SSRS Drill through report - Text Box Properties, Action - Go to Report

Apologies for the potentially very basic nature of my question, I am fairly new to using SSRS (using SQL Express 2014) and struggling with creating a drill through report using other reports. Where the problem is, is when I go to the Text Box
Properties - Action - Go To Report. Where it says to specify a report, I click on Browse and it only allows me to look in 'Recent Sites and Servers' - I therefore cannot navigate to where my other report that I wish to link is stored. What am I
missing? Any suggestions appreciated. Thank you

If you dont have the report to which you need to navigate within the same project, you should be using jump to URL option and specify full report server url of the second report with only parameter part replaced by the actual field from which you need to
pass the value
Another way is to create a linked report for the report to which you need to navigate within the same project as your first report and then use jump to report option to include the linked report along with its parameters and corresponding values.
http://www.mssqltips.com/sqlservertip/2308/sql-server-reporting-services-linked-reports-example/
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Similar Messages

Convert seconds to [h]:mm:ss format on report text box

I want to convert seconds to hh:mm:ss format on the report text box.
I use =Format(Sum([MyTime])/(24*60*60),"hh:nn:ss"), but it does not work if the hours more than 24 hours, since the format is for the time format for the day.
I need the result shows more than 24 hours, because I want to show how many hours and minutes from my seconds value.
I can use [h]:mm:ss for Excel that it gives me the total hours more than 24 hours.
I tried to use the following to my text box
Int((sum(MyTime)) / 3600) & Format(Int((sum(MyTime) / 60) Mod 60, "\:00") & Format(sum(MyTime) Mod 60, "\:00"),
but for some reason it only shows seconds part without minute and hour part of the value.
Your help and information is great appreciated,
Regards,
Souris,

I want to convert seconds to hh:mm:ss format on the report text box.
I use =Format(Sum([MyTime])/(24*60*60),"hh:nn:ss"), but it does not work if the hours more than 24 hours, since the format is for the time format for the day.
I need the result shows more than 24 hours, because I want to show how many hours and minutes from my seconds value.
Hi sourises,
You can use the next function. Place it in a general module.
Function Sec_to_str(seconds)
Dim uur As Integer
Dim min As Integer
Dim sec As Integer
Dim cur_sec As Variant
cur_sec = seconds
If (IsNull(cur_sec)) Then
Sec_to_str = Null
Else
sec = cur_sec Mod 60
cur_sec = cur_sec \ 60
min = cur_sec Mod 60
cur_sec = cur_sec \ 60
uur = cur_sec
If (uur = 0) Then
Sec_to_str = Format(min, "#0") & ":" & Format(sec, "00")
Else
Sec_to_str = Format(uur, "#0") & ":" & Format(min, "00") & ":" & Format(sec, "00")
End If
End If
End Function
Imb.

How to change the font size of Text Box Properties Appearance tab into 2 decimal digit.

How to change the font size of Text Box Properties Appearance tab into 2 decimal digit. I am uanble to modify it to 5.38 pt for example. Its only allowing to 1 decimal place.

Click on each field and the choose Properties from either File menu (or if on Mac hold dow mouse button until context menu appears choose properties)
go to Font
choose desired size and type font,you can choose to make this the default.
Do this with each field.
Or if you have a lot of fields:
while one is selected select all of them
then go to fonts in properties
change Font and size and make default.

Acrobat Pro 6.0 - Text Box Properties: How-to change font / default

Inserting text box into an existing .pdf opened in Acrobat Pro ver. 6.0
Need to change font size to smallest. Right-clicking on field to open 'properties', clicking on 'Appearance' tab, BUT there is no choice for 'font'.
HOW DO I...change the font size in a text box?
HOW DO I...set the default to that font/size/color/border/fill?

You need to have the Properties Bar open (Ctrl + E), double-click on the text so you can select some of it, and you should see where you can specify the various font properties.
George

How to change default text properties and text box properties

I'm adding text to a PDF document by using the text box tool. The default is to put a border around the box and also the font is red and larger than I'd like. I think I found how to change the default box properties (so it has no boarder).
For the text/font, I can pull up a menu to change the font properties, but so far I'm having to do this for each box I create. One workaround is to cut and paste new text boxes with the formatting I want, but I still want to know how can I set the defaults to the font, size and color of text I want?
I'm using AA 8 Professional
Best, David

This is one of Acrobat's less intuitive areas!
For defaults, right-click on the text box that is as you want it: then select menu item 'Make current properties default'
Use Ctrl-E to bring up the Properties toolbar: its content will change depending on whether you have the box or the text selected, and selecting the box or text can be a bit clunky.
Steve.

What happened to Ctl-E and text box properties?

Since installing Acrobaat X PRO, I can't format my text boxes, borders, fill or change fonts or add BOLD.

Be sure you are using the text edit tool or whatever the new name is. You should also be able to select the text and right click to get the properties.

