Project System Problem

Hi PS Gurus,
I am handling Make-to-Order Customer Project Scenerio.
When I create a Sales Order, automatically the Project should be created.
I have defined std WBS, std networks, and created a Configurable Material and matained all the assignments.
And ofcourse the Mile stone are matained in the std networks.
I do not known where I am going wrong.
Can any body give a checklist to check all the relevant issues to be done in the Make-to-order scenerio.
Can any body give the workflow of Make-to- order scenerio.
Thanks in advance
Venu

Thanks for reply i get the following error message when i save my activity i.e.
Item 001 Ntwk actvty 903719 0010 budget exceededudgets
i check my budget from cj30, cj32 of that wbs element it seem ok
budgets no budget execeeded but when i confirm my network activity i
gives the budget exceeded message.
please also tell me what is impact of my confirm amount in my actual
cost.
thanks
>

Similar Messages

Display to projection system problem

On several projection systems at school I hook up my MacBook with a VGA connection and it works fine. However, there are other projectors that give me difficulty. The display on the computer changes and both the monitor and the projector displays the information much larger than usual and I have to continually scroll back and forth to show the information. I have tried the F7 key. Is there something I might need to adjust before I make the connection to the projection?
Can anyone help me?

I would suggest checking the display settings in System Preferences when this happens. You should be able to adjust the settings there.

PS (project system ) problem

does anybody have idea why PR creation (upon saving PR) from CJ20N does not trigger PR's user exit..coz we found out that PR created from PS does not trigger PR workflow ..

Issue unanswered

Buget Exceed problem regarding material transfer in project system

Hello Sir,
I have a problem regarding budget in project system.
when i do budget and release . and do any transaction
with that budgeted wbs element in particular project.
i get budget excced errors usally.
however, budget remains more than exceeded buget.
Let us touch with a example in brief, we have a buget for a L&T project 10 Lakh.
Buget Release actual cost total cost commitment
10Lakh 10Lakh 8lakh 1Lakh
when i transfer a material from another project to this L&T project material worth is 50thousands.
i get a errors for L&T project budget exceed with 40thousands.
however in project budget remains 1Lakh remaining .
why system shows errors for this material transfer worth rs 50thousands
Please help me regarding this problem where is 1lakh budget
with regards
sanjay agrawal

Hello sir,
there is no any problem regarding budget supplement but if project sometimes
remains 20lakh buget price remaining out of 50lakh.
and need 1 lakh material price for transfer in project
then why need to do budget supplement for 1 lakh if project
remains 20lakh price rest.
please guide me for above problems
with regards
sanjay agrawal

Capacity check problem in Project system

hi,
i have some questions for the Capacity check problems in Project System.
1. if one Person is assigned to diffierent Work Centers, for example, person A is assigned to Work Center 01 under Plant 01, and Work Center 02 under Plant 02, how can i do the Capacity check?
if i want to use A of Work Center 01 in the Project, the System will only check the Capacity of 01, or both of 01 and 02?
2. What is the Pooled Capacity?
Rgds,
Liang

hi,
1.Capacity check takes place at plant level itself..
2.Pooled capacity:- This is created separately in [u wil find in PP] and this capacity can be used by different work centers.
regards
pushpa

Problem regarding SAP Project System & Material Management

Hello Experts,
please check our process as below:
Order confirms than sales order and project will create
material of BOM is assigned to any activity in project so these material (RM) will be procured and consumed
assign activity for all work done on material to produce FG or SFG.
confirm activity whenever any work done like fabrication done so confirm and its cost comes to WBS.
than we have to subcontracting process so dispach SFG from this and receive after activity done by third party.
than more work is done and confirm these activity. than after all work done we get FG in stock. than delivery from project.
We are facing issue in above business process of our client as below:
1. process of subcontracting using project system as we are not using production planning. how we get any SFG for subcontracting process.
2. if we confirm all activities and consume all Raw Materials than how we will get finished good in our project stock for delivery.
3. after delivery from project how sales order affects with regards to completeness of this sales document.
Please help for this.
Note: Remember we are not using PP cos customer require detailed report of these process and capacity planning etc.
Thanks
Sunil

Hi Sunil,
Assume this is my project structure & attached components. I will procure this components externally. After GRN, This components will be issued to network with 581 Q movement type.
Now we need to assemble this raw material to produce our FG, As these SFG are in our project stock. What we need to do for assembly process through PS.
Also throw some light over benefit of using PS-BOM interface ( CN33 ) for attaching material components.
Project
WBS
Network
Activity A
Gears
Qty - 1
Activity B
Blades
Qty - 2
Activity C
Stand
Qty - 1
Activity D
Connectors
Qty - 1
Regards
Gaurav Ahuja

