Prompted for more than one password when updating/buying apps
My wife and I both have iPhones synced to iTunes on one laptop. As such we both sync/back-up our phones to a single library.
When we update/buy apps we are sometimes prompted to enter each others passwords when using our own phones? That is I am asked to enter her password when I am using my phone and she is promoted to enter mine when using here phone. How do we avoid this?
Thanks
I've seen this happen for myself and my partner's iPhone too. I came to the same conclusion - the apps I'd "purchased" (even free apps are classified as purchased in iTunes) on my iPhone got pushed to my partner's phone when she connected it to the same iTunes instance.
Apple suggest a few different methods for managing two iPhones on one machine here:
http://support.apple.com/kb/HT1495
In general, they suggest keeping the iTunes libraries separate. There's also a link to another article which explains about sharing music between more than one library.
Similar Messages
-
G5 idle for more than one hour
when i leave my G5 idle for more than one hour, when i enter my password, the system locks. i have to shut off the computer and turn it on again...
Try restoring the iPod to factory settings/new iPod.
If still problem then I would make an appointment at the Genius Bar of an Apple store and hear what they have to say.
If a bad battery:
Apple will replace it for $79
A third-party place is less expensive. Here is one:
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace it yourself.
iPod Touch Repair – iFixit -
My phone has been plugged in to my computer for more than one hour and the status bar only shows about less than 1/4 completed. I have an iphone 5s btw.
Depends on how strong your wifi connection is.
you can try a reset hold down the home/sleep button together until you see the apple logo and then release. -
[Fwd: Client accessing MBeanHome for more than one domain receives SecurityException]
Fwd'ing to security newsgroup
-------- Original Message --------
Subject: Client accessing MBeanHome for more than one domain receives
SecurityException
Date: 4 Mar 2004 07:27:33 -0800
From: Dinesh Bhat <[email protected]>
Reply-To: Dinesh Bhat <[email protected]>
Organization: BEA NEWS SITE
Newsgroups: weblogic.developer.interest.management
Hi,
When a client accesses MBeans of more than one domains (Weblogic 8.1)
that have
different passwords, it receives a SecurityException. This occurs when
the MBeanHome
for each domain is looked up at initialization and reused for each
request ( to
access MBeans ). The security exception does not occur if the MBeanHome
for each
domain is looked up for each request. On initial review, this behavoir
seems inconsistent.
Looking up the MBeanHome for each request may introduce a significant
overhead.
I am not sure if concurrent lookups would also cause the same problem.
I have read on another post that we can work around this problem by
establishing
a trust relationship between the servers, but this may not be feasible
when one
is monitoring a lot of servers and the overhead of configuration may be
an issue.
I have attached code that can reproduce the problem.
Please advise on the correct approach.
Thanks
Dinesh Bhat
Panacya Inc.
import java.util.ArrayList;
import java.util.Set;
import java.util.HashMap;
import java.util.Iterator;
import java.util.Hashtable;
import javax.management.MBeanServer;
import javax.naming.Context;
import weblogic.jndi.Environment;
import weblogic.management.MBeanHome;
* This class reproduces the Security Exception that is caused when a client tries to access
* MBeans of more than one domain with different weblogic passwords. Here is the stacktrace of the
* exception
* java.lang.SecurityException: [Security:090398]Invalid Subject: principals=[weblogic, Administrators]
at weblogic.rjvm.BasicOutboundRequest.sendReceive(BasicOutboundRequest.java:108)
at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:138)
at weblogic.management.internal.AdminMBeanHomeImpl_811_WLStub.getDomainName(Unknown Source)
at WLSecurityTest.getWeblogicInfo(WLSecurityTest.java:140)
at WLSecurityTest.runTest(WLSecurityTest.java:75)
at WLSecurityTest.<init>(WLSecurityTest.java:66)
at WLSecurityTest.main(WLSecurityTest.java:51)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.intellij.rt.execution.application.AppMain.main(Unknown Source)
Caused by: java.lang.SecurityException: [Security:090398]Invalid Subject: principals=[weblogic, Administrators]
at weblogic.security.service.SecurityServiceManager.seal(SecurityServiceManager.java:682)
at weblogic.rjvm.MsgAbbrevInputStream.getSubject(MsgAbbrevInputStream.java:181)
at weblogic.rmi.internal.BasicServerRef.acceptRequest(BasicServerRef.java:814)
at weblogic.rmi.internal.BasicServerRef.dispatch(BasicServerRef.java:299)
at weblogic.rjvm.RJVMImpl.dispatchRequest(RJVMImpl.java:920)
at weblogic.rjvm.RJVMImpl.dispatch(RJVMImpl.java:841)
at weblogic.rjvm.ConnectionManagerServer.handleRJVM(ConnectionManagerServer.java:222)
at weblogic.rjvm.ConnectionManager.dispatch(ConnectionManager.java:794)
at weblogic.rjvm.t3.T3JVMConnection.dispatch(T3JVMConnection.java:570)
at weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java:105)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:32)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
* Note: the exception is caused only when the MBeanHome for each domain is cached and used for subsequent
* transactions. The exception does not occur if the MBeanHome for each domain is looked up for each transaction. This
* would significant overhead in practice. Also the transactions across the various domains occurs serially, hence
* the effect of concurrent lookups has to be tested.
