.#

RFC Destination None Error for MIGO

Hi,
I am getting RFC Destinatnation NONE error while posting Goods Receipt. GTS service for SD and MM is not active. Error showing for FM GRC01_COST_OBJECT_COST.
Can any one help in this regard.
Thanks in advance.
SP Raj

Hi,
Pl find the details below of the error.
Short text
    RFC destination "NONE" does not exist.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLCK36" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    The 'destination' "NONE" for a Remote Function Call
    is unknown.
    You can display the RFC destinations available in the system using
    the transaction SM59.
Trigger Location of Runtime Error
    Program                                 SAPLCK36
    Include                                 ISAUTO_CK_SAPLCK36============E
    Row                                     812
    Module type                             (FORM)
    Module Name                             PRICE_STRATEGY_NEW
806 ************************************************************************
807 *     DOERNER, GRC, 10/11/1999: Add one new strategy:
808 * 3b. Create costestimate during goods receipt
809 ************************************************************************
810     when 4.
811       if k_debug_loc is initial.
>>>>>         call function 'GRC01_COST_OBJECT_COST' destination 'NONE'
813                 exporting
814                      im_vbeln     = f_mtcom-vbeln
815                      im_posnr     = f_mtcom-posnr

RFC destination for VMC (Virtual Machine Container)

Hi ,
Just loaded the CRM 70 system (customers, materials, contacts, ... ) and the KB from the back-office (ECC 6.0).
Calling the IPC via transaction COMMPR01 for a configurable material we have the following call in error :
FUNCTION ipc_get_knowledgebase.
CALL FUNCTION 'CFG_API_GET_KNOWLEDGEBASE' DESTINATION gv_vmc_dest
The RFC destination 'gv_vmc_dest' is empty . How to setup the RFC destination for VMC and the configuration so SAP know the RFC destination is the one to use for the VMC.
Thank you

Klaus ,
Thank you , yes VMC is on the same CRM7.0 server , I do get the following short-dump .
Short text
    "Found no handler for remote function module CFG_API_GET_KNOWLEDGEBASE"
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLIPC_API_CFG_COMMAND" had to be terminated because
     it has
    come across a statement that unfortunately cannot be executed.
    The error occurred during an RFC call to another system.
    In the target system, a short dump has been written as well.
    More detailed information on the error cause can be found there.
Error analysis
    An error occurred when executing a REMOTE FUNCTION CALL.
    It was logged under the name "RFC_EXTERNAL_ABORT"
    on the called page.
Trigger Location of Runtime Error
    Program                                 SAPLIPC_API_CFG_COMMAND
    Include                                 LIPC_API_CFG_COMMANDU07
    Row                                     19
    Module type                             (FUNCTION)
    Module Name                             IPC_GET_KNOWLEDGEBASE

How to delete RFC destination during runtime

Hi Experts,
I need to delete the RFC destination (created via SM59) during runtime. Which API can I use to do so?
Thanks & Best Regards, Johnney.

Do delete different type of RFC destination at runtime , you can use these FM on the basis of its type:
1. To Read Type of RFC Destination use
                RFC_READ_DESTINATION_TYPE
2. To Delete RFC Destination
               RFC_MODIFY_ARFC_PARAMETERS
               RFC_MODIFY_HTTP_DEST_TO_EXT
               RFC_MODIFY_HTTP_DEST_TO_R3
               RFC_MODIFY_L_DESTINATION                - Read Documentation
               RFC_MODIFY_R3_DESTINATION             - Read Documentation
               RFC_MODIFY_TCPIP_DESTINATION        - Read Documentation
Regds.
Suman

Monitor RFC Destinations

Hi guys,
Couldn't find a way simply monitor RFC destinations with CCMS monitor. Specifically, I've RFC destination type T (http)
can't find a way to monitor it.
Please advice,
Dimitry

Hi
        Availability can be implemented using the RFC availability check for specific RFC destinations.
        Monitoring of specific and critical RFC destinations can be done by using the standard CCMS MTE
        class CCMS_RFCDest_Availability_Col
        Using the methods described above, alerts can be generated in the CCMS monitoring transactions
As specified above note 1069130 will help you in achieving it.
Thanks
Amit

