Provisioning an user to modify one specific dimension

Hi,
is it possible to provision an user to let him modify members on only one dimension?
Thanks!

Juan,
This not possible if you are talking about planning Application. The user should have admin access to change any member property.
-Tarini

Similar Messages

How do I setup multiple users to use one source but manage playlists separately? For example, play counts are specific to each user.

How do I setup multiple users to use one source but manage playlists separately? For example, play counts are specific to each user.

Hi,
Thank you for posting in Windows Server Forum.
Here adding to the words of “Tim”, a forwarder is a DNS server on a network used to forward DNS queries for external DNS names to DNS servers outside of that network. You can also forward queries according to specific domain names using conditional forwarders.
A DNS server on a network is designated as a forwarder by having the other DNS servers in the network forward the queries they cannot resolve locally to that DNS server. You can refer information regarding forwarders and how to configure from beneath link.
Understanding forwarders
http://technet.microsoft.com/en-us/library/cc782142(v=ws.10).aspx
Configure a DNS Server to Use Forwarders
http://technet.microsoft.com/en-us/library/cc754941.aspx
Hope it helps!
Regards.

How to only synchronize one specific LDAP user group with SAP?

Hi,
Hopefully this is the correct forum to post this in. I want to have continuous one-way synchronization of users from my LDAP server to my SAP central system. I've started configure in SAP using transaction SM59 and LDAP. Can I somewhere set that only one specific LDAP user group shall be transferred to SAP (they do not need to be assigned to any specific group, profile, role in SAP) - or should this be done on the LDAP server side (or is it at all possible)?
Correct me if I'm wrong, but the User Group field in the report RSLDAPSYNC_USER only concerns SAP user groups right? This would therefore not be sufficient since I want to select the users to synchronize based on user groups in the directory.
Thanks, Oscar

We've used a repository constant to specify the LDAP filter for reading users / groups from the LDAP target.
E.g. LDAP_FILTER_USERS (&(objectCategory=person)(objectClass=user))
Then we also have a constant for the LDAP_STARTING_POINT
For our AD Group Initial Load we filter according to these settings:
LDAP_FILTER_GROUPS = (objectclass=group)
LDAP_STARTING_POINT_GROUPS = ou=IDMManagedGroups,ou=Groups,dc=cfstest,dc=le,dc=ac,dc=uk
The above example only reads AD groups starting at the specified OU
Then in a Job From LDAP Pass the LDAP URL looks like this:
LDAP://%$rep.LDAP_HOST%:%$rep.LDAP_PORT%/%$rep.LDAP_STARTING_POINT_GROUPS%?*?SUB?%$rep.LDAP_FILTER_GROUPS%
I hope this helps
Paul

Forbid a user group to modify an specific metadata field??

Is it possible to forbid a user group to MODIFY an specific metadata field or group of fields?
I know you can create a new metadata SET and forbid the user group to modify the entire set, but what about groups or fields??
Any help is welcome

it is not possible. I had a sort of work around, when I enabled the metadata group only on the production creation, but then it is not visible in Metadata tab.

Xsl for removing specific nodes and modifying one node.

