Program or function module to check the status of the DTP.
HI All,
We have scenario like we need to pop up a message for a DTP.The message should tell us the status of the DTP load like successfully loaded or not.
we have created a custom screen for hierarchy load and provided access to the customer.cutomer can able to load hierarchy on the own.once they click execute it will trigger a process chain.
process chian contains three variants startd ,inofpackge load and dtp.
we need to pop up a message once the load has been sucessfully completed or not in the custom screen which has been provided to the customer.
Please suggest.
Regards,
Sakthivel S
Hi,
Table RSBKDTPSTAT will provide status information either Dtp is active or INA.
we need to pop up a message once the load has been sucessfully completed or not in the custom screen which has been provided to the customer : for this need to create msg for that Dtp in PC .
Refer Below Doc provide steps:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10979a4a-d3da-2e10-3bab-8916d8245309?QuickLink=index&…
Thanks.
Similar Messages
-
How to change the status of the system programmatically with Function Module
I Was trying to change the status of the notification through STATUS_CHANGE_INTERN function module . But It is not changing the status of the notification.
Can any one help to understand what is going wrong ... or any other function module to change status of Customer complaint notification ..Hi KK,
Please can you take clues form the below discussion thread -
http://scn.sap.com/thread/775169
Thanks to all original contributors of this thread!!
NOTE: Please note that the main point explain here is that, if you are willing to change to a status Ex, NOPR, NOCO, etc then you will need to pass on the value 'I0070', 'I0072', etc. I will also go ahead and like to add one more point here to make the language check as well like "EN", 'DE', etc as these statuses are language dependent too.
Thanks,
Arijit -
I sent in my iPod nano to the replacement program about two weeks back. However, I checked the status of the repair and it still says it has not been received yet. However, my boyfriend sent in his the same time I did and his repair status says repair being diagnosed. I still have the "receipt" of the package when they first sent it to me. I sent it via FedEx. Is there any way to follow up on where the nano could be or maybe find out if I can still get a replacement even though my nano might be lost in transit?
I sent it via FedEx.
Call FedEx. They will be able to track their own packages. They will let you know if your iPod Nano was delivered and to who! -
Standard function module for checking the sales organization and plant
Hi all,
Does have standard function module for checking the relationship between sales organization and plant?
Thanks a lot!
Ninahi
good
check these BAPIS
BAPI_SALESGROUP_GET_DETAIL Sales Group: Display Name
BAPI_SALESOFFICE_GET_DETAIL Sales Office: Display Name
BAPI_SALESOFFICE_GRP_EXIST Sales Office / Sales Group: Existence Check
BAPI_SALESORG_EXIST Sales Organization: Existence Check
BAPI_SALESORG_GET_DETAIL Sales Organization: Display Data
BAPI_SALESORG_OFFICE_EXIST Sales Organization / Sales Office: Existence Check
PLANT=>
BAPI_PROMO_GETSITEPLANNING Detailed Data for the Plants Involved in a Promotion
thanks
mrutyun^ -
Is there a way to use business objects in the program or function module?
Hi Experts,
Is there a way to use business objects in the program or function module.
Thanks in Advance.
Naval bhattHi Naval,
Ofcourse you can use business objects in your programms/ methods.
You can use function modules or macros (available from include <cntn01>) for using business objects in your application.
refere following two links for startup information
http://www.sap-img.com/abap/reading-attribute-of-a-business-object-in-abap.htm
http://www.jt77.com/business-warehouse/work-flow-12619.html
Regards,
Abhijit -
Function module to check if a file is already open
Hi All,
Could any one of you tell me a function module which checks whether a given file on the application server is currently being open or not.
Regards
Amit MishraAmit,
Try GET DATASET.
Basic form
GET DATASET dsn.
Extras:
1. ... POSITION pos
2. ... ATTRIBUTES attr
In some cases, the syntax rules that apply to Unicode programs are different than those for non-Unicode programs. For details, see File Interface.
Effect
Used to get the properties of a file already open.
You can use this statement without additions to determine whether the file is open.
If the file is not open, an exception of the type CX_SY_FILE_OPEN_MODE is triggered.
Regards,
Rao A
Message was edited by: Rao Arimilli -
ABAP Program or Function Module to activate infospoke/openhub table
Hi,
Post migration to production, when i am trying to load the data in open hub table, its showing OH table is not active. i had tried to all aspect but i am unable to load the data.
is there any ABAP Program or Function Module to activate infospoke/openhub table
Thanks & Regards,
Pankaj BansalHello Pankaj,
Please check whether you have access to TCode SE14 . If Yes , You can use this TCode to activate the Tables.
There are lot of Posts talk about the procedure for activation through SE14. please refer the same
Thanks & regards,
Prasath -
Function module for Process order status
Hi techies,
I want to know the function module for process order status , idoc type is liopro01 and message type is liopro, my requirement is that based on the different status received in IDoc SAP should update the process order status, separate user status will be defined as "MO START" and "MO end" using status profile.also it has change the process order status to "TECO" also it should check the user status for "MO Abort".
Thanks in AdvanceHi ross,
Try this function module.
