Programmatically change the "location" field in Reports/Subreports
Post Author: suneberg
CA Forum: .NET
I need to change about 800 reports with subreports.
The field location contains now: ServerName.DatabaseName.TableName (i.e. "Neptun.IManager.Customer")
It should be changed to TableName (i.e. "Customer")
How can I do this through the API?
Post Author: suneberg
CA Forum: .NET
Addition: this is in CR 8.0 or 8.5
Similar Messages
-
ABAP Dump while Changing the Layout fields in Report output - RCOPCA02
Hi,
I Copied the Standard Program RCOPCA02 to ZRCOPCA02. I added two new fields(AUART, AUGRU) in the report output. It is executing correctly with default layout, While Changing the layout for displaying new fields it is dumping.
I am not understanding, What should i do...
Here is the Code.
report ZRCOPCA02 no standard page heading message-id km
line-count (2) line-size 81.
type-pools: slis, ecarc.
DDIC-Tabellen *******************************************************
tables: glpca, "Einzelposten / Ist
glu1, "Übergabestruktur FI-SL-Anzeige
t000,
tka01,
sscrfields,
vbak.
Variablen und int. Tabellen *****************************************
data: l_vbeln like vbak-vbeln,
l_auart like vbak-auart,
l_augru like vbak-augru.
data: afield type slis_fieldcat_alv,
sp_group type slis_sp_group_alv,
t_listheader type slis_t_listheader with header line,
t_layout type slis_layout_alv,
t_fieldcat type slis_t_fieldcat_alv,
t_spec_groups type slis_t_sp_group_alv,
event type slis_alv_event,
t_events type slis_t_event,
g_variant like disvariant,
gx_variant like disvariant,
g_exit(1) type c,
g_save(1) type c,
g_repid like sy-repid,
msgtyp like sy-msgty,
lt_dynpread like dynpread occurs 1 with header line,
ls_rpcak like rpcak, "note 0310592
packsize type i value 1000,
text1(60) type c,
text2(60) type c,
oldkokrs like glpca-kokrs,
oldracct like glpca-racct.
data: whr_size type i value 50,"Maximum of single values per MIC 46a
"charact. in the where-clause of the select-statement
lines type i, "number of lines of range table MIC 46a
cnt_rldnr type i, "Zähler Anzahl selektierter Ledger
cnt_kokrs type i, "Zähler Anzahl selektierter KoReKreise
cnt_poper type i, "Zähler Anzahl selektierter Perioden
cnt_ryear type i, "Zähler Anzahl selektierter GeschJahre
cnt_rvers type i, "Zähler Anzahl selektierter Versionen
cnt_bukrs type i, "Zähler Anzahl selektierter BuKreise
empge like dkobr-empge,
ksl_curr like tka01-pcacur,
hsl_curr like t001-waers,
a_rec like rstirec.
data: begin of dim_data.
include structure rgcdi. "data for dimensions
data: end of dim_data.
data: begin of tab_fields occurs 80,
name like dntab-fieldname, "fields in table i_glpca
end of tab_fields.
data: begin of i_glpca occurs 0.
include structure rpca2.
data: racct_ktext like rpcak-ktext,
psppp like prps-posid,
v_auart like vbak-auart,
v_augru like vbak-augru,
end of i_glpca.
data: rw_subrc like sy-subrc, "Flag: Report-Writer-Schnittstelle
re_subrc like sy-subrc, "Flag: Recherche-Schnittstelle
subrc like sy-subrc.
data: set_id like sethier-setid, "Set-ID "RDI_SETS_4.0
set_class like sethier-setclass, "Setklasse "RDI_SETS_4.0
set_sname like sethier-shortname."Setname (24) "RDI_SETS_4.0
data: authorised(1),
s_message(1),
auth_dbcount like sy-tabix,
Hex-Konstanten für Minimum/Maximum-Werte
begin of hex00,
x1(12) type c,
x2(12) type c,
end of hex00,
begin of hexff,
x1(12) type c,
x2(12) type c,
end of hexff.
ranges rclnt for glpca-rclnt.
field-symbols: type ecarc_glpca_curr.
Selektionsoptionen *************************************************
select-options:
rldnr for glpca-rldnr default '8A' no-display,
rassc for glpca-rassc no-display,
rrcty for glpca-rrcty default 0,
rrcty for glpca-rrcty,
rvers for glpca-rvers default '000',
kokrs for glpca-kokrs memory id cac,
bukrs for glpca-rbukrs memory id buk,
poper for glpca-poper default sy-datlo+4(2),
ryear for glpca-ryear default sy-datlo,
poper for glpca-poper,
ryear for glpca-ryear,
prctr for glpca-rprctr matchcode object prct,
pprctr for glpca-sprctr matchcode object prct,
RACCT FOR GLPCA-RACCT MATCHCODE OBJECT KART, "RD_P30K128304
racct for glpca-racct, "RD_P30K128304
drcrk for glpca-drcrk,
activ for glpca-activ,
rhoart for glpca-rhoart,
rfarea for glpca-rfarea,
stagr for glpca-stagr,
rtcur for glpca-rtcur,
runit for glpca-runit,
versa for glpca-versa no-display,
eprctr for glpca-eprctr no-display,
afabe for glpca-afabe no-display,
rmvct for glpca-rmvct no-display,
hrkft for glpca-hrkft no-display, "note 550972
sbukrs for glpca-sbukrs no-display, "note 550972
shoart for glpca-shoart no-display, "note 550972
sfarea for glpca-sfarea no-display, "note 550972
docct for glpca-docct,
docnr for glpca-docnr,
refdocct for glpca-refdocct,
refdocnr for glpca-refdocnr,
werks for glpca-werks,
repmatnr for glpca-rep_matnr matchcode object pca_shlp_rep_matnr,
rscope for glpca-rscope.
parameters: no_rrint no-display default ' '." skip "MICP40K066037
" report-report-interface
display variant ">>MICP40K039857
selection-screen begin of block 0 with frame title text-e01.
parameters: p_vari like disvariant-variant.
selection-screen comment 47(40) varname for field p_vari.
selection-screen end of block 0.
parameters log_grp(4) type c no-display default 'KE5Z'.
"<<MICP40K039857
ranges: v_racct for glpca-racct,
v_prctr for glpca-rprctr,
v_pprctr for glpca-sprctr.
Tabelle mit Werten aus den Berichts-Set vom Report-Writer *
data begin of val_tab occurs 50.
include structure rgciv.
data end of val_tab.