Passing different (multi-) values for parameters to drill-through report, based on clicked subtotal in main report

In Report Builder 3.0, I have made a main report in which the user can filter the underlying dataset using three parameters (all multi-value). The report shows totals grouped by these three parameters, as well as a grand total. What I want is to click
on a total, which then opens the drill-through report for the corresponding records. I have achieved this for the grand total; the action in the corresponding text box passes all selected values of the parameters to the drill-through report.
What I cannot figure out is how to make this work right when clicking on a subtotal. When I use the same expression as for the grand total, the same values for the parameters are passed, instead of the subset that apply to the corresponding text box in the
main report. I expected this to work, because Report Builder /does/ correctly calculate the SUMs for the different levels, even though the expressions are the same.
My question is: how do I pass different drill-through (multi-) values for parameters, corresponding to the respective subtotals in the main report?
(FYI: I am using Microsoft SQL Server 2008 R2 and Report Builder 3.0 .)

Hello Katherine,
Thanks once more for your quick reply.
I was aware of the textbox action "Go to report", and how to pass parameters in general. My question concerned how to determine the scope of the passed multi-value parameters (to the values that apply to the respective group/subtotal). The article you linked
to is informative, but not a solution to my problem.
A colleague of mine came up with a pragmatic solution: instead of trying to determine the scope of the parameter values, now I "look to the left in the results table". The two screenshots below should illustrate this. (Screenshots are in Dutch. Specific information
is pixelated.)
Unfortunately, I am not able to post images. Once my account is verified, I will edit them in. For now, I hope the text speaks for itself enough.
[Screenshot: Drill-through parameters - 01: Report Builder tablix with subtotals]
[Screenshot: Drill-through parameters - 02: Textbox properties (selected in screenshot 01) - Action - Go to report]
The first screenshot shows the tablix in the Report Builder. The second screenshot shows the properties of the textbox selected in the first.
Notice that I do not pass parameters for the first two columns, but the actual values. I only pass the parameter (containing /all/ user-selected values) for the third column. In the textbox below the selected one, I pass the actual values for the first column,
and parameters for the last two. In the textbox above the selected one, I pass the actual values for all three columns.
The only (cosmetic) flaw this approach has is that in the drill-through report, the list of selected parameters might show values that do not occur in the (corresponding part of the) results, and only for those parameters for which the main report passes (all
user-selected) parameter values, and not the actual values in the results. The results are correct, though.
If there is a way to directly determine the scope of multi-value parameters for passing to a drill-through report, I would still like know. But for now, this seems to work.

How to display the drill through report in a new browser seperate window

Hello All,
I am working on a drill through report which should run when I select the column value from the main report. The drill through report I am working on is Centerline Validate Angles for a specific line. It has 2 parameters, Pods ID and Angle. Main report supplies
these 2 values. Right now, I am having an issue in displaying the drill through report in a seperate window. I have selected Go To URL option from the text box properties in main report and gave the expression as
="javascript:void(window.open('http://vmaidbdev1/Reportserver?%2fADN2%2fPipeline%2fCenterline+Validate+Angles+For+Specifi+Line&rs%3aCommand=Render&PODS_ID="&Fields!LINE_ID.Value &"&Angle="&Parameters!Angle.Value
This is not working. The field in the main report is clickable but when I click it is throwing me error as Reporting services error. Could any one let me know if there is any error in the above expression or anything I need to add or correct.
Please help. Thanks so much.

Hi srisql,
Sorry for the delay in getting back to you.
After double-check the URL which I posted, I find that I have made some error in it. As you can see, there are some spaces in the URL. So please try the following expressions to check the issue again.
Angle parameter is a multi-value parameter:
="javascript:void(window.open('http://vmaidbdev1/reportserver?/Adn2/Pipeline/Centerline Validate Angles for a specific line&PODS_ID="& Fields!LINE_ID.Value &"&Angle="
&Join(Parameters!Angle.Value,"& Angle =") &"','_blank'))"
Angle parameter is a single-value parameter:
="javascript:void(window.open('http://vmaidbdev1/reportserver?/Adn2/Pipeline/Centerline Validate Angles for a specific line&PODS_ID="&Fields!LINE_ID.Value &"&Angle="&Parameters!Angle.Value
&"','_blank'))"
The following general URL is for your reference:
="javascript:void(window.open('http://server_name/reportserver?/folder/ folder/report_name&parameter_name="&Fields!field_name.Value &"&parameter_name="&Parameters!parameter_name.Value
&"','_blank'))"
If you have any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

EIS and Drill Through Report Video

Hello,
If you want to learn Essbase Integration Service and Drill through report features, here is the videos tutorial of 2 hours.
EIS & Drill through : http://www.box.net/shared/qlj6ba8gf3
Amit
learnhyperion.wordpress.com

Hi,
I could not play the movie. Which player is suitable to run the movie?
Thanks in advance

Drill Through in EIS

I am having an issue with EIS metaoutline. Below is my scenario,
We have a metaoutline for drillthrough from ASO cube with multiple hierarchies enabled. So by default the dimension becomes 'Label Only' and the dimension data value is inherited from the first member under the dimension. So when the cube retrieval is done the value of the dimension is displayed as the value of its first child but when a drill through report is launched at the dimension level the result is the sum of all the members under the dimension. I have the dimension marked as label only in metaoutline and changed the consolidation for only the first rollup as '+' whereas others as '~' but still for some reason the drill through SQL is considering everything. Is there anything I am missing on this design which I am not aware of or is it a known issue in EIS?