STATUS_CHECK_MULTI
May be helpful.
Lincon -
Functional module for PM order Status
Hi All,
Could any body suggest me the functional module to get PM order status as on particular date or can any body explain me how can I get the status on the particular date.
Thanks and regards,
Basavaraj.Check below links. There are lot available in this forum.
Purpose of STATUS_READ function module
FM to get Production Order user status (CO03) and system status
How to find work order system status & user status -
Function module to check source system
Hello
Can some one help me by providing the name of the function module to check the Source system connection?
I know that in the source system we can right click and check.
But i want to know the function module to check the status.
Thanks in advance
Kind regards
M.A
Edited by: M.A on Aug 19, 2008 12:42 PMHi shasank,
Thanks for the info.
I had given the tech name of the source system as an input to the function module.
But it raises an exception that destination does not exists.
But the source system connection is ok.
Regards
M.A -
Function module to check whether Goods Receipt of a Purchase Order is done.
Hi,
Is there any function module to check whether Goods Receipt of a Purchase Order is already done?
Taking into consideration reversals.
Thanks.Hi,
I think u can do this by using a simple select query.
u have to go in EKBE table.
put the PO no. in field EBELN + EBELP(line item) and get the material docuement no. in field BELNR + BUZEI(line item).
Thanks
Jitendra -
Program or Function module to delete data from Open Hub Destination Table
Hi All,
Can anybody suggest me a Program or Function module to delete data from Open Hub Destination Table.
Thanks & Regards,
Vinay KumarYou can simply goto t-code SE14 mention the open hub destination table and Delete data by clicking on "Activate and Adjust database" with radio button "Delete Data".
Regards,
Arminder -
Function module/Webservice for Sytem status overview widget
Hi,
We want to create a "System status overview" - widget, which can show very briefly an overview of which systems are up an which are down (+ some additional backgroundinfo).
(Instead of communicating system statusses via e-mail)
Therefore we are looking for a function module/webservice which provides status info of all systems linked to Solution Manager. Does anybody knows about a standard functionality which provides this information, or does an application lik that already exists?
Thanks in advance for your replies.
Cheers,
SanderHi Mohammed,
Thanks for the reply.
That 's exactly the information we need, but we want to be able to create a simple display to the end user:
- without logging into the system
- displaying only a red or a green light/system
- information about all systems in all solutions
to put into the portal or even better, to put into a widget (I was thinking about using Adobe Air for this one).
To do so, I think there will be the need of a simple web service which returns a list of all systems toghether with their availability status...?
KR,
Sander -
Accessing internal table of main program inside function module...
I have function module say ZFUNC and main program say ZMAIN and internal table defined as IT_TAB inside ZMAIN but not passed as parameter to Function module ZFUNC.
If I want to access the field value of IT_TAB of main program ZMAIN inside ZFUNC during debugging then, I simply put <b>(ZMAIN)IT_TAB-amount</b> in ABAP debugger and then change it when the debugger is inside ZFUNC.
How can I write code to change the value of internal table of main program in function module ZFUNC instead of doing in debugger ? I guess I have to use some field symbols, but not sure. Please suggest.
Regards,
Rajesh.Yes, you do need to use a field symbol. Say for example, you had a internal table called IMARC in your program and you want to access it later in a funciton module, you would do something like this.
data: xmarc type marc.
field-symbols: <imarc> type marc_upl_tt.
* Assign an internal table
field = '(ZPROGRAM_NAME)IMARC[]'.
assign (field) to <imarc>.
loop at <imarc> into xmarc.
write: / xmarc-matnr, xmarc-werks.
endloop.
Regards,
Rich Heilman -
What are the Includes in Function Module...? if the fuction group IS ZSJ_FC..?
How can I access SAP through Internet....?
Moderator Message: Interview-like question(s). Thread locked.
Edited by: Suhas Saha on Sep 30, 2011 11:14 AMHi
No! U can insert an own you Z-INCLUDE or somethingelse, try to regenerate the index of the program.
Max
Maybe you are looking for
-
Best method to archive projects?
I know this has been discussed before, but I am looking for some more info. Here is my archive workflow... Since I keep all of my media on an external drive, I do not copy media to project. When project is finished, I export a ProRes master. No probl
-
Cannot start Photoshop Elements 8 - scratch file error
Admittedly, I posted this in the wrong forum: http://forums.adobe.com/message/3020052#3020052. Also, I resolved my issue, but I'm posting this because it's apparent other are having the same issue and maybe this will help them. When attempting to la
-
TextArea in Applet to CSV file
Hi All, I was wondering if it is possible to save the content of a TextArea in a CSV file? If so please let me know the command that does this job! Thanks, ng.
-
In table T159L the entry 1111 is missing
HI All, When I tried to do Production Receipt with MB1C, I have got the below error. in table T159L the entry 1111 is missing. (1111 is my plant) Pls advice. Niranjan
-
Hi All I am doing assembly processing for project with varient configeration When I create and save sales order for a material taking quantity as 1 a project is being generated for SO with quantity 1 for a material when I put quantity more than one i