MICP30K166368
feldkatalog und interface für bb-schnittstelle rw MICP30K166368
MICP30K166368
"MICP30K166368
data begin of bbs_fieldtab occurs 20. "MICP30K166368
include structure rstifields. "MICP30K166368
data end of bbs_fieldtab. "MICP30K166368
archiv
type-pools: rsds.
types: begin of ty_archive_objects,
object like arch_obj-object,
end of ty_archive_objects,
ty_t_archive_objects type ty_archive_objects occurs 2.
constants: lc_set type c value 'X',
lc_report type progname value 'KE5Z',
lc_reporttype type reporttype value 'TR'.
tables: admi_files.
select-options lr_files for admi_files-archiv_key no-display.
parameter: read_db type c default 'X' no-display,
read_ar type c no-display,
arc_obj like arch_obj-object no-display,
read_as type c default 'X' no-display.
data : lt_arch_obj type ty_t_archive_objects with header line,
ls_selections type rsds_frange,
lt_selections type rsds_frange_t,
ls_selopt type rsdsselopt,
lt_glpca_archiv type ecarc_t_glpca_curr.
*********************************************************>>MICP40K039857
INITIALIZATION
initialization.
Diverse Initialisierungen
perform init_vars.
g_repid = sy-repid.
Set default values for record type
rrcty-sign = 'I'.
rrcty-option = 'EQ'.
rrcty-low = '0'.
append rrcty.
rrcty-low = '2'.
append rrcty.
Set default values for period and year (if kokrs or bukrs is known)
get parameter id 'BUK' field bukrs-low.
get parameter id 'CAC' field kokrs-low.
if kokrs-low is initial "get contr. area from company code
and not bukrs-low is initial.
call function 'KOKRS_GET_FROM_BUKRS'
exporting
i_bukrs = bukrs-low
importing
e_kokrs = kokrs-low
exceptions
no_kokrs_found = 1
others = 2.
if sy-subrc <> 0.
clear kokrs-low.
endif.
endif.
if not kokrs-low is initial.
call function 'K_KOKRS_READ' "get fiscal year variant
exporting
kokrs = kokrs-low
importing
e_tka01 = tka01
exceptions
not_found = 1
not_found_gjahr = 2
others = 3.
if sy-subrc = 0.
call function 'G_PERIOD_GET'
exporting
date = sy-datlo
variant = tka01-lmona
importing
period = poper-low
year = ryear-low
exceptions
ledger_not_assigned_to_company = 1
period_not_defined = 2
variant_not_defined = 3
others = 4.
if sy-subrc = 0.
poper-sign = 'I'.
poper-option = 'EQ'.
append poper.
ryear-sign = 'I'.
ryear-option = 'EQ'.
append ryear.
endif.
endif.
endif.
Settings for display variants
g_save = 'A'. "Schalter Varianten benutz./allg. speichern
clear g_variant.
g_variant-report = g_repid.
g_variant-log_group = log_grp.
g_variant-username = sy-uname.
Get default variant
gx_variant = g_variant.
call function 'REUSE_ALV_VARIANT_DEFAULT_GET'
exporting
i_save = g_save
changing
cs_variant = gx_variant
exceptions
not_found = 2.
if sy-subrc = 0.
p_vari = gx_variant-variant.
endif.
Set variant
if p_vari is initial.
p_vari = '1SAP'.
move p_vari to gx_variant-variant.
call function 'REUSE_ALV_VARIANT_EXISTENCE'
exporting
i_save = g_save
changing
cs_variant = gx_variant
exceptions
not_found = 1.
if sy-subrc ne 0.
clear p_vari.
clear gx_variant-variant.
endif.
endif.
varname = gx_variant-text.
"<<MICP40K039857
archiv
call function 'KARL_DATA_INPUT_INIT'
exporting
i_report = lc_report
i_reporttype = lc_reporttype
importing
e_xusedb = read_db
e_xusear = read_ar
e_archobj = arc_obj
e_infosys = read_as
tables
t_arch_sel = lr_files.
data: lt_excluding like sy-ucomm occurs 0 with header line.
call function 'RS_SET_SELSCREEN_STATUS'
exporting
p_status = 'SELSCREEN'
p_program = 'RCOPCA02'
tables
p_exclude = lt_excluding.
Initialisieren der Bericht/Bericht-Schnittstellen *
data: ld_no_rrint type boole_d. "note 490484 begin
import rri = ld_no_rrint from memory id 'RCOPCA02_NO_RRI'.
if ld_no_rrint = 'X'.
free memory id 'RCOPCA02_NO_RRI'.
else. "note 490484 end
call function 'G_REPORT_INTERFACE_INIT' "Report-Writer?
exporting "MICP30K166368
table = 'GLPCT' "MICP30K166368
importing
subrc = rw_subrc "MICP30K166368
tables "MICP30K166368
it_fieldr = bbs_fieldtab. "MICP30K166368
call function 'RSTI_APPL_STACK_POP'"oder Recherche?
importing
i_rec = a_rec
exceptions
appl_stack_not_initialized = 1.
re_subrc = sy-subrc.
if re_subrc = 0.
check Receiver is this report
if not ( ( a_rec-rtool = 'RT' and a_rec-ronam = 'RCOPCA02' )
or ( a_rec-rtool = 'TR' and a_rec-ronam = 'KE5Z' ) ) .
re_subrc = 2.
endif.
endif.
endif.
AT SELCTION-SCREEN on value request**********************************
*at selection-screen on value-request for racct-low. "RD "4.6a
"RD "4.6a
call function 'K_RACCT_VALUE_REQUEST' "RD "4.6a
importing "RD "4.6a
e_racct = racct-low. "RD "4.6a
"RD "4.6a
"RD "4.6a
*at selection-screen on value-request for racct-high. "RD "4.6a
"RD "4.6a
call function 'K_RACCT_VALUE_REQUEST' "RD "4.6a
importing "RD "4.6a
e_racct = racct-high. "RD "4.6a
at selection-screen on value-request for p_vari. "MICP40K039857
perform f4_for_variant. "MICP40K039857
at selection-screen on value-request for poper-low. "RD "4.6a
begin of insertion note 522715
call function 'K_KOKRS_READ'
exporting
kokrs = kokrs-low
exceptions
not_found = 1
not_found_gjahr = 2
others = 3.
if sy-subrc = 0.
end of insertion note 522715
call function 'ECPCA_RPMAX_VALUE_REQUEST' "RD "4.6a
exporting "RD "4.6a
i_kokrs = kokrs-low "RD "4.6a
i_ryear = ryear-low "RD "4.6a
importing "RD "4.6a
e_rpmax = poper-low "RD "4.6a
begin of insertion note 522715
exceptions
table_empty = 1.
endif.
end of insertion note 522715
at selection-screen on value-request for poper-high. "RD "4.6a
begin of insertion note 522715
call function 'K_KOKRS_READ'
exporting
kokrs = kokrs-low
exceptions
not_found = 1
not_found_gjahr = 2
others = 3.
