HR Master Data Use for other SAP Modules?

Which part of SAP HR Master Data can be used by various SAP modules including PP, SD, MM, PS, FI, etc?
Expecting expert input!

Which part of SAP HR Master Data can be used by various SAP modules including PP, SD, MM, PS, FI, etc?
Expecting expert input!
Hi
The following may be useful try this out
PP try this tcode and surf on HRMS-CR02 there u can bring the pernr to workcentre
SD Try T Code VPE1 and u can assign the sales personnel using pernr
MM Try T Code XK01 Create employee as vendor and u can use it for Vendor consignment goods via MSK3
FI In fi u can create vendor like mm using FK01 for bulk amount distribution
Hope it helps
with regards
partha

Similar Messages

Master Data Governance & Implementation of SAP Master Data Objects

I would like to get hold of a case study on Master Data Strategy Governance Framework and Implementation of governance processes for Master Data Objects acrosss all SAP Modules. Governance processes do not have to use SAP MDM for master data management.
If any one in SAP community has implemented Master data governance, I would like to benefit from their experience and hence the request

Hello,
Not sure what sampling approach is, but it certainly help build a business case if you can provide sample data and case studies.
You may refer the SAP Provided PDF and presentations, to build your Business Case.
[SAP MDG|http://www.sap.com/solutions/enterprise-information-management/master-data-management/master-data-governance/index.epx]
Regards,
Abhishek

Insert new Master Data Record for an InfoObject using a Function Module

Hi @ all,
is there any Function Module for creating a new master data record for an InfoObject? Implementing a FM for inserting a master data record into a master data table is done quickly. I think there will be problems with inconsistency implementing a FM using a simple "Insert" Statement. Isn´t it?
I know it is possible to maintain an InfoObject in RSA1 (Master data IO> right click>Maintain Master data>execute(F8)> ...) but I have another requirement for using a FM.
Thanks!
Regards,
Johannes

use this
RSNDI_MD_ATTRIBUTES_UPDATE

Can I use export my SAP created master data in a non-SAP system?

Hello,
I am about to start a large integration solution with my SAP customer and they are concerned about licensing. What they want to do is export their GL, cost centre and WBS master data to an external system via integration (probably custom ABAP, or home built BAPI/RFC). The external system then uses the accounting data to determine where to post FI or MM documents back into SAP via custom ABAP, BAPI or maybe IDOC).
Is this OK? Are there any licensing issues with master data used externally and posted back in via custom ABAP or standard BAPIs/IDOCs?
Thank you in advance,
Geoff

Hello Geoff,
Yes, even indirect access to SAP transactions or data needs to be licensed properly with SAP. Your customer should contact their SAP account rep to discuss the exact use case. Indirect access via certain types of certified integrations may qualify for Platform User License pricing, but there is no generic answer, and it is best for the customer to discuss their specific case directly.

SAP fixed asset add-on. Not able to import master data using upload pgm.

