Provisioning status of exchange connector is shows waiting in oim 11g r2

Hi,
I am trying to provision a user in to exchange server but the status of provison showing waiting,the user is already provisoned in to AD.
please any one help me on this
Thanks,

You need to do following things, before creating mailbox-
1. Configure IT resource.
2. Run mailbox database lookup recon
Go through the downloaded connector document for more details.

Similar Messages

Configuring DBAT 9.1.0.5 connector with PostgreSQL database in OIM 11g

Hi,
I am trying to configure the DBAT 9.1.0.5 connector with PostgreSQL database in OIM 11g (11.1.1.5.0), thou' in the connector document the suppot for this postgres is not mentioned.
So, as mentioned for other databases that the JDBC driver has to be copied to $JAVA_HOME/jre/lib/ext, I have also copied the postgres driver to the specific folder but while trying to configure the connector, I am getting the error as 'No suitable driver found'. Following is the stacktrace snippet.
SEVERE: Class/Method: DBFacade/getConnection encounter some problems: No suitable driver found for jdbc:postgres://funereus.stadi.sonera.fi:5432/DEV1_DIGSIG
java.sql.SQLException: No suitable driver found for jdbc:postgres://funereus.stadi.sonera.fi:5432/DEV1_DIGSIG
at java.sql.DriverManager.getConnection(DriverManager.java:602)
at java.sql.DriverManager.getConnection(DriverManager.java:154)
at org.apache.commons.dbcp.DriverManagerConnectionFactory.createConnection(DriverManagerConnectionFactory.java:51)
at org.apache.commons.dbcp.PoolableConnectionFactory.makeObject(PoolableConnectionFactory.java:290)
at org.apache.commons.pool.impl.GenericObjectPool.borrowObject(GenericObjectPool.java:840)
at org.apache.commons.dbcp.PoolingDataSource.getConnection(PoolingDataSource.java:95)
at com.thortech.xl.gc.impl.common.DBFacade.getConnection(Unknown Source)
at com.thortech.xl.gc.impl.common.DBFacade.getMetadata(Unknown Source)
at com.thortech.xl.gc.impl.common.DBFacade.getDBType(Unknown Source)
at com.thortech.xl.gc.impl.common.DBFacade.getSchema(Unknown Source)
at com.thortech.xl.gc.impl.recon.DBReconTransportProvider.detectMetadata(Unknown Source)
at com.thortech.xl.gc.impl.recon.DBReconTransportProvider.getMetadata(Unknown Source)
at com.thortech.xl.webclient.actions.CreateConnectorAction.getGenericAdapter(CreateConnectorAction.java:2202)
at com.thortech.xl.webclient.actions.CreateConnectorAction.imageScreen(CreateConnectorAction.java:1196)
at com.thortech.xl.webclient.actions.CreateConnectorAction.goNext(CreateConnectorAction.java:521)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
Caused by: java.sql.SQLException: No suitable driver found for jdbc:postgres://funereus.stadi.sonera.fi:5432/DEV1_DIGSIG
at java.sql.DriverManager.getConnection(DriverManager.java:602)
at java.sql.DriverManager.getConnection(DriverManager.java:154)
at org.apache.commons.dbcp.DriverManagerConnectionFactory.createConnection(DriverManagerConnectionFactory.java:51)
at org.apache.commons.dbcp.PoolableConnectionFactory.makeObject(PoolableConnectionFactory.java:290)
at org.apache.commons.pool.impl.GenericObjectPool.borrowObject(GenericObjectPool.java:840)
at org.apache.commons.dbcp.PoolingDataSource.getConnection(PoolingDataSource.java:95)
... 62 more
SEVERE: Class/Method: CreateGenConnectorAction/imageScreen encounter some problems: Provider Exception
java.lang.Exception: Provider Exception
at com.thortech.xl.webclient.actions.CreateConnectorAction.getGenericAdapter(CreateConnectorAction.java:2265)
at com.thortech.xl.webclient.actions.CreateConnectorAction.imageScreen(CreateConnectorAction.java:1196)
at com.thortech.xl.webclient.actions.CreateConnectorAction.goNext(CreateConnectorAction.java:521)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
I am using postgresql-8.4-703.jdbc4.jar and Driver class as org.postgresql.Driver
some suggestions on this would be highly appreciated.
Thanks
Sid

Thanks guys for the quick responses.
But I have tried both the options for putting the jar in Third Party and also by uploading using the OOTB utility UploadJar.sh.
But it is giving the same error.
I have tired rebouncing the server and also Purge cached, but no success.
Just to mention again, I have tried with all the last 3 postgres JDBC4 driver available on the site (u mentioned).
So, any other clue?
Thanks in advance.

