Projected Stock-Inventory Report for APO

Hi All,
I have to develop Projected Stock-Inventory Report for APO.
I need to fetch data from APO and need to store it in BI for reporting purpose.
Do you have any idea about how to get the required data from APO system?
Where does stock data resides along with projected stock in any SNP aggregate or any table?
Regards,
Krunalkumar Rathod

Hello,
I suppose you mean you want to export the data "stock on hand" in SNP planning book to BW.
This key figure is an auxiliary key figure that calculated by macro. The data is only diplayed in the planning book but not saved to any database table or liveCache.
In order to save it, you can add your own time-series key figure to save the stock on hand. And you'll need to create your own macro to calculate or copy from the auxiliary key figure.
A good way is you can create a macro by copying the "stock balance" macro and just change the stock on hand key figure to your own time serires key figure. Then when you need the data, you can run the macro in background job. By doing this, the stock data will be saved to the time series key figure. Then you can extract it from liveCache as normal key figures.
Please notice the time-series key figure must be assigned to correct aggregates in an SNP planning area.
Best Regards,
Ada

Similar Messages

Inventory Report For Special Stock (Project Stock)

Dear Sir,
We are in Make -To - Order scenario and procure the material against the WBS element . For getting the Inventory List , we use MBBS tcode but it has following limitation :
a) It give the Stock Status as on date basis . While we need Stock Inventory on a cut off date , say on
31/Jan/2007 .
b) We are not able to get the Inventory Report , Material Group wise
I request to kindly guide me , as how to take the Inventory Report for Project Stock .
Regards
B Mittal

Hi Shailesh,
Is there any way we can include some extra fields into this MC.9 report - i tried but could not find anything. Can you please help.
Regards,
Laxmi

Inventory report for stock category B

Hi everyone,
We are trying to generate a customer stock inventory report with stock category B. The table MARD is not displaying any values annwe also looked at table MKOL. Its not giving us any. How do i get the inventory report for this stock type B. Kindly Advise.

it is customer owned stock. We receiver materials from customer for repair and we recondition them and we give it back. for this we maintain it in stock type B. it is specifically used in aerospace industries. We want to make an inventory report for this customer owned stock in our inventory . i am unable to get the table. Kindly advise

Inventory report for Previous Periods

Hi Experts ,
I would like to have an inventory report for all materials in a Particular Plant for the Periods Sep 2009 and Sep 2010 . Could you please help me in providing the reports for the same .
Thanks
Moderator message: Basic frequently asked question - Please search forum for answers and read the docu in help.sap.com
See as well our rules of engagement: http://scn.sap.com/docs/DOC-18590
A good way to search the forum is with google. See this blog with details for a good search
http://scn.sap.com/community/support/blog/2012/04/16/getting-the-most-out-of-google-optimizing-your-search-queries
This blog describes how to use the SCN search: http://scn.sap.com/community/about/blog/2012/12/04/how-to-use-scn-search
The discussions are not a replacement for proper training
Thread locked
Message was edited by: Jürgen L

You can well run these reports on background..
Go to SE38 Enter the program name "J_1HSTCD"
Then press Execute / F8.
Enter you selection date as 01.09.2009 to 31.09.2010 and enter the plant and leave the all selection as per SAP standard..
Then press F9 or Go to Program

Inventory Report for actuals and projected?

Hi,
currently i am doing APO-BI Project. I have a requirement to extract the Opening stock from ECC and Projected(Forecasted) Opening stock from APO.
both are 2 different key figures 1 is from ECC and another one is from APO. I need to display in Bex report in
say for example, if we have 53 weeks in a year. if i run the report in week 25, in the bex report it has to display the Opening stock values from ECC up to week 25 and remaining weeks till 53 weeks it has to display Projected Opening stock values in the same line.
plz provide me the logic to achieve this report.
regards
venuscm

