Prompt Error 'this.htmlData.onDblClickMethod 'is null or is not an object

*## We are on Solaris and upgraded from 10.3.2.1 to 10.1.3.4.1...after the upgrade we noticed that the reports with numeric filters are ## failing (ex: cal_year=2009).*
*## Below is the error message:*
*## A numeric value was expected (received "2009").*
*## Error Details*
*## Error Codes: EHWH2A7E*
*(We had installed the patch correctly)*
After we solve the problem we've find another one :
When you try to save a prompt   (new or modified is the same ) the browser don't send the request to the catalog .
Infact if you see the browser log :     error 'this.htmlData.onDblClickMethod '   is null or is not an object  !!!!!!
Can some one help us ???
Benjiamin

Error Codes: EHWH2A7E is seen in OBIEE 10.1.3.4.1 on Solaris and is reported as a bug. Link is
https://support.oracle.com/CSP/main/article?cmd=show&type=BUG&id=8394579
Look at the following note in Support about this error.
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=PROBLEM&id=870113.1
Hope this helps your specific error.
Cheers,
Kiran

Similar Messages

  • HT204053 Dear Support Team, every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud???

    Dear Support Team,
    Every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud?
    Thanks

    It is not possible to create a new iCloud account using a Windows machine. You must create the account using a Mac (10.7.5 or more) or an IOS device (iPhone etc). Once that is done you can sign into and use the account on your Windows machine.

  • Error 'this.node.parentNode is null or not an object' with search highlight in certain topics

    goto
    http://www.afas.nl/profithelp/2_8_2/SE/index.htm
    Click 'zoeken' (search)
    Be sure that 'Zoekresultaten markeren' (search highlight) is
    checked
    Type 'activa'
    Click the topic 'activa'
    An error is displayed in the bottom left corner:
    'this.node.parentNode is null or not an object'
    If search highlight is not used, the error is not displayed.
    Any ideas?

    I think I have it, but it's almost unbelieveable.
    In the activa topic, the word is highlighted up to a point.
    Coming to the next instance of activa, you have this code:
    <li class=p-BulletedList><p
    class=BulletedList><b><span style="font-weight:
    normal;">V:</b> v</span>aste activa waarop wordt
    afgeschreven (Dit is de standaard waarde) . . . </p>
    Note the superfluous <b> and </b> tags,
    especially with the <span> calling for normal font-weight.
    Suppose this is a valid string. Because the opening tags are
    <b><span . . .>,
    the closing sequence should be
    </span>...</b>
    I'm not sure exactly why the error does what it does.
    Perhaps this is a simple html error that happens to come in
    an awkward place, or
    Because the browser expects </span> first, it treats
    </b> as text, so the <b> never gets closed, which
    confuses the search highlight script.
    I've run into something like this before. Repeated
    application, changes and deletion of font attributes in
    approximately the same place sometimes results in confused tags.
    Similarly, when you apply a build tag to styled text, and perhaps
    change the font attribute, opening and closing tags get confused.
    It may depend on the precise locations where you started and ended
    your highlights during editing.
    You'd expect this to be a harmless html error, but in this
    case, it breaks the highlight code, I believe.
    You're in a better position to test this than I am, so I
    await your results.
    Harvey

  • Premiere Pro CC Error: "This project contained a sequence that could not be opened..."

    I know this problem has been reported previously with Premiere Pro CC (I run 2014). When opening up a recent project, I keep getting this: "Error Adobe Premiere Pro: This project contained a sequence that could not be opened. No sequence preview preset file or codec could be associated with this sequence type." The only solutionm is to open another project, sign ou, then sign in before I get open that other project. This has become a pain...  Is there a permanent fix for this issue that has been reported for quite a while now?
    Thanks for your help.
    Marc

    Hi Marc-Andre d'Anjou,
    I am sorry to hear you're having trouble with this issue. It happens sometimes because of activation problems. The doc that Rameez points to is missing steps for reactivating the Creative Cloud version of Premiere Pro. For Premiere Pro CC, and later, see the section "How to deactivate or sign out" in this document. See the section "How to activate or sign in" in the same document to activate Premiere Pro once more.
    See also this FAQ: FAQ: Why are some codecs and sequence presets missing from my installation of Premiere Pro?
    Thanks,
    Kevin

  • I am using windows 8.1. But I recieved the error This apple id is valid but is not an icloud account. How can I get connected to Icloud?

    I am using Windows 8.1. When I try to connect to Icloud I get the Message: This Apple id is valid, but is not an icloud account.
    How can I get connected to Icloud?

    Hello pmarrone,
    You may only sign up for an iCloud account via one of the following systems or devices.
    You can sign up for iCloud on an iPhone, iPad, or iPod touch with iOS 5 or later, or through System Preferences on a Mac with OS X Lion v10.7.4 or later. Just follow the setup instructions for your iOS device or Mac.
    Creating an iCloud account: Frequently Asked Questions
    http://support.apple.com/kb/HT4436
    Cheers,
    Allen

  • HT1926 this copy of itunes is corrupted or not installed correctly. please reinstall itunes

    I have just updated itunes and have received the error 'this copy of itunes is corrupted or not installed correctly.  Please re-install itunes' whenever I try to open it.  I have read a number of replies to other people asking the same question, but I'm not computer savvy and I'm a little lost as to what to do.  Can anyone explain how a dummie with a computer repairs their itunes!
    Many thanks

    I do not know if iTunes is in your computer at all
    icon in the applications folder = application .
    Download iTunes :
    * http://www.apple.com/itunes/download/

  • This Copy of iTunes is corrupted or not installed properly

    Ran software update and now iTunes shows as v 9.0, but when I run I get the error; This copy of iTunes is corrupted or not installed correctly. Please reinstall iTunes.
    I've gone to the download link on Apple's iTunes web page. The 82.8MB file is downloading as 110MB and when I double click on the .dmg file to open, I get a warning: The following disk images couldn't be opened iTunes9.dmg error -4960.
    Anyone else?

    Not to worry. The package downloaded by Software Update seemed to be b0rken.
    I fixed it like this:
    Download iTunes 9.0.2 here:
    http://appldnld.apple.com.edgesuite.net/content.info.apple.com/iTunes9/061-7197. 20091029.tnz9f/iTunes9.0.2.dmg
    That disk image unpacks an .mpkg (meta package) whereas Software Update downloaded a folder containing packages. Looks like it just unpacked on download instead of install.

  • This bundle is invalid. Apple is not currently accepting applications built with this version of the SDK.

    Hello,
    I'm not Able to post Application with Xcode 4.6.2, while uploading it is giving me error "This bundle is invalid. Apple is not currently accepting applications built with this version of the SDK", Pls advice me what SDK it'll work with?
    Thanks in advance

    Hello Michael, today I received this error when submiting ios app to store using Application Loader. The message is "This bundle is invalid. Apple is not currently accepting applications built with this version of the Xcode". My Xcode version is "Version 5.0.2 (5A3005)", I don't know what to do now, I also uninstalled Xcode and reinstall again but no luck. Any advice?

  • Error Opening Reports (Cannot find Dimension Scenario, Error executing query: the member null doesn't exist in this application)

    Hello,
    two of our users get the following error message, when opening two specific reports:
    First Report: Cannot find Dimension Scenario.
    Second Report: Error executing query: the member null doesn't exist in this application.
    Other users can access these reports, and the same users where the problem occurs can access other reports in the same folder.
    I set the same rights for me, but i can access the reports without problems.
    Somebody encountered the same problem before?