* Usage:
* This class has been tested with weblogic 8.1
* The class needs weblogic.jar in its classpath
* One can specify the weblogic details as System properties. The properties need to be specified in
* the following format:
* wls.host.n, wls.userId.n, wls.password.n where n is the weblogix instance number. Also specify
* the boolean system property reconnect.each.iteration to toggle between reconnecting or not reconnecting
* for each iteration. When not reconnecting for each iteration, the MBeanHome is reused and the Security Exception
* occurs.
* Following is the example of system properties
* -Dwls.host.0=localhost:7001 -Dwls.userId.0=weblogic -Dwls.password.0=weblogic
* -Dwls.host.1=localhost:7011 -Dwls.userId.1=weblogic -Dwls.password.1=weblogic1
* -Dwls.host.2=localhost:7021 -Dwls.userId.2=weblogic -Dwls.password.2=weblogic2
* -Dreconnect.each.iteration=false
public class WLSecurityTest
ArrayList wlsDetailsList = new ArrayList();
HashMap connectionMap = new HashMap();
public static void main(String[] args)
try
WLSecurityTest wlSecurityTest = new WLSecurityTest();
catch (Exception e)
e.printStackTrace();
* Constructor
* @throws Exception
public WLSecurityTest() throws Exception
int noOfTries = 10;
getWLSDetails();
for( int i=0; i <= noOfTries; i++)
runTest();
* Runs the test
private void runTest()
for (int i = 0; i < wlsDetailsList.size(); i++)
WLSDetails wlsDetails = (WLSDetails) wlsDetailsList.get(i);
getWeblogicInfo(wlsDetails);
* Get Weblogic details from System properties
* @throws Exception
private void getWLSDetails() throws Exception
wlsDetailsList = new ArrayList();
String hostKeyTmpl = "wls.host";
String userIdKeyTmpl = "wls.userId";
String passwordKeyTmpl = "wls.password";
boolean done = false;
for (int i = 0; !done; i++)
WLSDetails wlsDetails = new WLSDetails();
String hostKey = hostKeyTmpl + "." + Integer.toString(i);
String userIdKey = userIdKeyTmpl + "." + Integer.toString(i);
String passwordKey = passwordKeyTmpl + "." + Integer.toString(i);
wlsDetails.hostName = System.getProperty(hostKey);
done = (wlsDetails.hostName == null) || (wlsDetails.hostName.length() == 0);
if (!done)
wlsDetails.userId = System.getProperty(userIdKey);
wlsDetails.password = System.getProperty(passwordKey);
connect(wlsDetails);
wlsDetailsList.add(wlsDetails);
* Lookup the MBeanHome for the specified weblogic server
* @param wlsDetails
* @throws Exception
public synchronized void connect(WLSecurityTest.WLSDetails wlsDetails) throws Exception
Context ctx = null;
MBeanHome mbHomeLocal = null;
try
Environment env = new Environment();
env.setProviderUrl("t3://" + wlsDetails.hostName);
env.setSecurityPrincipal(wlsDetails.userId);
env.setSecurityCredentials(wlsDetails.password);
Hashtable hashtable = env.getProperties();
System.out.println(hashtable.toString());
ctx = env.getInitialContext();
wlsDetails._mBeanHome = (MBeanHome) ctx.lookup(MBeanHome.ADMIN_JNDI_NAME);
catch (Exception e)
e.printStackTrace();
* Gets weblogic information using MBeans
* @param wlsDetails
public synchronized void getWeblogicInfo(WLSDetails wlsDetails)
try
boolean reconnectEachIteration =
Boolean.getBoolean("reconnect.each.iteration");
if( (reconnectEachIteration) || ((wlsDetails._mBeanHome == null) && (!reconnectEachIteration) ))
connect(wlsDetails);
MBeanHome mbHomeLocal = wlsDetails._mBeanHome;
String domainName = mbHomeLocal.getDomainName();
Set allMBeans = mbHomeLocal.getAllMBeans();
System.out.println("Size: " + allMBeans.size());
Set clusterMBeans = mbHomeLocal.getMBeansByType("Cluster", domainName);
System.out.println(clusterMBeans);