Hello,
i have the urgent need to remove specific nodes
and modify one node in my XML.
the xml as input :
<?xml version="1.0" encoding="utf-8"?>
<PLOT>
<REQUEST>
<GET_LAYOUT>
<PROPERTIES>
<MAPNAME name="xxxx" />
</PROPERTIES>
<DATAFRAME id="MAIN">
<LAYERLIST>
<LAYERDEF id="0" visible="false" query="" />
<LAYERDEF id="1" visible="false" query="" />
<LAYERDEF id="2" visible="false" query="" />
<LAYERDEF id="3" visible="false" query="" />
<LAYERDEF id="4" visible="false" query="" />
<LAYERDEF id="5" visible="false" query="" />
<LAYERDEF id="6" visible="false" query="" />
<LAYERDEF id="7" visible="false" query="" />
<LAYERDEF id="8" visible="false" query="" />
<LAYERDEF id="9" visible="false" query="" />
<LAYERDEF id="10" visible="false" query="" />
</LAYERLIST>
<MAPSERVICELIST>
<MAPSERVICEDEF service="BASEMAP" >
<LAYERLIST>
<LAYERDEF id="2" visible="True" query="" />
<LAYERDEF id="1" visible="False" query="" />
</LAYERLIST>
</MAPSERVICEDEF>
<MAPSERVICEDEF service="MAP1">
<LAYERLIST>
<LAYERDEF id="4" visible="True" query="" />
<LAYERDEF id="3" visible="True" query="" />
<LAYERDEF id="2" visible="True" query="" />
<LAYERDEF id="1" visible="False" query="" />
</LAYERLIST>
</MAPSERVICEDEF>
</MAPSERVICELIST>
</DATAFRAME>
</GET_LAYOUT>
</REQUEST>
</PLOT>
what i want to have is:
<?xml version="1.0" encoding="utf-8"?>
<PLOT>
<REQUEST>
<GET_LAYOUT>
<PROPERTIES>
<MAPNAME name="xxxx" />
</PROPERTIES>
<DATAFRAME id="MAIN">
<LAYERLIST>
<LAYERDEF id="6" visible="True" query="" />
<LAYERDEF id="5" visible="True" query="" />
<LAYERDEF id="4" visible="True" query="" />
<LAYERDEF id="3" visible="False" query="" />
<LAYERDEF id="2" visible="True" query="" />
<LAYERDEF id="1" visible="False" query="" />
</LAYERLIST>
<MAPSERVICELIST/>
</DATAFRAME>
</GET_LAYOUT>
</REQUEST>
</PLOT>
as you see, <MAPSERVICELIST/> is empty and <LAYERLIST> contains all <LAYERDEF> of <MAPSERVICEDEF>/<LAYERLIST>
The ones of BASEMAP are kept unchanged but the ones of MAP1 are having a new attribute value for id.
Thanks four your help.
Regards.

You can implement very straightforward map in BizTalk like below:
If you are interested in XSLT of this map, I copied below which visual studio gave me when i validated the map:
<?xml version="1.0" encoding="UTF-16"?>
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:msxsl="urn:schemas-microsoft-com:xslt" xmlns:var="http://schemas.microsoft.com/BizTalk/2003/var" exclude-result-prefixes="msxsl var" version="1.0">
<xsl:output omit-xml-declaration="yes" method="xml" version="1.0" />
<xsl:template match="/">
<xsl:apply-templates select="/PLOT" />
</xsl:template>
<xsl:template match="/PLOT">
<PLOT>
<REQUEST>
<GET_LAYOUT>
<PROPERTIES>
<MAPNAME>
<xsl:if test="REQUEST/GET_LAYOUT/PROPERTIES/MAPNAME/@name">
<xsl:attribute name="name">
<xsl:value-of select="REQUEST/GET_LAYOUT/PROPERTIES/MAPNAME/@name" />
</xsl:attribute>
</xsl:if>
<xsl:value-of select="REQUEST/GET_LAYOUT/PROPERTIES/MAPNAME/text()" />
</MAPNAME>
<xsl:value-of select="REQUEST/GET_LAYOUT/PROPERTIES/text()" />
</PROPERTIES>
<DATAFRAME>
<xsl:if test="REQUEST/GET_LAYOUT/DATAFRAME/@id">
<xsl:attribute name="id">
<xsl:value-of select="REQUEST/GET_LAYOUT/DATAFRAME/@id" />
</xsl:attribute>
</xsl:if>
<LAYERLIST>
<xsl:for-each select="REQUEST/GET_LAYOUT/DATAFRAME/MAPSERVICELIST/MAPSERVICEDEF">
<xsl:for-each select="LAYERLIST/LAYERDEF">
<LAYERDEF>
<xsl:if test="../../../../LAYERLIST/LAYERDEF/@id">
<xsl:attribute name="id">
<xsl:value-of select="../../../../LAYERLIST/LAYERDEF/@id" />
</xsl:attribute>
</xsl:if>
<xsl:if test="@id">
<xsl:attribute name="id">
<xsl:value-of select="@id" />
</xsl:attribute>
</xsl:if>
<xsl:if test="../../../../LAYERLIST/LAYERDEF/@visible">
<xsl:attribute name="visible">
<xsl:value-of select="../../../../LAYERLIST/LAYERDEF/@visible" />
</xsl:attribute>
</xsl:if>
<xsl:if test="@visible">
<xsl:attribute name="visible">
<xsl:value-of select="@visible" />
</xsl:attribute>
</xsl:if>
<xsl:if test="../../../../LAYERLIST/LAYERDEF/@query">
<xsl:attribute name="query">
<xsl:value-of select="../../../../LAYERLIST/LAYERDEF/@query" />
</xsl:attribute>
</xsl:if>
<xsl:if test="@query">
<xsl:attribute name="query">
<xsl:value-of select="@query" />
</xsl:attribute>
</xsl:if>
</LAYERDEF>
</xsl:for-each>
</xsl:for-each>
<xsl:value-of select="REQUEST/GET_LAYOUT/DATAFRAME/LAYERLIST/text()" />
</LAYERLIST>
<MAPSERVICELIST>
<xsl:text> </xsl:text>
</MAPSERVICELIST>
<xsl:value-of select="REQUEST/GET_LAYOUT/DATAFRAME/text()" />
</DATAFRAME>
<xsl:value-of select="REQUEST/GET_LAYOUT/text()" />
</GET_LAYOUT>
<xsl:value-of select="REQUEST/text()" />
</REQUEST>
</PLOT>
</xsl:template>
</xsl:stylesheet>
You can highlight the issue if you have any specific one.
Please mark it as Answer if this answers your question
Thanks.
Mo
The contents I write here is my personal views, not the view of my employer and anyone else.

