Prompt Does not Appear in Infoview

Hi All,
I have 2 Migrated Reports with prompt from BO version 5.1.2 to BO version XIR2 SP2.
These reports show prompt in Deski but the prompt does not appear when exported to Infoview.
I have disabled the option for u2018associate a list of valuesu2019 in the universe for each field.
Also, These reports work fine in BO 5.x.
Thanks in Advance.

Hi Sheeba,
Following solution might help you to resolve the issue.
Place the prompt for the LOV into the report header and republish the affected report to the XI repository. Once this has been done, the affected report should then refresh the LOV properly and display the correct values again as originally designed.
Regards,
Sarbhjeet Kaur

Similar Messages

My query prompts does not appear in the Query prompt order list!

Dear colleagues,
All of my query prompts does not appear in the Query prompt order list in properties of the query. It seems random which of them that appears there and not.
This makes it impossible for me to control or change the order of prompts, instead they order themselves alphabetically.
Is this some kind of bug? Is there a fix for this problem?
Regards
Silje

Hi Stratos,
We use Edge.
Correction- we use Enterprise, changed a few months ago!
By the way, we heard about a bug that probarly causes the problem.
If the query has ever had a prompt containing 'Between', all prompts created afterwards will not appear in the prompt order list! Even if the between-prompt is deleted.. We still havent heard about a fix for this, please contact me if you hear anyting. It is not an option to create all the queries from scratch again!
Silje
Edited by: Silje Mari Sunde on Oct 22, 2009 9:24 AM

GDM Password Prompt Does Not Appear

Alternate Title: systemctl: No space left on device.
I'll preface this by saying that GDM never has any trouble starting; this doesn't seem like the same issue as threads like this one. But when trying to log in, after picking a user or typing in a username and pressing enter... nothing happens. The password prompt never appears. If I've clicked a user in the chooser, it will time out and go back to the chooser after a minute or so.
Whenever I start or stop GDM with systemctl, I get:
Error: No space left on device
This wouldn't be too bad, if GDM worked consistently (it happens with almost any systemctl action). Output from systemctl status is below.
# systemctl status gdm
gdm.service - GNOME Display Manager
Loaded: loaded (/usr/lib/systemd/system/gdm.service; enabled)
Active: active (running) since Sun, 2012-11-25 17:35:13 PST; 1min 9s ago
Main PID: 1005 (gdm-binary)
CGroup: name=systemd:/system/gdm.service
├ 1005 /usr/sbin/gdm-binary
├ 1009 /usr/lib/gdm/gdm-simple-slave --display-id /org/gnome/DisplayManager/Displays/_0
├ 1012 /usr/bin/Xorg :0 -background none -verbose -auth /var/run/gdm/auth-for-gdm-1wTZMv/database -seat seat0 -nolisten tcp vt1
└ 1024 gdm-session-worker [pam/gdm-launch-environment]
Nov 25 17:35:13 saya systemd[1]: Starting GNOME Display Manager...
Nov 25 17:35:13 saya systemd[1]: Started GNOME Display Manager.
Nov 25 17:35:14 saya gdm-simple-slave[1009]: WARNING: Failed to give slave programs access to the display. Trying to proceed.
Nov 25 17:35:22 saya gdm-password][1098]: AccountsService-WARNING: Failed to monitor logind session changes: No space left on device
Also, certainly nothing is out of space:
$ df
Filesystem 1K-blocks Used Available Use% Mounted on
rootfs 15378832 8192380 6405248 57% /
dev 4054552 0 4054552 0% /dev
run 4090384 652 4089732 1% /run
/dev/sda1 15378832 8192380 6405248 57% /
tmpfs 4090384 496 4089888 1% /dev/shm
tmpfs 4090384 0 4090384 0% /sys/fs/cgroup
tmpfs 4090384 264 4090120 1% /tmp
/dev/sda3 70345220 45409040 24936180 65% /mnt/games-ssd
/dev/mapper/vg0-var 82569904 6368676 72006924 9% /var
/dev/mapper/vg0-home 240361984 219289656 8862564 97% /home
/dev/sdc2 208063156 151132036 46445368 77% /mnt/games
The kicker is that sometimes, it works just fine for no apparent reason. Any
ideas?
TIA

