Prompt Hierarchy in BO WEBI Report

Hi,
currently we have to implement a functionality in BO WEBI report Prompt where Network and Equipment 2 prompt  fields
are present.
User want if they select a Network then the Equipment that belong to that selected Network should shown in Drop Down Values
of Equipment Prompt.
This is a type of Prompt Hierarchy.
Source for the WEBi Report is BW Bex Query. and there is no Hierarchy maintained in Network and Equipment at Bex and
Bw system as well.
Please let me know how can i achieve this.
we are Using SAP-BI4.0 solution.
Regards
Atul

Hi Atul,
You can achieve this by dragging these two fields in the filter bar section of the webi. then apply variables on these fields.
hope it helps
Regards,
Rathy

Similar Messages

  • Hierarchy variable in Webi report

    Dear all ,
    I'm expirence some problems in the Olap Universe , my question is :
    I can't see data in Webi report .
    Step 1 Create the webi report
    Step 2 Run the query
    Step 3 Select the Hierarchy variables in prompt parameter
    Step 4 Get the msg "No data to retreive "
    I can see the data in  BW with this Hierarchy variable so i don't understand what it's missing .
    Thanks a lot
    Bst Rgds
    Simon

    Dear Sanket ,
    Thanks for your response  , We are using the dimension it's a member of one hierarchy in the query panel without any filter .
    BOE release 3.1 Sp3
    BW 7.01 SP6 .
    Hope this helps , any further question please let me know .
    Bst Rgds
    Simon

  • Bex Hierarchy issue on Webi report

    Hello Experts,
    We are facing issues on use of Bex hierarchy in webi report,
    Issue statement: We have webi report on bex query which have table and chart with input control on year and month to filter the report, table and chart uses hierarchy object to disply data. When we refresh report table and chart shows data with hierarchy on first level but once we check or uncheck any value from input control hierarchy in table and chart gets expanded and shows as flat structure. to get correct behaviour we have to collaps hierarchy.
    Above behaviour happens for all report level filter like, block filter, drill filter, input control.
    Please help me to know this is a bug or something wrong happened with development.
    Regards,
    Priyank Bhayani

    Hello Everyone,
    I have got SAP note which states this is expected behaviour hence closing the discussion.
    1702356 - Hierarchy Nodes expanded automatically to all levels after selecting value in the input control in a webi report.
    Regards,
    Priyank Bhayani

  • How to Sort prompt date in BO Webi report

    Hi Gurus,
    I am facing a critical issue in selecting date prompt in my webi report.
    Please find the below image as the dates are not getting sorted as per year.
    Please suggest solution for this.
    Regards
    Bikash

    Hi Bikash,
          Create a predefined filter in the Universe. The edit the date object by changing the LOV SQL, ordering it on the date field. Now click on the option 'Export with Universe" in the propereties tab and the export the universe.
      Hope it should wok.
    Thanks and Regards
    Ram
    09038887788.

  • Need to clear last selected prompt values while refreshing webi report

    While using ALL within cascading prompts its  still showing the last prompt values selected  in infoview and not while editing and trying to run webi reports.
    Is there any way to clear this?
    I have implemented following options to resolve but did not work
    1) Delete the .lov files of universe.                                                                               
    2) Delete the contents in data folder by going into storage directory
    3) Implemented the non_persistent concept in prompts
    Code is as follows for the filter with in universe
    @Select(Customised LOV\State) = @Prompt('Select State','A','Customised LOV\State',mono,free,Not_Persistent,,)
    or
    'ALL' = @Prompt('Select State','A','Customised LOV\State',mono,free,Not_Persistent,,)

    Hi,
    In Web Intelligence, the Query Filter Condition consists of 3 parts:
    - Object on which condition is applied
    - Operator (=,<,>,matches pattern, etc)
    - Operands (constant, LIst of Values, etc)
    You will find a button with a "?" sign which is also called as Prompt properties. When you click on this button, a new window will open and in this you have an option for "Keep last values selected" which is checked by default.
    Uncheck this check box --> Click OK. Run the report and save --> Relaunch InfoView to avoid any caching problems.
    Hope this works for you
    Sheeba

