Project Tuning Questions

I would like create a new project and set the tuning in the project to a tuning that I heard about recently that I would like to experiment with and try and create compositions using the frequencies. - I'm just a piddler and I am not trying to break any boundaries or anything like that, It is more a curiosity. - I read and article recently and saw a couple of youtube videos about something called "Sacred Geometry" and I would like to see if there is something to these claims. - Can anyone help me by instructing me in how I can go about setting the Project Tuning settings to these frequencies, so that my virtual instruments will play them? -
Here is what is said about these frequencies.- You can find a little information about this by searching 528Hz/Sacred Solfeggio online.- I don't know what much about the history of this stuff and cannot vouch for its validity. -
74 Hz 285 Hz 396 Hz 417 Hz 528 Hz 639 Hz 741 Hz 852 Hz 963 Hz
UT - 396 Hz -associated with releasing emotional patterns after: see RE-417Hz below.
RE - 417 Hz -associated with breaking up crystallized emotional patterns
MI - 528 Hz - relates to crown chakra; Dr. Puleo suggests an association with "DNA integrity" Transformation and Miracles
FA - 639 Hz - associated with whole brain quadrant interconnectedness. Connecting Relationships
SOL - 741 Hz - associated with intuitive states, non linear knowing. Awakening Intuition
LA - 852 Hz - associated with a pure love frequency: unconditional love and returning to Spiritual Order
P.S. I am not a religious nut or anything. - But the claims do intrigue me. Thank you

+"P.S. I am not a religious nut or anything. - But the claims do intrigue me. Thank you "+
— Whew! For a moment you had me worried. But scientific experimentation is never wrong. You can in fact tune your instruments to a scale which you can define — but you'll have to do a bit of maths. Ask again if you need help with that. Here's the gen:
p948, Chapter 40:
_Alternate Tuning Scales_
Activation of alternate tuning scales is achieved by clicking the appropriate radio button in the Software Instrument Scale section. The selected tuning scale is saved with the project when saved, and reloaded the next time the project is opened.
User
Each semitone can be detuned (moved away) from equal temperament in semitone steps. To do so, just click-drag—vertically—on each semitone box until the desired value is reached.
Alternately, you can double-click in each semitone box, and type in a value. Press Enter or click on another box to exit the text entry mode.

Similar Messages

Project Management Question - timelines for Production system deployment

Hi
I need an expert advice on setting up timelines for establishing an Oracle Apps Production environment. We are implementing Oracle HR & Payroll at an organization.
Our system architecture is a 2-node application tier and 2-node DB tier (RAC). RAC is configured by another party and we only have to prepare the application tier (2 nodes)
We would be installing Oracle Apps R11i (11.5.10) with jserv load balancing on the 2-nodes
Can anyone suggest how much time this should take to install/configure & patching of the application tier (on 2 nodes)?
Regards
Saira

Duplicate post (check your other thread):
Project Management Question - timelines for Production system deployment
Re: Project Management Question - timelines for Production system deployment

Project Billing Question

Hi All,
I have couple of Project billing questions. Hope you can help
1)A wrong customer was attached to project billing agreement, funding and base line also completed for the customer.
Now we realized that its wrong customer and want to change it to correct customer.
What are the options we have here?
Can we delete or end date the billing agreement?
will the funding be release from the wrong customner after deleting or end dating the billing agreement?
2) Wrong customer attached to a project..agreements,funding,baselining are NOT done.
How can we delete this customer and add the correct customer?
The option to change the customer is grayed out.
Appreciate if you can help.
Thanks

Hi
On your first question you said the agreement was created for wrong customer. Since you already baselined the funding, I assume you have that customer linked to the project.
You can go the Agreement form and enter a negative funding line allocated to the same project. The total allocated amount will be zero. The agreement is now not allocated and free to be allocated to another project. If it is a wrong agreement you may update the agreement amount to zero. Now create a new agreement for the right customer.
The open issue is with the project. You have a wrong customer associated with that project. However, system will not allow you to remove the customer - project record. Solution depends on the way the project was setup. Did you enable customer at top task? if so, end date the top task and create an alternative top task with the right customer.
If the project has been set with a single customer you better close the project and start a new one.
However, if you need an alternative solution, I can suggest a custom method. Go to Help > ..> Examine and change the existing customer of the project to zero contribution.
Now you will be able to add the right customer to the project and have 100% contribution on it.
Dina

C- project certification question and material

Hi Gurus,
I want to know is there any cretification for SAP C- Projects could you please let me if any one has SAP done c-project certification questions, or any relevant sites wherein I can get the same.
Thanks in advance for your help,
Thanks
Ashish