Unable to change RFC destination in IT Performance reporting wizard

Hi Experts,
I am setting up IT Performance Reporting in my Solman EHP1 system. In the first page of the PErformance reporting wizard, it asked me for RFC destination from BI to Solman(1st field) and Solman to BI (2nd field). I initially entered an existing RFC destination that we are already using in a separate application that has a user with very-limited authorization. Now, I am trying to change the RFC destination by running the same "Configure IT Performance Reporting" wizard but both fields are already GREYED out.
I tried deleting the RFC destination previously defined in an attempt to reenable the fields but only the 2nd field was enabled. When I try to continue the setup, it results into a Shortdump because it is still looking for the initially defined RFC dest which is defined in the 1st field that cannot be edited.
SAP has not yet provided us with a solution.Your help is greatly appreciated.
Thank you very much.

You canprovide the RFC destination in DOE administration portal. Goto Configurations link and search for "BACKEND DESTINATION" parameter in "BACKEND CONFIGURATION" link. Here you can provide RFC destination at SWCV level or at Data object level.
After deleting RFC destination in SM59, it will never take you to backend system.

Creation of RFC Destination problem

Hi Experts,
I need to establish an RFC communication between TREX7.0 server running on windows 2003 server and the SAPR/3 4.7 EE server running on windows2000.
server. Initially i used TREXAdminTool to create RFC Destination, i was unable to create successfully
Then i used SAPR/3 server from TCODE: SM59, here also am facing the same problem, what are the values i have to give for
1. RFC Destination, 2. Program id 3. Gateway Host and Gateway Service.
PLZ guide me step by step procedure with some example values to create RFC Destination to TREX Server successfully using TREXAdminTool or from SAPR/3 server---SM59
ADV Thanks
Regds
phanikumar

Hi,
Till now i didn't install explicitly any SAP Gateway on TREX server.
I installed TREX server along with SAP Netweaver WEB AS java.
Shall i need to install any SAP Gateway to configure RFC Destination?
If so can you give me the procedure how to install explicitly SAP gateway?
Regds
Phanikumar

RFC destination and webserver settings

Hi,
I need to configure the RFC destination and other technical settings and certainly need help from Basis people. However what inputs we have to give them enabling us to set right configuration. I find different proxy class, RFC destination etc have been set for different object types.
For ex, I want to configure cproject with MM,SD, CO etc
What information as a functional consultant we have to provide to Basis people.
I met with following error in accounting.please tell the path for required settings.
An error occurred when connecting to the accounting system EC6CLNT100
Message no. DPR_FIN_GECCO001
Diagnosis
A connection to the Accounting system could not be made. Possible causes are:
The system is not available
The RFC destination for the Accounting system is incorrectly defined in Customizing.
System Response
The system could not read data from the Accounting system. The system cannot distribute project data to the Accounting system.
Procedure
In transaction SM59 check the RFC destination defined for the Accounting system.
Check whether you defined the correct RFC destination for the object type. See Customizing for Collaboration Projects under --> --> .
Zinni
Edited by: Makwana Zinni on May 27, 2009 1:58 PM

Hi,
I am getting the same error. Could you please elaborate on how you fixed the error. I am not sure what/how to test in tcode SM59. I am following the cofig guide for cProjects but the cProjects screen is still giving me the error msg and I am not able to understand the solution.
Here is the ERROR MSG
An error occurred when connecting to the accounting system
Message no. DPR_FIN_GECCO001
Diagnosis
A connection to the Accounting system could not be made. Possible causes are:
The system is not available
The RFC destination for the Accounting system is incorrectly defined in Customizing.
System Response
The system could not read data from the Accounting system. The system cannot distribute project data to the Accounting system.
Procedure
In transaction SM59 check the RFC destination defined for the Accounting system.
Check whether you defined the correct RFC destination for the object type. See Customizing for Collaboration Projects under --> --> .
ANYONE'S HELP WILL BE APPRECIATED!!