if sy-subrc = 0.
end of insertion note 522715
call function 'ECPCA_RPMAX_VALUE_REQUEST' "RD "4.6a
exporting "RD "4.6a
i_kokrs = kokrs-low "RD "4.6a
i_ryear = ryear-low "RD "4.6a
importing "RD "4.6a
e_rpmax = poper-high "RD "4.6a
begin of insertion note 522715
exceptions
table_empty = 1.
endif.
end of insertion note 522715
AT SELCTION-SCREEN ***************************************************
at selection-screen.
perform pai_of_selection_screen.
begin of insertion note 522715
if not kokrs-low is initial.
call function 'K_KOKRS_READ'
exporting
kokrs = kokrs-low
exceptions
not_found = 1
not_found_gjahr = 2
others = 3.
if sy-subrc <> 0.
message e101(ki) with kokrs-low.
endif.
endif.
end of insertion note 522715
archiv
if sy-ucomm = 'FC01' or sy-ucomm = 'UCDS'
or sy-ucomm = 'ONLI' and read_ar = 'X'
and read_as is initial and lr_files[] is initial.
if lt_arch_obj[] is initial.
lt_arch_obj-object = 'PCA_OBJECT'. append lt_arch_obj.
lt_arch_obj-object = 'EC_PCA_ITM'. append lt_arch_obj.
endif.
call function 'KARL_DATA_INPUT_SELECT'
exporting
i_db_and_arc = lc_set
i_infosys_possible = lc_set
i_object_fixed = 'V'
i_documentation = 'KARL_DATA_INPUT_SEL_KE5YZ'
i_report = lc_report
i_reporttype = lc_reporttype
tables
t_objects = lt_arch_obj
t_arch_sel = lr_files
changing
c_xusedb = read_db
c_xusear = read_ar
c_archobj = arc_obj
c_infosys = read_as.
endif.
START-OF-SELECTION **************************************************
start-of-selection.
Default-Werte löschen, falls Aufruf über Recherche
oder Report-Writer erfolgt ist
if no_rrint is initial and ld_no_rrint is initial. "note 490484
if rw_subrc eq 0 or re_subrc eq 0.
refresh: rldnr, rrcty, rvers, kokrs, bukrs, poper, ryear,
racct, prctr, pprctr, drcrk, activ, rhoart, rfarea,
versa, afabe, eprctr,
v_racct, v_prctr, v_pprctr.
clear: rldnr, rrcty, rvers, kokrs, bukrs, poper, ryear,
racct, prctr, pprctr, drcrk, activ, rhoart, rfarea,
versa, afabe, eprctr,
v_racct, v_prctr, v_pprctr.
endif.
Parameter einlesen über Report-Writer-Schnittstelle *
if rw_subrc eq 0.
perform rw_get_parameters.
oder Parameter einlesen über Recherche-Schnittstelle *
elseif re_subrc eq 0.
perform re_get_parameters.
endif.
endif.
if read_db = 'X'. " read from DB (archiv)
Bewegungsdaten einlesen und puffern...................................
call function 'SAPGUI_PROGRESS_INDICATOR'
exporting
text = 'Einzelposten selektieren'(p10).
Use dirty trick to mislead DB-optimizer
call function 'DB_DO_NOT_USE_CLIENT_INDEX'
exporting
value = sy-mandt
tables
mandttab = rclnt.
select (tab_fields) from glpca
client specified
package size packsize
APPENDING CORRESPONDING FIELDS OF TABLE i_glpcaO
into corresponding fields of table i_glpca
where rldnr in rldnr
and rrcty in rrcty
and rvers in rvers
and kokrs in kokrs
and rbukrs in bukrs
and ryear in ryear
and rassc in rassc
and hrkft in hrkft "note 550972
and sbukrs in sbukrs "note 550972
and shoart in shoart "note 550972
and sfarea in sfarea "note 550972
and racct in racct
and rprctr in prctr
and sprctr in pprctr
and poper in poper
and drcrk in drcrk
and activ in activ
and rhoart in rhoart
and rfarea in rfarea
and versa in versa
and eprctr in eprctr
and afabe in afabe
and rmvct in rmvct
and docct in docct
and docnr in docnr
and stagr in stagr
and rtcur in rtcur
and runit in runit
and refdocct in refdocct
and refdocnr in refdocnr
and werks in werks
and rep_matnr in repmatnr "RDIP40K020663
and rscope in rscope "RDIP40K020663
and rclnt in rclnt. "dirty trick to mislead DB-optimizer
if sy-dbcnt > 1.
text1 = sy-dbcnt.
condense text1.
concatenate text1 text-m01 into text2 separated by space.
call function 'SAPGUI_PROGRESS_INDICATOR'
exporting
text = text2. " ... Datensätze gelesen
endif.
endselect.
Entfernt nicht zugehörige Einträge....................................
loop at i_glpca where ( not rprctr in v_prctr )
or ( not sprctr in v_pprctr )
or ( not racct in v_racct ).
delete i_glpca.
endloop.
endif.
*archiv
if read_ar = 'X' and not
( read_as is initial and lr_files[] is initial ).
call function 'SAPGUI_PROGRESS_INDICATOR'
exporting
text = 'Lesen im Archiv'(p12).
define fill_lt_selections.
if not &2[] is initial.
clear ls_selections.
move &1 to ls_selections-fieldname.
loop at &2.
clear ls_selopt.
move-corresponding &2 to ls_selopt.
append ls_selopt to ls_selections-selopt_t.
endloop.
append ls_selections to lt_selections.
endif.
end-of-definition.
fill_lt_selections 'RLDNR' rldnr.
fill_lt_selections 'RRCTY' rrcty.
fill_lt_selections 'RVERS' rvers.
fill_lt_selections 'KOKRS' kokrs.
fill_lt_selections 'RBUKRS' bukrs.
fill_lt_selections 'POPER' poper.
fill_lt_selections 'RYEAR' ryear.
fill_lt_selections 'RPRCTR' prctr.
fill_lt_selections 'SPRCTR' pprctr.
fill_lt_selections 'RACCT' racct.
fill_lt_selections 'DRCRK' drcrk.
fill_lt_selections 'ACTIV' activ.
fill_lt_selections 'RHOART' rhoart.
fill_lt_selections 'RFAREA' rfarea. "note 401961
fill_lt_selections 'STAGR' stagr.
fill_lt_selections 'RTCUR' rtcur.
fill_lt_selections 'RUNIT' runit.
fill_lt_selections 'VERSA' versa.
fill_lt_selections 'EPRCTR' eprctr.
fill_lt_selections 'AFABE' afabe.
fill_lt_selections 'RMVCT' rmvct.