    Hi there,
    I had the same issue a few weeks ago... not sure how it happened but it was related only with my username.
    In order to fix it:
    1. I created a report which does not require to select the scenario in advance. Try to use the default data-grid that you get when you first create a report for example.
    2. When the user runs the report, try to see if he can see the dimension. Do not use the missing dimension on rows or columns. If he can see the dimension, ask him to select one scenario. This will solve the issue.
    3. If he cannot see the dimension, try to change the layout of the report.
    Regards,
    Thanos

  • Coldfusion 10. cfmenu not working. error is 'this.body.firstChild' is null or not an object

    I am using coldfusion 10. cfmenu not working. Error is 'this.body.firstChild' is null or not an object in menu-min.js file.
    Error in line oNode=this.body.firstChild.
    Any body faced same issue? What is the fix of this error.

    I have used the same code.
    <cfmenu name="menu" type="horizontal" fontsize="14" bgcolor="##CCFFFF">
        <cfmenuitem name="acrobat" href="http://www.adobe.com/acrobat" display="Acrobat"/>
        <cfmenuitem name="aftereffects" href="http://www.adobe.com/aftereffects"
            display="After Effects"/>
        <!--- The ColdFusion menu item has a pop-up menu. --->
        <cfmenuitem name="coldfusion"
                href="http://www.adobe.com/products/coldfusion" display="ColdFusion">
            <cfmenuitem name="buy"
                href="http://www.adobe.com/products/coldfusion/buy/" display="Buy"/>
            <cfmenuitem name="devcenter"
                href="http://www.adobe.com/devnet/coldfusion/" display="Developer Center"/>
            <cfmenuitem name="documentation"
                href="http://www.adobe.com/support/documentation/en/coldfusion/"
                    display="Documentation"/>
            <cfmenuitem name="support" href="http://www.adobe.com/support/coldfusion/"
                display="Support"/>
        </cfmenuitem>
        <cfmenuitem name="flex" href="http://www.adobe.com/flex" display="Flex"/>
    </cfmenu>

  • Compressor v4.1.3: can't create mpeg2 movie: Error: This Is Null

    Using Compressor 4.1.3 and FCPX 10.1.4, I attempt to use compressor to create a MPEG2 movie using the "MPEG2 Program Stream, 15mpbs" option. I was successful once, the first time. But I had a problem with that video in that the audio would play but the video would freeze. So any attempt since then fails with the following error:
              Failed 3x Host: [macbook]: Error: this is null.
    I don't change any of the video default options. Just using all of the default options  presented to me. And it fails.
    Seems like a bug in compressor since I'm not changing any options.
    Any idea what the problem might be, or how I can create MPEG2 movies using compressor?
    Thanks, Jim

    WWhat are your  computer specs? Have you made system changes? Did you repair permissions?

  • Trying to create a Photomerge in Bridge, when the files open in Photoshop ( small jegs ) , I get a error message of " Unable to process latte files " / " null is not an object "

    Trying to create a Photomerge in Bridge, when the files open in Photoshop ( small jegs ) , I get a error message of " Unable to process latte files " / " null is not an object "
    Please help

    Wait a second, Photoshop can make lattes now?  Personally I prefer my coffee black, but man have I been under-utilizing this program.

  • Error reading wsdl file excepetion null

    Hi
    I am trying to invoke a proxy service (web service) wsdl from a bpel process. When i add a web service adapter, put url of external web service and save it, all my service end points defined in the BPEL process are becoming non editable. Binding of operation is changing from web service to HTTP binding for all end points. When I try to edit any partner link, Jdev throws an error " error reading wsdl file excepetion null " for local services. For external service, even though i am refering to a url on the server, it points to " C:\Oracle\Middleware\jdeveloper\jdev\bin\...\xxxx?WSDL" and throws same error " failed to read wsdl file(System could not find the path specified". I am just clueless as to why this is happening. Any help is much appreciated.

    Try the SOA Forum - SOA Suite

  • Error : CGImageCreate: invalid image colorspace: NULL.

    Hi,
    I am unable to launch Intellij IDEA from command line using ./idea.sh on my Mac (OS 10.7.4). The intellij IDEA flash screen comes up after which I am seeing the following error and the application hangs -- the IDEA does not open. I have been trying to get over this for a long time but no help. Any help is appreciated.
    bash-3.2$ ./idea.sh
    Dec  7 17:37:28 rahusrivastava.ariba.com java[1789] <Error>: CGImageCreate: invalid image colorspace: NULL.
    Dec  7 17:37:28 rahusrivastava.ariba.com java[1789] <Error>: CGImageCreate: invalid image colorspace: NULL.
    Dec  7 17:37:28 rahusrivastava.ariba.com java[1789] <Error>: CGImageCreate: invalid image colorspace: NULL.
    Dec  7 17:37:28 rahusrivastava.ariba.com java[1789] <Error>: CGImageCreate: invalid image colorspace: NULL.
    Dec  7 17:37:31 rahusrivastava.ariba.com java[1789] <Error>: CGContextGetCTM: invalid context 0x0
    Dec  7 17:37:31 rahusrivastava.ariba.com java[1789] <Error>: CGContextSetBaseCTM: invalid context 0x0
    Dec  7 17:37:31 rahusrivastava.ariba.com java[1789] <Error>: CGContextGetCTM: invalid context 0x0
    Dec  7 17:37:31 rahusrivastava.ariba.com java[1789] <Error>: CGContextSetBaseCTM: invalid context 0x0
    Dec  7 17:37:34 rahusrivastava.ariba.com java[1789] <Error>: CGImageCreate: invalid image colorspace: NULL.
    Dec  7 17:37:34 rahusrivastava.ariba.com java[1789] <Error>: CGImageCreate: invalid image colorspace: NULL.
    Dec  7 17:37:34 rahusrivastava.ariba.com java[1789] <Error>: CGImageCreate: invalid image colorspace: NULL.
    Dec  7 17:37:34 rahusrivastava.ariba.com java[1789] <Error>: CGImageCreate: invalid image colorspace: NULL.
    Dec  7 17:37:34 rahusrivastava.ariba.com java[1789] <Error>: CGImageCreate: invalid image colorspace: NULL.
    2012-12-07 17:37:34.623 java[1789:c07] CWindow's _nativeShow encountered error: *** -[__NSPlaceholderArray initWithObjects:count:]: attempt to insert nil object from objects[0]
    Dec  7 17:37:34 rahusrivastava.ariba.com java[1789] <Error>: CGImageCreate: invalid image colorspace: NULL.
    Dec  7 17:37:34 rahusrivastava.ariba.com java[1789] <Error>: CGImageCreate: invalid image colorspace: NULL.
    bash-3.2$
    Thanks,
    Rahul.

    My input certainly wasn't intended to ba sarcastic, so please forgive me if it seemed so.
    Seroiusly, always do a search before updating, http://discussions.apple.com/search.jspa?objID=f1201&search=Go&q=update+problem, NI is flaky at best IMHO, did you heck with them yet to see if a patch is available?
    Always wait a few weeks before updating, a reinstall is a headache, goodluck!

