PROVIDE END PROVIDE

Dear All,
I have written a program for using Logical Database PNP displaying employee data which are fetched from different infotypes. I have used PROVIDE END PROVIDE Statement. In the Report it is found that it is Printing PN-BEGDA and PN-ENDDA value for P0001-BEGDA and P0001-ENDDA when User selects following values in Selection Screen.
1) Today
2) Current Month
3) Current Year
4) Up to Today
5) From Today
if require I will send the code.
Thanks in Advance
Regards
Mangesh

Hi Mangesha,
<li>PROVIDE-ENDPROVIDE is like LOOP-ENDLOOP but It creates partial periods.
Lets say we have two records for one employee in itab p0001.We give dates on selection-screen 01.06.2008 to 01.06.2009.
Lets say p0000 has two records
1).. 01.01.2008 to 31.12.2009 -first record
2).. 01.01.2009 to 31.12.2009 -second record
If use PROVIDE statement to loop the p0000 table, It is looped two times. But if you see P000-BEGDA and P0000-ENDDA inside PROVIDE-ENDPROVIDE, the records are like below.
p0000-begda -- p0000-endda
01.06.2008 -- 31.12.2009
01.01.2009 -- 01.06.2009.
<li>It can be used to join tables more tables
Thanks
Venkat.O

Similar Messages

I cannot receive email properly now. When I open mail, it says that is downloading about 1,700 emails. At the very end, it gives me my newest ones. But this takes a long time. I've contacted the Internet service provider and verified all the right setting

I cannot receive email properly on either my IPad or my IPhone. I have had them for over a year and they have always worked fine. Until three days ago, when they both started acting up. On the IPad, when I open mail, it says it is downloading about 1,700 emails. At the very end, which takes quite a while to get to, I finally get the most recent ones. The IPad is sending emails just fine.
On my IPhone, when I open mail, it says it is downloading 100 emails, but it doesn't do that. And it gives me no new emails at all. The IPhone is sending email just fine.
I have already deleted the email accounts on both devices and reinstalled them. I've contacted the Internet service provider and verified all the right settings. The Outlook email on my desktop is working perfectly.

WMV is a heavily-compressed format/CODEC, and the processing time will depend on several factors:
Your CPU, which is not that powerful in your case
Your I/O sub-system, which is likely a single HDD on your laptop
The source footage. What is your source footage?
Any Effects added to that footage. Do you have any Effects?
Each of those will have an impact on the time required.
The trial has only one main limitation - the watermark. Now, there are some components, that have to be activated, but are not with the trial, but they would be evident with Import of your source footage, if it's an issue.
Good luck,
Hunt

Named Pipes provider, error:40 could not open a connection to sql server. Only happens on one of the front end SRS servers

when testing a datasource connection I get the following error.
Named Pipes provider, error:40 could not open a connection to sql server.
I've read all the posts on this and nothing works. This is a scale out deployment and the connection
works from the other server I have setup with SRS that is connected to the same backend SRS databases. It just doesn't work from one of the SRS front ends. I'm at a loss.. please help

Enable both named pipe and TCP communications.
Make sure client is using the same (named) pipe name as server for connection.
Kalman Toth Database & OLAP Architect
Free T-SQL Scripts
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

Email messages from my personal email account are being posted (copied) to SMS messages. I have a new cell device, and this is happening on the new device also. The copy/forward to SMS is NOT being initiated by my email provider. How do I end this?

Email messages from my personal email account are being posted (copied) to SMS messages. I have a new cell device (swtched from Droid to iPhone) and this is happening on the new device also. The copy/forward to SMS is NOT being initiated by my email provider, and not by Gmail. How do I end ûVerizon's forwarding my personal email to SMS?
Thanks.

Maybe I'm missing something but how can Verizon have control over your personal GMail account? Sounds like you do have your email set up to forward to sms.
I have certain emails that are forwarded to me as SMS but that is an option that is enabled on the email side of things and is independent from Verizon.

