Proper FRU for replacing bad X100e LCD unit?

I have an X100e which is a few months out of warranty; and the screen recently started going blank (still lit, so the backlight isn't the problem...). It's been in a state where the angle changes whether it will turn on--sometimes upwards/forwards pressure will turn the screen on. I took it apart and found that the thick round cable going into the LCD from the graphics unit (not one of the antennae, perhaps DC-in?) was extremely worn, so that I could see traces of the copper. I'm guessing this is the issue, though a different cable is also possible I looked at the Hardware Maintenance Manual, but am not sure what FRU this corresponds to. What I'd prefer to do if possible is replace the whole LCD unit, complete with cables, but I want to verify what I'm getting. What FRU numbers/parts labels should I look for? (I have already replaced the keyboard, so the above information should get me if I diagnosed it properly).
Solved!
Go to Solution.

There are 2 choices of cable depending on your 4-digit model number. Most models use 45M2885. For that one, here is one on eBay from a seller I use all the time for $9 http://www.ebay.com/itm/Lenovo-Thinkpad-X100e-Fru-45M2885-LCD-LED-Video-Cable-Tested-/280830398533?p...
Models starting with 3507 use 45M2918, which is hard to find, but you can buy it from IBM here: http://www-304.ibm.com/shop/americas/webapp/wcs/stores/servlet/default/TopCategoriesDisplay?cntrfnbr...
From your description, I am not 100% sure what part you mean. I am sending you a pm with my email address and you can send a picture if you wish.

Similar Messages

[svn:bz-trunk] 10631: Proper fix for BLZ-343 and LCDS-1153.

Revision: 10631
Author:   [email protected]
Date:     2009-09-28 05:23:42 -0700 (Mon, 28 Sep 2009)
Log Message:
Proper fix for BLZ-343 and LCDS-1153.
Refactored the common logic for AMF0 and AMF3 back into AbstractAmfInput. Resolving class aliases, creating and registering a property proxy and instantiating the appropriate class are now handled in the superclass. The resolved className and the proxy are 'returned' to the subclasses via a holder array created in the subclasses and sent as a parameter.
blazeDS checkintests pass
lcds-trunk checkintests pass with the new flex-messaging-core.jar
lcds-trunk alltests-dataservice pass with the new flex-messaging-core.jar
Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-343
    http://bugs.adobe.com/jira/browse/LCDS-1153
Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/io/amf/AbstractAmfInput.java
    blazeds/trunk/modules/core/src/flex/messaging/io/amf/Amf0Input.java
    blazeds/trunk/modules/core/src/flex/messaging/io/amf/Amf3Input.java

Proper procedure for replacing drive in Xserve RAID RAID5 set

I've got a five-drive RAID-5 set (with a sixth hot spare) in an Xserve RAID running the 1.5/1.50f firmware. One of the drives in the RAID-5 set has an amber/orange status light on and has been getting occasional errors like to following:
Timestamp: 11/10/10 10:34:53 AM
Priority: Warning
Controller: Upper Controller
Type: 112
Event ID: 1000
Event: Disk 5 Reported An Error. COMMAND:0x35 ERROR:0x10 STATUS:0x51 LBA:0x19B80
Description: The drive reported an ATA error. This is a failure in the communication from the RAID Controller to the drive.
I have double checked the drives in RAID Admin and, as the drive is only in a warning state, the hot spare has not been pulled into the RAID set yet. As this is an old drive, I'd like to replace that particular drive first. I have a current, full backup of the data, but want to make sure I understand the process correctly.
I understand the "Installing or Replacing an Apple Drive Module" section of http://manuals.info.apple.com/en/XserveRAID_UserGuide.PDF, but it and RAID Admin's built-in help don't describe what will happen when replacing a drive in a RAID set that has a hot spare. When I pull out the drive and replace it, will it correctly use the newly inserted drive or will it use the hot spare? If it uses the hot spare, will the hot spare revert back to a hot spare once the new drive is inserted or will it permanently become a member of the RAID set and need to be moved to the original drive's slot? Or, should I just pull out the hot spare, pull out the failing drive, and pop the hot spare into the failing drive's slot?

Hello, makkintosshu, and welcome to the AppleBoards,
If you pull out the drive the RAID should/will immediately start rebuilding using the hot spare. The hot spare will become a new permanent member of the RAID and the new replacement drive will become the new hot spare. The physical slot locations of the drives don't matter you can build a RAID from any combination of drives as long as they are on the same side.
If you pull the hot spare and then the failing drive the RAID will wait for a new drive before taking action. I find it hard to recommend this course of action unless there is a really good reason for you not wanting the hot spare to become part of the RAID. Rebuilding is going to take a good long while and you want it to start as soon as possible - as long as the RAID is not rebuilt your data is at risk. Letting the RAID rebuild hang as you physically swap out the failed the drive strikes me as bad idea that needs a really good justification.
HTH,
=Tod

FIOS Router Replacement - Is it leased (no charge for replacement)?