  • [SOLVED] Rad 7790+Catalyst = Error: unable to open display (null)

    Radeon HD 7790 + Catalyst = Error: unable to open display (null)
    Greetings,
    I've installed Arch 2 days ago(migrated from Fedora), but I'm still a newbie to linux, so please have patience.
    I've bought AMD Radeon HD 7790 recently and decided that it's time to upgrade system, but since then I had only problems with it. No LiveCD I tried (Fedora 20, Mint)  worked properly in graphics mode, so I suspected problem in built-in drivers and moved to linux with text-only installation (Arch), so I could install drivers later.
    I've followed wiki manual and installed catalyst, removed open source driver, added nomodeset parametr to GRUB etc. but I'm still stucked, because Xorg won't start(black screen and errors presented in Logs). Tried googling, but learned nothing except Radeon proprietary drivers are comparable to suicide.
    Versions:
    Kernel: 3-10.40-1-lts (catalyst_build_module sucessful)
    Catalyst: 14.4-10
    Xorg: 1.14.5-11
    Logs&Configs:
    lsmod
    fglrx 8672295 0
    amd_iommu_v2 7174 1 fglrx
    button 4765 1 fglrx
    fglrxinfo
    Error: unable to open display (null)
    Xorg.0.conf
    [ 2632.576]
    X.Org X Server 1.14.5
    Release Date: 2013-12-12
    [ 2632.594] X Protocol Version 11, Revision 0
    [ 2632.600] Build Operating System: Linux 3.12.6-1-ARCH x86_64
    [ 2632.606] Current Operating System: Linux localhost 3.10.40-1-lts #1 SMP Tue May 13 12:50:03 UTC 2014 x86_64
    [ 2632.606] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-lts root=UUID=4f60e723-44e9-4264-8d6c-ca62c43cf69c rw quiet nomodeset
    [ 2632.619] Build Date: 08 January 2014 01:35:51PM
    [ 2632.629]
    [ 2632.635] Current version of pixman: 0.32.4
    [ 2632.646] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 2632.646] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 2632.671] (==) Log file: "/var/log/Xorg.0.log", Time: Sun May 25 00:53:45 2014
    [ 2632.677] (==) Using config file: "/etc/X11/xorg.conf"
    [ 2632.684] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 2632.690] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 2632.690] (==) ServerLayout "aticonfig Layout"
    [ 2632.690] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
    [ 2632.690] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
    [ 2632.690] (**) | |-->Device "aticonfig-Device[0]-0"
    [ 2632.690] (==) Automatically adding devices
    [ 2632.690] (==) Automatically enabling devices
    [ 2632.690] (==) Automatically adding GPU devices
    [ 2632.690] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
    [ 2632.690] Entry deleted from font path.
    [ 2632.690] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 2632.690] Entry deleted from font path.
    [ 2632.690] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 2632.690] Entry deleted from font path.
    [ 2632.690] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 2632.690] Entry deleted from font path.
    [ 2632.690] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 2632.690] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 2632.690] Entry deleted from font path.
    [ 2632.690] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 2632.690] (==) FontPath set to:
    /usr/share/fonts/misc/
    [ 2632.690] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 2632.690] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 2632.690] (II) Loader magic: 0x7fac20
    [ 2632.690] (II) Module ABI versions:
    [ 2632.690] X.Org ANSI C Emulation: 0.4
    [ 2632.690] X.Org Video Driver: 14.1
    [ 2632.690] X.Org XInput driver : 19.1
    [ 2632.691] X.Org Server Extension : 7.0
    [ 2632.692] (--) PCI:*(0:2:0:0) 1002:665c:1458:226a rev 0, Mem @ 0xc0000000/268435456, 0xde800000/8388608, 0xdffc0000/262144, I/O @ 0x0000e800/256, BIOS @ 0x????????/131072
    [ 2632.698] Initializing built-in extension Generic Event Extension
    [ 2632.704] Initializing built-in extension SHAPE
    [ 2632.710] Initializing built-in extension MIT-SHM
    [ 2632.717] Initializing built-in extension XInputExtension
    [ 2632.723] Initializing built-in extension XTEST
    [ 2632.728] Initializing built-in extension BIG-REQUESTS
    [ 2632.734] Initializing built-in extension SYNC
    [ 2632.740] Initializing built-in extension XKEYBOARD
    [ 2632.745] Initializing built-in extension XC-MISC
    [ 2632.751] Initializing built-in extension SECURITY
    [ 2632.756] Initializing built-in extension XINERAMA
    [ 2632.761] Initializing built-in extension XFIXES
    [ 2632.767] Initializing built-in extension RENDER
    [ 2632.772] Initializing built-in extension RANDR
    [ 2632.777] Initializing built-in extension COMPOSITE
    [ 2632.782] Initializing built-in extension DAMAGE
    [ 2632.787] Initializing built-in extension MIT-SCREEN-SAVER
    [ 2632.792] Initializing built-in extension DOUBLE-BUFFER
    [ 2632.797] Initializing built-in extension RECORD
    [ 2632.802] Initializing built-in extension DPMS
    [ 2632.806] Initializing built-in extension X-Resource
    [ 2632.811] Initializing built-in extension XVideo
    [ 2632.816] Initializing built-in extension XVideo-MotionCompensation
    [ 2632.821] Initializing built-in extension XFree86-VidModeExtension
    [ 2632.825] Initializing built-in extension XFree86-DGA
    [ 2632.830] Initializing built-in extension XFree86-DRI
    [ 2632.834] Initializing built-in extension DRI2
    [ 2632.834] (II) "glx" will be loaded by default.
    [ 2632.834] (II) LoadModule: "glx"
    [ 2632.834] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 2632.835] (II) Module glx: vendor="Advanced Micro Devices, Inc."
    [ 2632.835] compiled for 6.9.0, module version = 1.0.0
    [ 2632.839] Loading extension GLX
    [ 2632.839] (II) LoadModule: "fglrx"
    [ 2632.839] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
    [ 2632.863] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
    [ 2632.863] compiled for 1.4.99.906, module version = 14.10.2
    [ 2632.863] Module class: X.Org Video Driver
    [ 2632.863] (II) Loading sub module "fglrxdrm"
    [ 2632.863] (II) LoadModule: "fglrxdrm"
    [ 2632.863] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
    [ 2632.863] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
    [ 2632.863] compiled for 1.4.99.906, module version = 14.10.2
    [ 2632.863] (II) AMD Proprietary Linux Driver Version Identifier:14.10.2
    [ 2632.864] (II) AMD Proprietary Linux Driver Release Identifier: 14.10.1006
    [ 2632.864] (II) AMD Proprietary Linux Driver Build Date: Apr 17 2014 21:15:33
    [ 2632.864] (--) using VT number 2
    [ 2632.885] (WW) Falling back to old probe method for fglrx
    [ 2632.899] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
    [ 2632.901] ukiDynamicMajor: found major device number 250
    [ 2632.901] ukiDynamicMajor: found major device number 250
    [ 2632.901] ukiOpenByBusid: Searching for BusID PCI:2:0:0
    [ 2632.901] ukiOpenDevice: node name is /dev/ati/card0
    [ 2632.901] ukiOpenDevice: open result is 11, (OK)
    [ 2632.901] ukiOpenByBusid: ukiOpenMinor returns 11
    [ 2632.901] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
    [ 2632.904] (--) Chipset Supported AMD Graphics Processor (0x665C) found
    [ 2632.904] (WW) fglrx: No matching Device section for instance (BusID PCI:0@2:0:1) found
    [ 2632.905] (II) fglrx(0): pEnt->device->identifier=0x11bea10