Hi all,
I am trying to import fixed asset master data using an excel file into sap B1 2007a patch level 42. I am able to run the import transaction. It tries to process and then giving me a message ' Import end: Number of successfully imported assets: 0. Number of processed assets:2. We have looked at the event log file and couldn't find anything related to the upload. I have gone through other posts and didn't face this issue. Any hellp is apreciated.
Path which I am using to upload the fixed asset master master data: Administration --> Setup --> fixed asset --> import fixed asset master data.
Following points (see below) also taken into account while creating the master data sheet.
also replaced the ',' in the csv file to ';' before uploading and changed the fixed asset mode to 'transfer' in the administration --> system initialization > company detaills> basis initialization.
Thanks
Johnson zavier
Mandatory:     Item Code = Asset Class; this Asset Class must be previous defined in the Asset Settings (don't change/delete anything in the item-master data - there are the Asset Classes Z-00u2026. Are stored
     Description = Description of this Asset
     Capitalization Date = do it like this (YYYY-MM-DD). This columne must be a text format
     APC = Aquisition/Procuction Cost; when you have digits after coma please use dot for separation - don't use thousand separators; Example 23444.45
     Quantity = only mandatory, when you use the same assets stored under one asset number. Example you have ten equal chairs, so you can handle this with one asset number and quantity ten
     Dep01 = Depreciation area; this entry must be previous defined in the Asset Settings
     Depr Start date 01 = do it like this (YYYY-MM-DD). This columne must be a text format. The beginning must be the first of the month. Please compare it in this case with the capitalization date
     Useful Life 01 = calculated in months (not years)
     Remaining Life 01 = calculated in months (not years)
     Depr Type 01 = Depreciation Type must be previous defined in the Asset settings
     Ordinary Depr 01 = ordinary depreciation; this is the comulated value you can see in the asset history sheet from the old asset solution. When you have digits after coma please use dot for separation - don't use thousand separators; Example 23444.45
     Unplanned Depr 01 = unplanned/extraordinary depreciation; this is the comulated value you can see in the asset history sheet from the old asset solution. When you have digits after coma please use dot for separation - don't use thousand separators; Example 23444.45
     SpDpAcc1 01 = Special depreciation account; when you use special depreciations and you have it to balance on special accounts fill in this account. This is an exeption - in normal projects not needed
     SpDpKey2 01 = Special depreciation; when you use special depreciation you have to enter this cumulative value in this field. This is an exeption in normal projects not needed
     SpDpAccu2026 = for further special depreciation accounts; This is an exeption
     SpDpKey.. = for furhter special depreciation values; This is an exeption
Optional:     Vendor Code = when using this please be aware that the vendor code is previous defined in the system
     all others = you can use if you want. The only limitation is the type/length of these fields
     When you are ready with your entries mark from the first free row on for instance the next 20 rows than right mouse key - delete rows. This is necessary to prevent that in the background are invisible signs
     After entering in this default excel all your assets, please save it as .csv file. (the grey message - relation to information of csv - please say yes; when you close than excel a furhter message - would you save.. - please say no now
     After entering all data please save it as .CSV file. First grey window (format information) please choose 'yes'. Second window (when you close this file) please choose 'no'.
     You have now a .csv file in hands right now for uploading into the fixed assets.
     This example you can use for a test-import based on the year 2004

The issue was because of the conflict of Depr. Start Date, Use Life and Remaining Life. After I corrected the data, it worked just fine. The note 876670 helped me to resolve this issue. Thanks to Adam at Toronto SAP Business one support for his expert analysis and suggestions.
thanks
johnson zavier
Edited by: Johnson Zavier on Feb 19, 2009 11:10 PM
Edited by: Johnson Zavier on Feb 19, 2009 11:20 PM

Master data Load for Substance Creation : Using BAPI in LSMW ?

Hi ,
Had any one did a Master data load for creating a Substance in SAP RM. If so please let me know the best possible option. I am beeing trying to figure out the option to load Substances and its IDENTIFIER / MATERIAL ASSINGMNET from my legacy system. But I am not geeting a clue to use LSMW. ( Direct or BatchInput )
I am not seeing any BAPI for uploading it through the LSMW except the one BUS1077 ( method SAVEREPMUL ) and I guess this is used along with IDOC.
Appreciate your help and suggestion.
David

Thanks John.
I will try this option what you have suggested. Even I told by business team to look for CG33. But they were been telling me some format issue. Probably they would meant the same what you have said. But they were not aware of work around for this. your information is intresting.
The other option given to me was to create a recording for each and every Tab like Substance header / Identifier / Material assignment etc. seperately. Technically I don't feel good to create in that way. Do you think that is alernate approach.?
With Respect & Regards
David

Why we create settlement profile. What master data must exist in sap before creating settlement profile for order.

Why we create settlement profile. What master data must exist in sap before creating settlement profile for order.

As mentioned above, settlement is to post the cost to cost centers or any possible receivers as per the settlement profile. PM / Service orders, WBS elements, etc., can be temporary cost bearers from which cost should be settled to some permanent receivers.
Cost elements / Cost element groups should be available as Master data before configuring settlement profile.
To answer your latest query, there are 2 type of cost centers.
Sender Cost Center - Against this, labor / internal activity price will be maintained in KP26. This cost center will be maintained in PM / PP work centers. While creating PM / PP orders, one of the work centers & activity types will be mentioned. Based on the KP26 entry for the combination of Activity type & Sender cost center, price will be picked & calculated according to work hours / labor hours maintained in PM / PP orders.
Receiver Cost Center - Receiver cost center is the department / location cost center to which cost should be settled. Only receiver cost center will be maintained in settlement profile. Sender cost centers will be picked up automatically from work center.

