Property node for a chart with multiple axes

I have created a chart with two y axes, one for each of two data sets
that I am plotting. From the front panel, I can view the properties of
the chart and adjust the scales of the two axes separately under the
Scales tab. I need to, though, adjust the maximum and minimum of these
axes programmatically. How can I create a property node that refers to
one of the two y axes, and how can I specify which axis the node is
referring to? If create a generic YScale:Minimum property node, I get
an error.
Thanks for the help,
TJR

"...YScale:Minimum property node, I get an error."
That is curious.
You can specify the active scale for which the property will be applied.
The attached demo (in LV 7.1) illustrates how to do this by fist setting the index of the active scale and then updating its property (property nodes execute from top to bottom).
What error do you get?
Ben
Message Edited by Ben on 11-30-2005 08:07 PM
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction
Attachments:
Set Active Scale.vi ‏27 KB
Set Active Scale.JPG ‏18 KB

Similar Messages

  • How to set property nodes for each of the multiple y-axes?

    In Labview 6i, I have set up multiple y-axes on an xy graph. I want to change certain properties of each of the 2 y-axes independently. I believe I can do this using "property node".
    However, after I have created a property node for the xy graph, I realised that there is only 1 y-axis selectable from the list of properties. How can I set the property of the other y-axis then?
    Thanks for the help!

    I believe there is a property called "active graph"... this allows you to
    select the active graph to apply the property changes to...
    Later...
    meng118230 wrote in message
    news:[email protected]..
    > In Labview 6i, I have set up multiple y-axes on an xy graph. I want to
    > change certain properties of each of the 2 y-axes independently. I
    > believe I can do this using "property node".
    >
    > However, after I have created a property node for the xy graph, I
    > realised that there is only 1 y-axis selectable from the list of
    > properties. How can I set the property of the other y-axis then?
    >
    > Thanks for the help!

  • Column Chart with Multiple axes

    Hi folks
    I am using flex 2 charts for displaying data. I want to show my data using column chart with secondary axis. However columns for multiple series are coming one over another. here is the code I have attached:-
    But I want to put columns side by side. Any thoughts will be appreciated.
    Warm Regards
    Rush-me

    Any thoughts?
    Warm Regards
    Rush-me

  • Is it currently possible to create a doughnut chart with multiple concentric circles in SSRS?

    Is there currently any way to create a 'doughnut' chart with multiple concentric circles in an SSRS report (any version), without using 3rd party tools?
    Something like this, perhaps?
    (For that matter is it possible to create this using JavaScript?  It's my understanding that this image was originally created in a web app using JavaScript.  So far I've not been able to pin down the details.  I've found hints that JavaScript
    can be used in SSRS reports but so far no clear working examples.)

    Hi B.Chernick,
    According to your description, you want to create a create a doughnut chart with multiple concentric circles in your report. Right?
    In Reporting Services, we only have doughnut chart with one concentric circle. All the category group is in that concentric circle. Though we can embed javascript injection in expression, it only give the css style to values or report
    items which can change the looking. It can't change the structure of the report items itself. So your requirement can't be achieved current.
    For your requirement, we suggest you provide Microsoft a feature request at
    https://connect.microsoft.com/SQLServer
    so that we may try to expand the product features based on your needs.
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou

  • How can I make a "property node" for a VI?

    Hello!
    If I add a boolean button on the FP then I am able to make a property node for that button in the Block Diagram. But how can I make a property node for a VI? I have several VI:s an that together is one program. What I need to do is to verify what kind of VI some of my VI:s is. I need to verify if it is .exe or .vi-file, and if it is .exe then I want to disable run, abort, run continuously bottons otherwise not. I have hard that this is possible to do programmaticaly but I can´t figure out how. I am aware that I could do that manually in the File->vi properties->customize->windows appearance but theese choises makes it last forever.
    I want to be able to stop and run and everything if it is a .vi file, but if it is .exe-file then all those buttons should be disabled.
    Anyone have an example on this?
    In an other message at this Forum I read "You can use the `Front Panel Window. Allow Runtime PopUp`" property to disable run-time shortcuts menues programmaticaly, but still I dont know how to create this property node.
    /Amir