Intermittently, when I try to enter the internet through Safari, it freezes up and won't fully load in the internet. If I turn the iMac off and start it again, it seems fine. I have had my internet provider check everything from their end.

Intermittently, when I try to enter the internet through Safari on my Imac, it freezes up so that the loading line only goes 1/3 way across and then stops. If I shut down the computer and then restart, it usually loads fine. I have had my internet provider check eveything form their end and it is fine. I suspect that I have a software conflict. My provider and others have said that I should use FireFox because Safari is not that stable. I am running OSX Maverick on my system. This was a recent download. Is anyone else having this problem and have you any ideas how I can correct it.

If you don't already have a current backup, back up all data before doing anything else. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem. The backup is necessary on principle, not because of anything suggested in this comment. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The procedure will help to identify which such modifications you've installed, as well as some other aspects of the state of the system that may be pertinent.
Don’t be alarmed by the seeming complexity of these instructions — they’re easy to carry out. Here's a brief summary: You copy a line of text from this web page into a window in another application. You wait about a minute. Then you paste some other text, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, paste again. That's all there is to it. Details follow.
You may have started the computer in "safe" mode. Preferably, these steps should be taken while booted in “normal” mode. If the system is now running in safe mode and is bootable in normal mode, reboot as usual. If it only boots in safe mode, proceed anyway.
Below are instructions to run a UNIX shell script. It does nothing but produce human-readable output. However, you need to be cautious about running any program at the behest of a stranger on a public message board. If you question the safety of the procedure suggested here — which you should — search this site for other discussions in which it’s been followed without any report of ill effects. If you can't satisfy yourself that these instructions are safe, don't follow them.
The script will line-wrap or scroll in your browser, but it's really a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it.
If you have more than one user, and the affected user is not an administrator, then please run the script twice: once while logged in as the affected user, and once as an administrator. The results may be different. The administrator is the user that is created automatically on a new computer when you start it for the first time. If you can't log in as an administrator, just run the script as the affected user. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign ($) or a percent sign (%). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Triple-click anywhere in the line of text below on this page to select it:
clear; PB=/usr/libexec/PlistBuddy; PR () { [[ "$o" ]] && o=$(sed 's/^/ /' <<< "$o") && printf '\n%s:\n\n%s\n' "$1" "$o"; }; PC () { o=$(egrep -v '^[[:blank:]]*($|#)' "$2"); PR "$1"; }; PF () { o=$($PB -c Print "$2" | awk -F'= ' \/$3'/{print $2}'); PR "$1"; }; PN () { [[ $o -eq 0 ]] || printf "\n%s: %s\n" "$1" $o; }; a=$(id | grep -w '80(admin)'); [[ "$a" ]] && sudo true && r=1 || r=; { [[ "$a" ]] || echo $'No admin access\n'; [[ "$a" && ! "$r" ]] && echo $'No root access\n'; system_profiler SPSoftwareDataType | sed '8!d;s/^ *//'; o=$(system_profiler SPDiagnosticsDataType | sed '5,6!d'); fgrep -q P <<< "$o" && o=; PR "POST"; o=$(($(vm_stat | awk '/Pageo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); PN "Pageouts (MiB)"; s=( $(sar -u 1 10 | sed '$!d') ); [[ ${s[4]} -lt 90 ]] && o=$( printf 'User %s%%\t\tSystem %s%%' ${s[1]} ${s[3]} ) || o=; PR "Total CPU usage"; [[ "$o" ]] && o=$(ps acrx -o comm,ruid,%cpu | sed '2!d'); PR "Max %CPU by process (name, UID, %)"; o=$(kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1); PR "Loaded extrinsic kernel extensions"; o=$(launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'); PR "Loaded extrinsic user agents"; o=$(launchctl getenv DYLD_INSERT_LIBRARIES); PR "Inserted libraries"; PC "cron configuration" /e*/cron*; o=$(crontab -l | grep [^[:blank:]]); PR "User cron tasks"; PC "Global launchd configuration" /e*/lau*; PC "Per-user launchd configuration" ~/.lau*; PF "Global login items" /L*/P*/loginw* Path; PF "Per-user login items" L*/P*/*loginit* Name; PF "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=$(find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l); PN "Restricted user files"; cd; o=$(find -L /S*/L*/E* {,/}L*/{A*d,Compon,Ex,In,Keyb,Mail/Bu,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB -c 'Print :CFBundleIdentifier' "$d/Info.plist") || ID=; ID=${ID:-No bundle ID}; egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|JMicron|microsoft\.MDI|print|SoftRAID" <<< $ID && printf '%s\n\t(%s)\n' "${d%/Contents}" "$ID"; done); PR "Extrinsic loadable bundles"; o=$(find /u*/{,*/}lib -type f -exec sh -c 'file -b "$1" | grep -qw shared && ! codesign -v "$1"' {} {} \; -print); PR "Unsigned shared libraries"; o=$(system_profiler SPFontsDataType | egrep "Valid: N|Duplicate: Y" | wc -l); PN "Font problems"; for d in {,/}L*/{La,Priv,Sta}*; do o=$(ls -A "$d"); PR "$d"; done; [ "$r" ] && { o=$(sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'); PR "Loaded extrinsic daemons"; o=$(sudo defaults read com.apple.loginwindow LoginHook); PR "Login hook"; o=$(sudo crontab -l | grep [^[:blank:]]); PR "Root cron tasks"; }; o=$(syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|find tok|n Cause: -|NVDA\(|pagin|timed? ?o' | tail -n25 | awk '/:/{$4=""; print}'); PR "Log check"; } 2> /dev/null | pbcopy; exit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately, leaving the Terminal window empty. If that doesn't happen, press the return key.
If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter your password, the script will run anyway, but it will produce less information. In most cases, the difference is not important.
The script may take up to a few minutes to run, depending on how many files you have and the speed of the computer. Wait for the line "[Process completed]" to appear in the Terminal window.
You can then quit Terminal. The output of the script will have been copied to the Clipboard automatically. All you have to do is paste into a reply to this message by pressing command-V again.
Please note:
☞ This procedure is all copy-and-paste — type only your login password when prompted. When typing it, you won't see what you're typing. Make sure caps lock is off.
☞ Remember to post the output. It's already in the Clipboard when you see "[Process completed]" in the Terminal window.
☞ If any personal information, such as your name or email address, appears in the output, anonymize it before posting. Usually that won't be necessary.