MBeanServer mBeanServer = mbHomeLocal.getMBeanServer();
catch (Exception ex)
ex.printStackTrace();
* Class that holds weblogic server details
class WLSDetails
String hostName = "";
String userId = "";
String password = "";
MBeanHome _mBeanHome = null;If Server version is 61.
Make user "system" password of all weblogic servers same.
If Server version above 61(70,81)
In the Security Advanced Settings un check generated credential and specify a common credentail for all the weblogic servers(domains). -
Editing 'Media Kind' for more than one song.
Team,
After downloading the newest update, I am no longer permitted to edit the "Media Kind" for more than one item at a time. I need to be able to select an entire album at a time in order to efficiently update my library. I sincerely appreciate your help.I am having the same issue. The first song and beat markers work great. I add a second song and set beat markers. When I add photos, the appear at random spots with random lengths. I haven't seen a pattern yet. Spent 30 minutes on this topic at my last 1:1 session in the store. No luck figuring it out.
One work-around might be to create one song per project (so beat markers work), then combine the two (or more) projects. But I'm not sure if that's possible or how to do it.
Thanks for any help on this. -
Trigger for more than One table
Hi,
is it possible to create a trigger for more than one table?
I need a trigger that fires when anyone of the users updates a special value in one of the DB tables.
this value is in about 8 or 10 tables, or must i create a trigger for each table?
thanx
marcelYou would wrap the functionality required into a packaged procedure and then have a trigger on each of these tables that simply call this packaged procedure.
Yes, you would have one trigger per table. -
Master_detail for more than one record at a time
Hi,
How can i display master_detail records for more than one records at a time, for example, i have two tables A and B , A has username and role and B has username and profile. here i wanted to display 10 users at a time on my 6i form with username, role and profile.
i have created a master-detail relation ship with these tables when i'm executing F8 on blcok A , it displays 10 records on BlockA but, only one at a time on block B, how can i display all corresponding records on block B at a time.
Thanks for your help.BcjThanks Roberts, that was realy informative due to some doubts i would like to confirm my requirements , i have two blocks A and B and each master record has only one detail record. but i wanted to display at least 10 master_detail relationships(records) on the form at a time, i would like to know is it possible to do without creating any table or view for example,
data in table A,
username role
AAA R1
BBB R2
CCC R3
data in table B,
username profile
AAA P1
BBB P2
CCC P3
i wanted to display it on form like below,
username role profile
AAA R1 P1
BBB R2 P2
CCC R3 P3
Also would like to know that how can i select data from dba_users, any restriction is there on forms 6i, i can select it on sqlplus.
Thanks Again, Bcj -
Can we use same program ID for more than one RFC scenarios
Hi experts,
I am working on a RFC to FILE scenario. I have created one TCP/IP connection in SM59 with a program ID. Can we use this program ID for more than one scenario. I have written code as below
data: iquote type standard table of ZIQMD initial size 0,
IPRODUCT type standard table of ZPMS initial size 0,
wa_quote type ZIQMD,
wa_PRODUCT type ZPMS.
CALL FUNCTION 'Z_CBT_RFC_QUOTEMASTER'
TABLES
I_QUOTE = iquote .