    [ 2632.905] (II) fglrx(0): === [xdl_xs114_atiddxPreInit] === begin
    [ 2632.905] (II) Loading sub module "vgahw"
    [ 2632.905] (II) LoadModule: "vgahw"
    [ 2632.905] (II) Loading /usr/lib/xorg/modules/libvgahw.so
    [ 2632.905] (II) Module vgahw: vendor="X.Org Foundation"
    [ 2632.906] compiled for 1.14.5, module version = 0.1.0
    [ 2632.906] ABI class: X.Org Video Driver, version 14.1
    [ 2632.906] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
    [ 2632.906] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    [ 2632.906] (==) fglrx(0): Default visual is TrueColor
    [ 2632.906] (**) fglrx(0): Option "DPMS" "true"
    [ 2632.906] (==) fglrx(0): RGB weight 888
    [ 2632.906] (II) fglrx(0): Using 8 bits per RGB
    [ 2632.906] (==) fglrx(0): Buffer Tiling is ON
    [ 2632.906] (II) Loading sub module "fglrxdrm"
    [ 2632.906] (II) LoadModule: "fglrxdrm"
    [ 2632.906] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
    [ 2632.906] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
    [ 2632.906] compiled for 1.4.99.906, module version = 14.10.2
    [ 2632.908] ukiDynamicMajor: found major device number 250
    [ 2632.908] ukiDynamicMajor: found major device number 250
    [ 2632.908] ukiOpenByBusid: Searching for BusID PCI:2:0:0
    [ 2632.908] ukiOpenDevice: node name is /dev/ati/card0
    [ 2632.908] ukiOpenDevice: open result is 13, (OK)
    [ 2632.908] ukiOpenByBusid: ukiOpenMinor returns 13
    [ 2632.908] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
    [ 2632.908] (**) fglrx(0): NoAccel = NO
    [ 2632.909] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
    [ 2632.909] (--) fglrx(0): Chipset: "AMD Radeon HD 7700 Series" (Chipset = 0x665c)
    [ 2632.909] (--) fglrx(0): (PciSubVendor = 0x1458, PciSubDevice = 0x226a)
    [ 2632.909] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
    [ 2632.909] (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
    [ 2632.909] (--) fglrx(0): MMIO registers at 0xdffc0000
    [ 2632.909] (--) fglrx(0): I/O port at 0x0000e800
    [ 2632.909] (==) fglrx(0): ROM-BIOS at 0x000c0000
    [ 2632.909] (II) fglrx(0): AC Adapter is used
    [ 2632.914] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
    [ 2632.914] (II) Loading sub module "vbe"
    [ 2632.914] (II) LoadModule: "vbe"
    [ 2632.915] (II) Loading /usr/lib/xorg/modules/libvbe.so
    [ 2632.915] (II) Module vbe: vendor="X.Org Foundation"
    [ 2632.915] compiled for 1.14.5, module version = 1.1.0
    [ 2632.915] ABI class: X.Org Video Driver, version 14.1
    [ 2632.915] (II) fglrx(0): VESA BIOS detected
    [ 2632.915] (II) fglrx(0): VESA VBE Version 3.0
    [ 2632.915] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
    [ 2632.915] (II) fglrx(0): VESA VBE OEM: AMD ATOMBIOS
    [ 2632.915] (II) fglrx(0): VESA VBE OEM Software Rev: 15.32
    [ 2632.915] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2010, Advanced Micro Devices, Inc.
    [ 2632.915] (II) fglrx(0): VESA VBE OEM Product: BONAIRE
    [ 2632.915] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
    [ 2632.915] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
    [ 2632.915] (--) fglrx(0): Video RAM: 2097152 kByte, Type: GDDR5
    [ 2632.915] (II) fglrx(0): PCIE card detected
    [ 2632.915] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
    [ 2632.915] (WW) fglrx(0): board is an unknown third party board, chipset is supported
    [ 2632.915] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf400000000, MCFBSize = 0x80000000)
    [ 2632.915] (II) fglrx(0): RandR 1.2 support is enabled!
    [ 2632.915] (II) fglrx(0): RandR 1.2 rotation support is enabled!
    [ 2632.915] (II) Loading sub module "fb"
    [ 2632.915] (II) LoadModule: "fb"
    [ 2632.916] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 2632.916] (II) Module fb: vendor="X.Org Foundation"
    [ 2632.916] compiled for 1.14.5, module version = 1.0.0
    [ 2632.916] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 2632.916] (II) fglrx(0): EDID Management option: EDID Management is enabled
    [ 2632.916] (II) Loading sub module "ddc"
    [ 2632.916] (II) LoadModule: "ddc"
    [ 2632.916] (II) Module "ddc" already built-in
    [ 2633.034] (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
    [ 2633.034] (II) fglrx(0): Output DFP2 has no monitor section
    [ 2633.034] (II) fglrx(0): Output DFP3 has no monitor section
    [ 2633.034] (II) fglrx(0): Output DFP4 has no monitor section
    [ 2633.034] (II) fglrx(0): Output DFP5 has no monitor section
    [ 2633.034] (II) fglrx(0): Output DFP6 has no monitor section
    [ 2633.034] (II) fglrx(0): Output DFP7 has no monitor section
    [ 2633.034] (II) fglrx(0): Output CRT1 has no monitor section
    [ 2633.034] (II) Loading sub module "ddc"
    [ 2633.034] (II) LoadModule: "ddc"
    [ 2633.034] (II) Module "ddc" already built-in
    [ 2633.034] (II) fglrx(0): Connected Display0: CRT1
    [ 2633.034] (II) fglrx(0): Display0 EDID data ---------------------------
    [ 2633.034] (II) fglrx(0): Manufacturer: GSM Model: 4b31 Serial#: 78077
    [ 2633.034] (II) fglrx(0): Year: 2007 Week: 7
    [ 2633.034] (II) fglrx(0): EDID Version: 1.3
    [ 2633.034] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
    [ 2633.034] (II) fglrx(0): Sync: Separate Composite SyncOnGreen
    [ 2633.034] (II) fglrx(0): Max Image Size [cm]: horiz.: 38 vert.: 30
    [ 2633.034] (II) fglrx(0): Gamma: 2.20
    [ 2633.034] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
    [ 2633.034] (II) fglrx(0): First detailed timing is preferred mode
    [ 2633.034] (II) fglrx(0): redX: 0.639 redY: 0.342 greenX: 0.297 greenY: 0.615
    [ 2633.034] (II) fglrx(0): blueX: 0.146 blueY: 0.068 whiteX: 0.313 whiteY: 0.329
    [ 2633.034] (II) fglrx(0): Supported established timings:
    [ 2633.034] (II) fglrx(0): 720x400@70Hz
    [ 2633.034] (II) fglrx(0): 640x480@60Hz
    [ 2633.034] (II) fglrx(0): 640x480@67Hz
    [ 2633.034] (II) fglrx(0): 640x480@72Hz
    [ 2633.034] (II) fglrx(0): 640x480@75Hz
    [ 2633.034] (II) fglrx(0): 800x600@56Hz
    [ 2633.034] (II) fglrx(0): 800x600@60Hz
    [ 2633.034] (II) fglrx(0): 800x600@72Hz
    [ 2633.034] (II) fglrx(0): 800x600@75Hz
    [ 2633.034] (II) fglrx(0): 832x624@75Hz
    [ 2633.034] (II) fglrx(0): 1024x768@60Hz
    [ 2633.034] (II) fglrx(0): 1024x768@70Hz
    [ 2633.034] (II) fglrx(0): 1024x768@75Hz
    [ 2633.035] (II) fglrx(0): 1280x1024@75Hz
    [ 2633.035] (II) fglrx(0): 1152x864@75Hz
    [ 2633.035] (II) fglrx(0): Manufacturer's mask: 0
    [ 2633.035] (II) fglrx(0): Supported standard timings:
    [ 2633.035] (II) fglrx(0): #0: hsize: 640 vsize 480 refresh: 75 vid: 20273
    [ 2633.035] (II) fglrx(0): #1: hsize: 800 vsize 600 refresh: 75 vid: 20293
    [ 2633.035] (II) fglrx(0): #2: hsize: 1024 vsize 768 refresh: 75 vid: 20321
    [ 2633.035] (II) fglrx(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 2633.035] (II) fglrx(0): Supported detailed timing:
    [ 2633.035] (II) fglrx(0): clock: 108.0 MHz Image Size: 376 x 301 mm
    [ 2633.035] (II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
    [ 2633.035] (II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
    [ 2633.035] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
    [ 2633.035] (II) fglrx(0): Monitor name: L1918S
    [ 2633.035] (II) fglrx(0): Monitor name:
    [ 2633.035] (II) fglrx(0): EDID (in hex):
    [ 2633.035] (II) fglrx(0): 00ffffffffffff001e6d314bfd300100
    [ 2633.035] (II) fglrx(0): 071101036e261e78eaa2a5a3574c9d25
