Project list shows removed projects in BI (P6 report)

Hi,
I developed a query in BI to show the list of the project under an specific EPS in P6, it works but it also shows the list of the projects which were exist there from 3 months ago but already removed from the EPS node. i.e I have only one project in P6 under that EPS node but in Bi report it shows previous updates from 3 months ago.
Appreciate if anyone can explain why this is happening and how can I refine it.
Regards,
Manochehr

Hi,
Check the publication services are turned on in P6 Web . Logic into P6 web as admin user , go to administrator and select services. Check the publication services is enabled and also enable the types of global data to be scheduled in Global Scheduled Services.
Thanks
Govind

Similar Messages

Mac project file showing "Invalid Project" on PC

Got an Encore CS5 file created on a Mac that I'm trying to open on my PC so that we can burn BluRays... I try to open it, and get an error message saying "invalid project file." Any suggestions?

Thanks, Stan...
I never could get the project file to open, so I tried importing the media
files (exported as bluray files from PrPro on the mac) into Encore to begin
fresh, and it always killed Encore. I then tried importing them to PrPro to
see if I could DL to Encore, and it killed PrPro as well. So finally I ran
them through G-Spot and found that one of the two m4v files was in AVC/h.264
and the other had no associable codecs. The one without associable codecs
simply wouldn't open, and the one in AVC/h.264 would go half-way and then
kill the programs. Neither would play in any media player, including VLC.
So I've got the guy who created the files going back to his PrPro project on
the Mac and he's supposed to try and render them out in Avid DNxHD (which
I've been told is a good cross-platform codec) and if he can't get that to
work (the Mac's he's on are under IT lockdown and he may not be able to
install the Avid codec pack) then to render them out as 8-bit uncompressed
QuickTime. Either set of files, I can pull into PrPro and then do DL to
Encore and rebuild the menu system using the PSD files he sent me.

.obj option status - show in project list?

In previous versions of CVI, the project list shows whether an object is compiled to .obj, or not. I can't find how to show this in the newest CVI.

Thanks for the reply.
I read all that stuff and it flys over my head. I just don't get why somewhere there can't be a list that keeps track and you give me a little red dot in the list. I have a project with about 60+ files, so this is very annoying on something that used to not only not be not annoying, but was usable and useful.
I guess this is related to the fact that if I have one program in debug, the rest in .obj (of course, I'm not quite sure, since there's no indication) - I change one line of code, tell it to build, and the entire project builds. In the previous version, only that file recompiles. That was nice. If this is the way it has to be, it's a bit of an annoyance when you're building 50 times a day.

Creating Projects via Project Mangement Module vs Project Costing Module

Hi,
Is it true that I have to use Project Management(Project Super User responsibility) to create projects in order to fully utilize Project Management Module(Project Super User responsibility)?
I noticed that if I create a project via Project Costing Super User(Form based), I cannot access functions such as Project, Resoruces, Workplan, Financial tabs,etc. when quirying the project via Project Management Module(Project Super User responsibility)
Does it matter which responsibility/module you use to create projects?
Please advise.
Thanks,
Joon

Hi Dina
Thanks for your answer. This is a situation that I have. We'be been using Project Costing for years and we mihgt start to enter a lot of budget data. The budget data are huge so we're looking at WebADI solution. I noticed that in order to use WebADI I have to configure Project Mangement and use Edit In Excel function which is from Project List page in Project Mangement module. (Cannot use WebADI as standalone)
1. Is my understanding about WebADI correct? I have to start WebADI from project management module, not from Excel.
2. Do you remember the program names that convert/upgrade to project management version of projects? Is the program simple to run and stable/
Thanks,
Joon

IMovie crashed now .rcproject file doesn't show in library/project list and won't open.