Hi Ashish,
cProjects being a part of the PLM package, you would need to undergo SAP PLM certification. As per my knowledge, there is no separate cProjects suite certification available.
However, there are training programs conducted by SAP for cProjects and xRPM. You may get the details regarding these from the marketplace. Please refer https://websmp101.sap-ag.de/partnerportal/apj/home
Let me know if this helps.
Regards,
Vivek Pandey

2 project settings questions

Hello again
Still experimenting with PrE8 trial version. This is my first experience with a video editor so learning all from scratch. I have a couple of questions regarding the project setting you need to chose when you create a new project. I understand these settings define the "working" enviroment for the editing process - in other words the resolution and all the other characteristics (format, frame rate, etc) that the project will use
1) I have a camera that´s 1920x1080 30p (progressive) , the GoPro HD. When I look in the new project presets, all 1920 x 1080 presets available seem to be specifically designed for interlaced video. This is indicated by the names of the presets, and by their descriptions as well. There is only 1 progressive preset, of a lower resolution (720p)
Nevertheless, I tried using the HD 1080i preset, loaded some 1920x1080 progressive mp4 files, and apparently it works perfectly well. In fact when I go to edit>project settings>general window, the project attributes indicate progressive video !!!
Is there really any difference (or specific requirement) in a project preset for interlaced vs progressive video? ( I am beginning to suspect that there is really no difference, and that the coding ( i vs p) does not really form part of the project settings, and that the project will take both forms of input media)
any thoughts on this?
2) The GoPro has a non-standard resolution mode, HD with 4:3 aspect ratio : 1280x960 30p
There is no project setting preset that will match this, how can I create one myself ?
The PrE help says this is possible, but I can't find how. ( Edit>project settings will not let me change the resolution)
from the help
If your source footage requires a custom project preset, you can create one. The procedure for creating a preset differs if you’re changing settings for an open project versus establishing settings for a new project. Presets you create can be applied to new projects, and if you want to back up or distribute preset files, you can find them in the Settings subfolder of the Adobe Premiere Elements folder on your hard disk.
http://help.adobe.com/en_US/PremiereElements/8.0/Win/Using/WS09e4b3c48f3a79fc19b622510385d 4355c-7fde.html
Again thanks so much for your time and your help , much appreciated.
Gonza

Unfortunately you will not be able to use the video from those "sports" camcorders directly in Premiere Elements. It's just not compatible with the program.
http://forums.adobe.com/thread/415317?tstart=0
As you can see from this FAQ, there are three options for converting the video:
1) Convert it a DV-AVI using MPEG Streamclip. It's a free program, but the DV-AVI it outputs will not be hi-def. It will be standard video, but it will be editable in Premiere Elements.
2) Convert it to a standard def DV-AVI using Quicktime Pro, a $29 download from Apple.com,and edit in Premiere Elements.
3) Use Quicktime Pro to do your editing. The video will remain a high-def MP4.
The best solution, of course, is if the camcorder itself comes with its own editing software. That's software you KNOW will work with the camcorder's footage.
But, short of that, you'll need to use one of the hybrid solutions above. But you will not be able to edit the footage directly in Premiere Elements. Sorry.

Limited navigation in projects with questions

I have a project with special instruction slides provided to support a number of question slides. The question slides and quiz preferences are set for one try and one retake. Students use the skin to navigate back and forth in the project and use the back and submit buttons to work in the questions. Students do not seem to have unlimited back and forth capabilities. Once they are in the retake version of the quiz, when they try to go back and get clarification on special instructions, they are blocked from going forward. Is my only option to separate my instruction slides and question slides into two projects?

Hi, Jon
Thanks for your help.
I will use an unconfigured LH file manager(I mean the file path and name will not be specified.).
Currently, find the temp file will be created in C:\Documents and Settings\$user_name\Local Settings\Temp in windows.
I have two questions on temp file.
1) Does tangosol supply a mechanism to maintain the temp files?
2) In solaris, which place will the temp file be created in?
Thanks,
Bin
null

Basic project management question

HI,
In the "Projects and Events" top level of the Libraries pane, there is a pre made "folder" called Projects. The icon is a purple square with a star. This is identical to all the others which I assume are Events. I I click on an "Event" all the clips are revealed in the pane to the right. But if I click on the tiny trinagle, nothing is revealed. I don't understand this.
Now my real question: If I click on the triangle for the pre made Projects fodler, it reveals 4 collections called: Complete, Incomplete etc. Also their icons look like a strange blue page. I made these and they seem to have come from the previous verions of FCP X. When I reveal the contents of Incomplete, what I want to do is move a project, by dragging, to the Complete collection. Instead of moving it though, it copies it. The only way to get rid of the project in the Incomplete collection is by moving it to the trash, but this really does delete it everywhere!
I find the new version very hard to understand. All I want is to group project according to their being complete or not, or some other catagory, but I canno figure it out.
Any help?
Cheers