HT4623 I still can't update, i get error 3252 every time, after over 500mb is downloaded, not happy to waste all the data i could use for other things

I still can't update, i get error 3252 every time, after over 500mb is downloaded, not happy to waste all the data i could use for other things.
is there another way i can download the update? it just never work, tried multiple time

The most common causes are:
Your antivirus, firewall or router security is blocking access to Apple's servers - try temporarily disabling them - if you have Kaspersky this is definitely the problem
At some time in the past you used this computer to jailbreak, unlock or otherwise hack ANY iPhone, iPod Touch or iPad - if this applies to you your hosts file is corrupt and you will have to edit it and remove any lines that contain "gs.apple.com"

Error while importing Item MAster Data using DTW

Hi,
when we are importing item master data using items template
it is giving error.
Error:":connected value 1 was not found "
can any one send the oitems template that is working fine wthout any error.
Thanks,
Neetu

You cannot import data prepration templates>>Testcase1_Test Data for Import function>Oitems directly.
You will have to do certain prerequisites like setting CommissionGroup, CommissionPercent, CommissionSum,CustomsGroupCode etc., in SAP before importing Items.
So I would like you to try out with minimum fields in the template and import. After understanding, you can import the required fields.
I suggest you to use the template from "C:\Program Files\SAP\Data Transfer Workbench\Templates\Templates\oItems"

Track Master Data Changes for Multiple countries

Hi experts,
I am in a Global HR Implementation & Rollout Project. We are creating Outbound Interfaces for 3 countries to export pay, time and general data to the 3rd party systems in those local countries. (Payroll is outsourced there).
As well as sending New Joiners data every month, we need to send Changers data also to all those 3rd partys every month before the Payroll runs.
I know 2 solution for this :
a). Using Change Documents - Tcode : SCDO ..etc
b). Using the report RPUAUD00.
c). Using RBDMIDOC.
Query :
1). Are these the only solutions ?
2). Whats the best solution for doing this for a Global Rollout project ? I need to track master data change for different countries for different set of Infotypes and fields. I need to send those Changers data as well as the New Joiners data through the Outbound Interface to all the local countries.
This year we are doing for 3 countires, next year for 9 more countries, etc. Whats the best solution keeping this in mind ?
Restrictions :
1). Our Client HRs dont want us to disturb the report RPUAUD00 as they use that regularlly and want the flexibility to configure the configs themselves.
2). If I must need to create and activate Change Documents for ALL individual fields, is there an easy way of doing this ?
3). I need to send this Changers data from SAP to Legacy system, so dont know if RBDMIDOC will be a good solution for this. Any comments ?
Just want the best possible and feasible solution for this issue.
I will be please to allot point to anyone who gives a good solution.
Moreover will be Thankfull also !!
Cheers.

Please try with transaction code "PC00_M02_LINF0"
Cheers
Suresh.KK

HR ABAP : Track Master Data changes for multiple countries

Hi experts,
I am in a Global HR Implementation & Rollout Project. We are creating Outbound Interfaces for 3 countries to export pay, time and general data to the 3rd party systems in those local countries. (Payroll is outsourced there).
As well as sending New Joiners data every month, we need to send Changers data also to all those 3rd partys every month before the Payroll runs.
I know 2 solution for this :
a). Using Change Documents - Tcode : SCDO ..etc
b). Using the report RPUAUD00.
c). Using RBDMIDOC.
Query :
1). Are these the only solutions ?
2). Whats the best solution for doing this for a Global Rollout project ? I need to track master data change for different countries for different set of Infotypes and fields. I need to send those Changers data as well as the New Joiners data through the Outbound Interface to all the local countries.
This year we are doing for 3 countires, next year for 9 more countries, etc. Whats the best solution keeping this in mind ?
Restrictions :
1). Our Client HRs dont want us to disturb the report RPUAUD00 as they use that regularlly and want the flexibility to configure the configs themselves.
2). If I must need to create and activate Change Documents for ALL individual fields, is there an easy way of doing this ?
3). I need to send this Changers data from SAP to Legacy system, so dont know if RBDMIDOC will be a good solution for this. Any comments ?
Just want the best possible and feasible solution for this issue.
I will be please to allot point to anyone who gives a good solution.
Moreover will be Thankfull also !!
Cheers.