Owner on Sales Order Defaulting to One Specific User

When entering a Sales Order, the Owner is defaulting to the Salesrep but only for one specific rep and their BPs. If a Sales Order is entered for any BP other than the ones for this particular rep, the Owner is correctly populated with the User entering the order but. What could be causing this? There is no formatted search on the field

Hi Christian,
In the marketing documents
Owner displays the current SBO User who has performed the transaction. The user should be registerd in the employee master data and the User code should be mapped which will refresh the owner code once the BP is selected.
Buyer (Purchase )/ Sales employee (Sales) here the data is retreived from the employee mapped to the Business partner master data BP Masterdata --> General --> Field : Sales employee (Customer), Buyer ( Supplier) . i.e, an Employee when assigned to particular BP's
Ex. If in the Purchase document you select a BP and he has EMP1 mapped in the buyer code it will be assigned with EMP1 in the purchase document and the user entering the data will be updated in the owner code
Regards,
Rakesh N

One user can't see presence and send IM to one specific colleague

Hi there
One of our J4W users have a very strange issue, but it's only affected that user (at least what I know of).
The user can't see presence status or send a IM to one specific user. If she tries to send a PM, she gets this message: "Message to <person> could not be delivered".
However, she can see presence and send IM's to other users just fine.
I have tried with version 9.1.2/3 . I have not seen this issue on other users.
J4W 9.1.X
Windows 7 Enterprise 32 bit
CUP: 8.6.2.10000-44
CUCM: 8.6.2.22900-9
AD 2008 R2
Is this also a J4W software defect or what could it be?
Thanks
Kristian

Hi both of you.
Yes you are right, our CUP domain is not the same as our email domain. I guess I have to change the CUP domain then. Do you know any guides to do this? I guess I have to restart the CUP server after changing domain?
We are also seeing inconsistences that can arise from adding Outlook contacts, so this should solve alot of issues for us.
I hope it will fix the issues
Thanks

Error when provisioning the user in SAP system.