Because the changes to the 10.1 library model were so substantial there has been a huge amount of info on updating and they way this model affects organization put out by Apple and many training organizations.
Here is a very good document by Apple; it gets right into the files created by updating. There are other docs by Apple as well as articles and free video tutorials by trainers easily found by a search.
The short answer is events live in libraries and projects live in events. Left to its own devices, the first time 10.1 is launched it will update the projects and events it sees on connected drives and make a library for each drive. The disclosure triangles reveal collections. If there are no collections, nothing will show when opened.
HTH.
Russ

PRE9 Project Settings questions

I just got PRE9 and I am working on my first video. The question I have is
about project settings and resolutions, etc. I want to output the video to both DVD and to a file that can be copied to a USB thumb drive and plugged into my l 55in HDTV for playback. it doesn't have to be HD video, but I do want it in 16:9 widescreen atleast.
Any suggestions?
Thanks.

The project setting needs to match your video source (i.e. what you are putting *IN* to PRE9). So what is the source of your clip and what settings did your camera use at the time of shooting? How did you get it into PRE9? Ideally can you run one of your video clips through the free GSpot tool and post the screen shot here.
Getting your video output to any output (widescreen or standard) is a feature of the Share tab in PRE9. To output it to two formats (DVD and data file for your USB thumb drive) is two separate Shares that will be found under Share> Disc and Share> Computer (or possibly Share> Mobile Phones and Cameras).
Give us a bit more detail about where and how you want to play that USB thumb drive version.
Cheers,
Neale
Insanity is hereditary, you get it from your children

Tuning question --- please help

Hi,
I am new to the tuning of sql statements .. I do have a question on that .. Whenever I do execute my sql in the TOAD, i do watch the explain plan .. In most of my explain plans, i do used to come across "full table scan" that too marked in red .. why does it happen ?? and what is the better solution for it, since my colleagues, used to say that full table scan shouldnt appear in the explain plan
Regards

Whenever I do execute
my sql in the TOAD, i do watch the explain plan .. In
most of my explain plans, i do used to come across
"full table scan" that too marked in red .. why does
it happen ?? Because apparently the people who sell TOAD mistakenly believe that a full table scan is always bad, and so highlight them, to confuse new users and propagate the myth further.
In sqlplus the full table scan is the same color as all other access paths, and rightly so.
If you learn sqlplus you will learn faster, and be more productive than if you rely on user interfaces that hide the workings of the database and display a lot of confusing and misleading information.
(See that time at the bottom left of the status bar? That shows you the time the query takes? Well no it doesn't)
and what is the better solution for it,
since my colleagues, used to say that full table scan
shouldnt appear in the explain plan Probably because they use TOAD too much and never learn anything.

Please Help!! Easy Application Tuning Question

Ok - this should be an easy one for seasoned vets (but not for a newbie like me)
I've been asked by the boss-man to "find and tune the SQL that's causing the slowdown . . . " I'm on Oracle 817 running Peoplesoft Application. I've located the main problems with the Application and have some solid ideas about how to improve the SQL. So - my question. How the heck do I get into the Peoplesoft (or any other Application for that matter) SQL code to change it. Everything I read says, " . . . and then you can go in and tune the SQL . . . " but never exaplins how exactly to 'get in'. I can't imaging there is a File-->Open-->SQL Code feature, it must be more complex than that. So what am I missing here and how do I get to the place where I can change the Application's SQL for tuning?!?!?!?
Thanks in advance for any help you give.

Peoplesoft owns the application code. So you can't change the application code. However, you can examine the code and see if there are some indices that you can create to improve the query. Also, you will need to rebuild your statistics. As a matter of maintenance, you should rebuild your indices and statistics on a regular schedule. Especially if your optimizer parameter is choose and you have high volatility.
Alternatively, you could ask Peoplesoft to provide you with a patch.
Maybe someone else has another idea?
LM

Tuning questions

Hi all,
i want to know abt some things in performance tuning since i m just a beginner in P.T
i m yet to get the concepts clear.
my question is suppose after collecting the stats of the particular table and the cost is very high in that we can find that the particular table is not having index on one leading column
if i go to create index ,then what will be impact after creating index has the cost will decrease ?
somebody saying that eventhough we are create index it will not starting to use that index unless or until that table will collect the statistics .
coz in prev stats index is not there?
is it right? or after creating index it will start to using?
pls let me know.
thanks in advance..

Once statistics are available, the optimizer will be able to evaluate the cost of using the index, as well as a number of other methods of getting the data.
If it thinks using the index will result in a lower cost, it will use the index. However, there are a lot of situations in whch using the index will actually have a higher cost than other paths.
Note that very complex, or very stupidly^H^H^H^H^H^H^H^Hpoorly written, SQL may confuse the optimizer to the point that it does not even realize that an index is available or other costs are better or worse. And there are ways of making some costs totally hidden. (For example - function calls that include their own expensive SQL will probably not be visible to the optimizer.)
The exact interpretation and set of operations, and calcuation of cost, and so on - depends on the exact version AND the patches you have applied.