Hi,
Create Two Cubes one is for APO and another is 0IC_C03 for Inventory. then build a MP on both and create reports.
Use 2LIS_03_BX, 2LIS_03_BF, 2LIS_03_UM to 0IC_C03 Cube and design the report.
Use :See the steps how to load the data to 0IC_C03.
Treatment of historical full loads with Inventory cube
Setting up material movement/inventory with limit locking time
If it is BI 7 then for BX in in DTP in Extraction Tab you need to select Extacrion mode = NON-Cumulative option.
0VALSTCKVAL      " For Value
0VALSTCKQTY      " For Qty
0CALMONTH        " For Month
Use the above combinations in New Selections in columns and go it.
For Qty Opening:
New Selection, drag and drop following InfoObjects
0VALSTCKQTY     " For Qty
0CALMONTH       " For Month and restrict with less then or equalto option variable (single value, user input) and set the offeset
                " value = -1 bcoz if user will give 12.2009 , so it will display 11.2009 closing stock, this is opening for 12.2009.
For Qty Closing:
New Selection, drag and drop following InfoObjects
0VALSTCKQTY    " For Qty
0CALMONTH      " For Month and restrict with less then or equalto option variable (single value, user input) .
In the same way build for Value and other Keyfigures on 0IC_C03.
And
Drag & drop
0MATERAIL
0PLANT " Give some Input Variable.
Thanks
Reddy

One Consolidated MM Inventory report for all inventories

Hello Experts,
I have a requirement to develop an MM inventory report which should include all the below inventories for a given period. basically I have to display the Quantity, Unit price and Value for all these.
1. Stock Beginning value (Similar to MB5B)
2. Stock period end value (Similar to MB5B)
3. Stock in (MSEG-BWART = 101 and 102 )
4. Total available goods
5. Stock out to project ( MSEG-BWART = 261, 921, 961 )
6. Stock out to Cost center ( MSEG-BWART = 201)
7. Stock difference (MSEG-BWART = 701 and 702)
8. Scraping (MSEG-BWART = 501)
I heard that there are separate transactions for each points above. But Is there any consolidated (Standard or Z)report which includes all the above said information.
Thanks in advance,
Balaji

Hi,
Pl. explore this report S_P00_07000139, hope it will help you, else you need to develop a Z Report
Regards,
Vikas
Edited by: Vikas Mayekar on Jul 27, 2009 10:57 AM

INVENTORY REPORT for customer but not consignment company owned

HI Everyone,
I am working on creating an inventory report and sending it out to a customer.
We have a customer who needs to see their inventory we are going to ship. we are making materials for them on an MTS scenario based on a forecast... So the customer before placing a PO should be able to look at the inventory levels we make for them. on a daily basis.... No what I am trying to is execute a program that sends out an inventory report (the programs I am using are( RSMIPROACT and ROEMPROACT)... I try to fill in the fields and save as a variant and we run it as a background job every morning and we send out an idoc to the customer...
The above process is a scenario that still needs to be worked on...
THe customer should be able to look at only his stock and not any other stock....
Now can we use a display of listing/exclusion function to send out the material stock report.... we need to send the total inv as well as the mat numbers... can we acheive it with the listing/exclusion funtion..
Or is there a program that pulls all the data from the tables which store the customer material info record where we maintain all the materials for a customer...
If there i a better way through which this can eb done please suggest me... thank you..
Once again the above stock is not consignent stock... we are manufacturinng based on the forecasts and we need the customer t be able to look at the stock on a daily basis.... Please help...

There is no report / funtionality is SAP to acheive this. Custom program is the only solution. Your logic looks ok, where there is a CMIR maintained, you may pick the total stock from table MARD put into a format/layout and transfer via idoc to the customer.
Thanks & regards
AHP.

Inventory report for valuation type

Hi experts,
Is there any SAP standard reports can show the inventory value based on the valuation type?
we have actived the split valuation, so one material may have several valuation types. Different valuation types have different MAP and amounts. Now we want to find the inventory value for each valuation type, for the whole inventory.
tcode such as MB51 only can display every movement details, we want to find a report for all materials.
Thanks.