I have used PU12 for same purpose at a similar client. It will fulfill all your needs I guess, but the learning curve is big. Search for "Interface Toolbox" or "PU12". Basically your search will end-up in these two links:
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAXX/PYSOME_INTERFACE.pdf
HR Interface Toolbox - PU12

How are attribute and text master data tables linked in SAP R/3?

Hello,
how are attribute and text master data tables linked in SAP R/3?
Most tables with attribute master data like T001 for company codes,
have a text master data table T001T (add "T" to table name).
When looking at the content of table T001 via transaction se11,
the text are automatically joined.
But for some tables there is no "T"-table (e.g. table TVBUR for sales offices
has no text table TVBURT), but in se11 you get texts. There is an address
link in TVBUR, but the Name1, etc. are empty.
a) Where are the text stored?
b) How does the system know of the link?
Hope someone can help!
Best regards
Thomas

Hi Thomas
The master and text table are not linked by name, of course, if you see the text table, it has the same key fields of master table, only it has the field key spras and the field for description.
The link beetween the tables is done by foreign key: if you check the text table TVKBT u need to see how the foreign key for field VKBUR is done:
-> Foreing key with table TVBUR
-> Foreing key field type -> KEY FIELD FOR A TEXT TABLE
->Cardinality-> 1-:CN
It's very important the attribute sets for Foreing key field type, if it's KEY FIELD FOR A TEXT TABLE, it'll mean the table is a text table: i.e. that mean the master table is a check table for the text table, where the foreign key type is for text table.
U can find out the text table of master table by SE11: GoTo->Text Table
U can fined some information in table DD08L.
Max

How to upload different views of customer master data using LSMW-IDOC

I need to upload customer master data using LSMW Idoc method for my client. Now customer will have different views like main view, Sales data, Company code data, Partner function data etc. And except main data all other data can be multiple for each customer. We are going to upload data from tab delimited .TXT file. Should I propose different LSMW for upload different views for the customer from different .TXT files? or we can upload all the customer related data (like main view data and partner function data )from a single .TXT file. Kindly suggest which one in convenient and how we can prepare the data file in both cases.

convinient is the method that you can handle.
but as the guy who loads the data you have to load the data like they are available, like it is convinient for others to prepare the data.
In general there is no problem to use an IDOC method to load a customer master with multiple comany codes and several sales orgs in one shot.
the data can be in one source file, but need then to be maintained in a certain way
Example1: all data in 1 structure
GD1 - CC1 - SO1
GD1 - CC2 - SO2
GD1 - CC2 - SO3
in this case the GD (general data) is redundand in each line which has different Company code data or different Sales Org data
Example2: all data in 3 sturcures but one file
GD1
.CC1
.CC2
..SO1
..SO2
..SO3
Example3: data delivered in 3 files - you join the files in LSMW, they must have a common identifier like the old customer number in the beginning of each file
FILE General data:
GD1
GD2
GD3
file Compamy code data:
CC1
CC2
CC3
file Sales org data:
SO1
SO2
SO3
LSMW is flexible and can handle each of this scenarios, are you flexible too?

I am unable to upload the customer master data using BAPI.?

Hi Guru's,
i am unable to upload the customer master data using BAPI.(BAPI_CUSTOMER_CREATEFROMDATA1)
Please guide me how upload the data...
Thanks in iadvance
Srinivas...

Hello Srinivas
This BAPI does not allow to create a new customer from scratch but only to copy an existing customer to a new one and change its address data.
The reference customer has to be provided using IMPORTING parameter PI_COPYREFERENCE. See also the BAPI documentation for more details.
The BAPI does the same like transaction XD01 with Reference.
Regards
Uwe

HR Master Data using ALE

Hi Guys,
Can you tell me how to pass all HR Master Data using ALE and IDOC to one system to another (outbound transaction). This will automatically generate outbound Idocs every time an applicable reference data record is created and/or changed in SAP HR system. I dont have any experience using ALE your help will be appreciated. Points will be given
Thanks.

Hi,
The program to transfer HR Master Data it is RHALEINI transaction PFAL, this program run in HR system to send information with message type HRMD_A.
Yoy need
Distribution model (BD64),
RFC Destination (SM59 )
Partner profiles (WE20)
Logical system (SM30) V_TBDLS
I hope this help you.

HR Master Data Use for other SAP Modules?

Similar Messages

Maybe you are looking for