fill_lt_selections 'DOCCT' docct.
fill_lt_selections 'DOCNR' docnr.
fill_lt_selections 'REFDOCCT' refdocct.
fill_lt_selections 'REFDOCNR' refdocnr.
fill_lt_selections 'WERKS' werks.
fill_lt_selections 'REP_MATNR' repmatnr.
fill_lt_selections 'RSCOPE' rscope.
fill_lt_selections 'HRKFT' hrkft. "note 550972
fill_lt_selections 'SBUKRS' sbukrs. "note 550972
fill_lt_selections 'SHOART' shoart. "note 550972
fill_lt_selections 'SFAREA' sfarea. "note 550972
call function 'EC_PCA_SELECT_FROM_ARCHIVE'
exporting
i_selections = lt_selections[]
i_files_sequential_read = lr_files[]
importing
e_glpca = lt_glpca_archiv[]
exceptions
no_infostruc_found = 1.
if sy-subrc = 1.
message id sy-msgid type 'I' number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
clear i_glpca.
loop at lt_glpca_archiv assigning to i_glpca.
append i_glpca.
endloop.
endif.
if i_glpca[] is initial. "Info,nichts gefunden
message s000.
exit.
endif.
get texts for accounts ...............................................
sort i_glpca by kokrs racct.
loop at i_glpca assigning -racct_ktext = ls_rpcak-ktext.
endloop.
Liste mit Einzelposten geeignet sortieren.............................
call function 'SAPGUI_PROGRESS_INDICATOR'
exporting
text = 'Einzelposten sortieren'(p30).
if show_ref is initial.
sort i_glpca by rldnr ryear rbukrs rrcty rvers
docct docnr docln.
else.
sort i_glpca by rldnr kokrs ryear rbukrs rrcty rvers poper
refdocct refdocnr refdocln.
endif.
Berechtigungsprüfung und gemerkte Belege aufbereiten .................
call function 'SAPGUI_PROGRESS_INDICATOR'
exporting
text = 'Berechtigungsprüfungen'(p40).
clear: cnt_rldnr, cnt_kokrs, cnt_ryear, cnt_rvers, cnt_bukrs.
loop at i_glpca assigning .
Berechtigungscheck
perform check_repo_authority changing authorised.
if authorised is initial.
delete i_glpca.
s_message = 'X'.
zählen der Sätze ohne Berechtigung
auth_dbcount = auth_dbcount + 1.
else. "Weitere Bearbeitung nur für berechtigte Belege...
Zusätzlich merken der Anzahl der Ausprägungen
bestimmter Dimensionen
on change of -rbukrs
ct = '10'
importing
currency = hsl_curr.
endon.
externe Immobilienbezeichnung "ww/kb
on change of i_glpca-imkey.
if ( not -dabrz
I_length = 20
importing
e_empge = -konty.
endif.
CONCATENATE I_GLPCA-KONTY I_GLPCA-EMPGE INTO I_GLPCA-IMBEZ.
endif.
endon.
on change of i_glpca-dabrz.
call function 'REMD_IMKEY_TO_EMPGE'
exporting
i_imkey = i_glpca-imkey
i_dabrz = i_glpca-dabrz
i_length = 20
importing
e_empge = i_glpca-empge
e_konty = i_glpca-konty.
CONCATENATE I_GLPCA-KONTY I_GLPCA-EMPGE INTO I_GLPCA-IMBEZ.
endon.
Konvertierungsproblem mit PSP-Nummer bereinigen
if not -psppp.
endif.
endif.
Währungen in Hilfsfeldern speichern
if -ksl_curr = ksl_curr.
endif.
modify i_glpca.
endif.
endloop.
Nachricht, wenn nicht alle Einzelposten angezeigt werden.
if not s_message is initial.
message s407(km) with auth_dbcount.
endif.
EP ausgeben...........................................................
call function 'SAPGUI_PROGRESS_INDICATOR'
exporting
text = 'Einzelposten ausgeben'(p50).
t_layout-detail_initial_lines = 'X'.
t_layout-detail_popup = 'X'.
t_layout-f2code = 'PIC1'. "MICP40K039857
t_layout-get_selinfos = 'X'.
t_layout-group_change_edit = 'X'. "note 576149
perform fill_listheader.
perform fieldcat_fill.
perform spec_groups_fill.
perform events_fill. "MICP40K039857
">>MICP40K039857
call function 'K_KKB_LIST_DISPLAY'
exporting
i_callback_program = 'RCOPCA02'
i_callback_user_command = 'USR_CMD'
i_callback_top_of_page = 'TOP_OF_PAGE'
I_CALLBACK_END_OF_PAGE =
I_CALLBACK_END_OF_LIST =
i_callback_pf_status_set = 'SET_PF_STATUS'
I_CALLBACK_LAYOUT_SAVE =
I_CALLBACK_FIELDCAT_SAVE =
i_tabname = 'I_GLPCA'
is_layout = t_layout
it_fieldcat = t_fieldcat
I_FCTYPE = 'R'
IT_EXCLUDING =
it_special_groups = t_spec_groups
IT_SORT =
IS_SEL_HIDE =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
tables
t_outtab = i_glpca
exceptions
others = 1.
loop at i_glpca.
select single vbeln auart augru
into (l_vbeln, l_auart, l_augru)
from vbak where vbeln = i_glpca-aubel.
if sy-subrc = 0.
move l_auart to i_glpca-v_auart.
move l_augru to i_glpca-v_augru.
modify i_glpca.
endif.
endloop.
call function 'REUSE_ALV_GRID_DISPLAY'
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
exporting
I_INTERFACE_CHECK = ' '
i_callback_program = 'ZRCOPCA02'
i_callback_pf_status_set = 'SET_PF_STATUS'
i_callback_user_command = 'USR_CMD'
i_structure_name = 'I_GLPCA'
is_layout = t_layout
it_fieldcat = t_fieldcat
IT_EXCLUDING =
it_special_groups = t_spec_groups
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
i_default = 'X'
i_save = g_save
is_variant = g_variant
it_events = t_events
IT_EVENT_EXIT =
IS_PRINT =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
tables
t_outtab = i_glpca
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
"<<MICP40K039857
clear i_glpca.