    You really shouldn't open a new thread. If you don't understand something, ask and we will explain it.
    Like I said in the other thread, you can check if you are running in LV or an EXE by using the Application>>Kind property. To get it, place a property node (from the Application Control palette) on the diagram, click it and find the property.
    To set the properties for the VI, place another property node, right click it and select Select Class>>VI Server>>VI. You should have the properties you want under Front Panel Window.
    To learn more about LabVIEW, I suggest you try searching this site and google for LabVIEW tutorials. Here and here are a couple you can start with. You can also contact your local NI office and join one of their courses.
    In addition, I suggest you read the LabVIEW style guide and the LabVIEW user manual (Help>>Search the LabVIEW Bookshelf). I believe chapter 17 of the user manual explains about programmatic control of VIs.
    Try to take over the world!

  • Creating SVG Chart with multiple lines

    Hi All,
    I want to create a chart with multiple lines.
    Ex: I have one emp table with empno, sal and deptno columns.
    I want to print deptno in x axis and no of employees on y axis.
    I want to print one line for employees with sal > 15000 and one more line for employee with sal =< 15000
    So one line will show no of employees with sal more than 15000 for each dept. Similar case for the other line and these 2 lines should be in different colors.
    For one line the query will go as
    select link, deptno, count(empno)
    from emp where sal > 15000 group by null, deptno
    Is this possible to draw this chart?
    Thanks,
    Manoj

    I wasn't able to do something like what you describe, but I was able to do this:
    I defined column A of the table as a Header Row, selected the cells in the table, and chose this chart type (2D 2 Axis):
    Then I clicked the chart and in the pane at the right checked 'Axis Name' in the Axis tab and added the axis names.
    Maybe this can give you an idea of how you can illustrate the relationships that you want to show.
    SG

  • Buffered high-speed capture with multiple axes

    Has anyone succeeded in using buffered high-speed capture (on 7350 boards) with multiple axes?
    The capture works really well for me on a single axis, but when I try to use it on 2 axes simultaneously it behaves very strangely.  There seems to be some kind of unwanted interaction between the two buffers which means data points are lost and they often stop updating altogether.
    A very similar question was posted here over a year ago (http://forums.ni.com/ni/board/message?board.id=240&thread.id=4087), which includes a more detailed explanation and an example VI.  Can anyone help?  I'm using LabVIEW 8.5 RT with NI-Motion 7.6 and a 7358 board.
    Thank you,
    Ian

    Hi Ian
    I have been asked working with kostas on this problem for you and just wanted to give you an update as I know its been a while and is an important issue for you. I have been chasing up our specialists in the field and resently had responses of  the kind:
    "Hi Graham
    The issue was found out to be a bug in our motion driver. The issue is being examined by motion R&D right now. I do not know a time frame on when this will be fixed as it is proving to be a tricky problem. I am copying Stuart and Lorne on this since they have been working on it as well.
    Thanks,"
    Be assured that I am chasing it as closely as I can. From your end what is the situation, do you have a work arround that will suffice or are you still waiting on this.
    Thanks for your understanding and I look forward to hearing from you with your current situation.
    best regards
    Graham Green
    Technical Marketing Engineer
    National instruments UK & Ireland

  • Question(s​) about the Active Cell:Posit​ion property node for a table control

    Hello,
       What determines the Active Cell Position property node for a table control? I have this in my code and I am displaying its value to a front panel indicator. The value displayed is always set to 0,0. The help for the property node say that it is "read -only" so what sets the value of Active Cell Position  for a Table Control?
    Regards,
    Kaspar
    Solved!
    Go to Solution.

    You set the active cell with a property node.  Once you select an active cell, you can do specific things to that cell and that cell alone, things like set the background color.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • Line Chart with Multiple Series

    Post Author: JayZee
    CA Forum: Charts and Graphs
    HI
    I am trying to create a line chart with multiple series for trend analysis on CR XI but not having much luck, I thought it would be so simple to do!
    My data is provided summarized on the server and is returned as 12 rows:
    Month       Year1        Year2      Year3      Year4     Year5January      100           80          75           90          120February      85           25           40           25          80etc for the rest of the months
    My problem is that I can only get the chart to accept the values to display as a summary and not just as the data pulled back from the server.  I have read an article on the support site for Crystal 6.0  but it doesn't seem to translate well into XI.
    If necessary I could redesign the table to bring back un-summarized data but that is quite a big job.
    Any help greatly appreciated.
    Jay

    Post Author: Tim Wise
    CA Forum: Charts and Graphs
    In the chart expert, put Month in the 'On change of' box and put each year in the 'Show values' box. This puts the month on the x-axis and plots each year as a line.
    Is that what you want?
    I did this in CR 2008 using your data in an Excel sheet.