Getting Error - Cause: Status of the batch is not 'Completed' in OIM 11g R2 during Trusted Recon

Hi All
I am new to OIM 11g R2. I am trying to create custom connector for trusted recon. The case is to migrate the users from 10g to 11g R2. The recon event is created but it is in Event Recieved status and when I re-evaluate the event, its giving error - Cause: Status of the batch is not 'Completed'.
I saw in some posts to change the recon batch size parameter to 0 and restart the server. I have done that but still I am facing the same issue.
There is no child data in the attribute mapping and user login is set as key.
Any inputs are welcome on how to get rid of this error.
Regards
Vinay

J_IDM@ I am not passing any OID IT Resource as parametere. Yes I have checked but no entries were thr.
Prakash bAJIYA@ i was running Job fro Web console & didnt find any such object. it may be diff from design console.
810444@ Thanks.
Dear All,
In Web Console Job Scheduler, I had one Recon "LDAP FULL Recon" which has a property
"OIM Employee Type" which was before "Full-TYpe" i changed it to * & it worked.Now I am able to generate events.
It seems like value of Employee Type has an Issue in OID, please correct me ?
Thanks a lot for you guys contribution.

AD Password Sync connector 9.1.1 With OIM 11g R2 - ERROR OVER SSL

I have set up AD password sync with from AD to OIM 11G R2
The password syncs from AD to OIM 11G R2 on non ssl port 389.
But if fails on SSL Port 636.
Errors in OIMMain.Log:_
Debug [10/11/2012 10:49:34 AM] Inside ConnectToADSI
Debug [10/11/2012 10:49:34 AM]
ldap_connect failed with
Debug [10/11/2012 10:49:34 AM] Server Down
Debug [10/11/2012 10:49:34 AM]
Steps Carried Out thus far:_
AD is up and running.
Configured AD Password Sync Connector on 636 and selected ssl.
Created Certificate on OIM host, configured custom identity key store on weblogic. Restarted Weblogic.
Imported Certificate to AD. After this, restarted the AD
I can Telnet port 636 from OIM Box and also connect to AD through LDAP Browser on 636 and view OU and CN, so this seems fine.
Provisioning from OIM through Connector Server to AD works over SSL and this works fine.
Help would be appreciated.
Many Thanks

This question is now been fixed.
Instead of explicitly stating 636 for SSL,
Use the same port 389 for ssl and also configured oim port to be 140001 which is the ssl port for oim in the configuration of OIM Password Sync.
Export Certificates from AD to java security keystore and to weblogic keystore
Export .pem certificate created on OIM host machine to AD.
Restart weblogic, oim and AD
Everything would work fine.
For all the other information, refer to doc.
Thanks

Connector ConnectorKey not found Error OIM 11g R2 Urgent..!

Hi,
We have implemented custom ICF connector for our trusted resource and we have deployed ICF bundle using UploadJar Utility successfully. When we try to execute the trusted recon we are getting following error:
Unable to execute job : yte mysql User Reconciliation with Job History Id:11321[[
oracle.iam.connectors.icfcommon.exceptions.IntegrationException: Connector ConnectorKey( bundleName=com.yte.iam.oim.dbc bundleVersion=1.0 connectorName=om.yte.iam.oim.dbc.yteConnector ) not found
at oracle.iam.connectors.icfcommon.ConnectorFactory.createConnectorFacade(ConnectorFactory.java:176)
at oracle.iam.connectors.icfcommon.recon.AbstractReconTask.init(AbstractReconTask.java:115)
at com.thortech.xl.scheduler.tasks.SchedulerBaseTask.execute(SchedulerBaseTask.java:382)
at oracle.iam.scheduler.vo.TaskSupport.invokeExecute(TaskSupport.java:183)
at oracle.iam.scheduler.vo.TaskSupport.access$000(TaskSupport.java:40)
at oracle.iam.scheduler.vo.TaskSupport$1.processWithoutResult(TaskSupport.java:143)
at oracle.iam.platform.tx.OIMTransactionCallbackWithoutResult.process(OIMTransactionCallbackWithoutResult.java:9)
at oracle.iam.platform.tx.OIMTransactionCallback.doInTransaction(OIMTransactionCallback.java:13)
at oracle.iam.platform.tx.OIMTransactionCallback.doInTransaction(OIMTransactionCallback.java:6)
at org.springframework.transaction.support.TransactionTemplate.execute(TransactionTemplate.java:128)
at oracle.iam.platform.tx.OIMTransactionManager.execute(OIMTransactionManager.java:22)
at oracle.iam.scheduler.vo.TaskSupport.executeJob(TaskSupport.java:125)
We have verified that metainf file and the configuration lookup are in sync.
Any kind of help is highly appreciated.
Thanks in advance