Hi all,
All's working good, no problems but I was curious about the procedure for replacing a defective Router Unit. I have the Westell Model A90-9100M15-10 (91OOEM) model Coax/Ethernet Router unit.
Is there an additional fee for obtaining a replacement? Are these Routers leased, ie, cost included in my monthly Verizon FIOS bill?
If I needed to order a replacement Router, is the shipping turnaround time usually 1 day?
Can these Routers be obtained at a local Verizon outlet store? I'm located near one of those stores.
Solved!
Go to Solution.

The router is not leased. There is no monthly charge for it.
Over the years, VZ's policy regard the router has changed several times, so it depends on when you got the router.
1) Originally VZ gave away the router.
2) Then VZ stated charging for the router, but issuing a credit for the amount of the charge resulting in a net cost of $0.
3) Now VZ says they own the router.
In any case, VZ will replace a faulty router at no charge. They may or may not want the old router back depending on it's age.
Shipping turnaround on a replacement router is very fast. Whether you get it in one day depends on when you order it.
Yes, you should be able to obtain a replacement router at a VZ store.

How much it cost for replacement of ipad mini 2 lcd with retina and touch screen

how much it cost for replacement of ipad mini 2 lcd with retina and touch screen

Apple's Limited Warranty http://www.apple.com/legal/warranty/ for iPad excludes coverage for damage resulting from accident, disassembly, unauthorized service and unauthorized modifications.
The warranty will apply to the country of purchase. And if there is a problem needing repair you have to return it to the country of purchase.
Out-of-Warranty Service
If you own an iPad that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will replace (Apple doesn't repair) your iPad with an iPad that is new or equivalent to new in both performance and reliability for the Out-of-Warranty Service fee listed below. (The replacement will most likely be a refurbished iPad in a brown box, however, it has a new screen, back and battery.)
iPad model
Out-of-Warranty Service Fee
iPad mini
$219
iPad 3rd, 4th, Air
$299
iPad 2, iPad
$249
A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in US dollars and are subject to local tax.
Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPad that has failed due to contact with liquid may be eligible for out-of-warranty service. See http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad
iPad Repair and Service
http://www.apple.com/support/ipad/repair/
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
You may can get the iPad repaired at 3rd party repair sources for less $, however, any remaining Apple warranty will be voided.
iCracked - Broken iPhone, iPod or iPad
http://www.icracked.com/
iReVamp Electronics Screen Repair ($99)
http://www.irevampelectronics.com/ipad-2-broken-glass-screen-repair.html
iPad Repair & Screen Replacement Services
http://www.ifixyouri.com/16-ipad-repairs
RepairZoom iPad Repair
http://www.repairzoom.com/ipad-repair.html
Mission Repair
http://www.missionrepair.com/Apple_iPad_Repair_Services_s/431.htm
iGadgetResQ
http://www.igadgetresq.com/ipad-repair/
Do It Yourself iPad Repair
http://www.ifixit.com/Device/iPad
 Cheers, Tom

Proper procedure for patching from Single User mode

Typically when I install a patch cluster from Sun, I do a sanity reboot from the console of the server using:
shutdown -y -g0 -i6
When the system comes back online, I log into the console again and then do:
shutdown -y -g0 -i0 (to go into OBP)
then
boot -s (to go into single user mode)
The procedure above was given to me from a Sun technician.
Then I install the patch cluster and reboot. It has come to my attention that Sun recommends breaking any mirrors between your disks before patching. I wanted to know what is the best way to do this for both Veritas Volume Manager and Solaris Volume Manager. For Veritas Volume Manager, I was thinking of going into the vxdiskadm menu driven utility and choosing the option to "Remove a disk for replacement" for the rootmirror disk and then after a reboot to check that the patches did not cause a problem, go back into vxdiskadm and choose the option "Replace a failed or removed disk" and select the rootmirror which should then begin to automatically resync itself to the primary rootdisk. Any comments on if this is a proper way to do this or if someone has a better method, I would love to hear it. I am assuming a system with just two internal disks: c1t0d0s2 and c1t1d0s2
Also, if anyone can comment on how to do this with Solaris Volume Manager or if it is required would be great also.
Thanks much for any advice.