*& Form CHECK_REPO_AUTHORITY
Check only new auth-object K_PCA *
--> p1 text
<-- p2 text
form check_repo_authority changing authorized like authorised.
fill structure for userexit in K_PCA_RESP_AUTHORITY_CHECK
data: auth like pca_i_auth. "46a MIC check K_PCA and G_GLTP
auth-bukrs = -rrcty.
clear authorized.
check PrCtr/account/activity
call function 'K_PCA_RESP_AUTHORITY_CHECK'
exporting
i_kokrs = -racct
i_vorgn = 'REPP'
i_actvt = '28'
i_auth = auth
i_no_dialog_message = 'X'
exceptions
no_authority = 1
data_missing = 2
others = 3.
if sy-subrc = 0. "ok
check ledger/version/record type
call function 'PCA_G_GLTP_AUTH_CHECK'
exporting
rldnr = -rrcty
exceptions
no_authorisation = 1
others = 2.
if sy-subrc = 0. "ok, User is authorized
authorized = 'X'.
endif.
endif.
endform. " CHECK_REPO_AUTHORITY
*& Form INIT_VARS
Initialisieren diverser Hilfsvariablen und -tabellen *
form init_vars.
data begin of nametab occurs 80. "Tabelle mit Feldern aus der RPCA2
include structure dntab.
data end of nametab.
select single * from t000
client specified
where mandt = sy-mandt.
refresh nametab.
call function 'NAMETAB_GET'
exporting
only = 'T'
tabname = 'RPCA2'
tables
nametab = nametab.
Übernehmen der Feldnamen, die auch in der GLPCA
vorkommen.
loop at nametab where fieldname ne 'KSL_CURR'
and fieldname ne 'HSL_CURR'
and fieldname ne 'EMPGE' "ww/kb
and fieldname ne 'KONTY'. "ww/kb
move nametab-fieldname to tab_fields-name.
append tab_fields.
endloop.
fill Fields of receiver for BBS "MIC46C
call function 'RSTI_REPORT_FIELDS_FIND'
exporting
e_repid = 'RCOPCA02'
e_type = 'R'
tables
it_fields = bbs_fieldtab.
correct fieldnames
read table bbs_fieldtab with key rfield = 'PRCTR'.
if sy-subrc = 0.
bbs_fieldtab-rfield = 'RPRCTR'.
modify bbs_fieldtab index sy-tabix.
endif.
read table bbs_fieldtab with key rfield = 'PPRCTR'.
if sy-subrc = 0.
bbs_fieldtab-rfield = 'SPRCTR'.
modify bbs_fieldtab index sy-tabix.
endif.
read table bbs_fieldtab with key rfield = 'BUKRS'.
if sy-subrc = 0.
bbs_fieldtab-rfield = 'RBUKRS'.
modify bbs_fieldtab index sy-tabix.
endif.
Unicode
class cl_abap_char_utilities definition load.
clear hex00 with cl_abap_char_utilities=>minchar.
clear hexff with cl_abap_char_utilities=>maxchar.
endform. " INIT_VARS
FORM FILL_LISTHEADER *
List-Header in Abhängigkeit der selektierten Daten *
form fill_listheader.
read table i_glpca index 1.
if sy-subrc ne 0.
exit.
endif.
t_listheader-typ = 'S'.
t_listheader-key = 'Ledger '(h01).
if cnt_rldnr <= 1.
t_listheader-info = i_glpca-rldnr.
else.
t_listheader-info = '*'.
endif.
append t_listheader.
t_listheader-typ = 'S'.
t_listheader-key = 'Kostenrechnungskreis'(h02).
if cnt_kokrs <= 1.
t_listheader-info = i_glpca-kokrs.
else.
t_listheader-info = '*'.
endif.
append t_listheader.
t_listheader-typ = 'S'.
t_listheader-key = 'Buchungskreis '(h03).
if cnt_bukrs <= 1.
t_listheader-info = i_glpca-rbukrs.
else.
t_listheader-info = '*'.
endif.
append t_listheader.
t_listheader-typ = 'S'.
t_listheader-key = 'Buchungsperiode '(h04).
if cnt_poper <= 1.
t_listheader-info = i_glpca-poper.
else.
t_listheader-info = '*'.
endif.
append t_listheader.
if cnt_ryear <= 1.
t_listheader-typ = 'S'.
t_listheader-key = 'Geschäftsjahr '(h05).
t_listheader-info = i_glpca-ryear.
append t_listheader.
endif.
t_listheader-typ = 'S'.
t_listheader-key = 'Version '(h06).
if cnt_rvers <= 1.
t_listheader-info = i_glpca-rvers.
else.
t_listheader-info = '*'.
endif.
append t_listheader.
endform. "fill_listheader
*& Form FIELDCAT_FILL
*& Aufbau des Feldkataloges für den K_KKB_LIST_DISPLAY, *
*& bzw REUSE_ALV_LIST_DISPLAY, *
*& weitere Infos enthält die FktBaustein-Doku *
form fieldcat_fill.
data: i type i value 0.
refresh t_fieldcat.
Ledger
if cnt_rldnr > 1.
add 1 to i.
clear afield.
afield-col_pos = i.
afield-fieldname = 'RLDNR'.
afield-no_sum = 'X'.
afield-no_out = 'X'.
afield-key = 'X'.
afield-ref_tabname = 'GLPCA'.
afield-sp_group = '1'.
append afield to t_fieldcat.
endif.
Satzart
add 1 to i.
clear afield.
afield-col_pos = i.
afield-fieldname = 'RRCTY'.
afield-no_sum = 'X'.
afield-ref_tabname = 'GLPCA'.
afield-no_out = 'X'.
afield-sp_group = '1'.
append afield to t_fieldcat.
Version
if cnt_rvers > 1.
add 1 to i.
clear afield.
afield-col_pos = i.
afield-fieldname = 'RVERS'.
afield-no_sum = 'X'.
afield-ref_tabname = 'GLPCA'.
afield-no_out = 'X'.
afield-sp_group = '1'.
append afield to t_fieldcat.
endif.
Periode
if cnt_poper > 1.
add 1 to i.
clear afield.
afield-col_pos = i.
afield-fieldname = 'POPER'.
afield-no_sum = 'X'.
afield-ref_tabname = 'GLPCA'.
afield-no_out = 'X'.
afield-sp_group = '1'.
append afield to t_fieldcat.
endif.
Geschäftsjahr
if cnt_ryear > 1.
add 1 to i.
clear afield.
afield-col_pos = i.
afield-fieldname = 'RYEAR'.
afield-no_sum = 'X'.
afield-ref_tabname = 'GLPCA'.
afield-no_out = 'X'.
afield-sp_group = '1'.
append afield to t_fieldcat.
endif.
Referenzbelegtyp
add 1 to i.
clear afield.
afield-col_pos = i.
afield-fieldname = 'REFDOCCT'.
afield-ref_tabname = 'GLPCA'.
afield-key_sel = 'X'.
afield-no_sum = 'X'.
afield-sp_group = '2'.
afield-seltext_s = 'Typ'(t01).
afield-seltext_m = 'Belegtyp'(t02).
afield-seltext_l = 'Ref.Belegtyp'(t03).
afield-outputlen = 3. "Platz für die Sterne der Zwischensummen
if not show_ref is initial.
afield-key = 'X'.
else.
afield-no_out = 'X'.
endif.
append afield to t_fieldcat.