  • "Scatter" Chart with Multiple Values per Date

    APEX Gurus,
    I need to plot a chart with multiple y-axis values along the x-axis.
    Here's an example:
    X-Axis (Date) Y-Axis (Number)
    1-JAN-07 1
    1-JAN-07 2
    1-JAN-07 3
    2-JAN-07 1
    2-JAN-07 2
    3-JAN-07 1
    Right now, APEX displays the X-axis (Date) as separate values on the x-axis. But I want all three 1-JAN-07 values to line up vertically under x-axis. I am currently using a line chart for this. And it displays a "dot" for each value (depending on my max rows value).
    Any insight would be much appreciated! And thanks in advance!
    Susan

    You can try using this charting tool for generating scatter charts:
    http://htmldb.oracle.com/pls/otn/f?p=31517:58
    Denes Kubicek

  • Report for CS15 tcode with multiple material nos. in selection screen.

    I want to develop a report for cs15 but with multiple materials.
    Like in cs15 we enter the material and its plant, then click on multi level check box and get the output. But cs15 works only for a single material. I want to develop a report in which i'll give multiple material nos. and then i should get the output for each material entered just as the output that would appear in cs15 for that material.
    How do i do it.
    I have tried but i'm not able to track back.

    Hi Priti,
          try develop a interactive report which lists all the materials in the first screen and when you double click on each of the material then call transaction CS15 output by skipping the first screen .Use set parameter to pass the material .
    Regards,
    Sirisha

  • For the cm with multiple bps, what are the options for workaround?

    For the cm with multiple bps, what are the options for workaround?
    customer a purchases 1000
    and returns 800 at POS
    customer b was used at SAP related to  this transaction, purchase amounting to 2000,what can we do to apply the returns of customer a to customer b of 800 return transaction at pos?customer a and customer b code pertains to just one client---but were given different codes at POS and at SAP

    Hi,
    If one customer has two codes, you can only do manual journal entry to adjust their accounts.
    Thanks,
    Gordon

  • Tree Control Property Node for Accessing "Child Text" String Array

    When adding items to a tree control using the EditTreeItems invoke nodes, the inputs include "Child Tag", "Item Indent", "Child Only?", "Glyph Index", "Child Text", and "Left Cell String" as can be seen in this screenshot.
    There are property nodes for the tree control for accessing each of these elements, except for the "Child Text", which is an array of strings. It is possible to access this data as outlined in this forum post, but this method is somewhat involved and round about. 
    I suggest that a property for the Tree class be created to access the Child Text array directly.

     The work around only works if you do not have an empty string element some where in the middle.
    At lest could the "Active Celltring Property" read return an error when you have gone beyond the end of the array.

  • Mixed signal graph property node for plot groups?

    Hello!
    Is there a property node for the name of the Groups in a mixed signal graph?

    Hello
    as you can see in
    http://forums.ni.com/ni/board/message?board.id=170​&message.id=226983&requireLogin=False
    there is no property for plot groups.
    Thanks,
    Rebecca Fox
    Applications Engineer
    National Instruments

  • Using One Property Node For Multiple Controls/I​ndicators

    Question for all you LabVIEW gurus.  Is there a way to create 1 property node that is used for multiple indicators?  For example, if I wanted to display the same value on 10 different indicators using the property node - value function do I need to create 10 separate property node-value instances for each indicator?  Or is there a way to tie all of those indicators to only one property node?
    Thanks!
    Solved!
    Go to Solution.

    Hi hobby1
    You could create a cluster, and inside in it put all the indicators, see the image attached
    Attachments:
    capture1.JPG ‏14 KB

Maybe you are looking for