Hi,
I am trying to provision a user for a SAP system from SAP IDM Netweaver.
I am geeting error message as below.
boldputNextEntry failed storingB19253
Exception from Add operation:com.sap.idm.ic.ToPassException: Password is not long enough (minimum length: 7 characters)
Exception from Modify operation:com.sap.idm.ic.ToPassException: User B19253 does not exist Internal error: FM SUSR_USER_READ, exception: 1 Inconsistency with addressbold.
This is happening only with this user. All other users are getting provisioned properly.
Some one please tell why this is happening and let me know if more information is needed.

Hi
Can you post some more info
What is your password policy on the identity store?
Do you have a minimum length of 7?
How long is this users password?
Thanks
Roy Tronstad

The kerberos PAC verification failure when all users of only one RODC Site, trying to get access iis webpage of different site using Integrated Windows Authentication

The kerberos PAC verification failure when all users of only one Site which having only one RODC server(A), trying to get access iis webpage of different site which having WDC server(B) using Integrated Windows Authentication. But when they accessing the
website using IP address, it is not asking for credentials as I think it is using NTLM Authentication at that time which is less secure than Kerberos.
Note that:- All user accounts and Computers of the RODC has been allowed cache password on the RODC. Nearest WDC for the RODC (A) is the WDC (B).
The website is hosted on a windows server 2003 R2 and generating below system event log for those users of the RODC site :-
Event Type: Error
Event Source: Kerberos
Event Category: None
Event ID: 7
Date:
<var style="color:#333333;font-family:'Segoe UI', Arial, Verdana, Tahoma, sans-serif;font-size:13px;line-height:normal;">date</var>
Time:
<var style="color:#333333;font-family:'Segoe UI', Arial, Verdana, Tahoma, sans-serif;font-size:13px;line-height:normal;">time</var>
User: N/A
Computer:
<var style="color:#333333;font-family:'Segoe UI', Arial, Verdana, Tahoma, sans-serif;font-size:13px;line-height:normal;">computer_name (the 2003 server)</var>
Description: The kerberos subsystem encountered a PAC verification failure. This indicates that the PAC from the client<var style="color:#333333;font-family:'Segoe
UI', Arial, Verdana, Tahoma, sans-serif;font-size:13px;line-height:normal;">computer_name</var> in realm <var
style="color:#333333;font-family:'Segoe UI', Arial, Verdana, Tahoma, sans-serif;font-size:13px;line-height:normal;">realm_name</var> had
a PAC which failed to verify or was modified. Contact your system administrator.
This issue has been raised for last one week. Before that everything was fine. No Group Policy changed, Time also same.
In this situation do I need to do Demotion of the RODC and re-promote it as RODC again or is there any other troubleshooting to resolve it.
Thanks in Advanced
Souvik

Hi Amy,
Thanks for your response
I noticed that Logon server could become incorrect again after user re-login or restart of a workstation.
It seems root cause is different. Need a permanent solution.
The Workstations of the RODC site are getting IP from a DHCP server by automatic distribution of IP from a specific subnet for the site only. The RODC is
the Primary DNS server for the site.
I have checked the subnet and it is properly bound with only with that AD site. The group of users and workstations are in the same site AD organisational Unit.
Sometime I restarted the NET LOGON service and DNS server service on ther RODC server and sometime rebooted the server. But the Logon server issue has not fixed permanently.
The internal network bandwidth of the site is better than the bandwidth to communicate with other site.
The server is Windows server 2008 R2 standard and hosting the below roles
RODC
DNS
File server
The server performance is Healthy in core times when maximum users usually logins.
Any further support would be much appreciated Amy
Thanks
Souvik

Crop to specific dimensions?