Referenzbelegnummer
add 1 to i.
clear afield.
afield-col_pos = i.
afield-fieldname = 'REFDOCNR'.
afield-ref_tabname = 'GLPCA'.
afield-key_sel = 'X'.
afield-no_sum = 'X'.
afield-sp_group = '2'.
afield-seltext_s = 'Refbeleg'(t04).
afield-seltext_m = 'Refbelegnr'(t05).
afield-seltext_l = 'Ref.Belegnummer'(t06).
if not show_ref is initial.
afield-key = 'X'.
else.
afield-no_out = 'X'.
endif.
appendHi Prabhu,
You are right, problem is with Field Catalog...
When I use FM 'REUSE_ALV_GRID_DISPLAY' it is dumping...
When i tried with FM 'REUSE_ALV_LIST_DISPLAY' it is working perfectly....
how can i use FM 'REUSE_ALV_GRID_DISPLAY' without dumping????
do i need to pass any thing in FM????
Here is the dump:
Runtime Errors MESSAGE_TYPE_X
Occurred on 12/21/2006 at 01:03:24
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
Error analysis
Short text of error message:
Technical information about the message:
Message classe...... "0K "
Number.............. 000
User, transaction...
Language key........ "E"
Transaction......... "SE38 "
Program............. "SAPLSLVC "
Screen.............. "SAPLSLVC_FULLSCREEN 0500"
Screen line......... 3
Information on where termination occurred
The termination occurred in the ABAP program "SAPLSLVC " in "LINE_OUT_NEW_2".
The main program was "ZRCOPCA02 ".
The termination occurred in line 918 of the source code of the (Include)
program "LSLVCF01 "
of the source code of program "LSLVCF01 " (when calling the editor 9180).
Source code extract
008880 gs_roid-row_id = rs_row-index * -1.
008890 endif.
008900 gs_roid-sub_row_id = rs_row-rowtype+7(10).
008910 gs_poid-row_id = gs_roid-row_id.
008920 gs_poid-sub_row_id = gs_roid-sub_row_id.
008930 gs_poid-rowtype = rs_row-rowtype.
008940 gs_poid-index = rs_row-index.
008950 insert gs_poid into table rt_poid.
008960 endif.
008970 append gs_roid to rt_roid.
008980
008990 loop at rt_fieldcat assigning <ls_fieldcat> where tech ne 'X' and
009000 no_out ne 'X'.
009010
009020 if gflg_invisible = 'X'.
009030 if <ls_fieldcat>-do_sum is initial.
009040 clear gflg_invisible.
009050 continue.
009060 else.
009070 clear g_col_counter.
009080 clear gflg_invisible.
009090 endif.
009100 endif.
009110
009120 clear gs_lvc_data.
009130 clear g_style.
009140
009150 assign component
009160 <ls_fieldcat>-fieldname of structure rt_data to <g_field>.
009170 if sy-subrc ne 0.
> message x000(0k).
009190 endif.
009200
009210 g_col_counter = g_col_counter + 1.
009220
009230 gs_lvc_data-row_pos = r_row_counter.
009240 gs_lvc_data-col_pos = g_col_counter.
009250 gs_lvc_data-row_id = gs_roid-row_id.
009260 gs_lvc_data-sub_row_id = gs_roid-sub_row_id.
009270
009280 * Endtotal and average
009290 if rs_row-rowtype(1) ca 'T' and <ls_fieldcat>-do_sum = 'C'.
009300 * save the actual grouplevel information
009310 gs_grouplevels = rs_grouplevels.
009320 clear g_lines.
009330
009340 * get number of lines of the collect table
009350 describe table rt_data lines g_lines.
009360 * if there is only one line or the field has no references so
009370 * that only the first line has to be considered
Thanks,
fractal
null -
Change of Search help for location field in report incident
Hi All,
i have added new fields Region,BSA in the report incident form .here based on the region entered in the search help the corresponding bsa have to be displayed in the search help of BSA .these are achieved customising the search help exit FM EHFND_SHLP_EXIT_F4_BOBF_QUERY.
similarly based on the BSA entered in the BSA field Location field search help should filter the values and display .the isues here are
1. the location field and search help attached are standard and they are being used in many instances .
2.when i click on the f4 help the control doesnt stop any where in the feeder class CL_EHHSS_INC_Q_LOC_UI_FRM of the form though i put the breakpoints .ie the event on enter locid is not getting triggered.
my question is where can i write the code to filter the values being displayed in the location search help.
Thanks&Regards
LuxmiHi Luxmi,
Dictionary-based search helps are triggered from directly within the WDA layer. Therefore, there is no callback from the FPM event loop. The filter would need to be implemented as an implicit enhancement of the aforementioned search help exit function.
Thanks,
James -
Programmatically change the query used to generate Oracle Reports
I have two queries. Depending on some parameter value, I would like to use one of these queries to generate my report. Is it possible to programmatically change the SQL query used to generate the Oracle Report.
ThanksThere are two options:
- The easy way
In the report paper layout create two frames, one for each query , and at runtime
display only one based on your parameters. (using format triggers on the frames)
- the not so easy way (but more elegant)
create the query at runtime using xml customizations using the examples from
the following documentation:
http://download-
uk.oracle.com/docs/cd/B14099_17/bi.1012/b14048/pbr_xml.htm#i1006734
16.3 Creating XML Data Models
16.4.1.3 Applying an XML Report Definition in PL/SQL
16.4.1.3.2 Applying an XML Definition Stored in Memory
Regards and Good Luck
Ionut S -
How to change the location value after it is registered
hello,
I want to change the location (A) to a new schema. From what I am understanding, I need to unregister the old locatin(A) in repository browser, and then re-register it in control center, and change the schema name to my new target.
Now, I have unregisted A in the repository browser. When I come back to control center, and click the register, everything is grey out which means I cannot change the value (but i need to change the value for service name and schema), except the password value. and on the top, it says 'this location has not been registered. please complete the location parameters'.But I know on the old version, like owb 9.0.5, the grey out means this location is registered. So I am really comfused now. The location is unregisted, why cant I change the value of this location?
any suggestion will be appreciated.Here is what I was referring to - when in Control Center, I have the database locations. (sources, targets, OWF etc). Under a database location I selected the connector/location name under Connectors. When I select Deploy Action to Drop the connector/location name will remain. However, if you were to check in the database or the Repository Browser (Locations Report) you will see that the db link is gone. At this point you can safely modify the Locations info in the Connection Explorer (in Design Center). On the other hand, if you want the location to be deleted all together then now you can delete it in the Connection Explorer panel. If you did the prior drop step then at this point all db link info should be gone from the database.