Need to provide Delegation part to End Users

Need to provide set delegation part to end users. So, we have provided link to delegateWorkItems.jsp to end users. By that way, the end user can open the builtIn form End User Delegate WorkItems, How ever, the user is not able to get users to delegate by searching lighthouse users.
And if the user has any capability, then the user is getting users to set delegating from end user page. But I dont want to give any capabilities to users.
I have done the following things in my system, But got failure result
Have written rule to get AllMatchUsers in Separate rule library.
<Rule name='getAllMatchUsers'>
<RuleArgument name='userAccountId'/>
<RunAsUser>
<ObjectRef type='User' id='#ID#Configurator' name='Configurator'/>
</RunAsUser>
<invoke name='getUsers' class='com.waveset.ui.FormUtil'>
<select>
<ref>context</ref>
<ref>:display.session</ref>
<invoke name='getLighthouseContext'>
<ref>WF_CONTEXT</ref>
</invoke>
</select>
<map>
<s>conditions</s>
<list>
<new class='com.waveset.object.AttributeCondition'>
<s>name</s>
<s>startsWith</s>
<ref>userAccountId</ref>
</new>
</list>
</map>
</invoke>
</Rule>
And have called this rule in Administrator Library (BuiltIn Lib) at toUsers Field as Value.
Please suggest me.