CALL FUNCTION 'Z_CBT_RFC_QUOTEMASTER' in background task DESTINATION
'ID4'
TABLES
I_QUOTE = iquote .
COMMIT WORK.
CALL FUNCTION 'Z_CBT_RFC_PRODUCTMASTER'
TABLES
IPRODUCT = IPRODUCT .
CALL FUNCTION 'Z_CBT_RFC_PRODUCTMASTER' in background task DESTINATION
'ID4'
TABLES
IPRODUCT = IPRODUCT .
COMMIT WORK.
when i am executing the code like this. i am able to send the data to 'Z_CBT_RFC_QUOTEMASTER' , but iam not getting data for 'Z_CBT_RFC_PRODUCTMASTER' interface. ID4 is the connection that i have created in SM59. with program ID as ABCD.
Can i use the same connection for all interfaces.Please help in this, if we can use same connection for all interfaces. then how to make changes in XI.
Thanks in advance.
Thanks & Regards,
Poorna.Just tried this and I can confirm that my earlier understanding was correct!
One of my colleagues confused me out and the conclusion is,
1. You need a separate TCP IP Connection for every interface with a Unique program ID.
Regards
Bhavesh -
Help me to search on calendar for more than one year
I desparately need to be able to search on calendar for more than one year., which was taken away on the new operating system. I have kept personal memories of my husband on there in the notes sections on days when we did things. ( I have also kept all kinds of personal notes, like doctor records or conversations, in the notes of events/dates.) it is a huge loss for me not to be able to search my calendar for more than one year. Is there any way I can do this?
Jens,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/ -
I have just started using WD external hard drives, I use it to save my movies and music on. On more than one occasion, when I connect it to my MacBook it erases everything I had save on the hard drive. Can someone please help me with this problem? I am super tired of having to put all of my movies and music on the hard drive just to have it erased again. The products I am using are WD 4TB My Book and 2 TB My Passport external hard drives. When it happens, there is always an icon that reads, EFI, along with the My Book icon. Thank you for your assisstance.
dwgar1322 wrote:
I have just started using WD external hard drives, I use it to save my movies and music on. On more than one occasion, when I connect it to my MacBook it erases everything I had save on the hard drive. Can someone please help me with this problem? I am super tired of having to put all of my movies and music on the hard drive just to have it erased again. The products I am using are WD 4TB My Book and 2 TB My Passport external hard drives. When it happens, there is always an icon that reads, EFI, along with the My Book icon. Thank you for your assisstance.
Yes, you have WD software installed REMOVE IT !!
WD has warned its customers about their huge mistake that their software doesnt work on Mavericks and causes data loss.
(also dont use WD drives anymore)
Read all about it here:
https://discussions.apple.com/thread/5475136?start=255&tstart=0
See their website on removing the destructive WD software here:
http://community.wd.com/t5/External-Drives-for-Mac/External-Drives-for-Mac-Exper iencing-Data-Loss-with-Maverick-OS/td-p/613775
Western Digital External Hard Drives Experiencing Data Loss On OS X Mavericks
http://www.cultofmac.com/252826/western-digital-external-hard-drives-experiencin g-data-loss-on-os-x-mavericks/ -
I am trying to copy more or less 30G from my MacbookPro to an external hard drive and it is stuck in the "preparing to copy" step. But that for more than one hour. What should I do to make it faster? Thanks a lot in advance!
Thanks Shootist007, by blockd files I mean files that I have changed to blocked and when I tried to move then for the first time, I had to unblock again. I am trying to backup my pictures, my songs and other files like word documents and excel tables. First I put all of them as blocked, what caused the first problems on trying to move them. Then, I've unchecked the block option and if I try to move one by one, there is no problem. The issue is to move all together, because it gets stuck in the preparing to copy files step. Anyway, if I cannot do all by once, I'll do it one by one, event though that was not suposed to happen if we are talking about technology, right? Anyway, I thank you again for trying to help me!
-
Dynamic Filter SAP HANA - For more than one field
Hi Guys,
Is their any way we can apply filter for more than one field. Lets take below example i want to apply filter both on PERNR & DOJ. I am able to apply filter on PERNR but when i try to create filter on more than one field (PERNR & DOJ ) it throws me some error.