-
Apex 4.0: Change the Search Field to a Multi Value Check Box IR
I am new here, but hoping to be active :)
Well, now I am focusing on Apex 4 and I find really new things here. And even new order to develope needs time to get used.
Still, I am trying to change the Search Field to a Multi Value Check Box in IR. I have found how to make it in Apex version 3, but not at 4 any more.
Tutorials for apex v.3 write:
1.Click Edit Page 1 on the Developer toolbar.
The Page Definition for page 1 appears.
2. Under Items, click P1_REPORT_SEARCH.
3. From Display As, select Checkbox ans so on...
But I do not find any word "Items" in IR and especially P1_REPORT_SEARCH (I assume this should be by default). Under "Report Atributes" I find "Search bar" region, just there is no option for that. Is here any way to make search with checkboxes in v4?Hi,
Tutorial you have check for APEX 3.x probably works still in APEX 4.x if you use classic report.
As I understand you have now create interactive report that provide out of box search features.
There is no option to change IR search text field to multi select item.
What you can do with IR, is hide/disable search field.
Then you create multi select item and use it in report query where clause.
Regards,
Jari
My Blog: http://dbswh.webhop.net/htmldb/f?p=BLOG:HOME:0
Twitter: http://www.twitter.com/jariolai -
Changing the description field in AP Invoice
Hi is it possible to change the description field in an 'open' posted AP or AR invoice? I assume you have to credit note the invoice and re enter it with the new line item description which seems a long way around when only the text is being changed and not the coding or amounts.
thanks judiHi,
All marketing documents, whether closed/open, do allow the user to change the remarks/narrantion. This field is located in the Footer Fields - left corner of the form.
Pls check out.
Assign points if useful.
Thanks,
Srikanth -
Who has changed the Custom Field value?
Dears,
Need to know the information regarding how to fetch that who has changed the Custom field value from PWA/MPP.
Example:
There is a PDP (say ProjectInfo):
There is a Custom Field added to that PDP (say Project Status = In Progress).
Now for ProjectA, someone has checked out and changed the Custom Field "Project Status" from "In Progress" to "Closed".
I need to fetch the information regarding who has changed that Custom field.
In which direction should I move: Event Handlers, PSI???? Any other stuff?
Thanks & Regards,
ShravanHi Shravan,
I'm not a developer but I do know that you can use an event handler pushing the resource name and date in custom fields.
Another way is to use a 3rd-party tool like
FluentPro Audit Tool.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller | -
Changing the location of archive log from flash recovery area PLZ HELP!!!
Hi All,
My archive log is being stored in flash memory area which got full and the production server went down.
alert log file details.....
ORA-19809: limit exceeded for recovery files
ORA-19804: cannot reclaim 43432960 bytes disk space from 2147483648 limit
*** 2010-04-25 14:22:49.777 62692 kcrr.c
ARCH: Error 19809 Creating archive log file to
'/oracle/product/10.2.0/flash_rec
overy_area/EDWREP/archivelog/2010_04_25/o1_mf_1_232_%u_.arc'
*** 2010-04-25 14:22:49.777 60970 kcrr.c
kcrrfail: dest:10 err:19809 force:0 blast:1I removed the files and started the database,
Can someone kindly tell me as to how to avoid this problem in future by keeping archive log destination in flash recovery area.
I want to change the location of archive log files, can someone please guide me as to hiow to do that
I changed the size of flash recovery area for the time being, but i am afraid it will be full again!!
SQL> select * from v$flash_recovery_area_usage;
FILE_TYPE PERCENT_SPACE_USED PERCENT_SPACE_RECLAIMABLE NUMBER_OF_FILES
CONTROLFILE 0 0 0
ONLINELOG 0 0 0
ARCHIVELOG 99.44 0 57
BACKUPPIECE 0 0 0
IMAGECOPY 0 0 0
FLASHBACKLOG 0 0 0
6 rows selected.
SQL> alter system set DB_RECOVERY_FILE_DEST_SIZE = 4G ;
System altered.
SQL> select * from v$flash_recovery_area_usage;
FILE_TYPE PERCENT_SPACE_USED PERCENT_SPACE_RECLAIMABLE NUMBER_OF_FILES
CONTROLFILE 0 0 0
ONLINELOG 0 0 0
ARCHIVELOG 49.72 0 57
BACKUPPIECE 0 0 0
IMAGECOPY 0 0 0
FLASHBACKLOG 0 0 0
6 rows selected.regards,
Edited by: user10243788 on Apr 25, 2010 6:12 AMuser10243788 wrote:
Hi All,
My archive log is being stored in flash memory area which got full and the production server went down.
alert log file details.....
ORA-19809: limit exceeded for recovery files
ORA-19804: cannot reclaim 43432960 bytes disk space from 2147483648 limit
*** 2010-04-25 14:22:49.777 62692 kcrr.c
ARCH: Error 19809 Creating archive log file to
'/oracle/product/10.2.0/flash_rec
overy_area/EDWREP/archivelog/2010_04_25/o1_mf_1_232_%u_.arc'
*** 2010-04-25 14:22:49.777 60970 kcrr.c
kcrrfail: dest:10 err:19809 force:0 blast:1I removed the files and started the database,
Can someone kindly tell me as to how to avoid this problem in future by keeping archive log destination in flash recovery area.
I want to change the location of archive log files, can someone please guide me as to hiow to do that
I changed the size of flash recovery area for the time being, but i am afraid it will be full again!!
SQL> select * from v$flash_recovery_area_usage;
FILE_TYPE PERCENT_SPACE_USED PERCENT_SPACE_RECLAIMABLE NUMBER_OF_FILES
CONTROLFILE 0 0 0
ONLINELOG 0 0 0
ARCHIVELOG 99.44 0 57
BACKUPPIECE 0 0 0
IMAGECOPY 0 0 0
FLASHBACKLOG 0 0 0
6 rows selected.
SQL> alter system set DB_RECOVERY_FILE_DEST_SIZE = 4G ;
System altered.
SQL> select * from v$flash_recovery_area_usage;
FILE_TYPE PERCENT_SPACE_USED PERCENT_SPACE_RECLAIMABLE NUMBER_OF_FILES
CONTROLFILE 0 0 0
ONLINELOG 0 0 0
ARCHIVELOG 49.72 0 57
BACKUPPIECE 0 0 0
IMAGECOPY 0 0 0
FLASHBACKLOG 0 0 0
6 rows selected.regards,
Edited by: user10243788 on Apr 25, 2010 6:12 AMPointing the archive log dest (and/or the FRA) to a new location, or enlarging them, will do no good if you are not performing regular housekeeping on the archivelogs. You will just keep knocking down the same problem over and over.