  • Q: SAP BI Hierarchy look in WebI report

    Hi Experts,
    I am trying to create a WebI report displaying a hierarhcy and some measures. I wonder if there is any way to get the report to look more like a classic SAP report displaying hiearchies?
    Something like the following example:
    1) First view of the report:
    Hier. Level 1:  $300
    2) Choose to drill down to next level:
    Hier. Level 1 - Hier Level 2: $100
    Hier. Level 1 - Hier Level 2: $200
    Currently if I make a report with the design in 1 above and drill down; "Hier. Level 1" will be exchanged with "Hier. Level 2" and no longer displayed. I still want to see the top level of the hierarchy after the drill down.
    Thank you in advance for any suggestions,
    Best regards,
    Mikael

    Hi Amr,
    Thank you for your response. I have read the post and the manual, but the problem is not to define the drill down, the problem is to get the result displayed as I want.
    Currently;
    We have:
    Hier. Level 1: $300
    and drill down we get:
    Hier Level 2: $100
    Hier Level 2: $200
    I want:
    We have:
    Hier. Level 1: $300
    and drill down we get:
    Hier. Level 1 - Hier Level 2: $100
    Hier. Level 1 - Hier Level 2: $200
    or:
    We have:
    Hier. Level 1: $300
    and drill down we get:
    Hier. Level 1
         - Hier Level 2: $100
         - Hier Level 2: $200
    Any other ideas?
    Best regards,
    Mikael

  • Displaying Prompt values in webi report

    Hi,
    How to display prompt value in my webi report.
    For one prompt value I can user Userresponse function.
    In one of my report, I have a prompt for Date, which also should be displayed in the report under one field. I am using the below formula: =UserResponse("Enter Date:")
    But my new requirement is User wants a Date Range for a particual trasaction date. I created a report level prompt like
    Transaction Date Between "Enter Tran Date(Start):" and "Enter Tran Date(End):"
    I need to display the start date and end date user selected under one field Date in my webi report.
    how should I do that.
    Please share your thoughts.
    Thanks,
    Ven Men

    Hi Ven,
    You have created a report level prompt like
    Transaction Date Between "Enter Tran Date(Start):" and "Enter Tran Date(End):"
    1.Drag two blank cell on report.
    2.click on one blank cell and on formula editor type following formula.
    =UserResponse("Enter Tran Date(Start):" )
    This will show you start date in the cell.
    3.Similarly in another cell type the following formula
    =UserResponse("Enter Tran Date(End):" )
    This will show you End Date in respective cell.
    Do revert in case of any queries.
    Thanks,
    Sandeep B. Singh

  • Open a webi report from a Dashboard components

    Hi All,
    I have created a dashboard using Dashboards 4.0.It has a bar chart,line chart,combination chart.all these chart on X-Axis have month names as dimensions and y - axis shows different measures.
    So now the requirement is the user wants to select any month from any one of the chart at one particular point of time.then the dashboard should open a Detailed Webi report( created in BI Launch pad) for the selected month and display that month data in a new window.
    I know that we have to use the URL button in Dashboards for linking a webi document.
    However i would like to know how to pass the selected month from the dashboard by selecting a particular month from any of the graph component as a parameter to the respective Webi report in BI Launch pad.
    Hence any body how to implement this in Dashboards please let me know the step by step process.
    Thanking you,
    Regards,
    Naga Nanda Kishore.

    Hi Kishore,
                Month name should be prompt for the Detail  Webi Report, so when u clicked on bar its going to carry that Month as Well. And Syntax for adding Month will be like below.
    Suppose if it is Sample Open Doc:
    /BOE/OpenDocument/opendoc/openDocument.jsp?sIDType=CUID&iDocID=Fq0JoFNoywYADK0AAADHRQkAABVdEABC
    So u have to use this Syntax for Month
    lsSMonth=+ Map the Cell where month is capturing. (Note:In  lsSMonth Month is next of Prompt for month in Detailed Report.
    And final URL will be
    "/BOE/OpenDocument/opendoc/openDocument.jsp?mistype=CUID&iDocID=Fq0JoFNoywYADK0AAADHRQkAABVdEABC&lsSMonth=+Selected Month"
           (Open Doc)                                                                                                                                                          (Sending         (Selected                                                                                                                                                                                       Month)                 Month)
    And For trigger the URL button you have keep trigger URL when Month Value changes(Based on Selection), means you have map trigger cell to destination of Bar chart Month Destination.
    Thanks and Regards
    Sateesh

  • How to combine the same variables from 2 queries in one webi report

    HI ALL,
    I created two BW queries/universe and put them into one web intelligence report. Both queries have the same mandatory variable. I combined the relevant dimensions but can't find how to combine the two variables, which resulted in pop-up for 2 variables.
    Any idea?