Is there a way to crop to a specific dimension? I have a 3888x2592 image and would like to crop it to 2400x1600. Problem I am having is I can get it to 2388x1589 or 2420x1619 or finally after many tries (over a minute of attempting) got it to 2399x1599. Is there any way to FORCE it to a specific dimension?
Also, on export I know you can resize an image, but are you able to apply a resize within lightroom itself? Can't think of a situation where I would want to do that, but just out of curiousity...
Thanks,
Clayton

I agree with Andrzej007. Sometimes I need a 1:1 crop
First, to those who ask, "Why not do it during export?" Or worse, "Why would you want to do that?"....   Does it REALLY matter to you WHY I want to do a crop of a specific number of pixels? The fact is some people really need this.
I do a lot of timelapse stuff and build videos at 1920x1080. I shoot full frame (in my case that is 4608x3456). I correct my shots in LR. So, what's the best way to get my images to 1920x1080?
Here's an example image:
Well, I could crop with a fixed aspect ratio (which is 16:9) and then export with a resize to 1920x1080, which would give me this:
Of course I can crop a smaller portion of the image, and then on export resize down to 1920x1080.
But what about cropping to exactly 1920x1080 at a true 1:1 pixel crop (without resizing down)?
So to crop this image...
... and end up with this....
... I would need to "guess" at the size, release the mouse and check (with informaion overlay turned on). Then do it again. And again. And again.....until I got it exactly at 1920x1080. That's a royal pain in the rear.
In Photoshop I can use the Marquee tool and define exactly 1920px x 1080px and then go to Image > Crop:
But in LR there is NO way to define actual pixels. Seems like it would be fairly easy to do, since you can already enter in a custom aspect ratio. Just add something like a little checkbox in the custom aspect ratio box. Something like this:
Or make it a set of radio buttons with the ability to choose between aspect ratio and actual pixels. (And rename the setting to "Custom Dimmensions" instead of "Custom Aspect Ratio".
JimHess raised an interesting issue (emphasis added):
In Lightroom, photo dimensions is part of the export function, not the editing. You cannot specify a size in the develop module. You are going to have to modify your workflow. Crop to the 2:3 aspect ratio, and then export with the long side set to 2400 pixels. That's the way it works. Otherwise, you would have to have a separate image for every purpose. The whole idea (for me, at least) is to have one master image that I can use for any purpose. Then I use the export function to customize the copy for whatever purpose I need.
Is this true? Doesn't seem to make any sense to me. Here is some sample crop metadata that LR saves:
   crs:CropTop="0.232327"
   crs:CropLeft="0.587547"
   crs:CropBottom="0.541667"
   crs:CropRight="1"
   crs:CropAngle="0"
   crs:CropConstrainToWarp="0"
So LR is saving information about 3 corners (don't really need the 4th). That's it. So it should absolutely be doable to define a specific number of pixels to crop to instead of an aspect ratio. The software will still write the same resulting metadata - the location of each of the three corners.
So then, why not just do what other people suggest? Why crop to whatever portion of the image I want and then resize to 1920x1080 on export?
Well, as Jim said, the whole idea behind LR is to have a single master image that I can use in a whole bunch of ways. So I can make virtual copies to do other kinds of crops. But exporting? That actually means I'm creating "a separate image" for the purpose of doing a timelapse.
See, as it stands right now, I can make all my changes in LR, and then import the RAW files into After Effects, and AE will read the metadata from the file and apply it. So if I get my crop right in LR (set exactly to 1920x1080) then I can simply import the RAW files and AE will see the footage at the right size. No need to render before importing, and no scaling needed, which improves the render time. I don't need to create a whole new set of exported images that eat up storage space. And I can easily go back in and make an adjustment to my crop in LR, then switch over to AE and reload the sequence. It'll instantly update, with no need to re-export from LR.
See, THAT's the power of LR. Exporting is great when you're at the END of your workflow, and for me, LR is just the first step in a long post production workflow.
Edit: Of course sometimes I don't need 1:1 pixel crops; sometimes I'll want to resize. In these cases I'll set my crop using a set aspect ratio and then deal with the resizing in After Effects, avoiding the need to render twice (because I still don't need to export from LR to use the RAW files in AE).