If you simply delete the archivelogs at the OS level, the database will never know about it and it will continue to think the destination is full, based on records kept in the control file.
For regular housekeeping, you need to be doing something similar to this in rman:
run {
backup archivelog all not backed up 1 times tag='bkup_vlnxora1_arch';
delete noprompt archivelog all backed up 1 times to device type disk;
run {
delete noprompt obsolete;
crosscheck archivelog all;
delete noprompt expired archivelog all; -
I have moved my library to an external hard drive and changed the location of the iTunes media folder in Preferences, but every time I close and re-open iTunes, I have to do it all over again. How can I make the iTunes media folder change permanent? I have an older machine with Windows XP.
I don't believe mounting the hard drive should be necessary, unless you have several external drives and want your computer to recognise them as folders, rather than drives. I've never had to mount a hard drive, ever. If you don't know how to do it, then it shouldn't be necessary now.
Try this:
Prepare iTunes so that it can see the external drive.
Make a note of which drive-letter the external drive has been allocated. (Look in Windows Exploer)
Look at the file location for a song. Make sure it plays (and therefore that iTunes has found it). Highlight it and select File/Get Info/Summary>Where: and make a note of the drive letter for that song.
Close and shut down the computer.
The next time you turn the computer on again, connect the external drive
Before you start iTunes - check the external drive in Windows Explorer. Is it ready, does it have the same drive-letter that it had last time? Can you go into the drive and see the files on it?
Once you can, start iTunes. (If the drive lettter has changed, you need to work out why before going any further.)
If iTunes fails to find your external drive, you need to check where iTunes is looking for your Library.
Select the same song you checked before (presumably iTunes can no longer find it). Follow the procedure for locating it. You should be able to see where iTunes thinks the file is. It's the drive that counts. Which drive letter is iTunes looking at? Is it the same one that it was previously (which should also be the same one that the drive has now).
What happens, which step do you have problems with?
Message was edited by: the fiend -
How do I stop GoLive from changing the location of my CSScriptLib.js file?
How do I stop GoLive from changing the location of my CSScriptLib.js file?
I am making rollovers and want my CSScriptLib.js to be in the same folder as my HTML files.
Every time I edit the rollovers GoLIve recreates the path of the CSScriptLib.js to file:///Users/xxx/Library/Preferences/Adobe/GoLive/Settings8/JScripts/GlobalScripts/CSScr iptLib.js so it won't work when uploaded. I always need to edit my HTML before uploading. All I want it to say is src="CSScriptLib.js" as the default.The site file is a database that keeps track of all your assets (and much more), including the scriptLib file. As soon as the page is saved (when you use the site file and it's open) the link will be change to the correct path that will work on the server.
If you're not using the site file you might as well use a text editor, since most of GL functionality is gone. -
How do I change the location of the coldfusion-out.log and coldfusion-error.log files in CF10
When I change the log location in ColdFusion Administrator it changes the location of most but not all the log files. I have a requirement from my customer to place all log files on a separate partition on the server. For ColdFusion 9 I was able to modify the registry settings to change StandardOut and StandardErr for the ColdFusion Jrun service. This does not appear to the case for ColdFusion 10 which now uses Tomcat 7.
I tried modifying log4j.properties file and was able to relocate the hibernatesql.log, axis2.log, and esapiconfig.log but not the coldfusion-out.log.
I am running ColdFusion 10 Enterprise Edition on a 64-bit Windows 2008 Server.The location of the rest of the ColdFusion logs can be changed in the ColdFusion Administrator. Go to the Debugging and Logging section, Logging Settings. There is a form at the top of the page where you can change the log storage location.
-Carl V. -
how do i stop my itunes from changing the location of my itunes media. i have it saved on a external HD and it keeps changing back to my local drive with out being told
No, an external drive will not always be mounted. If the drive goes to sleep, it can unmount, or it may unmount for other reasons. As Chris said, confim that the drive is mounted and active before launching iTunes.
Regards. -
How can we change the input field on a view stop showing zeros
Hello,
To make screen look consistent with other character input field. How can we change the input field on the view stop displaying zeros even though the data type is NUMC and data type should not be change?
Edited by: sap_learner on Mar 25, 2010 5:44 PM
Edited by: sap_learner on Mar 25, 2010 5:49 PM
Edited by: sap_learner on Mar 25, 2010 5:55 PMhello Manas Dua,
Thanks for your help. I am able to resolve my problem.
My code will help the future comers to resolve this kind of issues.
*The code is applied to method WDDOINIT of the default view.
DATA lo_nd_terms_input TYPE REF TO if_wd_context_node.
DATA lo_nd_terms_input_i TYPE REF TO if_wd_context_node_info.
DATA lv_zeros TYPE wdy_attribute_format_prop.
lv_zeros-null_as_blank = 'X'.
lo_nd_terms_input = wd_context->get_child_node( name = wd_this->wdctx_input ).
lo_nd_terms_input_i = lo_nd_terms_input->get_node_info( ).
lo_nd_terms_input_i->set_attribute_format_props(
EXPORTING
name = `ENTER THE ATTRIBUTE NAME`
format_properties = lv_zeros ).
Edited by: sap_learner on Mar 26, 2010 5:02 PM -
Changing the location to which iphoto & albums are stored/saved
how do I change the location to which iphoto stores photos and albums including all events rather than my computers hard drive without loosing any information?
thanksMake sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Regards
TD
Maybe you are looking for
-
How do I delete an email address that cannot be found in my contacts app
An unknown email address always pops up when I try to select a recipient That email address cannot be found anywhere in the contacts app when I try to get it deleted. It is an invalid address, as when I sent out a testing email, it was bounced as de
-
The bug can be seen when a calendar is introduced from CalDav. The calendar is then linked to a group. If a .ics calendar is imported, the group is proposed as a possibility for importation and if chosen then iCal enters in an infinite loop
-
Hi, I'm using the sap.ca.ui.ExpansibleFeedListItem control in a list. When the type is "Navigation", a small arrow should be displayed at the right side of the list item. That works fine, except on a iOS device or in the safari browser. Is this norma
-
FI user is unable to track these payments made against the PO unless he maintains a manual reference
Dear Experts, I have a requirement as below - Usually when a Purchase Officer makes a Downpayment request in F-47, and the Finance user posts the downpayment using F-48, the transaction is visible in the PO History. But if the payment is not a down-p
-
Some email functions on aol not responding.
Why, when I hit the reply button on an email, does the address of the sender (of the original email) not appear in the "To" box? I can't type into the message box, nor can I attach anything. I have had to return to Safari for emailing. I use aol on a