[root@arssi gdm]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda1 28G 12G 15G 43% /
dev 2.0G 0 2.0G 0% /dev
run 2.0G 828K 2.0G 1% /run
tmpfs 2.0G 760K 2.0G 1% /dev/shm
tmpfs 2.0G 0 2.0G 0% /sys/fs/cgroup
tmpfs 2.0G 528K 2.0G 1% /tmp
/dev/sda6 304G 208G 81G 72% /home
And inodes:
[root@arssi gdm]# df -i
Filesystem Inodes IUsed IFree IUse% Mounted on
/dev/sda1 1831424 219187 1612237 12% /
dev 505819 400 505419 1% /dev
run 506514 468 506046 1% /run
tmpfs 506514 15 506499 1% /dev/shm
tmpfs 506514 11 506503 1% /sys/fs/cgroup
tmpfs 506514 35 506479 1% /tmp
/dev/sda6 20209664 166212 20043452 1% /home
And btw, this doesn't happen every time.
Usually a reboot or two is enough.
It also may happen during session, if system has been idle for awhile (this hasn't happenned yet to me but for somebody else using this PC).
Last edited by OssiL (2013-09-22 07:27:45)

TS1389 When I go to play a movie, I get prompted that the original file cannot be found. When I do a search on spotlight it cannot be found, but it does appear in my purchases. How do I re-download when it does not appear that it is allowed?

When I go to play a movie, I get prompted that the original file cannot be found. When I do a search on spotlight it cannot be found, but it does appear in my purchases. How do I re-download when it does not appear that it is allowed?

Hello paddyrb154,
Thank you for the details of the issue you are experiencing with your purchased movie in iTunes on your iMac. It sounds like iTunes thinks the movie is on your computer, but it is not located in the iTunes Media folder.
For an issue like this, I recommend deleting the movie from iTunes and downloading it from the iTunes Store again. Use these steps to delete the movie:
Mac or PC
Launch iTunes.
From the Library pop-up menu, choose Movies.
Click Movies in the navigation bar.
Click the movie you want to delete.
Press the Delete key on your keyboard.
In iTunes 11, the movie cover art will remain visible, but a cloud icon will appear on it to allow you to download the item again (in countries that support this).
How to delete content you've downloaded from the iTunes Store, App Store, iBooks Store, or Mac App Store
http://support.apple.com/kb/HT5772
Once you have deleted the movie, you can click on the cloud icon to download the movie again. If you do not see the cloud icon, use the steps in the section titled “Download previous purchases on Mac or PC ” in the following article to download the movie from your list of past purchases in the iTunes Store:
Download past purchases
http://support.apple.com/kb/ht2519
Thank you for using Apple Support Communities.
Best,
Sheila M.

I replaced the original hdd in my early 2008 iMac. I can't move my files that were backed up with Time Machine to my new hdd using Migration Assistant. When prompted to select the "from drive", the ext. hhd does not appears as a selection. Please help!!

I replaced the original hdd in my early 2008 iMac. I can't move my files that were backed up with Time Machine to my new hdd using Migration Assistant. When prompted to select the "from drive", the ext. hhd does not appears as a selection. Please help!!

I'd recommend staring over, Pondini has created an excellent guide on how to use Setup Assistant. I'd recommend begin reading Pondini Setup Assistant tips where he talks about "Second Chance." Assuming your Time Machine backup is sound the restore should be very smooth.
Roger

The password save prompt box does not appear on logging in to certain password protected webpages; is there another way of adding their passwords to Firefox sync?

Dear Firefox tech supporter,
I am Currently running:
Firefox v6.0.2;
Windows 7 fully updated at 19 Sept 2011 15:45 GMT;
Norton Internet Security 2011 (using Identity Safe) fully updated at same time as Windows 7;
Extensions to Firefox-
Norton Toolbar 2011.7.1.3;
Symantec IPS 3.1;
Add to Amazon Wish List Button 7.1;
Minimap Addon 0.3.13
Plugins
The usual suspects from Microsoft, Adobe, Wacom, Apple and Google, all of which are checked and no updates currently found.
With webpages such as <https://shop.avanquest.com/members/?company_rs=51>, PayPal and Windows Live e.g. after correct login details are entered into the online form and login is performed successfully. The "key" symbol does not appear to the left of the "awesome bar", neither does the password save pop up box and so the login details for the site cannot be saved in Firefox sync.
This is not specific to https secure sites, as I have been able to save the passwords for several https secure sites and conversely, I have been unable to save the passwords for some http non secure URLs. I have ensured that, whilst trying to enter a page or site into Firefox sync, it has the only tab open.
There does not seem to be a way of manually entering website details (URL, User Name, Password etc.) into Firefox Sync; how can I save the password details for such sites?
Thanks in advance for your help,
Chris Morris