Hi,
<call name="LIB_Rules:getAllMatchUsers">
<map>
<s>userAccountId'</s>
<s>emp001</s>
</map>
</call>
I have used the above code to call rule, then it has not worked.
But by the below code its working fine. How ever, I don't know the reason (IdmVersion is 7.1).
<rule name='LIB_Rules:LEX_RUL_getAllMatchUsers'>
<argument name='userAccountId' value='emp001'/>
</rule>
Thanks,
Ravi.

HT1498 Horrible experience and the movie kept stalling through iTunes on appletv. Gave up (after paying for it) and ended up renting it through cable provider. Anyone know how to get $ back from apple?!

Horrible experience and the movie kept stalling through iTunes on appletv. Gave up (after paying for it) and ended up renting it through cable provider. Anyone know how to get $ back from apple?!

Issues are usually network related
What is your internet speed? www.speedtest.net
6mbps is required for instant HD (you can switch to SD in the settings)
If on wifi try ethernet and www.istumbler.net to rule out interference
Make sure you're using your ISP's DNS

Could anyone provide an easy ADF tutorial to go through from end to end

Could anyone provide an easy ADF tutorial to go through from end to end retrieving a table with parameter and display result as a table on web page. would like to learn EO, VO, AM page generation with this easy example.
Thanks

I've been using these
http://www.oracle.com/technology/products/jdev/11/cuecards111/index.html
I've done this one all the way through a couple times.
http://www.oracle.com/technology/obe/obe11jdev/bulldog/ria_application/developriaapplication_long.htm

Looking for a company that provides monthly IT related newsletters to end users

We looking for a company that provides good quality content each month to end users, helpful tips, etc.
I'm having a hard time finding one through search engines.
Did find one - http://www.itnewsforyou.com/
No idea what their newsletters look like, etc..
Would appreciate any referrals...
This topic first appeared in the Spiceworks Community

We looking for a company that provides good quality content each month to end users, helpful tips, etc.
I'm having a hard time finding one through search engines.
Did find one - http://www.itnewsforyou.com/
No idea what their newsletters look like, etc..
Would appreciate any referrals...
This topic first appeared in the Spiceworks Community

Everytime I get to the end of the software update for OS X 10.8.2 it says an error has occured and then restarts the download. I have also tried downloading from the website link provided in some other comments but it says image unmountable please help

Everytime I get to the end of the software update for OS X 10.8.2 it says an error has occured and then restarts the download. I have also tried downloading from the website link provided in some other comments but it says image unmountable please help

Perform a Permissions Repair using Disc Utility...
Verify or Repair Disk Permissions
Then Restart your Mac.
Next...
Go here > http://support.apple.com/kb/DL1581 and Download and Install the Combo Update.
After a Successful Install be sure to Restart your computer.

Provide the End user manuals

Hi,
If anybody provide the HR end user manuals from Recruitment to Payroll postings.
Regards
Devi

No teja,
I required End user manuals for all hr modules like recruitment to Payroll. i have to give training to endusers.
Check your gmail id.
Regards
Devi

Provide and End Provide....

Hi All,
I would like to know the Provide and End Provide usage and the syntax for the same.
Thanks in Advance,
Praveen