Inter Project Billing - Questions

Hi,
We have setup Inter Project billing and the process works as expected.
But we still have questions about the Accounting Process - do the ap invoice and the ar invoice hit the same account? and how do we clear the Open Invoices on both AP and AR?
Please Help!!!!
Thanks,
Akshaj

Hi Dina,
A couple more questions.
Following is a table with example transactions below:
GL     Cust. Proj     Internal Proj.     Consolidated
Sales           400
IP-Sales               (200)     (200)
COS               200     200
IP-COS          200          200
Clearing     (200)               (200)
Net Income          200      0
1.     Should the UBR / UER be an internal UBR/UER. Would it not otherwise murky up the UBR/UER for contract projects?
2.     How do the Internal Project and the Customer Project rollup on the GL ? Do we need to have a consolidation project to net IP-Sales and IP-COS
3.     Also - how do we handle scenarios where COS in the internal project is greater than the revenue/billed amount? How does this rollup to the Customer Project?
Please advise.
Thanks.

Discmakers Project: Color Question

Hi,
Using Photoshop and Illustrator CS3 I'm wrapping up a project for a Discmakers digipac. My color management settings are synced...setting: North American General Purpose 2. All my linked images are 300 dpi. The photos were originally RGB then desaturated in Photoshop and given a sepia tone, then saved as CMYK as required by the printer. Everyting looks fine in both Adobe programs but the photos have a strong green tint in any other program. Actually, the same is true for any CMYK desaturated photo. Greyscale black and whites look fine.
My question is: when this goes to the printer will I get the colors I see in Illustrator or the green tinted ones?
I'd be grateful for any suggestions. Thanks.
This is a link to the Discmakers guide:
http://www.discmakers.com/templates/faq.asp

I'm guessing you'll get the color seen in Illustrator. Not all applications are color managed and preview images are unreliable at best. You should, for your own piece-of-mind, have the job contract proofed ( see a local reputable print shop ) before sending it off to the print vendor. You should also supply a contract proof along with the disk so that the print provider has something to match. Then, when the provider runs the file ( get their workflow specs before you have it proofed on your end ) through their prepress department's equipment, they can supply you with a matched proof of their own and, with any luck, they both match and it's off to the races.

Importing projects / sequences question

I started out my project with the wrong resolution (*sigh*) and I'm now trying to save the day by doing the recommended move - starting a new project with correct settings and importing the original project there.
But I'm only getting the entire original project sequence as a big block, with no edits or anything available. Is it supposed to be like that? Or is there a way to get all the separate clips, cuts, edits etc when importing?
Thanks for any help!

You will also find links to many
free tutorials in the PremiereProPedia that will quickly show you how things are done in Premiere Pro.
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

Project manufacturing - Question about process

Hi All,
I am trying to represent the following scenario in a project:
Finished Product (FP)
---RM1 (raw material 1)
---RM2
---semi-finished assembly 1 (SF)
RM3
RM4
We have to assemble FP in the project. If I assign only FP as a material component in the project and run MRP, the system successfully generates planned orders for SF, RM1, RM2, etc.... I can then convert planned orders into purchase requisitions or production orders and do all consumption postings.
But, I want to represent the assembly process in the project, and I think the below assignment should be possible.
WBS
---Network
Activity 1
RM3
RM4
Activity 2
SF1 (-1 - negative quantity)
Activity 3
RM1
RM2
Activity 4
FP (-1 - negative quantity)
The negative quantity should mean that the specified component (SF1 or FP) is assembled in that network activity. However, when I have a negative quantity in the component, MRP is not generating the planned order for that material. Also, it's generating redundant planned orders for RM1, RM2, etc... - once for the reservation for that component and once by exploding the reservation for SF1 or FP. Should I have the reservation / purchase requisition indicator for the individual components set as Never? In that case, do I just post consumption to the respective network activities when the respective RM* is received to stock? Any input you could provide would be greatly appreciated.

Hello Ahmed,
My ultimate goal is to produce FG, right? Now, I am using PP as well. I am trying to figure out what level of BOM should be represented in the project using component assignments also using MRP to create the corresponding procurement parameters. I was asking about the production order for FG, because Mahendra's solution doesn't create a production order for the FG due to the negative quantity in the project. I think he answered that part of the question saying that for the FG, the network acts as the production order and delivers FG to stock. Am I correct? Please let me know.
My explanation may be a little confusing, but please let me know if you need any further clarifications to solve the problem .

Project Tuning Questions

Similar Messages

Maybe you are looking for