Make sure that you do not run Firefox in permanent Private Browsing mode.
*https://support.mozilla.com/kb/Private+Browsing
To see all History and Cookie settings, choose:
*Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
*Deselect: [ ] "Always use private browsing mode"
*Tools > Options > Security: Passwords: "Remember passwords for sites"
See also:
*http://kb.mozillazine.org/User_name_and_password_not_remembered
*Saved Password Editor: https://addons.mozilla.org/firefox/addon/saved-password-editor/

I had a new hard drive replaced in my imac. Now my 1st generation apple TV does not appear under devices in itunes. How do I get my apple tv to connect to my computer? My OS is 10.6.8

I had a new hard drive replaced in my imac. Now my 1st generation apple TV does not appear under devices in itunes. How do I get my apple tv to connect to my computer? My OS is 10.6.8

Welcome to the Apple Community.
Navigate to Settings > Computers > Your Library on the Apple TV, you may be told you will lose all synced content, but you can't doing anything abouty this, you won't lose any purchased content that has yet to be transferred. Then select Settings > Computers > Connect To iTunes, note the passcode that appears on screen, click on the device in iTunes and enter the passcode when prompted.

Moved recording does not appear as content

I recently encountered an issue where, when I attempt to move a recording from under a meeting to a Shared Content folder, either the list of Shared Content folders does not appear or, when the move is "successful", the recording is bot listed in the new content location. Interestingly, if I change the URL of the destination location from "content" to "meeting" (http://server/admin/content/sco/... to http://server/admin/meeting/sco/...), the recordng will appear in the list. Unfortunately, under this "meeting view", there is not any editing or offline functionality. The link for the recording continues to be functional and playback works normally, but the recording is otherwise treated as a "meeting" rather than content.
Using the API, I used the sco-by-url XML action to compare the values of an affected recording to an unaffected one, but could not find anything that appeared unusual. Both recordings were identified as the "content" type.
Atempting to edit the video, or make an offline copy, by modifying the usual link produced by clicking those button with the appropriate url-path generates a "Not Found - The selected resource does not exist" error. The editing and offline copy processes worked normally prior to the move.
We are currently running Adobe Connect version 8.2.0.0:
package=8.2.0.1.156.20110921.963902
installer=8.2.0.0.11.20110728.938680
fmg=8.2.0.0.4.20110906.879854
fms=8.1.1.0.2.20110427.772086
presenter=8.2.0.0.6.20110824.924658
cps=8.2.0.1.3.20110920.973276
mssql=8.1.0.0.10.20110311.8644363
teleintercall=8.1.0.0.2.20110207.776631
telepremierena=8.1.0.0.21.20110412.882778
telepremiereemea=8.1.0.0.21.20110412.882778
cpshelp=8.2.0.0.4.20110908.964981
addins=8.2.0.0.3.20110831.929039
dbscripts=8.2.0.0.23.20110818.956139
teleavaya=8.1.0.0.4.20110412.882778
telecisco=8.1.0.0.17.20110412.882778
telemeetingone=8.1.0.0.2.20110207.776631
telephonyservice=8.1.0.0.8.20110228.847019
tomcat=6.0.29
stunnel=4.28
Is there another mechanism Adobe Connect discerns between the content and meetings so far as under with view/interface it will be displayed? Is there a way to correct this behavior for existing files? Thanks for any insight.
Eric

Having support look at this may be the best option. Since you are using your own server, you should call 866-335-2256, wait for the second round of prompts and then option 1. Have your support contract number ready when you call.