    [ 2633.035] (II) fglrx(0): 115054bfef80314f454f614f81800101
    [ 2633.035] (II) fglrx(0): 010101010101302a009851002a403070
    [ 2633.035] (II) fglrx(0): 1300782d1100001e000000fd00384b1e
    [ 2633.035] (II) fglrx(0): 530e000a202020202020000000fc004c
    [ 2633.035] (II) fglrx(0): 31393138530a202020202020000000fc
    [ 2633.035] (II) fglrx(0): 00200a202020202020202020202000e7
    [ 2633.035] (II) fglrx(0): End of Display0 EDID data --------------------
    [ 2633.035] (II) fglrx(0): Dynamic Surface Resizing Enabled
    [ 2633.036] (II) fglrx(0): EDID for output DFP1
    [ 2633.036] (II) fglrx(0): EDID for output DFP2
    [ 2633.036] (II) fglrx(0): EDID for output DFP3
    [ 2633.036] (II) fglrx(0): EDID for output DFP4
    [ 2633.036] (II) fglrx(0): EDID for output DFP5
    [ 2633.036] (II) fglrx(0): EDID for output DFP6
    [ 2633.036] (II) fglrx(0): EDID for output DFP7
    [ 2633.036] (II) fglrx(0): EDID for output CRT1
    [ 2633.036] (II) fglrx(0): Manufacturer: GSM Model: 4b31 Serial#: 78077
    [ 2633.036] (II) fglrx(0): Year: 2007 Week: 7
    [ 2633.036] (II) fglrx(0): EDID Version: 1.3
    [ 2633.036] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
    [ 2633.036] (II) fglrx(0): Sync: Separate Composite SyncOnGreen
    [ 2633.036] (II) fglrx(0): Max Image Size [cm]: horiz.: 38 vert.: 30
    [ 2633.036] (II) fglrx(0): Gamma: 2.20
    [ 2633.036] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
    [ 2633.036] (II) fglrx(0): First detailed timing is preferred mode
    [ 2633.036] (II) fglrx(0): redX: 0.639 redY: 0.342 greenX: 0.297 greenY: 0.615
    [ 2633.036] (II) fglrx(0): blueX: 0.146 blueY: 0.068 whiteX: 0.313 whiteY: 0.329
    [ 2633.036] (II) fglrx(0): Supported established timings:
    [ 2633.036] (II) fglrx(0): 720x400@70Hz
    [ 2633.036] (II) fglrx(0): 640x480@60Hz
    [ 2633.036] (II) fglrx(0): 640x480@67Hz
    [ 2633.036] (II) fglrx(0): 640x480@72Hz
    [ 2633.036] (II) fglrx(0): 640x480@75Hz
    [ 2633.036] (II) fglrx(0): 800x600@56Hz
    [ 2633.036] (II) fglrx(0): 800x600@60Hz
    [ 2633.036] (II) fglrx(0): 800x600@72Hz
    [ 2633.036] (II) fglrx(0): 800x600@75Hz
    [ 2633.036] (II) fglrx(0): 832x624@75Hz
    [ 2633.037] (II) fglrx(0): 1024x768@60Hz
    [ 2633.037] (II) fglrx(0): 1024x768@70Hz
    [ 2633.037] (II) fglrx(0): 1024x768@75Hz
    [ 2633.037] (II) fglrx(0): 1280x1024@75Hz
    [ 2633.037] (II) fglrx(0): 1152x864@75Hz
    [ 2633.037] (II) fglrx(0): Manufacturer's mask: 0
    [ 2633.037] (II) fglrx(0): Supported standard timings:
    [ 2633.037] (II) fglrx(0): #0: hsize: 640 vsize 480 refresh: 75 vid: 20273
    [ 2633.037] (II) fglrx(0): #1: hsize: 800 vsize 600 refresh: 75 vid: 20293
    [ 2633.037] (II) fglrx(0): #2: hsize: 1024 vsize 768 refresh: 75 vid: 20321
    [ 2633.037] (II) fglrx(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 2633.037] (II) fglrx(0): Supported detailed timing:
    [ 2633.037] (II) fglrx(0): clock: 108.0 MHz Image Size: 376 x 301 mm
    [ 2633.037] (II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
    [ 2633.037] (II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
    [ 2633.037] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
    [ 2633.037] (II) fglrx(0): Monitor name: L1918S
    [ 2633.037] (II) fglrx(0): Monitor name:
    [ 2633.037] (II) fglrx(0): EDID (in hex):
    [ 2633.037] (II) fglrx(0): 00ffffffffffff001e6d314bfd300100
    [ 2633.037] (II) fglrx(0): 071101036e261e78eaa2a5a3574c9d25
    [ 2633.037] (II) fglrx(0): 115054bfef80314f454f614f81800101
    [ 2633.037] (II) fglrx(0): 010101010101302a009851002a403070
    [ 2633.037] (II) fglrx(0): 1300782d1100001e000000fd00384b1e
    [ 2633.037] (II) fglrx(0): 530e000a202020202020000000fc004c
    [ 2633.037] (II) fglrx(0): 31393138530a202020202020000000fc
    [ 2633.037] (II) fglrx(0): 00200a202020202020202020202000e7
    [ 2633.037] (II) fglrx(0): Printing probed modes for output CRT1
    [ 2633.037] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
    [ 2633.037] (II) fglrx(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "1280x960"x75.0 135.00 1280 1296 1440 1688 960 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1328 1440 1688 960 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "1280x768"x75.0 135.00 1280 1296 1440 1688 768 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "1280x768"x60.0 108.00 1280 1328 1440 1688 768 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "1280x720"x75.0 135.00 1280 1296 1440 1688 720 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "1280x720"x60.0 108.00 1280 1328 1440 1688 720 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "800x600"x72.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "640x480"x72.0 31.50 640 656 696 832 480 481 484 520 -hsync -vsync (37.9 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "640x480"x67.0 27.28 640 664 728 816 480 481 484 499 -hsync +vsync (33.4 kHz e)
    [ 2633.037] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 2633.037] (II) fglrx(0): Output DFP1 disconnected
    [ 2633.037] (II) fglrx(0): Output DFP2 disconnected
    [ 2633.037] (II) fglrx(0): Output DFP3 disconnected
    [ 2633.037] (II) fglrx(0): Output DFP4 disconnected
    [ 2633.037] (II) fglrx(0): Output DFP5 disconnected
    [ 2633.038] (II) fglrx(0): Output DFP6 disconnected
    [ 2633.038] (II) fglrx(0): Output DFP7 disconnected
    [ 2633.038] (II) fglrx(0): Output CRT1 connected
    [ 2633.038] (II) fglrx(0): Using exact sizes for initial modes
    [ 2633.038] (II) fglrx(0): Output CRT1 using initial mode 1280x1024
    [ 2633.038] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 2633.038] (II) fglrx(0): DPI set to (96, 96)
    [ 2633.038] (II) fglrx(0): Eyefinity capable adapter detected.
    [ 2633.038] (II) fglrx(0): Adapter AMD Radeon HD 7700 Series has 6 configurable heads and 1 displays connected.
    [ 2633.038] (==) fglrx(0): PseudoColor visuals disabled
    [ 2633.038] (II) Loading sub module "ramdac"
    [ 2633.038] (II) LoadModule: "ramdac"
    [ 2633.038] (II) Module "ramdac" already built-in
    [ 2633.038] (==) fglrx(0): NoDRI = NO
    [ 2633.038] (==) fglrx(0): Capabilities: 0x00000000
    [ 2633.038] (==) fglrx(0): CapabilitiesEx: 0x00000000
    [ 2633.038] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
    [ 2633.038] (==) fglrx(0): UseFastTLS=0
    [ 2633.038] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
    [ 2633.038] (--) Depth 24 pixmap format is 32 bpp
    [ 2633.038] Loading extension ATIFGLRXDRI
    [ 2633.038] (II) fglrx(0): doing swlDriScreenInit
    [ 2633.038] (II) fglrx(0): swlDriScreenInit for fglrx driver
    [ 2633.039] ukiDynamicMajor: found major device number 250
    [ 2633.039] ukiDynamicMajor: found major device number 250
    [ 2633.039] ukiDynamicMajor: found major device number 250
    [ 2633.039] ukiOpenByBusid: Searching for BusID PCI:2:0:0
    [ 2633.039] ukiOpenDevice: node name is /dev/ati/card0
    [ 2633.039] ukiOpenDevice: open result is 14, (OK)
    [ 2633.039] ukiOpenByBusid: ukiOpenMinor returns 14
    [ 2633.039] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
    [ 2633.039] (II) fglrx(0): [uki] DRM interface version 1.0
    [ 2633.039] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:2:0:0"
    [ 2633.039] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x3c000
    [ 2633.039] (II) fglrx(0): [uki] mapped SAREA 0x3c000 to 0x7f000fd0d000
    [ 2633.039] (II) fglrx(0): [uki] framebuffer handle = 0x3d000