URGENT PROJECT DUE TODAY.
iMovie crashed while I was working on a project, now I can't c the file in iMovie, however I can see it in Finder and moved to the movie folder, but it still doesn't show in my iMovie library or project list and nothing will open it. It is listed as a .rcproject and I cannot find how to open it. PLZ PLZ HELP

Were you working with iMovie 9 or 10 when you had the crash?
It sounds like you were in iMovie 10 trying to update your iMovie 9 projects into iMovie 10.
If you were working in iMovie 10, see if you can still see everything with iMovie 9.0.9 (the 2 versions have completely different media file structures).
If you were in iMovie 9 it sounds as if the .rcproject package may have got corrupted. You can look inside the package in Finder with the "show package contants" contextual menu but I would not know how to repair it manually.
Do you have a backup or are you running time machine? With a backup you should be able to replace the offending package with a working version.

"Show in Project in New Tab"?? or alternative? "Viewing History" list??

Hi. The biggest rock in my Aperture workflow is not being able to instantly return to a view I had been recently using. I often work in a Smart Album, need to go to the Project in which a Version resides, and then return to the Smart Album. I sometimes simply need to refer to a photo elsewhere in my Library, then return to where I was. Is there an easy way to do this?
Other programs provide a drop-down history list from which one can select previous views. This would be most useful. Aperture's tabbed views could be quite useful for this kind of "editing in one place, then another, then back", if there were some way of opening a new tab based on the current selected images, e.g.: "Show in Project in New Tab" or "Create New Album containing current selected photos in New Tab".
I would love to know any work-arounds anyone has found usable.
Thanks.

At its simplest, what I want to do is right-click an image and open the Project that contains it in another tab. This can't be done (afaict). In practice, it's even harder: you cannot open the same container in two different tabs (which would allow me to then right-click in one of the tabs, and later return to the first tab).
Separate but related: the absence of a viewing history (MRU list) confounds me hourly.

How can I get more than 5 items in my Recent Projects list?

After a rather horrendous incident with trying to do a series of videos all in one project using bins and shared media and a savefile that got *WAYYY* out of hand (20 minutes to load the file)- which I believe was tied to importing media from another .proj file, I have switched to a more modular approach with anywhere from 2-5 projects in each project and now a collection of around 15-25 projects on the go. Most of these are "work on a chapter, then change to another project while waiting for footage for another project" and several of them share pieces including multicam segments and sync'd audio.
Rather than importing from another project, I am using Control-C, switch to a different project file, then paste in. This isn't the most "Adobe Professional" style way of doing things, but considering that I lost several hours to trying to recover from the last project, even when I only needed to spend 20 minutes pumping out a rough cut, I'm not going back to that method until my next computer upgrade and until I begrudgingly switch to CC in around 1-1.5 year's time.
So the issue that I'm faced with is that I'm often using the Open Recent Project flyout and having 5 projects on that list is just not enough to be remotely useful.
In MS Office, the list is quite long and even in photoshop, I can get 10. That's enough for my Photoshop, but I switch projects using the Recent Projects list in Premiere a LOT more often. I could just use my explorer windows to jump around, but given that I have 5-6 explorer windows open per project most of which are folders crammed with footage, PSD stills and peak files, plus other non-video things I'm working on right now, that's really not the simplest way to navigate at a glance.
How can I get 10, 20 or 25 items in that flyout list instead of mucking about with 5?
I run Adobe Production Premium CS6.