Sent mail does not appear in sent mailbox after sending

Sent mail does not appear in sent mailbox after sending

From reports on this site, Yahoo mail doesn't work reliably with Mail. The following steps may help.
Quit Mail. Force quit if necessary.
Back up all data. That means you know you can restore the Mail database, no matter what happens.
Triple-click the line below on this page to select it:
~/Library/Mail/V2/MailData/Envelope Index
Copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder
from the menu bar. Paste into the box that opens (command-V), then press return.
A Finder window will open with a file selected. Move the selected file to the Desktop, leaving the window open. Other files in the folder may have names that begin with "Envelope Index". Move those files, if any, to the Trash.
Log out and log back in. Relaunch Mail. It should prompt you to re-import your messages. You may get a warning that the index is corrupt and that Mail has to quit. Click OK.
Test. If Mail now works as expected, you can delete the file you moved to the Desktop. Otherwise, post your results.

Lightroom 5 file edited in photoshop cc 2014 does not appear back next to original after save. Is anyone else having this issue? If so what is the fix. The edited image appears back in lightroom in a new folder.

Lightroom 5 file edited in photoshop cc 2014 does not appear back next to original after save. Is anyone else having this issue? If so what is the fix. The edited image appears back in lightroom in a new folder.

I'm performing a normal "Save", not "Save As". Work flow I'm using is as follows: Select photo in Lightroom 5.7 >" Edit In" Photoshop CC 2014 > (after working on photo is PS) > Save > close PS. Photo returns to Lightroom 5.7 in a new folder rather than next to the original. Prior to purchasing the monthly plan and upgrading to PS CC 2014, I performed this same work flow using Lightroom 5.6 and Photoshop CS6 without any issues.
Just for fun... I attempted to move the edited file back into the original folder. I received a prompt that said the file already existed in the original folder, however I can't see it except the new folder that LR created. I tried several different sort orders, etc without any success.
*** Follow up: Was unable to resolve the issue using Photoshop CC 2014. Uninstalled PS CC 2014 and went back to using Photoshop CS6. Return trips from LR 5.7 to Photoshop is now performing as it should: returning edited photo back to the original folder in LR 5 and placing next to the original image.
Should anyone have a suggestion on getting Photoshop CC 2014 to do the same, I would love to be educated.
Thanks for the help, dj_paige.

Yahoo toolbar appeared without my consent. Can't get rid of it. Does not appear in list of add-ons or in list of programs installed for uninstall. (Win7; FFx5) Please help me delete this annoyance.)

I was prompted to update Java. I got a YAHOO toolbar which I did and do not want. I can't get rid of it. It does not appear on the Add-on list, not in the programs list (to uninstall). Can't find anything with Yahoo in the name. I do not want to use View, because it keeps coming back into view without my consent -- I want it gone permanently.
The uninstall directions in Yahoo help call for click on pencil tool (which tool is not found on this toolbar). Firefox instructions say go to Add-on list, but the Yahoo bar is not there. There are several Java add-ons, but I don't know what they are and what happens if they are uninstalled.
Win 7; Firefox 5.0; Yahoo toolbar ver 2.3.8.20110620112826
Perhaps it is disguised as something else. If so please tell me what to uninstall.

Try RIGHT clicking on different areas of the toolbars on Firefox, mainly try right clicking on/around the url bar & forward/back navigation buttons. When you get the correct spot if will give you a menu with the toolbars available (whether or not they're active) and a couple other options. Just uncheck the Yahoo one & you should be all set.
As you say though it may be some other bar disguised as a yahoo bar. Any chance you can get a screen shot of it & post it here?

Outlook does not appear as an option when setting up synchronization

I need help. I recently bought the BB Curve 8330. When I attempt to set up the sync configuations between Outlook and the BB, Outlook does not appear as a choice. What do I need to do to get Outlook to appear? I called Verizon customer service and they were not much help. Please help.
I am running MS Vista 2007.
Solved!
Go to Solution.

