All open items are not appearing in f-44 for vendor
Hi friends,
I am unable to find all open items in f-44 to clear vendor open items.
I checked in BSIK, it has 3 line items and in FBL1N also having 3 line items.
2 line items are debit and 1 line item is cr.
Dr line items are appearing in f-44 where are Cr (Vendor cr (31) is not appearing in f-44,
Please help me.
Regards,
suresh
Halo,
one of the document might be stuck in APP run.I mean proposal run.
Regards,
Praveen R Marati
Similar Messages
-
FB05 All open items are not displayed
Hi,
We are trying to clear invoices on customer XXXX but it does not show all invoices in transaction FB05.
We used all Special GL indicators and with normal items tab seperately as well as simultaneously but not all items are displayed What could be the problem.?
regards,
MakrandHi
You can first analyze the open items in FD10N and check if any uncleard entries are present . I think that even if there is a payment block, the process item list should show all the open items as seen in FD10N.
Thanks
kamala -
Vendors open items are not appearing in clearing
Hi All,
I am able to see 10 open items in FBL1N (Vendors' open Item), but when try to post the outgoing payment through manual clearing, it displays only 6 open items. This is happening for very few vendors.
Please help me to get rid of this problem.
Thanks
ManishHi Manish,
Please check that the payment is scheduled in the APP. If it is there, then you can not see those line items while trying to do manual clearing/ payment.
You can delete the particular payment from Payment Proposal and only after that you would be able to see those specific line itmes in manual outgoing payment.
Thanks -
Reg: Certain Open Items are not showing in open item clearing F-44
HI all,
I want clear open items using with f-44 but cetain open items are not showing in opeing item clearing. i checked in FBL1N all open items are shwoing i want see all open items inf-44 how to see plz help me
with regards
JK RaoHi,
Check whether you r giving some additional selection take it as none and are the items in the account have any special indicator you might not be giving here.
reward pts if useful
regds -
Line items are not appearing in F-32
Dear All,
There is one unique issue that is being arised in our system where in the open line items are appearing at the time of customer line item display, but when we go for clearing these line items only some documents are appearing and some documents are not appearing at all.
Is there any reason that documents does not appear while clearing where in still the same is appearing as a open line item in customer line item display.
Regards,
Rupa.hi,
as seen from above mails,
entries are existing in BSID table
entries are passed as part of period end closing entries
entry passed in month end and reversed in next month
proposed sol
1. check the mode of passing the entry in tcode
if tcode is coming from FBS1 the entries will not appear in F-32
if 1 entry in FBS1 and other entry in F-32 then automatic reversal entries were not passed.
there was manual entry.
that is the reason 1 entry in FBS1 and other in F-32.
Thxs,
GB -
Line items are not appearing while processing F-44
With transaction F-44, to clear vendor account, the system displays only one open item, whereas there are 2 open items on the line item report (FBL1N). Further there are two line items in BSIK.
Please helpHello,
There are two line items in the Vendor account, the details are as follows:
Date Amount PK DR/Cr
31.03.2008 12,050.00 38 Cr
05.06.2008 12,050.00 28 Dr
of above while processing F-44, we are able to see only debit item dated 05.06.2008.other line item is not appearing. When tried by putting document number, it says "NO OPEN ITEMS FOUND" -
Line items are not appearing for some users
Hi
In one module pool program some line items are not appering for specific users. For Ex: Out of 5 line items user1 is able to see only 3 and user2 able to see all the line items. what might be the reason.
Regards
John.Hi,
What do you mean by line items? Are you talking about screen fields in your module pool program or output of the program?
Please clarify your issue.
Regards,
RS -
hi when iam using t code F-07 out going payment.iam getting
there are no open items managed in account 250001(rental account)
iam unable to post.hi Nagendra,
To process open item first you need to maintain that GL account for Open Item. Go to T.Code FS00 and check in control Tab page there is 'Open Item Management' check box 'whether your rent account 250001 has maintained for open item or not. if that account is P&L account then system will not allow you to maintain as open item. Only balalnce sheet GL account can be maintained as open item. If there is any balance then it will not allow you to make changes so, first make that account balance is 0 then change.
thx
Ganu -
Sheduling Agreement item are not appearing in MIGo
Hi,
Good receipt (MIGO) for Sheduling Agreement some items are not display(not appear in item detail screen in MIGO)
Delivery shedule is maintain and SA is released
where to check to slove this problem.
shakirHi,
Very help full tip ,now it is showing item with zero quantity
but not the missing item.
Hope to get some tip ...to slove.
shakir -
GL Open Item does not appear in F-03
Hi Friends,
I am trying to clear the GL open items thru F-03, while I see all the open items that appear in Line item display through FBL3N (total 25), out of them only 24 appear in F-03, I can not see the 25th item.
I have checked the document in BSIS table, it appears as open item there. The FBL3N also shows this open item.
What could be the reason that when going for Clearing thru F-03, it does not appear.