I see a lot of people not reading the circumstances of what I said.
I did mention that currently I use the "explorer" method and it's kind of clumsy. Although I liked the idea of using shortcuts. I had thought about moving the files, but didn't think about shortcuts... considering everything on my desktop is a shortcut, I'm really not sure why I didn't think of that.
But I did mention that I almost always have anywhere from 12-15 windows open at any given time in my explorer. I am involved with management of 4 different companies right now, two of which are in startup mode. Videos are important for me, but not my only duty. These windows only go down when I shut down my computer, which happens on average once every 4 months. It is not a problem on a reasonably capable system.
Still, for a project of currently 23 files (just got increased to 28 and expected to rise to 32-35), and because I have had project files go sour on me, I keep some hierarchy and because I don't have 100% creative control over all my projects, I also occasionally have to do re-overs ie when a specific style of writ is nixed by a boss or customer. Those 23 project files also have version iterations.
So navigating 'at a glance' through a file explorer isn't always the most practical.
In the end, I'll probably try to find some time to re-organize my file structure using shortcuts.
Still, given the number of 'recent files' can be modified or is larger than 5 in: Windows Start Menu, Recent documents, Adobe PDF recent documents, Adobe Photoshop, All Office suite programs...
It's just weird that there's only 5 for a program intended for the kind of people that work on projects somewhat larger in scope than "hey, we took the dog to the park the other day".
@Jerry Klaimon - not sure what version of Premiere you're using, I'm using CS6 with Production Premium CS6. Recent files only shows 5. Photoshop shows 9. For my current workload, I'd probably want 10-12 and it would be nice if they could go to 20 or more IMHO. Look at History states. History states default to 20. I usually set this to 35 whenever I set up any user's computer. It's easy to choose what suits me from the preferences menu. I don't see why they wouldn't have the same idea for 'recent files'
@anyone who thinks I'm stupid - please feel free to insult me. A forum scuffle is often a great way to get the attention of moderators who might be in a position to pass this idea on to someone who could do something about it. I'm also anal, stubborn, holier-than-thou and not-as-smart-as-i-think-i-am if you want some ideas to get started .
@Steven Gotz - you are quite correct that asking is important. Probably a smarter thing to do before pestering the devs with feature requests is to thoroughly check to see if it is in fact already existing. Adobe products are famous for having features that nobody knows about. Most of the questions I have that Google or Lynda.com didn't answer have been answered here in the forums. Then once I've seen that a few hundred pairs of eyes sharper than mine have also come up with nothing, then perhaps it might be worthwhile sending in a feature request. In this case, I will probably toss a feature request in later, but I'll probably just use your idea of keeping a master project folder with shortcuts.
@MarkMapes - I do not have a problem loading files. Project files load just fine for me. But I have one project file that has a problem that loads a HUGE amount of RAM and takes nearly 20 minutes to open. It even takes almost 8 minutes to close it. It was acting as my master file with everything nested in sequences and I needed to spend a whole afternoon to pull those sequences out using copy-paste because bringing them in via Import Sequence brought the problem into the new file. I would file that under "glitched save files" rather than "slow loading".
@Jon-M-Spear - good idea too - although I did cringe a bit at the suggestion of putting things on the desktop. I have bad habits and I work very hard to try to make other people who have worse habits in this company to try to get them to not keep anything on the desktop. In fact, it's probably my favorite thing about Windows 7 that you can have a clear or nearly totally clear desktop.
Thanks for your comments folks.

Change Request Management "There is no task list for this project"

Hello!
I would like to use the functionality of CharM in SOLMAN 4.0.
When I enter the Tcode /n/tmwflow/proj I receive the waring/error "There is no task list for this project" (/TMWFLOW/TRACK_N114)
If I create my own task list via Task list --> create
I get the warning "You cannot change task lists in the SAP namespace"
What are the steps to define task list for my project?
Do I need to configure SPRO ... --> Extended Configuration --> Schedule Manager?
The second warning I get: "NO CTS projects created yet" or
"The Solution Manager project does not have an active CTS project yet".
How can these warnings/errors be corrected?
Thank you very much!
regards

Hi,
Pls click the check button(next to activate button)
see the SLG1 log generated remove the errors shown in red.
One it is done u press the refresh button & thn u cn create the task list
chk
https://websmp202.sap-ag.de/~sapdownload/011000358700000657692007E/ECTS_CHARM_SP12.PDF
/people/dolores.correa/blog/2008/07/26/first-steps-to-work-with-change-request-management-scenario
http://help.sap.com/saphelp_sm32/helpdata/en/0c/5b2160f6fa4b83a3674a210b1cdeb0/content.htm
Regards
Prakhar

This pops up when exporting in iMovie "Unable to prepare project for publishing: The project could not be prepared for publishing because an error occurred. (ParamErr: error in user parameter list)" I have turned off my Time Machine in terminal.

This pops up when exporting in iMovie "Unable to prepare project for publishing: The project could not be prepared for publishing because an error occurred. (ParamErr: error in user parameter list)" I have turned off my Time Machine in terminal yet it remains. What do I do, I need your help PLEASE.