    Hey Dick Zheng,
    Just to close it,
    Instead of working on existing reports.
    Create new report(s) on top of these changed Universes(2).
    1. New WebI report on top of Univ1 (With Prompt)
    2. New WebI report on top of Univ2 (Without Prompt)
    If both are working as expected. Do follow below:
    1. Open any Report (just created in above steps)
    2. Edit Query
    3. Add Query
    4. Select another Universe
    5. Drag few objects
    6. Run Queries
    Now see it is working as expected or not.??
    Still any issues post here...,,
    Gracias...!!

  • Dynamic schedulling of WEBI report

    Hi,
    I have created a WEBI report based on BICS connection.
    Report has a date parameter and when scheduling the report in BI 4.0 Server based on daily, monthly and weekly I want to change the value of parameters dynamically.
    How top acheive this?
    Environment details:
    BI 4.0 Support Pack 8 patch 4
    SAP GUI 7.3
    Thanks!
    Nrupal

    From where do you want to pass a value dynamically?  
    Dynamically doesn't mean random right? I should hold some logic receive from..
    What I can think of is :
    Pass a prompt value from another Webi report  and schedule your original report based on event after executing your webi report which is passing the value.

  • SAP BusinessObject Mobile WebI Report Prompt Issue

    Hi,
    I have problem to view the Prompt value in Long Text for WebI report in my iPad. The SAP BusinessObject Mobile application is on version 5.1.12.
    We are using BI Platform 4.1, and the WebI report is connected to Bex Query using BICS connection.
    Below are the settings that I had done:
    Setting of Characteristic in BW:
    Setting of Characteristic – ZBPARTNER in BEx Query Designer:
    Below are the report Prompt result in BI LaunchPad and BI Mobile:
    Example data:
    Business Partner ID 123 has description in Long Text (DO NOT USE - KOC ALLIANZ SIGORTA A.S) and Short Text (DO NOT USE - KOC).
    Business Partner (on top of ZBPARTNER) in WebI is showing Long Text as expected.
    For example, you can see the long text "DO NOT USE - KOC ALLIANZ SIGORTA A.S".
    Business Partner (on top of ZBPARTNER) in Mobile Apps is showing Short Text:
    For example, you can see the long text "DO NOT USE - KOC".
    I need the Prompt value is the BusinessObject Mobile to be display with Long Text, but I cannot find any configuration to achieve this.
    Is anyone encounter similar issue and can provide me some suggestion?
    Thank you in advance.
    Regards,
    Edison Wang

    Hi,
    Just like to follow up whether is there anyone encounter similar issue like above which can give me some advise?
    Thank you.
    Regards,
    Edison Wang

  • WebI report based on Universe upon SAP BEx Queries:Prompt issue

    Hi,
      I am creating Web Intelligence report using Universe based on SAP Bex Queries. In WebI report I created a filter condition as I need to run report based on two specidc dates. I need to schedule report to run 2nd of every month to show data for last month. At present I have the following filter : date between 'Start Date' and 'End Date'. 'Start Date' should always be 'first date of previous month' and End Date be always must be 'Last date of previous Month'. How to do this. The solution I thought would be to create  variables at report/universe level ('first date of previous month' and 'Last date of previous Month') and use in the filter using 'Object from this Query' option.But this 'Object from this Query' option is missing in the prompt.Is there any work around to achieve this.? Could you please help me.
    Nanda Kishore

    Hi all,
    I have a related question too.
    I have 2 queries and need a Combined BEx query written on this for reporting. (WebI)
    In the 2 queries, there is a Field which needs to be restricted.
    But this field should not be restricted in the Combined BEx query.
    So I thought of restricting the Field at the report level. But in this case, the user gets a prompt to enter a value for the field.
    And this is not desirable as per the requirement.
    COuld you please tell me if there is another way of handling this without the user being prompted to enter a value while the report is being run, but still I need selection at the Field level.
    Thanks and Regards,
    Srilakshmi B