Best Regards
VK- Check some table fields in the missing documents using Transaction SE16. The following conditions must exist for the missing document numbers in question -
BSIS-XOPVW = X (Indicator: Open item management, only for G/L accounts)
BSEG-XOPVW = X (Indicator: Open item management)
BSEG-AUGBL = space (clearing document number)
BSEG-DISBN = space (discount document number)
BKPF-BSTAT = space (document status)
BKPF-XSTOV = space (indicator reversal flag)
REGUS/REGUP -> see below
- Check Note 136754 - F-03, F-32, F-44, F-28 missing open items (link below)
[Note 136754 - F-03, F-32, F-44, F-28 missing open items|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=136754]
Rgds. -
Open items are not displaying in FBL3N
This is with regard to "FBL3N" report. When we have executed this the result is as mentioned below by item wise:-
1) Open Items :- Report is showing all items (including open & closed)
2) Closed Items :- Showing no items
3) All Items :- Showing all items (including open & closed)
I am attaching the screen shots for your reference.
It is working fine for "FBL1N" & "FBL5N".
Hence request you to provide a solution in such a way that if we execute open items in FBL3N, report should show open items alone and similarly for closed & all items.
double-postso,what i need to do? i tried to change but it is showing the below error
Message text
Open item management is not defined for reconciliation accounts
You cannot change the open item management setting; (see long text)
The data contains error, you cannot save
You cannot change the open item management setting; (see long text)
Message no. FH087
Diagnosis
This account does not have a balance of zero.
System Response
You cannot switch the open item management specification on or off with
this transaction.
Procedure
If you want to switch this function on retroactively for a certain
account, you should create a new account with the correct setting and
use this to make a transfer posting of existing items.
If you want to switch off the open item management function
retroactively for an account, you must first clear all the postings
currently on this account. You cannot make any changes to the account
management method until this is done.
for this what i need to do? -
Lead time values are not appearing in the report for current year.
Hi friends,
Iam checking a report in production. where lead time values are displayed as 0 for 1 key figure lead time3 (w/0 dim) . i found there is a formula for this it shows like NODIM ( 'Lead Time 3' ).and there is a value for cal.lead time
how can i get values in the report.
Thanks ,
VRV.Hi,
Although your question is not clear, I understood that the formula built on that KF is NODIM. Basically it means, units of measurement is not considered when calculating.
Eg: 5 Minutes + 5 Kilograms = 10
You please try to analyze your KF by the above logic. Then you would be able to figure out why the data is not appearing in the report..
Assign if helps...
Regards,
Suman -
Calendar item does not appear in day view for Sunday August 1, 2010
I have a strange problem. I have an appointment on Sunday August 1, 2010. When in day view, and move from Saturday July 31 to Sunday Augsust 1 the appointment does not appear. However, if you look at list view or month view, it is there. If you continue to Monday and then go back to Sunday (all in day view) it appears. There is another person in my office with the exact same problem, so I know it is not just my phone. Anyone else have this issue? Any fix? I am concerned about appointments I will miss because of this. I added appoinments directly into the phone, no server, no exchange, no sync, same problem. It appears to be a bug in OS4.
Refer following link for understanding & solution:
Accounting document not posted from billing document SD module
Hopefully this can assist you.
Thanks & Regards
JP -
I installed the newest software update from Apple last week and ever since then when I open an application, the icon doesn't appear in the Dock. It's becoming a problem because I have multiple programs running, which is slowing down my computer, but short of going into Activity Monitor, I can't tell what's running.
While holding down the, "option," key, click on, "Go," on the Apple Menu. Open the Library foder and then the Preferences folder, then find and delete the file named, "com.apple.dock.plist." Then logout and log back in.
-
Over due items are not considered in credit check for customer
Hi Gurus;
We have static credit active for the sales order which is blocking if the sales value is more than the customer credit balance but it is not checking for over due item i.e the billing document whose accounting document hasn't been cleared yet .Though i have maintained same number days for payment terms and risk category for the customer .
Kindly guide me if have missed out any configuration or setting .
Thanks in advance .Hi Nuru,
Hope you are using automatic credit check and not simple crdit check ..Check that.
Is ur update group a standard one..?
Please paste screenshots of FD33, credit status, OVA8 etc.
Regards
Jobi
Maybe you are looking for
-
I was given an older 40gb IPOD with lots of music. I bought an IHome clock radio to play the music. Problem: The IPOD will only play the song I selected before I put it into the Ihome cradle and when the song is finished it does not advance to the ne
-
Show only Start Time in List View?
When I print my iCal calendar in List View, it prints out Start and End times for each event. This, despite the fact that I don't create End Times for these events. Just the Start Times. So everything shows up like this: 9AM (1/25) to 9AM (1/25) Brea
-
I purchased a itouch 2g and i went to restore it and it wont boot plz help
i bought a itouch 2g model#A1288 and when i did a system restore on it because it had a bunch of junk on it it wont completely boot the apple logo turns to a skull and freezes please help i payed $200 for it off of some random guy so i cant get a ref
-
i loaded lr 3 from a disk i got with my purchase of photoshop elements 10 ,it is a 30 day trial ,it loaded ok,but will noy open ,it says contact support ,i removed and reloaded it 2 times ,still nothing
-
Won't start up, just beeps
So out of nowhere, my macbook decided to turn off, and now when I try to turn it on, it just beeps at me. At first it would just beep once every 5 or 10 second, but after I removed the battery and then tried it again, it beeps three times in a row ev