Typically when I install a patch cluster from Sun, I
do a sanity reboot from the console of the server
using:
shutdown -y -g0 -i6
When the system comes back online, I log into the
console again and then do:
shutdown -y -g0 -i0 (to go into OBP)
then
boot -s (to go into single user mode)
The procedure above was given to me from a Sun
technician.Not a bad thing to check reboot before patching, but I don't think it's in any official documentation that I'm aware of.
Then I install the patch cluster and reboot. It has
come to my attention that Sun recommends breaking any
mirrors between your disks before patching.Again, I don't know if it's "official", but if you have a backup copy that you could boot from, it does reduce the possibilities of critical problems from a bad patch.
I wanted
to know what is the best way to do this for both
Veritas Volume Manager and Solaris Volume Manager.
For Veritas Volume Manager, I was thinking of going
into the vxdiskadm menu driven utility and choosing
the option to "Remove a disk for replacement" for the
rootmirror disk and then after a reboot to check that
the patches did not cause a problem, go back into
vxdiskadm and choose the option "Replace a failed or
removed disk" and select the rootmirror which should
then begin to automatically resync itself to the
primary rootdisk. Any comments on if this is a proper
way to do this or if someone has a better method, I
would love to hear it. I am assuming a system with
just two internal disks: c1t0d0s2 and c1t1d0s2
Also, if anyone can comment on how to do this with
Solaris Volume Manager or if it is required would be
great also.Well, it'll work as you've described, but what if the patches fail? The disconnected mirror is not bootable. You'd have to go through an unencapsulation and other things from a CD.
I've often simply pulled one side of the mirror while the machine was shutdown. Since the mirror was valid prior to pulling, it will boot. If there's a problem, I shut down, swap disks, and boot from the untouched mirror. If no problem, I re-insert, reattach the disk to the diskgroup, then recover the volumes.
I don't know of any nice supported method of booting from an offline VxVM mirror that doesn't involve a very long series of steps. My method isn't supported, but it does work. If you have both disks in the machine at the same time though, it'll update the private regions. Don't do that until you're ready to sync up one way or the other. Test before doing it in production.
In any event, you should have a backup ready to go.
Darren

Apple store offered me refurbished iPhone 4 for replacement, I declined...

I went to a local Apple store yesterday to see if they have any option for my Death Grip iPhone 4.
After short demonstration about loosing reception, he brought a shrink wrapped black boxed iPhone 4. I asked him if it's a refurbished unit and he said yes, he also mentioned it's a service unit they received from factory. Its serial number was starting with 850 (mine as well)
I declined for exchange since I had a bad experience with 3G refurbished unit from Apple before (wireless dead after 4 months and battery was so bad)
But I'm wondering if it's really a refurbished iPhone 4 since it's only been 3 days from official launch.
Does Apple make extra new units for replacement service for newly launched products? If so, I'll go get it tomorrow.
Any comments?

That's weird they would have refurbished already, but yes they usually do warranty replacements with refurbished product.
According to Apple:
Apple Inc. (“Apple”) warrants this Apple-branded hardware product against defects in materials and workmanship under normal use for a period of ONE (1) YEAR from the date of retail purchase by the original end-user purchaser (“Warranty Period”). If a hardware defect arises and a valid claim is received within the Warranty Period, at its option and to the extent permitted by law, Apple will either (1) repair the hardware defect at no charge, using new or refurbished replacement parts, (2) exchange the product with a product that is new or which has been manufactured from new or serviceable used parts and is at least functionally equivalent to the original product, or (3) refund the purchase price of the product. Apple may request that you replace defective parts with new or refurbished user-installable parts that Apple provides in fulfillment of its warranty obligation. A replacement product or part, including a user-installable part that has been installed in accordance with instructions provided by Apple, assumes the remaining warranty of
the original product or ninety (90) days from the date of replacement or repair, whichever provides longer coverage for you. When a product or part is exchanged, any replacement item becomes your property and the replaced item becomes Apple’s property. Parts provided by Apple in fulfillment of its warranty obligation must be used in products for which warranty service is claimed. When a refund is given, the product for which the refund is provided must be returned to Apple and becomes Apple’s property.

How can I repair a screen that pixelates and goes white randomly without replacing the whole LCD ?