  • BW Hierarchy not coming up in my WEBI report

    Hi Gurus,
    I have created BW query with only 2 fields 1) 0PROJECT 2) 0WBS Element and a key fig 'No of records'. I activated the hierarchy on 0WBS. Then created universe on this query. WBS hier has 6 levels so i in universe, I got 6 dimensions with L00, L01...L06  and created my Webi report with following fields.
    1) Project (dimension)
    2) WBS L00 Dimension
    3) WBS L01 Dimension
    4) WBS L02 Dimension
    5) WBS L03 Dimension
    6) No of records - key fig
    If I take only Project field and No of records, I can see no of rec with values. But when i executed the report with  all WBS hier dimensions like L00, L01,.... i can see only project column is populated and all WBS  L00, L01...etc and No of rec key fig are not populated at all.
    I am new to this so am i missing anything here? We just now installed BO XI 3.1 SP3. May be some files are missing in installation?
    Regards,
    Rahul.

    >
    SAPBW 2006 wrote:
    > Hi Gurus,
    >
    > I have created BW query with only 2 fields 1) 0PROJECT 2) 0WBS Element and a key fig 'No of records'. I activated the hierarchy on 0WBS. Then created universe on this query. WBS hier has 6 levels so i in universe, I got 6 dimensions with L00, L01...L06  and created my Webi report with following fields.
    >
    > 1) Project (dimension)
    > 2) WBS L00 Dimension
    > 3) WBS L01 Dimension
    > 4) WBS L02 Dimension
    > 5) WBS L03 Dimension
    >
    > 6) No of records - key fig
    >
    > If I take only Project field and No of records, I can see no of rec with values. But when i executed the report with  all WBS hier dimensions like L00, L01,.... i can see only project column is populated and all WBS  L00, L01...etc and No of rec key fig are not populated at all.
    >
    > I am new to this so am i missing anything here? We just now installed BO XI 3.1 SP3. May be some files are missing in installation?
    >
    > Regards,
    > Rahul.
    Here there are two ways to get out this (there's no problem with u r installation)
    *1) if u are using webintelligence in bo , make sure that drill option(on top) to be enabled,*
    *2) in universe, select the key figure (No of records) rightclick * No:ofrecords* -> object properties -> Properties  tab Check Function is assigned to sum, if the option Database delegated is there just change that to sum. and apply, save and export the universe and check again
    Regards,
    Naveen kumar

  • BO Webi report hierarchy with measure values showing more(almost double value) compare to BW Bex report

    Hi,
    In our BO Webi report hierarchy with measure values showing more(almost double value) compare to BW Bex report. Can any one please help on this.
    Is it BW problem or BO problem?
    I checked in some other threads but it's not given solution.
    Thanks,
    Manjunatha

    Hi,
    Is it BW problem or BO problem? : BO
    is it causing problem with hierarchly data only ?  without hierarchies data is matching or not?
    Post same in SAP BusinessObjects Web Intelligence  .
    Thanks.

  • BW Hierarchy in WebI report: strange behaviour

    Hi experts,
    I faced with an (apparently) strange WebI behaviour.
    I'm working with SAP BW 7.0 and BO XI 3.1 SP 2.
    I have a universe built on a BEx query and the BEx query is built on a multiprovider (with 2 infoCubes inside).
    The universe maps a BW hierarchy (ex. H) along with other object (ex. A and B).
    In WebI report all works fine if I got only hierarchy levels (in drill mode) and a measure.
    Adding the A characteristic, A values seems to be mapped in the hierarchy characteristic while A values are empty.
    Adding the B characteristic, both B and H are empty.
    Removing hierarchy objects from the report, A and measure works fine.
    B and measure works fine.
    BEx query works fine.
    Does anyone has ever faced with this kind of problem?
    Any help would be appreciated
    thanks in advance
    marco

    Hi,
    There is a mechanism called "flattening" which transposes OLAP DataSet into an XML stream 'rowset' - this is part of the MDX interface of BW, and is most problematic.
    the ultimate proof is to enable the MDA.log , capture the MDX SELECT statement, and Executing it in transaction MDXTEST in BW. There are 3 execution modes: multidim, flattening, xml -  there has to be exact parity in the ouput between the 3 modes, otherwise you have a problem
    You'll probably find that the query syntax Runs correctly, but perhaps the data problem is also seen in the BW back-end ?
    Please check SAP Note 1446246 - MDX: Composite SAP Note for flattening API based on basXML
    and ensure that you have the Related Corrections implemented
    Regards,
    Henry

Maybe you are looking for