Transaction IDX1: Port SAPPRD, client , RFC destination contain errors

Hi all,
when I send an IDOC from Xi to R/3 I get the following message in XI monitoring:
Transaction IDX1: Port SAPPRD, client , RFC destination contain errors
ERROR= 2:IDOC_ADAPTER(151)
However everything is maintained correctly (i think) in IDX1. I can upload the IDOC metadata with IDX2 from the R/3 system.
I seems that Xi doesn't have the clientnumber available. (should be 600) but is not mentioned in the error.
Did I miss something?
Thanx Ron
Message was edited by: Ron van der Sterren

Hi Ron,
Settings in XI side.
1. Create the RFC Destination(SM59) with connection type 3, pass the target host pass is R/3 server name and logon tab enter the R/3 logon details.
Test the connection is success and check the Remote login button it's connecting the R/3 system or not.
2. Create the Port IDX1 and pass the client number is (R/3 client) and pass the RFC destination which you created above.
R/3 side
1. Create the RFC Destination(SM59) with connection type 3, pass the target host pass is XI server name and logon tab enter the XI logon details.
Test the connection is success and check the Remote login button it's connecting the XI system or not.
2. Create the TRFC port to transfer the IDOC'S and pass the RFC destination which you created above.
3. create the logical system in BD54 this name should be same as XI logical system name.
4. Create the partner profile (WE20) and partner type is 'LS' with inbound parameters and pas the appropriate values.
Let me know if you have any issues.
Regards,
venu.

Transaction IDX1: Port SAPQA1, client 500, RFC destination contain error

Hi experts
I am configuring XI for MM-SUS scenario, when I try to send Idocs from R/3 to XI I have this message:
Transaction IDX1: Port SAPQA1, client 500, RFC destination contain error
In XI transaction IDX1 I have maintened a port (MM_QA1) and RFC (MM_RFC) that points to R/3
In XI transaction IDX2 there is no entries
Some idea how to solve it?
Thanks
Nilson

Hi,
>>Could you clarify it for me, In XI side Transaction IDX1 I have a PORT and RFC destination to R/3?
Yes you are correct..
You should have done this..
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Define Gateway service
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
Thanks
SaNv...

RFC Destinations for different clients on same host

Hi
I have an SRM and SUS on the same server and the clients are different. I have a flow from SRM to SUS and also back from SUS from SRM.
Do I have to create seperate RFC Destinations for different clients?
What about the other details likePort, Partner Profile, Logical system etc, do we have to maintain all for both of them seperately ?
Regards
Ajith

Hi Ajith,
Do I have to create seperate RFC Destinations for different clients?
>>> A set of RFC Destination, Port & Parnter Profile is used to connect two systems between one client of source system to one client of Target system. Eg. from clinet 100 of XXX system to clinet 100 of YYY system. So, you need to take this into account and create seperate RFC destination for each different pair of connections.
What about the other details likePort, Partner Profile, Logical system etc, do we have to maintain all for both of them seperately ?
>>>In PI, you need to create BS for each different client of SRM & SUS system.
I hope this helps.
Regards, Gaurav.

Steps to create rfc destination

hi,
what are the steps to create rfc destination

Follow the following steps :
1. Create RFC destination for both the systems on CRM and R/3 in SM59.
2. Create the logical systems and assign clients to logical system in SALE transaction both on CRM and R/3.
3. Create a user in the R/3 table CRMCONSUM with the name CRM.
4. Maintain the Middlware Parameter tables on CRM : Table SMOFPARSFA:
Create an entry for following parameter entry:
Key - R3A_COMMON
Para name - CRM_DEFAULT_DESTINATION
Value - R/3 logical system
5. Maintain the parameter tables on R/3 system : CRMRFCPAR, CRMPAROLTP
CRMRFCPAR :
Create new entry with following data:
User - CRM
Object name - *
RFC Destination - RFC destination for CRM
Load types - All Load Types
In Queue flag - X
Send XML No XML
CRMPAROLTP :
Create the following parameter entry:
Para name - CRM_DEFAULT_DESTINATION
User - CRM
Value - Name of the CRM logical system
6. Create Sites and attach subscriptions in Admin Console : Tcode SMOEAC
Create a Site as CRM and another as R/3. Attach the required subscriptions to the R/3 site.
7. Register the queues in SMQR and SMQS transactions.
PS : For detailed steps refer the Middlware Base Customizings(CR500 and CR100)
Regards.

RFC Destination of TCP/IP type :: Using Explicit Host Option

Similar Messages

Maybe you are looking for