I bought a unibody Macbook Pro 13,3" in 2009 (refurbished), so it is out of guarantee.
Since about two weeks, my screen randomly freezes on image, pixelates
and goes white. Like this. To correct the problem, I have to adjust the angle
of my screen, or press on the corner of the cover and it returns to normal.
But not for long.
I removed the bottom cover to remove all the dust in the hardware, the fan, the circuits
and what is related with the screen system. I verified the cables, the inverter, it was
in a really good condition. Note that I never dropped it or spilled liquid on or near my
laptop, I am a real maniac.
I talked to an Apple Genius here in Montreal, I explained it was not software
or graphics-related since I tried my computer on an external screen (which
worked fine even when the screen freezed). The only solution they found in
the Apple Store was to replace the entire LCD, at full price.
I then visited my local repair shop and the man did the same thing as me,
watching the components, connections, circuitry and when the problem
happened, he was puzzled.
I'm aware this problem is more and more often among Macbook users, and
I didn't find any solution elsewhere on Internet, so please, if anybody finds
out the origin of the problem, answer this thread and you'll help us all !
Thank you.

I would think that the Apple store Genius' diagnosis is correct. What you might consider is purchasing the display and installing it your self and thereby saving some money for a Molson or two. There are places on the web where you can find detailed instructions such as iFixit. If that is out of your realm, then bite the bullet and have the Genius do it for you (then you do get a 90 day warranty).
Ciao.

14th May 2013. We placed an order on medIT (Medit Information Technology)for the following items: 6 units of Apple iMAc-All_in-one-1 core i

14th May 2013.
We placed an order on medIT (Medit Information Technology) for the following items:
6 units of Apple iMAc-All_in-one-1 core i5 2.9 GHz-RAM 8GB-HDD 1x1tb-GF GTX 660M- Gigabit LAN-WLAN : 802.11 a/b/g/n, Bluetooth 4.0-OS x 10.8 Mountain Lion- Monitor : LED 27”wide- keyboard: English.
We paid to their account; Bank of Cyprus Public Company Limited the full invoice value.
As of today 14th May 2013 we are still waiting for delivery of the goods despite numerous advices that a partial order of 3 items the order has been shipped.
We have made numerous follow up calls to medIT directly and through other customers of medIT, but we have no clue as to when we will receive the goods. On 29th April, 2013 they gave us a FEDEX airwaybill no..We regret that we have not been able to trace this airwaybill on the FEDEX system.
We are, therefore, pleading for assistance from any support group to link us with the right department so that we can have accurate information on the movement of this parcel.
These items were ordered for a government department of the Republic of Zambia and this non-delivery is creating a bad name for Apple Resellers covering Zambian market. The project upgrade of the project is now falling behind due to non-delivery on our part arising from the non-performance on the part of medIT.
We can make available for inspection copies of the order and remittance details to the appropriate office for review and ready reference.
We can be contacted directly on “James A. Ngoma”
<Personal Information Edited by Host>

If you ordered from MedIT in Cyprus, they do not appear to be an authorized Apple reseller. If they are indeed not authorized by Apple, there will be nothing Apple will be able to do to assist you in this matter. You will need to work the problem out with MedIT, obtaining legal assistance in Cyprus if necessary.
Regards.

HT4044 Part of my iPad(1st gen) screen display does not show,hence I can only see it partially.It was not dropped and neither is it broken. Any help as I was told it cant be fixed and i hv 2 replace with a new unit i.e. pay in full as warranty is over? HE

Part of my iPad screen display does not show. It was not dropped and neither is the screen broken. I was advised to see the local service provider for a diagnosis.
I had finally managed to find time to find a local service provider last week (not easy) and was disappointed to be advised of Apple's policy of one for one exchange i.e. they wont repair and said that i would have to replace with a whole unit. As my unit is no longer under warranty, it meant that I had to pay for the full price of a new unit!
I might as well have paid for the latest new unit but since my unit is only 2 years old at most, it would be a great waste of money.
How can this be? Does this mean apple's product is inferior and do not last since warranty is only for one year?
I sincerely hope there is a favourable solution otherwse my money is flushed down the drain.
HELP!!!

I was using my iPad last night, shut the power off and when I turned it on this morning 2/3 of the screen is not working. It looks like the pandalela picture. What is the answer to fix this; is this a screen issue or and electronics issues. Has anybody else experienced this?

What is proper permission for this command?

Hello,
What is the proper permission for this command:
SQL> CREATE OR REPLACE DIRECTORY EXT_TABLES AS 'C:\temp\';
CREATE OR REPLACE DIRECTORY EXT_TABLES AS 'C:\temp\'
ERROR in line 1:
ORA-01031: insuficient privileges
Thank you vey much indeed.
Sincerely yours,
André Luiz

Dont' grant create any directory to your users. This is big security hole!
You can read/write every file on the server with the file permissions of the Oracle user.
You better grant explicitly only the necessary privileges to your user, as I demonstrated in your other thread
Issue as user SYS
create directory EXT_TABLES as 'c:\ext_tables';
grant read,write on directory ext_tables to scott;
[pre]

Can I request for replacement parts abroad?