Hi Ashis,
Thanks for your reply here is my program
REPORT ZIBP_UPDATE_TECH_QUALS3.
DATA: BEGIN OF I_TECHS OCCURS 0,
        TECID TYPE BU_PARTNER.
        INCLUDE STRUCTURE BAPIRET2.
DATA: END OF I_TECHS.
DATA: V_TECID TYPE BU_PARTNER.
TABLES : BUT001.
SELECT-OPTIONS: S_TECIDS FOR BUT001-PARTNER.
SELECT PARTNER FROM BUT000 INTO TABLE I_TECHS
   WHERE TYPE = '1' AND
    PARTNER IN S_TECIDS.
DATA: V_ESADDRESS LIKE BAPIBUS1006_ADDRESS.
LOOP AT I_TECHS.
*first get country of technician
*the get conditions for the product for that country
*then validate the course,certificates requirement against possessed by technician.
CLEAR: V_ESADDRESS.
CALL FUNCTION 'BUPA_ADDRESS_GET_DETAIL'
   EXPORTING
     IV_PARTNER              = I_TECHS-TECID
IV_PARTNER_GUID         =
IV_ADDRNUMBER           =
IV_ADDRGUID             =
IV_VALDT                = SY-DATLO
   IMPORTING
     ES_ADDRESS              = V_ESADDRESS          .
IF V_ESADDRESS-COUNTRY = SPACE.
    I_TECHS-NUMBER = 012.
    I_TECHS-ID = 'ZLEN'.
    I_TECHS-TYPE = 'E'.
    MESSAGE E012(ZLEN) INTO I_TECHS-MESSAGE.
    MODIFY I_TECHS.
ENDIF.
DATA: I_SRV_CONDS LIKE ZIBP_QUAL_CONDI OCCURS 0 WITH HEADER LINE.
Types: begin of I_TEC_COURSES.
       include structure ZBUT0000HCZ0SY.
Types: end of I_TEC_COURSES.
DATA: I_TEC_COURSES LIKE ZBUT0000HCZ0SY OCCURS 0 WITH HEADER LINE.
DATA: I_TEC_CERTS LIKE ZBUT0000FAZ1S7 OCCURS 0 WITH HEADER LINE.
DATA: I_SRV_CONDS2 LIKE ZBUT0000F8FNVK OCCURS 0 WITH HEADER LINE.
SELECT * FROM ZIBP_QUAL_CONDI INTO TABLE I_SRV_CONDS
      WHERE COUNTRY = V_ESADDRESS-COUNTRY.    "AND PRODUCTID = PRODUCT.
SELECT * FROM ZBUT0000F8FNVK INTO TABLE I_SRV_CONDS2
      WHERE ZZBRAND_GROUP = I_SRV_CONDS-PRODUCTID.
*get Training courses, certificates here
SELECT * FROM ZBUT0000HCZ0SY INTO TABLE I_TEC_COURSES
      WHERE PARTNER = I_TECHS-TECID.
SELECT * FROM ZBUT0000FAZ1S7 INTO TABLE I_TEC_CERTS
      WHERE PARTNER = I_TECHS-TECID.
DATA: SRVDT_NUMC(14) TYPE N.
SRVDT_NUMC(8) = SERVICEDT(8).
SRVDT_NUMC+8(6) = '000000'.
DATA: THIS_COND_FAILED, THIS_COURSE_PASSED.
DATA: CURRENT_PROD LIKE I_SRV_CONDS-PRODUCTID.
DATA: THIS_PRODUCT_DONE.
SORT I_SRV_CONDS BY PRODUCTID.
LOOP AT I_SRV_CONDS.
    AT NEW PRODUCTID.
      CURRENT_PROD = I_SRV_CONDS-PRODUCTID.
      CLEAR: THIS_PRODUCT_DONE.
    ENDAT.
    CHECK THIS_PRODUCT_DONE = SPACE.
    CLEAR: THIS_COND_FAILED.
    DATA: TMSTMP_FROM LIKE I_TEC_COURSES-DATE_FROM,
          TMSTMP_TO LIKE I_TEC_COURSES-DATE_FROM.
    DATA: DAT TYPE D,   "tim TYPE t,
          TZ TYPE TTZZ-TZONE.
    TZ = 'UTC'.
    DAT = '00010101'.   "tim = '013000'.
    CONVERT DATE DAT INTO TIME STAMP TMSTMP_FROM TIME ZONE TZ.
    DAT = '99991231'.   "tim = '013000'.
    CONVERT DATE DAT INTO TIME STAMP TMSTMP_TO TIME ZONE TZ.
    DATA: WA1 LIKE I_TEC_COURSES.
    DATA: WA2 LIKE I_TEC_COURSES.
    DATA: WA3 LIKE I_TEC_COURSES.
    DATA: WA4 LIKE I_TEC_COURSES.
    DATA: WA5 LIKE I_TEC_COURSES.
    DATA: WA6 LIKE I_TEC_COURSES.
    DATA: WA7 LIKE I_TEC_CERTS.
    DATA: WA8 LIKE I_TEC_CERTS.
    DATA: WA9 LIKE I_TEC_CERTS.
    DATA: FLAG1(1) TYPE C,
          FLAG2(1) TYPE C,
          FLAG3(1) TYPE C,
          FLAG4(1) TYPE C,
          FLAG5(1) TYPE C,
          FLAG6(1) TYPE C,
          FLAG7(1) TYPE C,
          FLAG8(1) TYPE C,
          FLAG9(1) TYPE C.
    PROVIDE * FROM I_TEC_COURSES INTO WA1
                                   VALID FLAG1
                                   BOUNDS DATE_FROM AND DATE_TO
                                   WHERE COURSEID = I_SRV_CONDS-COURSE1
                                   BETWEEN TMSTMP_FROM AND TMSTMP_TO.
      WRITE: / WA1-DATE_FROM, WA1-DATE_TO, WA1-COURSEID, FLAG1.
      SKIP.
    ENDPROVIDE.
ENDLOOP.
ENDLOOP.