Problem with Project Systems authorizations

Hi All,
We are implementing project systems module and are facing several authorization issues. The SAP default values do not seem to work and there are several objects which showup as "not checked" in SU24 showup in the SU53. e.g. tcodes are CJ20n, CJI3. Are there any steps for activation / pre-requisites, etc?
Thanks for your inputs
Vijaya

Hi
There are chances that some of the transactions codes will call other tcodes while execution.
in this case also CJ20N is calling many tcodes, those auth check would not be inserted as check points in SU24 , hence you should identify them in the testing phase or using the TCDCOUPLES table.
You can check the calling & called transaction values in the table TCDCOUPLES in SE16, according to that you can build your SAP roles.

WBS Elements not getting created in ECC Project System from CRM 7.0

Dear all,
We are trying to integrate SAP CRM 7.0 with SAP ECC-PS module. The objective is to bring in the marketing plan and elements data from the CRM system, and to create the corresponding WBS in project system. We have done most of the configuration as recommended by SAP in both the systems, and we see that the BDOCS are getting generated and sent to the ECC system. The following steps have been successfully completed:
1.       Set up the RFC connections between the two systems
2.       Selected the connection type as Middleware in CRM system.
3.       Installed the cProject Add on in CRM box.
4.       Created a project scenario (with project and network profiles) in the PS system and assigned the same in the CRM system.
5.       The Project Scenario in PS config has the same name as the Project Type in CRM config.
6.       Created and released the campaign ids being created in the CRM system.
As already mentioned, we can see that the BDOCS are coming to the ECC system and are getting stored in BDOC_TRACK table. However the issue is that the corresponding WBS elements are not getting generated in the ECC system. Is there anything that that we are missing in the ECC box which would trigger the WBS element creation?
Request you all to share your inputs which would be immensely beneficial for us in achieving this integration.
Thanks and Kind Regards,
Aditya Shrivastava

Hello Aditya,
We too are facing this issue.. if you have resolved the issue could you please let us know the solution ?
Some inputs related to our system,
We have upgrade from CRM 4.0 to CRM 7.0 SP07 and R/3 backend system is on 4.7 SP27, earlier we have completed the upgrade on sandbox without any issues which was upgrade to CRM 7.0 SP04 but with SP07 we are facing the problem of WBS Element not getting created in R/3.
Your help is highly appreciated.
Thanks & Regards,
Sumukh Kapoor.

Project System - Report Painter - Cost roll up issue

Hi,
We have an issue with the roll up of the costs in Report Painter report in Project Systems. The problem occurs only with those costs which have been settled to an internal order from a WBS element.
We are using the same cost elements to settle to the Cost Center and Internal order and roll up of the costs work fine for those settled to cost center. But the roll up does not happen for the costs settled to an internal order. Would appreciate if someone can guide on how to fix this issue.
Raj.

Here are the values:
Period/year     000.1900     Remainder 1900     PERIO     Period/year
Value Type     4     Actual
Value Type     10     Statistical Plan
Object ind.     P     Project item
Object ind.     1     Order plan values: appended, apportioned     9     Order values: not appended, deleted
Debit type     1     Costs and credit-side payments
Thanks for your help.
Raj/

Asset settlement issue from Project System

Hello everyone,
In SAP, we have tied Project System and Fixed Asset in the sense that for each network/activity in PS we create and link an asset in Asset Accounting. In the Purchase Order, the network/activity number is assigned and all the transactions that occur through this PO (including down payment, its clearing, GR/IR) are then settled on the specified asset when we execute settlement run at month end through CJ88.
However, we have encountered scenarios where an asset was not timely allocated to the network/activity but the transactions were carried out through the PO. When the settlement run was executed, its impact was not visible in Asset Accounting. Later, it was realized and the asset was created and assigned. Once the asset was assigned, all the subsequent transactions through the PO were then being settled successfully. But the problem is with those transactions for which the asset number was initially not assigned.
Is there any program that can be executed to include the impact of the previous transactions. Otherwise, suggest alternatives.
Thanks

Hi Thanks for your reply, But that is not relevent to this issue.
The issue here is -
First 2 documents has value date of 4th period and the amount is 8800
Next document has value date of 5th period and the amount is 1200
Now i am trying to settle 10000(8800+1200) with 5th period date. Its givign an error Settlement amount is greater than Available amount
Will it solve if i settle 4th period with 8800 first and then 1200 with 5t period? or any other process?
Thanks
Yadayya