Hi
Error -50 paramErr Error in user parameter list
Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
What this means in Your situation is above me.
• free space on internal boot hard disk? How much ?
Video codec
• streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
Pictures
• in what format ? .jpg, .bmp, .tif, else ?
Audio
• from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
The "com.apple.iMovie.plist" file
Many users has not observed that there are TWO libraries.
• Library - at root level
• Library - in user/account folder - THIS IS THE ONE to look into
from Luke Burns
I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
I don't know why that could cause that big of a problem, but it did..
Klaus1
You need more free space on your hard drive.
jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
Where do Your material come from
• Camera
• External hard disk
• USB-memory
And all are connected so that iMovie can find it ?
Yours Bengt W

A rebuild removed projects from photos and put empty projects in the trash.

I'm running Aperature 3.2.4 in OS 10.6.8 (Snow Leopard) on a MacBook Pro 1,1
I have a large library of 37,000 images on an external hard drive. I have experienced a number of problems which culminated in a corrupted drive and library which I have taken several steps to repair. In an attempt to be thorough, I may be including more info than necessary, but here is my tale.
1) There have been inconsistencies for some time when deleting photos in the camera (compact flash card uploaded through camera) when importing photos. Occurring more frequently, the photos did not get deleted when I made that selection, most normally with the unmount camera box check. This is a big deal, I adapted by checking the camera when it was unmounted.
2) I hadn't been emptying the trash in Aperture and accumulated several hundred photos in the trash. Blame it on procrastination and no appearance of pressing necessity.
3) My camera has developed some problems with the USB port, perhaps getting worn with a lot of use. When importing photos, the camera has recently started disconnecting during the import of photos..
4) This has resulted in a corrupted drive directory, which I was able to repair with Disk Warrior. It also resulted in photos that were not in the Aperture library. Aperture was no longer able to see those unimproved photos, no matter what drive I was able to copy them to. I resolved the import problem by changing the file name slightly. I assume that Aperture registers filenames before importing, and if the import fails, Aperture is unable to see that the import failed. I have added those files by changing the file names, and my long term solution was to get a CF card reader.
5) I thought that my problems were solved, but when I opened Aperture today, I got a dialog box telling me that I need to repair permissions, then another about rebuilding the library, and a whole series of failed attempts to do so with a string of boxes suggesting that I quit, rebuild, or repair, all attempts eventually hanging. Disk Warrior tells me that several plists mostly involving changes could not be repaired. After several attempts and restarts, I was able to open the library in Aperture.
6) The left window was missing a large number of projects, but in photo view, all of the photos and versions were there with the meta data showing a path to the original projects. In the project view, all of the projects were there, but I could not open any by clicking on them. When I viewed the trash contents, there were a lot of empty projects. It was probably a mistake, but I emptied the trash.
7) I have not closed Aperture for fear that might result in changing those paths attached to photos. Hopefully they are the key to setting things straight.
Is there any way I can undue the trash dump, or otherwise return photos to the appropriate projects? I'm talking about nearly 400 projects, so this is not a minor glitch.

I quit Aperture, which hung up while writing preveiws, so I did a force quit. I restarted Aperture while holding down command and option keys, but Aperture opened directly into library with all projects and photos intact. Oddly enough the projects seem to be in a random order, certainly a different order.
I closed Aperture without a problem
I ran Disk Warrior again, and once again there are damaged property lists that cannot be repaired. There are 9 plists numbered from
File: "0000000002.plist"
thru
File: "0000000012.plist"
all in
Aperture Library.aplibrary/Database/History/Changes/
I opened Aperture again while holding down command and option keys, this time getting the dialog I wanted, and I'm now running Repair Library Database.
Well the dang thing seems to be hung at "Repairing Library 100% complete"
I'll give it a while, Force Quit and try again.
Any suggestions? Should I try a rebuild on the next try?

MobileMe Album in Project List

I used to have my MobileMe album show up in my Project List when I opened Aperture, but not anymore. I can't find what I did wrong to have it dissapear. Need help configuring it back.