Changing proposed delivery date in sales order for one specific sales org

Hi All,
I want to change proposed delivery date in sales order automatically for one specific sales org only without changing lead time in VOV8.
For that can I use MV45AFZZ. But it is asking access key to make changes. Is there any other user exit for the same. And how does exactly change it.
Thanks in advanced.
Points will be awarded.
Regards,

EXIT_SAPFV45E_001 has nothing to do with this - it is meant to update the purchase order from a sales order. It might not even be triggered if the sales order has no link to a purchase order.
USEREXIT_SAVE_DOCUMENT is not really good for this either, because the delivery date has to be changed before that. If memory serves, it also influences the schedule lines and probably the ATP check and such. I would strongly advise against it. One of the other routines in MV45AFZZ should do just fine, USEREXIT_MOVE_FIELD_TO_VBAK for example.

How to find user exits for a specific field

hi,
    How can we find a user exit for a specific fields .
as i know Three ways to search user-exits
1. SE80 look includes in a packages with name user-exits
2. by zreport which will fetch user-exit in a T-CODE
3. SMOD
but what if we have to find a user-exit for particular field for e.g bupla(bussiness place) in MIRO.
Please suggest me.
Thanks and Regards ,
Rahul Singh.

Hi Rahul,
Here is the procedure to create field exits.
Step by step procedure for creating Field Exits
There are eight steps to creating a field exit:
Step 1: Determine Data Element
Step 2: Go To Field Exit Transaction
Step 3: Create Field Exit
Step 4: Create Function Module
Step 5: Code Function Module
Step 6: Activate Function Module
Step 7: Assign Program/Screen
Step 8: Activate Field Exit
Step 1: Determine Data Element
u2022     Before you can begin adding the functionality for a field exit, you must know the corresponding data element.
Step 2: Go To Field Exit Transaction
u2022     The transaction to create field exits is CMOD.
u2022     You can use the menu path Tools -> ABAP/4 Workbench -> Utilities -> Enhancements -> Project management.
u2022     From the initial screen of transaction CMOD, choose the Text enhancements -> Field exits menu path.
u2022     After choosing this menu path, you will be taken to the field exits screen. From here, you can create a field exit.
NOTE : Even though you use transaction CMOD to maintain field exits, you do not need to create a project to activate field exits.
Step 3: Create Field Exit
u2022     From the field exit screen of transaction CMOD, choose the Field exit -> Create menu path.
u2022     After choosing this menu path, a dialog box will prompt you for the appropriate data element .
u2022     Enter the data element name and click the u2018Continueu2019 pushbutton.
u2022     Now, you will be able to create the function module associated to the data elementu2019s field exit.
Step 4: Create Function Module
u2022     You will automatically be taken to the Function Library (SE37) after entering a data element name and clicking the u2018Continueu2019 pushbutton.
u2022     In the u2018Function moduleu2019 field, a function module name will be defaulted by the system based on the data element specified. This name will have the following convention:
FIELD_EXIT_<data element>
u2022     You can add an identifier (an underscore followed by a single character ).
u2022     The first function module for a data elementu2019s field exit must be created without an identifier.
u2022     To create the function module, click on the u2018Createu2019 pushbutton, choose menu path Function module -> Create, or press u2018F5u2019.
u2022     After choosing to create the function module, you will get the warning: "Function module name is reserved for SAP". This message is just a warning so a developer does not accidentally create a function module in the field exit name range. By pressing u2018Enteru2019, you will be able to go ahead and create the function module.
u2022     Before coding the function module, you will have to specify the function modules attributes -- function group, application, and short text.
Step 5: Code Function Module
u2022     From the function moduleu2019s attributes screen, click on the u2018Source codeu2019 pushbutton or choose the Goto -> Function module menu path to the code of the function module.
u2022     Here you will add your desired functionality for the field exit.
u2022     Remember that field exitu2019s function module will have two parameters -- one importing parameter called "INPUT" and one exporting parameter called "OUTPUT". These parameters will be set up automatically by the system.
u2022     You must remember to assign a value to the OUTPUT field. Even if the value does not change, it must be moved from the INPUT field to the OUTPUT field.
Step 6: Activate Function Module
u2022     After coding the function module, you must remember to activate it.
u2022     Use the Function module -> Activate menu path to activate the function module.
u2022     At this point, you can return to the field exit transaction.
u2022     You should be able to 'green arrow' back to this transaction.
u2022     When you return to the field exit transaction, you will see an entry for the newly created field exit.
u2022     At this point, the field exit is global. That is, it applies to all screens that use a particular data element. On any screen that uses the data element, the corresponding field exit function module will be triggered, once it is active.
u2022     Also, the field exit will not be triggered yet because it is inactive.
Step 7: Assign Program/Screen
u2022     This step is only needed if you want to make a field exit local.
u2022     To make a field exit local, select the field exit and click on the u2018Assign prog./screenu2019 pushbutton.
u2022     In the dialog box , indicate the appropriate program name and screen number.
This information indicates that the field exit is local to the specified screen in the specified program.
u2022     In the dialog box, you determine which function module gets executed for the field exit by specifying the identifier in the u2018Fld. Exitu2019 field.
u2022     If this field is left blank, the function module triggered will be 'FIELD_EXIT_<data element>'.
u2022     If a single-character identifier is entered into the field, the function module triggered will be 'FIELD_EXIT_<data element>_<identifier>'.
Step 8: Activate Field Exit
u2022     The field exit must be active for it to be triggered by the system.
u2022     Activate the field exit by choosing the Field exit -> Activate menu path.
u2022     After assigning the field exit to a change request, its status will change to u2018Activeu2019 and it will be triggered automatically on the appropriate screen(s).
NOTE : In order to activate the field exit the profile parameter abap/fieldexit = YES must be set on all application servers
Execute the transaction SE38 with PROGRAM NAME - RSMODPRF
Then give the Data Element Name for which field you want to create the exit(Just cross check with your field data element) and execute.
then it takes you to SE37 with the function module name FIELD_EXIT_<DATA ELEMENT NAME> and then create the same function module.
and in the coding part, You can write your logic to display the output of that field. and activate it.
once you complete the above,
Again execute SE38 transaction with program RSMODPRF and again click on Execute button without any Data Element Name. Now you select the data element which you have created and click on Assign prog/ Screen button and assign the program name and screen number of the filed and click on the menu Field Exit and Activate.
Hope it helps.
Regards
Radhika
Edited by: Radhika Pande on Nov 26, 2009 7:58 AM