Project System Cash Management in combination with statistical WBS element

Hi,
within a customer project, we have to solve the following issue:
Customer runs projects and statistical projects in combination with internal orders.
We want to use the PS Cash Management for planned and actual payments.
With statistical projects we have the following problem:
Invoice and actual payments will be processed with the transaction CJFN.
Actual payments are shown only on the internal order (transaction CJIA), but not on the statistical WBS element.
We want the information about the actual payments with in the project system reporting (S_ALR_87013574).
Projects, not flagged as statistical will deliver the expected results.
Many thanks for your ideas, to solve this problem.
Steffen

are u posting to some other cost object also. normally they wud have to be posted to a COPA also with the cost element being 11 category.
the wbs will receive the statistical posting, so there needs to be a real object also.
see whether the real object is getting derived.
the system is nt finding the real object and trying to post with the WBS in real, but since its statistical, the error.
any other calrifications. plz post.
regards
anantha

Customer Downpayment Update in Project Systems

Hi,
I am facing problems w.r.t. update of customer down payment update in project systems. As per standard SAP, after doing customer down payments, this will get updated in project info systems (CN41/CN41N).
Please suggest me to fix the issue.
Best Regards,
Ranjan

hi,
Downpayment request is used to create a billing request through
the t code DP 90.This DR can further be used to create a billing document
say invoice.
Actually you will be using these fundas in Resource Related Billing because that is
where the integration between PS and SD module take place with the help of
DR against actual resource utilized in the project.
I hope this clarifies your question and award points if it is so.
Do not hesitate to ask me if you have any further questions in this.
Thanking you,
Best Regards,
R.Srinivasan

Report-Report Interface from BW to Project Systems

I'd like to jump from BW reports based on 0PS_C04 into the corresponding R/3 line items. If I specify CJ74 as the transaction target then run the BW report and choose the corresponding option from the 'GoTo' menu the following message is displayed. I find this very confusing -- it seems to be saying that the report behind the transaction cannot be used in the report-report interface, but in the procedure says always use the program in the report-report interface.
Can anybody understand what the message is telling us? Can anyone tell me how to jump to an R/3 line item report from BW Project System cube?
Thanks
Robert Williams
You cannot use the report-report interface to call up report RKPEP000
Message no. HF 800
Diagnosis
Line item report RKPEP000 is not suitable for the report/report
      interface.
Procedure
Always enter RKPEP000 as the receiver report for project line items in
      the report/report interface. This program uses the transfer parameters
      to determine which line item reports can be accessed.

Hi
I dont know whether you have solved the problem or not yet
But i came up with the same issue....
Use interface program RKPBW000 instead of RKPEP000 in the RRI settings.
OSS Note : 356166
Thanks

Project Settlement @ Project Systems

Hi Experts
I am working on how to settle a Project in Project Systems. Could you please provide me guidelines how to do it.
I am also looking for the connection/relation between Project Systems and Result Analysis of Product Costing.
Thank you
regards,
S. Habib Pasha.

HI
The moment you say that the settlement to GL account, it is an external settlement i.e CO to FI ( WBS element being a cost object ) . In the allocation you need to have settlement element as an external settlement element with category "22" . When you are settling to a GL account and if it is a cost element then it will ask for a co object still as the system simultaneously needs to post to controlling as well. Yo make this setting for the GL account through automatic account assignment in transaction OKB9.
I this will solve your problem
Anand

Project system: Purchase requisition coming from PS

Dear Experts,
I have a tricky problem. I want to exclude a specific number range for purchase requisition coming from the Project system.
The current number range I have for the purchase requisition is let say: 10000000 - 19999999.
I want to use another number range (50000000-59999999) for the purchase requisitions as an impact of material components of an network activity.
What I've tried but it is not working properly:
1. TC: OMH7 - I created a new number range as I mentioned above
2. TC: OMEB - I've copied the document type NB to a new document type ZNB (NB = ZNB)
3. TC: OPTT - as last step I've assigned the document type ZNB to the order category 20 (network)
Please advice ASAP
Thanks a lot in advance

It should work as it works fine for me.
1. You create the Internal number range (50000000-59999999) first and number it with an ID.
2. Create the ZNB document type and assign the number range number (i.e., two-character ID)
3. Assign this ZNB in OPTT
If I've repeated what ever you've done/said, check the settings once again. It should work.
Regards
Sreenivas

Project System Problem

Similar Messages

Maybe you are looking for