    [ 2633.039] (II) fglrx(0): [uki] added 1 reserved context for kernel
    [ 2633.039] (II) fglrx(0): swlDriScreenInit done
    [ 2633.039] (II) fglrx(0): Kernel Module Version Information:
    [ 2633.039] (II) fglrx(0): Name: fglrx
    [ 2633.039] (II) fglrx(0): Version: 14.10.2
    [ 2633.039] (II) fglrx(0): Date: Apr 17 2014
    [ 2633.039] (II) fglrx(0): Desc: AMD FireGL DRM kernel module
    [ 2633.039] (II) fglrx(0): Kernel Module version matches driver.
    [ 2633.039] (II) fglrx(0): Kernel Module Build Time Information:
    [ 2633.039] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.10.40-1-lts
    [ 2633.039] (II) fglrx(0): Build-Kernel MODVERSIONS: yes
    [ 2633.039] (II) fglrx(0): Build-Kernel __SMP__: yes
    [ 2633.039] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
    [ 2633.039] (II) fglrx(0): [uki] register handle = 0x0003e000
    [ 2633.040] (II) fglrx(0): DRI initialization successfull
    [ 2633.040] (II) fglrx(0): FBADPhys: 0xf400000000 FBMappedSize: 0x01040000
    [ 2633.041] (==) fglrx(0): Backing store disabled
    [ 2633.041] Loading extension FGLRXEXTENSION
    [ 2633.041] (**) fglrx(0): DPMS enabled
    [ 2633.041] (II) fglrx(0): Initialized in-driver Xinerama extension
    [ 2633.041] (**) fglrx(0): Textured Video is enabled.
    [ 2633.041] (II) LoadModule: "glesx"
    [ 2633.042] (II) Loading /usr/lib/xorg/modules/glesx.so
    [ 2633.043] (II) Module glesx: vendor="X.Org Foundation"
    [ 2633.043] compiled for 1.4.99.906, module version = 1.0.0
    [ 2633.043] Loading extension GLESX
    [ 2633.043] (II) fglrx(0): GLESX enableFlags = 8784
    [ 2633.043] (II) fglrx(0): GLESX is enabled
    [ 2633.043] (II) LoadModule: "amdxmm"
    [ 2633.043] (II) Loading /usr/lib/xorg/modules/amdxmm.so
    [ 2633.043] (II) Module amdxmm: vendor="X.Org Foundation"
    [ 2633.043] compiled for 1.4.99.906, module version = 2.0.0
    [ 2633.055] Loading extension AMDXVOPL
    [ 2633.055] Loading extension AMDXVBA
    [ 2633.055] (II) fglrx(0): Enable composite support successfully
    [ 2633.055] (WW) fglrx(0): Option "VendorName" is not used
    [ 2633.055] (WW) fglrx(0): Option "ModelName" is not used
    [ 2633.055] (II) fglrx(0): X context handle = 0x1
    [ 2633.055] (II) fglrx(0): [DRI] installation complete
    [ 2633.055] (==) fglrx(0): Silken mouse enabled
    [ 2633.056] (==) fglrx(0): Using HW cursor of display infrastructure!
    [ 2633.056] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 2633.414] (--) RandR disabled
    [ 2633.432] ukiDynamicMajor: found major device number 250
    [ 2633.432] ukiDynamicMajor: found major device number 250
    [ 2633.432] ukiOpenByBusid: Searching for BusID PCI:2:0:0
    [ 2633.432] ukiOpenDevice: node name is /dev/ati/card0
    [ 2633.432] ukiOpenDevice: open result is 15, (OK)
    [ 2633.432] ukiOpenByBusid: ukiOpenMinor returns 15
    [ 2633.432] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
    [ 2633.432] (EE) AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory]
    [ 2633.443] ukiDynamicMajor: found major device number 250
    [ 2633.443] ukiDynamicMajor: found major device number 250
    [ 2633.443] ukiDynamicMajor: found major device number 250
    [ 2633.443] ukiOpenDevice: node name is /dev/ati/card0
    [ 2633.443] ukiOpenDevice: open result is 16, (OK)
    [ 2633.443] ukiGetBusid returned 'PCI:2:0:0'
    [ 2633.443] ukiOpenDevice: node name is /dev/ati/card1
    [ 2633.443] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.443] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.443] ukiOpenDevice: Open failed
    [ 2633.443] ukiOpenDevice: node name is /dev/ati/card2
    [ 2633.443] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.443] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.443] ukiOpenDevice: Open failed
    [ 2633.443] ukiOpenDevice: node name is /dev/ati/card3
    [ 2633.444] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.444] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.444] ukiOpenDevice: Open failed
    [ 2633.444] ukiOpenDevice: node name is /dev/ati/card4
    [ 2633.444] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.444] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.444] ukiOpenDevice: Open failed
    [ 2633.444] ukiOpenDevice: node name is /dev/ati/card5
    [ 2633.444] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.444] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.444] ukiOpenDevice: Open failed
    [ 2633.444] ukiOpenDevice: node name is /dev/ati/card6
    [ 2633.444] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.444] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.444] ukiOpenDevice: Open failed
    [ 2633.444] ukiOpenDevice: node name is /dev/ati/card7
    [ 2633.444] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.444] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.444] ukiOpenDevice: Open failed
    [ 2633.444] ukiOpenDevice: node name is /dev/ati/card8
    [ 2633.444] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.445] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.445] ukiOpenDevice: Open failed
    [ 2633.445] ukiOpenDevice: node name is /dev/ati/card9
    [ 2633.445] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.445] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.445] ukiOpenDevice: Open failed
    [ 2633.445] ukiOpenDevice: node name is /dev/ati/card10
    [ 2633.445] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.445] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.445] ukiOpenDevice: Open failed
    [ 2633.445] ukiOpenDevice: node name is /dev/ati/card11
    [ 2633.445] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.445] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.445] ukiOpenDevice: Open failed
    [ 2633.445] ukiOpenDevice: node name is /dev/ati/card12
    [ 2633.445] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.445] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.445] ukiOpenDevice: Open failed
    [ 2633.445] ukiOpenDevice: node name is /dev/ati/card13
    [ 2633.445] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.445] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.446] ukiOpenDevice: Open failed
    [ 2633.446] ukiOpenDevice: node name is /dev/ati/card14
    [ 2633.446] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.446] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.446] ukiOpenDevice: Open failed
    [ 2633.446] ukiOpenDevice: node name is /dev/ati/card15
    [ 2633.446] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.446] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.446] ukiOpenDevice: Open failed
    [ 2633.446] ukiDynamicMajor: found major device number 250
    [ 2633.446] ukiOpenByBusid: Searching for BusID PCI:2:0:0
    [ 2633.446] ukiOpenDevice: node name is /dev/ati/card0
    [ 2633.446] ukiOpenDevice: open result is 16, (OK)
    [ 2633.446] ukiOpenByBusid: ukiOpenMinor returns 16
    [ 2633.446] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
    [ 2633.525] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
    [ 2633.526] ukiDynamicMajor: found major device number 250
    [ 2633.526] ukiDynamicMajor: found major device number 250
    [ 2633.526] ukiDynamicMajor: found major device number 250
    [ 2633.526] ukiOpenDevice: node name is /dev/ati/card0
    [ 2633.526] ukiOpenDevice: open result is 17, (OK)
    [ 2633.526] ukiGetBusid returned 'PCI:2:0:0'
    [ 2633.526] ukiOpenDevice: node name is /dev/ati/card1