Year End 2010 notes provided by SAP

Hi Experts,
What are forms HR_F_W2_TP_TEMPS or HR_F_W2_SSCR_STS?
We only generate W2s paper forms. All the filiing is done by ADP. So I am not sure why would I require to use these. I would appreciate if you can provide some more information on the same.
SC

You may not require these notes for what they contain, but you still may require them because they could be a prerequisite to some other Note that would be published at a later date.
So, you could wait to import it, but if you have to import a Note relating to Year-End, you should also import all other YE Notes between your System Update and the YE Note you require.

I recently loaded OS 10.6.2. I can get on the internet but can't access email. I get a pop up that asks for my email passwd. I enter the passwd but it is rejected. My email provider checked everything from their end and said it was my software. Any ideas?

I recently installed 10.6.2, everything was fine for a few days. Last night I logged on to check email and got a new pop up window asking for my email account password. Its never came up before with the old OS or with the new OS prior to this point. I entered my password but it was rejected. After an 1 1/2 hours on the phone with my internet/email service provider it was determined that my password was good and the system was ok on their end. Access to the internet is not affected so I think its something wrong with the new OS. Any ideas?
thanks

Mac OS X v10.6: Mail.app won’t open, or "You can't use this version of Mail…" alert after installing Security Update 2012-004:
http://support.apple.com/kb/TS4424?viewlocale=en_US&locale=en_US
Fellow user Grant Bennet-Alder offers this solution:
Some users have reported this problem if the Mail Application has been moved out of the top-level /Applications folder, or duplicated in another location.
When the Security Update is done, the old version of Mail is disabled.
The solution has been to:
1) make certain Mail is in the /Applications folder
2) There is no other copy anywhere else.
3) Once steps 1 and 2 have been done, Manually download and re-apply the Security Update (2012-004) by hand.
Security Update 2012-004 (Snow Leopard)
If the Mail.app has been LOST, it can be re-installed by applying the 10.6.8 version 1.1 combo update. But this update is quite large and it is usually not necessary:
Mac OS X 10.6.8 Update Combo v1.1

Please bring to downgrade to iOS 6.1.3! iOS 7 seems like the macintosh ago ... the beginning of the end! Sorry, but then provides for all iPhone lovers, the classic design and unlimited use without fault love the previous version available. It's super tir

Please bring to downgrade to iOS 6.1.3!
iOS 7 seems like the macintosh ago ... the beginning of the end!
Sorry, but then provides for all iPhone lovers, the classic design and unlimited use without fault love the previous version available.
It's super tiring to work with iOS 7!

Submit your feedback to Apple here:
http://www.apple.com/feedback

PROVIDE END PROVIDE

Similar Messages

Maybe you are looking for