See if this helps:
1. Stop the Connector Server.
2. From the installation media, copy and extract contents of the bundle/<<YourConnector.zip>> file to the CONNECTOR_SERVER_HOME directory.
Please note that files in the zip should directly go into connector server home, not under any another directory under connector server home.
3. Start the Connector Server for the connector bundle to be picked up by the Connector Server

OIM 11g r2 Exchange connector provisioning is not working

Hi,
I have created one user in oim and i have provisioned this user into AD successfully.
after that i have tried provision same user into Exchange but the user provisioning status is shows "*waiting*" and provision date also shows wrong.
Please any body help me on this issue..
Thanks,
Venu

Exchange goes to waiting status when AD is not listed in user's resource profile as Provisioned. Check whether AD is properly provisioned. It is better to always create a new process task before 'Create User' in Exchange resource object which checks whether AD is already provisioned for the user. Then this problem can be avoided.
Also when there are multiple AD resource object instances in user's resource profile and even one of that instance is in Provisioning status, Exchange goes to waiting status
Edited by: Durgaprasad on Mar 5, 2013 6:43 AM

Exchange Connector 3.0 status Never Run

Hi,
I've setup lab enviroment of SCSM 2012 SP1 following the instructions:
http://technet.microsoft.com/en-us/library/hh914226.aspx
Everything works fine with an exception of Exchange Connector. It is stuck in status: Never Run
I was able to configure the connector with out error. I checked the event logs and it showed success
of all the config items and even showed it connected to an email that I sent to the workflow mailbox:
Logs:
Log Name: Operations Manager
Source: Exchange Connector
Date: 7/28/2014 11:52:00 AM
Event ID: 0
Task Category: None
Level: Information
Keywords: Classic
User: N/A
Computer: GENINGSCSMT01.CORP.IGES.SI
Description:
Exchange Connector: Attempting to connect to Exchange with the settings: login email address="contoso@CORP", impersonation email address="none", server URL="https://geningcas.corp.iges.si/EWS/Exchange.asmx"
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Exchange Connector" />
<EventID Qualifiers="0">0</EventID>
<Level>4</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-07-28T09:52:00.000000000Z" />
<EventRecordID>152481</EventRecordID>
<Channel>Operations Manager</Channel>
<Computer>CONTOSO.COM</Computer>
<Security />
</System>
<EventData>
<Data>Exchange Connector: Attempting to connect to Exchange with the settings: login email address="testscsm@CORP", impersonation email address="none", server URL="...................................................................."
</Data>
</EventData>
</Event>
- Exchange Connector: Exchange web service tracing enabled.
- Exchange Connector: Using Exchange Web Service URL:.....................
EwsRequestHttpHeaders: <Trace Tag="EwsRequestHttpHeaders" Tid="1" Time="2014-07-28 09:52:00Z">
POST /EWS/Exchange.asmx HTTP/1.1
Content-Type: text/xml; charset=utf-8
Accept: text/xml
User-Agent: ExchangeServicesClient/14.03.0032.000
Accept-Encoding: gzip,deflate
</Trace>
EwsRequest: <Trace Tag="EwsRequest" Tid="1" Time="2014-07-28 09:52:00Z" Version="14.03.0032.000">
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:m="http://schemas.microsoft.com/exchange/services/2006/messages" xmlns:t="http://schemas.microsoft.com/exchange/services/2006/types" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Header>
<t:RequestServerVersion Version="Exchange2007_SP1" />
<t:TimeZoneContext>
<t:TimeZoneDefinition Id="Central Europe Standard Time" />
</t:TimeZoneContext>
</soap:Header>
<soap:Body>
<m:FindItem Traversal="Shallow">
<m:ItemShape>
<t:BaseShape>AllProperties</t:BaseShape>
</m:ItemShape>
<m:IndexedPageItemView MaxEntriesReturned="1" Offset="0" BasePoint="Beginning" />
<m:Restriction>
<t:And>
<t:IsEqualTo>
<t:FieldURI FieldURI="message:IsRead" />
<t:FieldURIOrConstant>
<t:Constant Value="false" />
</t:FieldURIOrConstant>
</t:IsEqualTo>
<t:IsEqualTo>
<t:FieldURI FieldURI="item:ItemClass" />