I need a control which allows a user to choose from specific values (which I specify), NOT 0, 1, 2 etc. [I KNOW I can let him enter 0, 1,2 fro

m a listbox, and then change the value on the block diagram, but what I want is that on the subvi node itself he can enter the actual values, say 1, 10, 200. Does anyone know how to do this, creatively, since currently a control like this is not available.I need a control in Labview which allows a user to choose from specific values (which I specify), NOT 0, 1, 2 etc. [I KNOW I can let him enter 0, 1,2 from a listbox, and then change the value on the block diagram, but what I want is that on the subvi node itself he can enter the actual values, say 1, 10, 200. Does anyone know how to do this, creatively, since currently a con
trol like this is not available.

m a listbox, and then change the value on the block diagram, but what I want is that on the subvi node itself he can enter the actual values, say 1, 10, 200. Does anyone know how to do this, creatively, since currently a control like this is not available.> I need a control which allows a user to choose from specific values
> (which I specify), NOT 0, 1, 2 etc. [I KNOW I can let him enter 0, 1,2
> from a listbox, and then change the value on the block diagram, but
> what I want is that on the subvi node itself he can enter the actual
> values, say 1, 10, 200. Does anyone know how to do this, creatively,
> since currently a control like this is not available.
>
One way of doing this is to use either a ring or enum where the strings
presented to the user are "1", "10", or whatever you like. On the
diagram, the values will be 0, 1, 2, in a compact counting sequence.
Then do an array index into a constant. If this is done more than one
place, make the control a typedef so you can keep them consistent an
d
make the index be done in a subVI. Then whenever you need this, you
drop the control and the subVI, out comes the integer, float, or
whatever it is you want to index.
Greg McKaskle