Hi
Pls try MB5L
Regards
Sanil Bhandari

Inventory report for the selection of requisitioner and MRP controller

Hello Experts,
Can someone please help me with a standard Inventory report in which we can give input thr requistioner and MRP controller
regards,
YK

Hi,
You will get the requisition no. from EKKO (provided PO has been created otherwise you won't get any record). Find out PO & item no. for the requisition item. Then you can check EKBE table whether GR has been posted or not. If GR has not been posted then there won't be entry in EKBE for that PO & item.
Regards,
Rakesh

Inventory Report for current stock and Safety, Minimum etc stock levels

Hi,
Is there any report available to view the current stock against the minimum, safety stock levels so that the user can plan further actions accordingly. Can anyone please guide me on this.
Thanks in Advance.
Regards,
Laxmi

Hi Shailesh,
Is there any way we can include some extra fields into this MC.9 report - i tried but could not find anything. Can you please help.
Regards,
Laxmi

Stock Pegging Report for Vendor Stock in Subcontractor scenario

Hello all,
As we know, CTM pegs the component inventory available with subcontractor when the parent FG demand drops in. Now, my requirement is can we extract a report that can give the details of all demands that are pegged to the stock?
1. This report should be run in batch after CTM such that it extracts a snapshot of all demands pegged to inventory of components under "vendor stock".
2. This report will give a clear picture to the supply planners about the inventory that is not pegged any demands and can take appropriate action as necessary if there are demands directly for the components.
3. The report should be available in a tabular form listing each of the coomponent materail and the quantity that is pegged and quantity that is not pegged.
If any of you have worked on generating such report earlier or have any ideas to extract such a report, it will be highly appreciated. If my question is not clear and needs further explanation, please let me know. I can describe with examples and numbers.
Thanks,
Chandra

Hi Chandra,
The closest report in terms of various building blocks (table, structure, FMs etc.) is /SAPAPO/DM_PEGKEY_REORG.
The inspiration can be taken from this report and a new report with ALV Grid can be bulit.
Thanks and Best Regards, Manoj

Is it possible to query software inventory report for Oracle SQL developer installation?

Hi all
My company requires to generate a report of all kinds of Oracle database access tool. I can find Toad installation from Add/Remove Program and therefore can query for Toad.
However, Oracle SQL developer is using Java. I cannot see an entry for Oracle SQL developer from Add/Remove Program. Is there a way to query inventory for Oracle SQL developer installation?
Thanks a lot.
Regards
Lic

You might be able to use software inventory to report on the version of sqldeveloper.exe.
As the app looks like just a zip you extract to a custom location that might be one method.

Stock reservation report For customer wise and Document wise

Dear sd experts ...
In my company we have kept some reserved stock to some customers By using MB1B-412E M.type now Requirement is I want to see how much stock kept in reservation for Customers and Document wise also
I Have checked in CO09 But not possible and MCTA also
plz guide me how to find

did you try MMBE ?
also check MB5B, MD04, MB5T

Inventory Report for Statutory

Good Evening Experts,
Please help me in writing the query for the following format.
                             Opening Stock          In Stock                 Stock Transfer         Goods Issue                Closing Stock
                              Qty    Value              Qty    Value            Qty    Value              Qty    Value                  Qty    Value
Item Name
I need this based upon the selection criteria of Posting Date and Whse Code.
Regards,
Umamahesh.

Hi Umamahesh,
Have you checked this:
http://wiki.sdn.sap.com/wiki/display/B1/SAPB1SQLH-INItemInventoryOpeningandClosingStockper+warehouse
Thanks,
Gordon

Finished goods stock statement report for production

Hi guys,
i want to create a report showing these fields:-
Product Code,
Description,
UOM,
Opening Balance,
Receipts From Production,
RMA Receipts (Rejections),
Total,
Dispatched,
Closing Balance,
Physical Stock,
Variance.
With org. code and date range parameters
Pls i need ur inputs on d tables to use and how to link them.
The query basically.
I am using 10g rpts develper.
thank u

and how should we know your table-structure? If you are using the eBusiness-suite, try an eBusiness-related forum, maybe this OA Framework

Projected Stock-Inventory Report for APO

Similar Messages

Maybe you are looking for