HI,
On your Blackberry go to OPTIONS/ABOUT the OS version looks like 4.x.x.xxx.
On your outlook are you running any connectors (business, hotmail etc) ?
5. Close and open Blackberry Desktop Manager to perform the synchronization process again and Outlook will be in the list...
Vista commands
1. Right-Click on Command Prompt in Start Menu and choose Run as Administrator
2. Navigate to C:\Program Files\Research in Motion\Blackberry\IS71 Connectors\MS Outlook Connector by typing: c:\> CD program files\research in motion\blackberry\is71 connectors\ms outlook connector
3. Then type in the command prompt, type: regsvr32 MsOutlookConnector.fil
4. If the registration is successful, the following message displays:
DllRegisterSErver in msoutlookconnector.fil succeeded.
5. Close and open Blackberry Desktop Manager to perform the synchronization process again and Outlook will be in the list...
If you receive the error message DllRegisterServer failed with error code 0x80070005 - you do not have admin rights. So, it's important that you run command prompt as admin.
Let me know about the device and the version of desktop software.
Message Edited by Bifocals on 10-30-2008 11:41 PM
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

(LDOM) The file just loaded does not appear to be executable.

Sorry if this is not the right forum - it seems to be the closest one for things about LDOMs; plese let me know if I should post somewhere else.
I have installed LDoms_Manager-1_2.zip on a T5220 Server; following the book ("Logical Domains 1.2 Administration Guide") I set up the control domain etc, then a guest domain (cranachan) - so far all appears well. I downloaded the dvd iso of Solaris 10 (sol-10-u7-ga-sparc-dvd.iso) and added it to the guest as described, started the domain and issued "boot vdisk_iso:f -v" - this seemed to work well, but there was an error that turned out to be that I had given the wrong path for the system disk.
So I started over - removed the guest domain and the disk definitions for both guest and control domain, and removed the guest; then recreated everything. This time, when I "boot vdisk_iso:f -v" I get:
The file just loaded does not appear to be executable.
Any idea what may have happened? It makes no sense to me; not unless the iso file has been corrupted, but it doesn't seem to have been modified, and I can mount it as a loop-back fs in linux.

I have the same problem with a Netra T1 system. Solaris 10 installed fine and it won't boot. It did have Solaris 8 on the system, but I put in new drives to start my Solaris 10 install.
I tried booting to single user cd-rom (ok boot cdrom -s) and ran this:
# installboot /usr/platform/SUNW,UltraAX-i2/lib/fs/ufs/bookblk /dev/rdsk/c1t0d0s1
(SUNW,UltraAX-i2 was derived from # uname -i)
It didn't help.
I also tried "setenv diag-switch? false" at the okay prompt. It didn't help
Any thoughts?

Go - Connect to Server does NOT work - The text entered does not appear to

Two Macs with Mac OS X 10.5.2. Both migrated from Mac OS X 10.4.11. One Mactel and one PowerPC. I can see the former from the latter, but not the latter from the former:
Go/Connect to Server
gives this error all the time for all listed servers:
The text entered does not appear to be a recognized URL format
This does not help:
Mac OS X 10.5: "The text entered does not appear to be a recognized URL format" alert when connecting to server
http://docs.info.apple.com/article.html?artnum=307256
Any idea how to fix it? Thanks.

At this point I think you should get Applejack...
http://www.versiontracker.com/dyn/moreinfo/macosx/19596
After installing, boot holding down CMD+s, then when the prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.
I'd do it on all of them.
Then we can go on from there if you still have a problem, but with several queastions eliminated!

I do I eject a blank CD stuck in my iMac 10.7.5? The CD does not appear on my desktop. Why not?

How do I do I eject a blank CD stuck in my iMa 10.7.5? Also, the CD does not appear on my desktop. Why not?

Here are some ways to eject it, hope this helps.
Five ways to eject a stuck CD or DVD from the optical drive
Ejecting the stuck disc can usually be done in one of the following ways:
1. Restart the computer and after the chime press and hold down the
      left mouse button or track pad until the disc ejects.
2. Press the Eject button on your keyboard at power up.
3. Click on the Eject button in the menubar.
4. Press COMMAND-E.
5. If none of the above work try this: Open the Terminal application in
      your Utilities folder. At the prompt enter or paste the following:
        /usr/bin/drutil eject
If this fails then try this:
Boot the computer into Single-user Mode. At the prompt enter the same command as used above. To restart the computer enter "reboot" at the prompt without quotes.
By Kappy

Prompt Does not Appear in Infoview

Similar Messages

Maybe you are looking for