Where I can see all document of pay and the user that modified

Hello people
Where I can generate a report with all user that modified a document of pay.
I have a problem, in the finance area, they request a reports with all users that modified some document of pay.
In the FB04 transaccion I see the document of pay and user that modified, but is one for one, in my company are generated thousand documents pay for day.
I see that the transacction FB04 gets the information of the tables "BSEG", but in this table I do not have the field "User" and with this I will can link the document of pay more the user and date
Example
Number of document              User                              Date
30004567                                Pvaldez                        05.01.2010
30008756                                Rpower                         07.08.2011
30008890                                Mramos                        15.11.2012

Hi Naveen.
I reviewed the two notes, but this not help me with my problem.
I think that in the system when a user modify a document pay this is saved a register in some table.
In the table BSEG I find that there a part, but this have link with other table for complete the report, I do not know what other table complemented this information.
I require a report with all document of pay more the user that modified and the date
How I can generated this report ?
atte.
Gerardo Ceballos

Again: two facts and one conformed dimension

Dear all,
I know this has been asked quite often but I haven't found a solution for my problem here. Believe me I have done a lot of searching across the net ..
What I want to do is the following:
I have two fact tables with a number of common dimensions. A report should show the two facts across these common dimensions.
To keep it simple I start with only one common dimension.
Here's what get's to the db from OBIEE:
*SELECT Revenue."Date (YYYYMMDD)" saw_0, Sales."Day Day Code" saw_1, Revenue."TPV (Total Payment Volume in Millicent [€])" saw_2, Sales.DEBIT_AMOUNT saw_3 FROM "Company KPIs" ORDER BY saw_0, saw_1, saw_3*
Note that *Revenue."Date (YYYYMMDD)"* and *Sales."Day Day Code"* are the same field from the common time dimension. I just put them in different presentation tables for the end users.
TPV and DEBIT_AMOUNT are facts from the two different cubes.
Everything fine, right?
Now I look at the nqquery.log:
RqList
Dim Time.Day Day Code as c1 GB,
Dim Time.Day Day Code as c2 GB,
*Tpv:[DAggr(Cube Revenue.Tpv by [ Dim Time.Day Day Code, Dim Time.Day Id, CUBE_SALES.DEBIT_AMOUNT] )] as c3 GB,*
CUBE_SALES.DEBIT_AMOUNT as c4 GB,
Dim Time.Day Id as c5 GB
OrderBy: c1 asc, c2 asc, c4 asc
now the bold thing looks odd to me. Is he trying to aggregate one cube based on the other? Could be the problem, but where to influence this?
And finally this translates into this query:
WITH
SAWITH0 AS (select distinct T4110.DEBIT_AMOUNT as c1,
T281.DAY_DAY_CODE as c2,
T281.DAY_ID as c3
from
DIM_TIME T281,
CUBE_SALES T4110
where ( T281.DIMENSION_KEY = T4110.DIM_TIME ) ),
SAWITH1 AS (select distinct SAWITH0.c2 as c1,
SAWITH0.c2 as c2,
*cast(NULL as DOUBLE PRECISION ) as c3,*
SAWITH0.c1 as c4,
SAWITH0.c3 as c5
from
SAWITH0)
select SAWITH1.c1 as c1,
SAWITH1.c2 as c2,
SAWITH1.c3 as c3,
SAWITH1.c4 as c4
from
SAWITH1
order by c1, c2, c4
As you see, the tpy ist gone and a NULL appears. That's what I see in the report. TPV is always NULL.
So where did I miss a configuration ???
Thanks, Knut

You only need to set the content levels on the measures themselves when you want non-conformed dimensions in the report, as your working with fully conformed dims just make sure your levels are set on the content tab for each Logical Table source in the Logical fact table. Leave the non-conformed dim hierarchies as blank.
Remember - You should put a hierarchy on each logical dim , even if there is no real hierarchy, just have a total -> Detail.
You should always always always set your content levels for logical table sources, both in Dimensions and Logical fact LTS's.
If they are greyed out, make sure your not in read only, have checked the object out if on-line mode, failing that, perform the changes off-line then re-start your BI Server.

Provisioning an user to modify one specific dimension

Similar Messages

Maybe you are looking for