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: Open failed
    [ 2633.526] ukiOpenDevice: node name is /dev/ati/card2
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: Open failed
    [ 2633.526] ukiOpenDevice: node name is /dev/ati/card3
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: Open failed
    [ 2633.526] ukiOpenDevice: node name is /dev/ati/card4
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: Open failed
    [ 2633.526] ukiOpenDevice: node name is /dev/ati/card5
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: Open failed
    [ 2633.526] ukiOpenDevice: node name is /dev/ati/card6
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: Open failed
    [ 2633.526] ukiOpenDevice: node name is /dev/ati/card7
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: Open failed
    [ 2633.526] ukiOpenDevice: node name is /dev/ati/card8
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: Open failed
    [ 2633.526] ukiOpenDevice: node name is /dev/ati/card9
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.526] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.527] ukiOpenDevice: Open failed
    [ 2633.527] ukiOpenDevice: node name is /dev/ati/card10
    [ 2633.527] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.527] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.527] ukiOpenDevice: Open failed
    [ 2633.527] ukiOpenDevice: node name is /dev/ati/card11
    [ 2633.527] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.527] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.527] ukiOpenDevice: Open failed
    [ 2633.527] ukiOpenDevice: node name is /dev/ati/card12
    [ 2633.527] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.527] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.527] ukiOpenDevice: Open failed
    [ 2633.527] ukiOpenDevice: node name is /dev/ati/card13
    [ 2633.527] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.527] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.527] ukiOpenDevice: Open failed
    [ 2633.527] ukiOpenDevice: node name is /dev/ati/card14
    [ 2633.527] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.527] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.527] ukiOpenDevice: Open failed
    [ 2633.527] ukiOpenDevice: node name is /dev/ati/card15
    [ 2633.527] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.527] ukiOpenDevice: open result is -1, (No such device)
    [ 2633.527] ukiOpenDevice: Open failed
    [ 2633.527] ukiDynamicMajor: found major device number 250
    [ 2633.527] ukiOpenByBusid: Searching for BusID PCI:2:0:0
    [ 2633.527] ukiOpenDevice: node name is /dev/ati/card0
    [ 2633.527] ukiOpenDevice: open result is 17, (OK)
    [ 2633.527] ukiOpenByBusid: ukiOpenMinor returns 17
    [ 2633.527] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
    [ 2633.546] (II) fglrx(0): OverDrive6 Detected!
    [ 2633.551] (II) fglrx(0): Setting screen physical size to 338 x 270
    [ 2633.594] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    [ 2633.594] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 2633.594] (II) LoadModule: "evdev"
    [ 2633.595] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 2633.595] (II) Module evdev: vendor="X.Org Foundation"
    [ 2633.595] compiled for 1.14.3, module version = 2.8.2
    [ 2633.595] Module class: X.Org XInput Driver
    [ 2633.595] ABI class: X.Org XInput driver, version 19.1
    [ 2633.595] (II) Using input driver 'evdev' for 'Power Button'
    [ 2633.595] (**) Power Button: always reports core events
    [ 2633.595] (**) evdev: Power Button: Device: "/dev/input/event3"
    [ 2633.595] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 2633.595] (--) evdev: Power Button: Found keys
    [ 2633.595] (II) evdev: Power Button: Configuring as keyboard
    [ 2633.595] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
    [ 2633.595] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 2633.595] (**) Option "xkb_rules" "evdev"
    [ 2633.595] (**) Option "xkb_model" "pc104"
    [ 2633.595] (**) Option "xkb_layout" "us"
    [ 2633.634] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 2633.634] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 2633.634] (II) Using input driver 'evdev' for 'Power Button'
    [ 2633.634] (**) Power Button: always reports core events
    [ 2633.634] (**) evdev: Power Button: Device: "/dev/input/event2"
    [ 2633.634] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 2633.634] (--) evdev: Power Button: Found keys
    [ 2633.634] (II) evdev: Power Button: Configuring as keyboard
    [ 2633.634] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
    [ 2633.634] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [ 2633.634] (**) Option "xkb_rules" "evdev"
    [ 2633.634] (**) Option "xkb_model" "pc104"
    [ 2633.634] (**) Option "xkb_layout" "us"
    [ 2633.635] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event1)
    [ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
    [ 2633.635] (II) Using input driver 'evdev' for 'Logitech USB-PS/2 Optical Mouse'
    [ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
    [ 2633.635] (**) evdev: Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event1"
    [ 2633.635] (--) evdev: Logitech USB-PS/2 Optical Mouse: Vendor 0x46d Product 0xc051
    [ 2633.635] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
    [ 2633.635] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
    [ 2633.635] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found relative axes
    [ 2633.635] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
    [ 2633.635] (II) evdev: Logitech USB-PS/2 Optical Mouse: Configuring as mouse
    [ 2633.635] (II) evdev: Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support
    [ 2633.635] (**) evdev: Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
    [ 2633.635] (**) evdev: Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 2633.635] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input1/event1"
    [ 2633.635] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 8)
    [ 2633.635] (II) evdev: Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
    [ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
    [ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
    [ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
    [ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
    [ 2633.635] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
    [ 2633.635] (II) No input driver specified, ignoring this device.
    [ 2633.636] (II) This device may have been added with another device file.
    [ 2633.636] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
    [ 2633.636] (II) No input driver specified, ignoring this device.
    [ 2633.636] (II) This device may have been added with another device file.
    [ 2633.636] (II) config/udev: Adding input device HDA NVidia Line Out (/dev/input/event6)
    [ 2633.636] (II) No input driver specified, ignoring this device.
    [ 2633.636] (II) This device may have been added with another device file.
    [ 2633.636] (II) config/udev: Adding input device HDA NVidia Line (/dev/input/event7)
    [ 2633.636] (II) No input driver specified, ignoring this device.
    [ 2633.636] (II) This device may have been added with another device file.
    [ 2633.637] (II) config/udev: Adding input device HDA NVidia Rear Mic (/dev/input/event8)
    [ 2633.637] (II) No input driver specified, ignoring this device.