My HP Pavilion dv6-3152ee hangs when used more than 15 minutes .Still under warranty so I brought it at the service center here in the Philippines. They have confirmed that the "thermal module" ( I think it's the fan and heatsink ) isnt working properly. I left the unit till they've found parts for replacement. It took more than a month in their office waiting for parts.
Unfortunately, There was no available part here in the Philippines and my laptop was still unusable til now. They've suggested that I may send the unit to Saudi where it was bought so I pulled out my unit. My brother ( who bought my laptop there ) said that the unit was also imported to Saudi and there is a big chance that they also lack spare parts.
My warranty is gonna expire this coming february so I must do something or else I may lost my customer service privilege.
Where should I send my laptop? How can I make sure that the have a part for that? Is there any way that I can request part for my laptop?
Thanks in advance

Hi,
They will work out the faulty parts for you. You can not tell them to replace this, replace that. In my case, he (not HP engineer) came to my house to work this out and ordered parts for him (not for me) and came few days later to fix the machine.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Report for replacement stock to be recived from vendor

Hi
I HAVE ONE ISSUE ON ABOUT VENDOR REPLACEMENT STOCK REPORT
EX:.. i have done GR for material-A qty 100...and ihave done MIRO for this ..pur.order..
after 20 days i have return the materai-A ..qty 25..(without cancel the MIRO) with movement tuype 122..but this material should be return from vedor.(subsequent deliver).after some days or weeks ..( bcoz money has already paid to vendor)...like this we many materials ..
for this... i want report for replacement material will be recived from vendor
regards
sesidhar

Hi
already i have done MIRO..
then return to vendor qty 25..(through MIRO...w/o creadit memo
thne again recive the replacement material ..through MIGO (subsequent delivery)
in this case ..need to create credit memo..?
if yes.. pls...send me procedure.
regards
sesidhar

Production Order for a Material with two units of measure?

Hi Everybody I have the following issue.
In my company there is a new production process with a Material that should be configured in the master data with the field "Base Unit of Measure" as per unit (each). But the production process, should be confirmed by tx CO11N, in Kilograms. I know that I can use the additional Data in tx MM03 to set a Production Unit, but the value of convertion would be fixed. For example 122 Kg = 1 each, the thing is that the value in kilograms for each lot can vary, one lot can weight 122 and another one can weghr 125, and in each case I shoul have two units in stock. And as I have the value of convertion fixed, when I confirm each lot one for 122 kg and another for 125 kg I will have 2.025 units in MB52.
How can I solve this problems? I need to have the chance the confirm in kg changing for each lote the quantity but in the base Unit of Measure have one unit for lot. As if for tx CO11N I could have a field where I can set tha x quantity of Kilograms is x each.
Kind regards
Leandro.

Hi Ayoub, First thank`s for your promt answer,
1. The Quantity is different, because is not a perfect process, there is a manual work in the process that makes this quantity differ, there is no big difference, maybe a Kilo or Two but the production mannager wants to have this registered. And besides in productions they manage kilograms, but for selling the comercials manage units (each - EA)
2.The convertion rate is known at the end of the process after cutting and packaging a unit, they weight it.
Regards
Leandro

I need the proper settings for Acrobate Reader 9.3 to be backward compatable to open PDF 6.0.

I have a full license for Adobe Acrobat Professional 9. I just got off the phone with Acrobat technical support about once you install Acrobat Reader 9 to read documents online using Internet Explorer and Firefox. That it would make documents that were scanned in with CapturePerfect3.0 and a Cannon document scanner using Adobe Acrobat Professional 6.0 saved in PDF format and stored as images with records stored with Access Database front-end and SQL Server backend. Simple 6.0 PDF documents stored scanned documents in a database. O.K.! The problem is once you upgrade to read newer version of Acrobat PDF documents that our staff must read online, it makes reading saved database 6.0 PDF documents unreadable. Technical support informs me that it is a settings fix in Acrobat Reader 9 but because the Acrobat Reader 9 is a free download that can't tell me how to fix the settings.
So here I am trying to find out the proper settings in Acrobat Reader 9 to read new Acrobat documents online and old 6.0 Acrobat PDF documents on Windows XP Pro workstations and one Windows 7 workstation of the CEO's assistant. So please help me with the proper setting for Acrobat Reader 9 to work online reading newer PDF documents and still read Acrobat 6.0 documents stored in a database.

Adobe Reader 9 can open old and new pdf files.

Proper FRU for replacing bad X100e LCD unit?

Similar Messages

Maybe you are looking for