I haven't used EIS for a while, but I would be surprised if drill-through cares about consolidation properties. You might be able to work around it by using custom SQL with a CASE condition on the top-level member.
That said (not sure which version you're on), the 9.3.3 release notes for EIS (http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/eis_93300_readme.pdf) state: "When working with drill-through reports for alternate hierarchies, you must create a separate drill-through report for each hierarchy."

Missing text in Text box

Hello,
please, I have a strange error in text box located in heading of Report. Namely, while in Report Builder Report Preview, everything is correctly presented but, if I click Page Layout button, suddenly text is missing? The same error is if Report is exported
to .PDF file!
Like curiosity, there is one more text box in the same location (Heading) that is behaving correctly!
I can not notice any differences among them while looking into properties....
Any idea how to investigate ?
Thanks for any advice...

Hi daredavil3011,
According to your description, your are creating some textboxes in the page header area, everything works fine when previewing the report. However, when you click the Print Layout button or export to a PDF file, the text within one textbox is missing, right?
Regarding the issue, I would like to know the exact position of the textbox in the page header area. In your scenario, please double check and make sure all properties of the textbox are the same as other one. Besides, I Would suggest you redesign those textboxes
in the page header area. If issue persists, please provide the report design for our analysis. If possible, please share some screenshots about print layout and PDF render results.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

InfoPath 2013 - Rich Text box - Expand to show all text option not working

I have create an InfoPath form and created a view which will be used for printing. I have a rich text box in this print view and the scroll option for this rich text box is set to "Expand to show all text". However, it is not working and it doesn't
expand the size of the text box based on the content length.
same thing used to work in InfoPath 2010.
Any suggestions?
Thanks,
Neelesh

Hi Wendy,
Here are the steps I have used:
1. On default view added a rich text box.
2. Created another view called Print and mapped it to the same Field which I added to default view
3. Set the Wrap text and Expand to show all text on both the Rich Text Box Properties - in default view and in Print
view. Also set the height of the rich text box to auto.
4. Set the print views as the print view for default view
5. Deployed the form to SharePoint Form Library
6. Opened the form in browser
7. Entered the content in the rich text box in default view. It expands well if I have much content
8. Clicked on Print preview and that opens up the print preview and it shows the rich text box only one line in height and with scroll bar
I missed to mention that it is a web browser enabled form and I am using InfoPath 2013 and SP 2013.
It does work fine in InfoPath client.
Thanks.

Edit more than one text box at a time?

I find it extremley irritating having to go through every text box changing each line, for example when you make a business card is it possible to change all the text boxs at the same time?

Yes you can drag a VCard from your AddressBook or a *Numbers Spreadsheet* on to the page and it will automatically populate the entries if they are set up to merge, which most of the templates are.
If you drag a Group from AddressBook it will create as many pages of Business Cards as there are entries in the Group, one per page.
Be aware there are 2 types of merges, one for *Your details* +Sender Field+ (obtained from your personal details in the Address Book) and one for *Others details* +Merge Field+ inserted from:
+Menu > Insert > Merge Field / Sender Field+
The business card templates are constructed for +Sender Fields+, delete each entry and replace with the appropriate *Merge Fields*.
see p242 *Defining Your Own Merge Fields* Pages09_UserGuide.pdf downloadable from under the Help menu.

How do I get rid of various lines around text boxes when using navigation panes

How can I get rid of these various lines that are displaying sporatically around different text boxes . . . but only when the navigation panel is displaying? I previously had the issue and changed the text box properties to no fill. It fixed the problem in the document with no navigation panel, but once the navigation panel is displayed the lines appear. And yes, I fixed the text box properties before creating the bookmarks for the navigation panel.

Every device, browser and browser version has its idiosyncrasies.
Just using a stroke and a drop shadow should not have been enough to require Muse to convert the page fill to an image. Were/are there also other effects on the page? Are the page corners slightly rounded?
Bevel and Inner Glow definitely require an image to be created. Most other effects/properties do not.

How can I find a text box with a specific word in it ?

Hi,
I have hundreds of settlement names on a map created with the text tool. How can I search on the name of one of them and find it on my map ?
I am with FH9 but the method would no doubt be backwards compatible from MX. If it isnt I would launch MX just for this exercise.
Would this also work if the word was part of a text box text ?
I have the luxury of it being the entire text box !
Cheers
Envirographics

If you have one large text box to search for the word, select it, then go to EDIT>FIND & REPLACE>TEXT...
Type in your word and click FIND NEXT button. If you have multiple occurances of the name, keep clicking the FIND NEXT button until the word hilites.
If you have scattered text boxes on your map, don't select any of them but still go through the EDIT>FIND & REPLACE>TEXT... routine I mentioned. FreeHand will look through all text boxes to find your word.
Oh yeah, this works the same in FreeHand 8 thru FHMX.

SSRS Drill through report - Text Box Properties, Action - Go to Report

Similar Messages

Maybe you are looking for