<t:FieldURIOrConstant>
<t:Constant Value="IPM.Note" />
</t:FieldURIOrConstant>
</t:IsEqualTo>
</t:And>
</m:Restriction>
<m:ParentFolderIds>
<t:DistinguishedFolderId Id="inbox" />
</m:ParentFolderIds>
</m:FindItem>
</soap:Body>
</soap:Envelope>
</Trace>
EwsResponseHttpHeaders: <Trace Tag="EwsResponseHttpHeaders" Tid="1" Time="2014-07-28 09:52:00Z">
200 OK
Transfer-Encoding: chunked
Content-Encoding: gzip
Vary: Accept-Encoding
Persistent-Auth: true
Cache-Control: private
Content-Type: text/xml; charset=utf-8
Date: Mon, 28 Jul 2014 09:52:00 GMT
Server: Microsoft-IIS/7.5
X-AspNet-Version: 2.0.50727
X-Powered-By: ASP.NET
</Trace>
EwsResponse: <Trace Tag="EwsResponse" Tid="1" Time="2014-07-28 09:52:00Z" Version="14.03.0032.000">
<?xml version="1.0" encoding="utf-8"?>
<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">
<s:Header>
<h:ServerVersionInfo MajorVersion="14" MinorVersion="2" MajorBuildNumber="347" MinorBuildNumber="0" Version="Exchange2010_SP2" xmlns:h="http://schemas.microsoft.com/exchange/services/2006/types"
xmlns="http://schemas.microsoft.com/exchange/services/2006/types" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
</s:Header>
<s:Body xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<m:FindItemResponse xmlns:m="http://schemas.microsoft.com/exchange/services/2006/messages" xmlns:t="http://schemas.microsoft.com/exchange/services/2006/types">
<m:ResponseMessages>
<m:FindItemResponseMessage ResponseClass="Success">
<m:ResponseCode>NoError</m:ResponseCode>
<m:RootFolder IndexedPagingOffset="1" TotalItemsInView="2" IncludesLastItemInRange="false">
<t:Items>
<t:Message>
<t:ItemId Id="AAMkAGY0NWM1MDJlLWNlYzctNDUwMy04NjUyLWZmNmJhODZmZWFjNwBGAAAAAABEWg/FMFIlQ6snViUYxTCgBwCX9G6oX6gvSK4RK8YlCtwaAAAApoPnAACX9G6oX6gvSK4RK8YlCtwaAAAApqtHAAA=" ChangeKey="CQAAABYAAACX9G6oX6gvSK4RK8YlCtwaAAAApwJt"
/>
<t:ParentFolderId Id="AAMkAGY0NWM1MDJlLWNlYzctNDUwMy04NjUyLWZmNmJhODZmZWFjNwAuAAAAAABEWg/FMFIlQ6snViUYxTCgAQCX9G6oX6gvSK4RK8YlCtwaAAAApoPnAAA=" ChangeKey="AQAAAA==" />
<t:ItemClass>IPM.Note</t:ItemClass>
<t:Subject>FW:
Test 2</t:Subject>
<t:Sensitivity>Normal</t:Sensitivity>
<t:DateTimeReceived>2014-06-13T05:41:55Z</t:DateTimeReceived>
<t:Size>9889</t:Size>
<t:Importance>Normal</t:Importance>
<t:IsSubmitted>false</t:IsSubmitted>
<t:IsDraft>false</t:IsDraft>
<t:IsFromMe>false</t:IsFromMe>
<t:IsResend>false</t:IsResend>
<t:IsUnmodified>true</t:IsUnmodified>
<t:DateTimeSent>2014-06-13T05:41:53Z</t:DateTimeSent>
<t:DateTimeCreated>2014-06-13T05:41:55Z</t:DateTimeCreated>
<t:ReminderIsSet>false</t:ReminderIsSet>
<t:ReminderMinutesBeforeStart>0</t:ReminderMinutesBeforeStart>
<t:DisplayCc />
<t:DisplayTo>Test Scsm</t:DisplayTo>
<t:HasAttachments>false</t:HasAttachments>
<t:Culture>en-US</t:Culture>
<t:EffectiveRights>
<t:CreateAssociated>false</t:CreateAssociated>
<t:CreateContents>false</t:CreateContents>
<t:CreateHierarchy>false</t:CreateHierarchy>
<t:Delete>true</t:Delete>
<t:Modify>true</t:Modify>
<t:Read>true</t:Read>
</t:EffectiveRights>
<t:LastModifiedName>Gorazd Lenko</t:LastModifiedName>
<t:LastModifiedTime>2014-06-13T05:41:55Z</t:LastModifiedTime>
<t:Sender>
<t:Mailbox>
<t:Name>Gorazd Lenko</t:Name>
</t:Mailbox>
</t:Sender>
<t:IsReadReceiptRequested>false</t:IsReadReceiptRequested>
<t:IsDeliveryReceiptRequested>false</t:IsDeliveryReceiptRequested>
<t:ConversationIndex>Ac+Gyiy/zkDKDTIqSzSWEj8rvPTxVQ==</t:ConversationIndex>
<t:ConversationTopic>test2</t:ConversationTopic>
<t:From>
<t:Mailbox>
<t:Name>Gorazd Lenko</t:Name>
</t:Mailbox>
</t:From>
<t:InternetMessageId><CC14C50767AF3448BEC68A24DC76AC439F00CDE0@></t:InternetMessageId>
<t:IsRead>false</t:IsRead>
<t:IsResponseRequested>false</t:IsResponseRequested>
<t:ReceivedBy>
<t:Mailbox>
<t:Name>Test Scsm</t:Name>
</t:Mailbox>
</t:ReceivedBy>
<t:ReceivedRepresenting>
<t:Mailbox>
<t:Name>Test Scsm</t:Name>
</t:Mailbox>
</t:ReceivedRepresenting>
</t:Message>
</t:Items>
</m:RootFolder>
</m:FindItemResponseMessage>
</m:ResponseMessages>
</m:FindItemResponse>
</s:Body>
</s:Envelope>
</Trace>
As you can see from the last event (bold letters) the Workflow account manages to get to the Exchange account, reads the inbox, but it isn't able to poll the message to SM.
Any ideas guys?