Please let me know how we can achieve this.
OUT_EMP_SAL = SELECT A.PERNR, A.DOJ, A.FNAME, B.SALARY FROM "SAPH74".EMP_INFO A
INNER JOIN "SAPH74".EMP_SAL B
ON A.PERNR = B.PERNR;
OUT_EMP_SAP = APPLY_FILTER(:OUT_EMP_SAL, :IN_PERNR )Hi Lakshmi,
You may need to use the end while calling, i took the same example from the "Help" in hana.
CREATE PROCEDURE GET_PROCEDURE_NAME (IN filter NVARCHAR(100), OUT procedures outtype)
AS
BEGIN
temp_procedures = SELECT SCHEMA_NAME, PROCEDURE_NAME FROM SYS.PROCEDURES;
procedures = APPLY_FILTER(:temp_procedures,:filter);
END;
CALL GET_PROCEDURE_NAME(' SCHEMA_NAME = ''SYS'' AND PROCEDURE_NAME like ''TREX%''', ?);
Regards,
Krishna Tangudu -
Allow for more than ONE item in a single row?
Allow for more than ONE item in a single row? I can't use this wonderful program unless I can get more than one field on a row (i.e. 1st name, mi, last name etc)
Thanks for your feedback. This is something we definetely want to provide next year (can't say when yet).
If others are interested in this feature please vote on it within the idea tab: http://forums.adobe.com/ideas/1046
That helps us prioritize our work based on customer demand.
Randy -
Use of same iTune for more than one iPod
I need to find out whether I can use the same itune in one computer for more than one iPod nano and one iPod video?
I looked at the article, but it doesn't help me know how once I have downloaded onto a nano, for example, the itunes knows that the next thing I connect is something different. My son hooked up his 20GB ipod last night after updating his sister's nano and now the itunes thinks his ipod is a nano. How do I get the itunes to recognize his ipod as the 20GB it is?
-
REQUEST RUNNING FOR MORE THAN ONE DAY - HOW INVESTIGATE ABOUT THIS
Hi Everyone ...
As you know when you submit any request throigh concurrent manager . The request completed normal or give warning or error .
My probelm I have request running for more than one day .but I don't know right tool how invetigate about this issue .
I checked alert log and database lock but nothing wierd .
We are using 11.5.10.2 with 10.2.0.4 DB .
Thanks in advance ...
Edited by: user12010537 on 26/09/2010 05:39 ص
Edited by: user12010537 on 26/09/2010 05:46 صHi,
schavali wrote:
Use MOS Doc 735119.1 (How to Find Database Session & Process Associated with a Concurrent Program Which is Currently Running) to determine the PID of the concurrent request, then follow the steps identified in MOS Doc 1058210.6 (How to Enable SQL_TRACE for Another Session or in MTS Using Oradebug)
enable tha trace
Re: enable tha trace
Thanks,
Hussein
Maybe you are looking for
-
Events in iCal on Mac Mini don't upload to MobileMe during Sync
I have many iCal events on my Mac Mini, running OSX 10.6.8, that don't sync up to my MobileMe iCal and thus don't sync back down to my MacBook Pro, also running OSX 10.6.8, nor to my iPhone. As a result, I'm not getting notified of events that I shou
-
I'm trying to download some purchased TV shows to my iPad Air. I keep getting the dreaded Download Error Tap to Retry Message. I've signed out of iTunes and back in. I've updated my software. I have plenty of room for them on the Air. We are tak
-
Apache pdf file permission issues
I have a intranet site that I need to publish some pdf files. I am using a G5, Leopard and apache 2 and PHP. My PHP is just providing a link the pdf documents, but when a user clicks on the link they get a message "You don't have permission to access
-
How to remove tags (not color tags)
How to remove tags (not color tags) I love the idea of the tags, however there comes a point when some become irrelevant. How can I remove them. I highlighting them in the dialogue box and hitting the delete key, that does not work. ?
-
Iphoto Library proper way to copy or export
Hi Folks, I would like to export or copy my entire Iphoto library over to a new drive for a complete backup. I tried to export and chose Iphoto library (which has 663 files thus far) and it keeps aborting. Can I just copy or drag the whole Iphoto fol