This has just happened to me as well. MobileMe doesn't appear as a group header at all. It appears to have done it to me after I briefly switched my MobileMe synch settings in Aperture to manual due to network issues badly impacting Aperture performance. As a result, it has lost all of my MobileMe albums, even though I have switched the synch period back onto automatic.
Graham.

R12 Project List view - At Completion columns

Hi,
The project list in Projects R12 can be personalized to allow displaying ofmany different columns, most ITD and PTD.
I wish to show 'At Completion' values for various reasons, the main one being so I can at the 'At completion' cost budget (current total budget).
But also the revenue budgets, forecasts and the variance 'At Completion'.
Is it possible to show 'At Completion' values in the project list? It seems odd that these columns are not available by default....
Thank you in advance for any answers!
Matt

Hi Govind,
Thank you for your reply...
The 'At Completion' column is not available in Personalization list of Values for available columns - only ITD and PTD.
Is there a way to add columns that are not available in personalization list?
Matt

Replicate SharePoint list to Project list automatically?

I am trying to find ideas/thoughts that will achieve all the following 6 requirements below.
We need to start a series of tasks when a new request form is submitted.
1. The tasks needs to be auto created.
2. The tasks due dates and start dates needs to be auto populated based on certain fields in the input form. The assignment of the task should automatically happen based on the input form.
3. When the task gets assigned or overdue, we need emails to go out.
4. We need to do reporting on the task list and show dependencies.
5. If the dates changes in the input form, we need to slide the dates of all the task.
6. This all needs to happen Online. We do not want to maintain the servers.
Questions:
We are able to do 1,2,3 very well in SharePoint online task list. The problem is in intems #4 and #5.
Reporting and moving the dates of all the task when the project dates slide.
Is there a way have the sharepoint task list replicated to Project Online periodically?
Or can we do items 1,2,3 in Project Server Online?
Would appreciate any pointers.
Thanks
Faye

Shazeb,
Your suggestion is exactly what I am doing right now in code as a workaround. I delete the entire Project Plan using PSI call and queue a new sync.
However, as you can understand, this is clearly a less than desirable solution as any Project specific information would be deleted as well.
I noted the same behavior as you that when an item is deleted, it is not possible to get the sync to work thereafter, even if I add a new task with the same name. My guess is that the underlying sync logic uses the ID of the task in the list so sync
to a task in Project so when the item is deleted in SP, this error occurs at the low level LINQ code.
Seems like a product defect -- would it be possible to get this fixed in a future CU?
thinktastic.com |
charliedigital.com | linkedin.com/in/charlescchen

Error occurs when I open the tasks list in MS Project Professional 2013 from SharePoint 2013

Hi,
I have created a SharePoint 2010 workflow for a tasks list that updates a list item column if the Date Complete <= Today's date & Percentage Complete = 100%
I used 'Set Field in Current Item' in the workflow & the values are updated in the list for the current item.
However, when I open the tasks list in MS Project Professional 2013 from SharePoint 2013, then I get a error "We can't write task - taskname to the SharePoint site. This is either because tasks list is in read only mode or because this task has a column
that requires unique value."
If I remove the 'Set Field in Current Item' in the workflow, then the error does not occur. However, the 'Set Field in Current Item' in the workflow is required.
Please provide solution to this issue ASAP. Your reply will be greatly appreciated.
Thanks in advance

Hi Jack,
A shot in the dark here. I'm not convinced the error is from the workflow. What is the definition of the list item column in SharePoint? Have you set the column to requiring a unique vale? Look at the column definition.

Planning project not showing in shared services and planning app wizard

I installed planning ver 9.3.1 and now when want to create a planning application, the 'planning' option is not showing in app wizard. It is also not showing in shared services project list. Can you please guide...
Thanks & Regards.

Thanks for the reply. I can login to planning AppWizard but when want to create a planning application, in the drop down of shared services project, the 'planning' option is not coming.
As I have installed planning afresh, so right now no planning application I have in my computer. so, no meaning to login to http://localhost:8300/HyperionPlanning/ because it is showing 'no application'.
Please revert back for any clarifications.
Thanks & Regards.

Project list shows removed projects in BI (P6 report)

Similar Messages

Maybe you are looking for