    [ 2633.637] (II) This device may have been added with another device file.
    [ 2633.637] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=10 (/dev/input/event10)
    [ 2633.637] (II) No input driver specified, ignoring this device.
    [ 2633.637] (II) This device may have been added with another device file.
    [ 2633.637] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=9 (/dev/input/event11)
    [ 2633.637] (II) No input driver specified, ignoring this device.
    [ 2633.637] (II) This device may have been added with another device file.
    [ 2633.638] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=8 (/dev/input/event12)
    [ 2633.638] (II) No input driver specified, ignoring this device.
    [ 2633.638] (II) This device may have been added with another device file.
    [ 2633.638] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=7 (/dev/input/event13)
    [ 2633.638] (II) No input driver specified, ignoring this device.
    [ 2633.638] (II) This device may have been added with another device file.
    [ 2633.638] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event14)
    [ 2633.638] (II) No input driver specified, ignoring this device.
    [ 2633.638] (II) This device may have been added with another device file.
    [ 2633.638] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=11 (/dev/input/event9)
    [ 2633.639] (II) No input driver specified, ignoring this device.
    [ 2633.639] (II) This device may have been added with another device file.
    [ 2633.639] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 2633.639] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 2633.639] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 2633.639] (**) AT Translated Set 2 keyboard: always reports core events
    [ 2633.639] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 2633.639] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 2633.639] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 2633.639] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 2633.639] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 2633.639] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
    [ 2633.639] (**) Option "xkb_rules" "evdev"
    [ 2633.639] (**) Option "xkb_model" "pc104"
    [ 2633.639] (**) Option "xkb_layout" "us"
    [ 2633.640] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
    [ 2633.640] (II) No input driver specified, ignoring this device.
    [ 2633.640] (II) This device may have been added with another device file.
    [ 2635.885] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
    [ 2639.300] (II) AIGLX: Suspending AIGLX clients for VT switch
    [ 2639.300] (II) fglrx(0): Backup framebuffer data.
    [ 2639.333] (II) fglrx(0): Backup complete.
    [ 2653.729] (II) evdev: AT Translated Set 2 keyboard: Close
    [ 2653.730] (II) UnloadModule: "evdev"
    [ 2653.730] (II) evdev: Logitech USB-PS/2 Optical Mouse: Close
    [ 2653.730] (II) UnloadModule: "evdev"
    [ 2653.730] (II) evdev: Power Button: Close
    [ 2653.730] (II) UnloadModule: "evdev"
    [ 2653.730] (II) evdev: Power Button: Close
    [ 2653.730] (II) UnloadModule: "evdev"
    [ 2653.732] (II) fglrx(0): Shutdown CMMQS
    [ 2653.735] (II) fglrx(0): [uki] removed 1 reserved context for kernel
    [ 2653.735] (II) fglrx(0): [uki] unmapping 8192 bytes of SAREA 0x3c000 at 0x7f000fd0d000
    [ 2653.735] (EE)
    [ 2653.740] (EE) Backtrace:
    [ 2653.745] (EE) 0: Xorg (xorg_backtrace+0x3d) [0x57e04d]
    [ 2653.750] (EE) 1: Xorg (0x400000+0x181da9) [0x581da9]
    [ 2653.754] (EE) 2: /usr/lib/libpthread.so.0 (0x7f000f1e8000+0xf4b0) [0x7f000f1f74b0]
    [ 2653.759] (EE) 3: /usr/lib/libpciaccess.so.0 (0x7f000f406000+0x503e) [0x7f000f40b03e]
    [ 2653.765] (EE) 4: /usr/lib/xorg/modules/drivers/fglrx_drv.so (amd_xs113_int10_x_inb+0x46) [0x7f000bb46126]
    [ 2653.771] (EE) 5: /usr/lib/xorg/modules/drivers/fglrx_drv.so (0x7f000b15c000+0x9e2e05) [0x7f000bb3ee05]
    [ 2653.776] (EE) 6: /usr/lib/xorg/modules/drivers/fglrx_drv.so (X86EMU_exec+0xa5) [0x7f000bb32555]
    [ 2653.782] (EE) 7: /usr/lib/xorg/modules/drivers/fglrx_drv.so (amd_xs113_int10_xf86ExecX86int10+0x46) [0x7f000bb47286]
    [ 2653.788] (EE) 8: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xf86ExecX86int10+0xd) [0x7f000b56897d]
    [ 2653.793] (EE) 9: /usr/lib/xorg/modules/libvbe.so (VBESetVBEMode+0x9d) [0x7f000ab0163d]
    [ 2653.799] (EE) 10: /usr/lib/xorg/modules/drivers/fglrx_drv.so (0x7f000b15c000+0x441623) [0x7f000b59d623]
    [ 2653.805] (EE) 11: /usr/lib/xorg/modules/drivers/fglrx_drv.so (atiddxVBESetConsoleMode+0x44) [0x7f000b59d474]
    [ 2653.811] (EE) 12: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xdl_xs114_atiddxFreeScreen+0x73e) [0x7f000b6ffc1e]
    [ 2653.817] (EE) 13: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xdl_xs114_atiddxCloseScreen+0x321) [0x7f000b6ff241]
    [ 2653.823] (EE) 14: /usr/lib/xorg/modules/drivers/fglrx_drv.so (0x7f000b15c000+0xa4a846) [0x7f000bba6846]
    [ 2653.828] (EE) 15: Xorg (0x400000+0xc3136) [0x4c3136]
    [ 2653.833] (EE) 16: Xorg (0x400000+0x106964) [0x506964]
    [ 2653.838] (EE) 17: Xorg (0x400000+0x24cd7) [0x424cd7]
    [ 2653.843] (EE) 18: /usr/lib/libc.so.6 (__libc_start_main+0xf0) [0x7f000e058000]
    [ 2653.848] (EE) 19: Xorg (0x400000+0x24f0f) [0x424f0f]
    [ 2653.857] (EE)
    [ 2653.861] (EE) Segmentation fault at address 0x0
    [ 2653.866] (EE)
    Fatal server error:
    [ 2653.874] (EE) Caught signal 11 (Segmentation fault). Server aborting
    [ 2653.878] (EE)
    [ 2653.883] (EE)
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    [ 2653.899] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [ 2653.904] (EE)
    [ 2653.908] (EE) Server terminated with error (1). Closing log file.
    xorg.conf
    Section "ServerLayout"
    Identifier "aticonfig Layout"
    Screen 0 "aticonfig-Screen[0]-0" 0 0
    EndSection
    Section "Module"
    EndSection
    Section "Monitor"
    Identifier "aticonfig-Monitor[0]-0"
    Option "VendorName" "ATI Proprietary Driver"
    Option "ModelName" "Generic Autodetecting Monitor"
    Option "DPMS" "true"
    EndSection
    Section "Device"
    Identifier "aticonfig-Device[0]-0"
    Driver "fglrx"
    BusID "PCI:2:0:0"
    EndSection
    Section "Screen"
    Identifier "aticonfig-Screen[0]-0"
    Device "aticonfig-Device[0]-0"
    Monitor "aticonfig-Monitor[0]-0"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    I'm sure that the main problem is between keyboard and chair, but I'd like to know, what's wrong with pc
    Thanks for your efforts.
    Last edited by Mytrin (2014-05-25 19:09:02)

    I've managed to solve this error:
    (EE) AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory
    There was missing library and few directories, which I found according to this http://www.reddit.com/r/archlinux/comme … _correctly at /usr/lib/dri, so I had to just symlink it. However, "unable to open display" error is still annoying me and Xorg is not working.
    EDIT: Found EE about missing commands in new Xorg.0.log and installed xterm to solve this. Now I don't have entirely black screen after startx. There is white rectangular terminal and fglrxinfo seems to be all right as it detected my Radeon and OpenGL. Now I have to install some DE, but that's another story. Marking as [SOLVED] and once again thanks to clfarron4 for reply.
    Last edited by Mytrin (2014-05-25 19:06:09)

Maybe you are looking for