Hi,
It was set to Default Incident Template. I have created a new Incident template and recreated Exchange Connector, but the issue is still present. Workflow account is a member of SCSM Admin role, Workflow role and a local admin on the server. It is also Sysadmin
on the database.
On the Exchange server I have also ran Get_MailboxStatistics command and the output:
[PS] C:\Windows\system32>Get-MailboxStatistics | select lastlog* | fl
cmdlet Get-MailboxStatistics at command pipeline position 1
Supply values for the following parameters:
Identity: testscsm
LastLoggedOnUserAccount : CORP\testscsm
LastLogoffTime : 31.7.2014 7:45:14
LastLogonTime : 31.7.2014 7:39:58
So that means that the a
ccount logs in to mailbox but is unable to process emails.
Also I have found the difference in the EWSLogEntry on the test and production server:
The production log says:
<m:IndexedPageItemView MaxEntriesReturned="2147483647" Offset="0" BasePoint="Beginning" />
and the test log:
<m:IndexedPageItemView MaxEntriesReturned="1"
Offset="0" BasePoint="Beginning" />
Is there any way I can edit those settings?

SCSM 2012 Exchange connector 3.0 Status Never Run.

HI ,
SCSM exchange connector was Running for almost 8 months . all of sudden it stopped pulling email from Exchange Server.
I looked in to the issue and did not found any major error in the Event log “Operation Manager”
Only event were warning, “OpsMgr Config Service failed to send the dirty state notifications to the dirty OpsMgr Health Services. This may be happening because the Root OpsMgr Health Service is not running.” I did not installed SCOM at
all. This server is not connected to any SCOM server.
I have reinstalled the Exchange web Service API (copied file to SCSM folder)
I have reinstalled exchange connector 3.0 (copied files to SCSM folder and imported management packs)
Created new Exchange connector and all test passed.
But the connector status stays “Never Run”
In my regedit ,I also made the following changes
KEY_LOCAL_MACHINE\SOFTWARE\Microsoft\System Center Service Manager Exchange Connector
EnableEWSTracing = 7
LoggingLevel= 7
I have also looked and tried every option with “Run as Account” and also making admin Role.
I am not getting any error in the log apart from following warning .
I did not found any major error in the Event log “Operation Manager
Only event were warning, “OpsMgr Config Service failed to send the dirty state notifications to the dirty OpsMgr Health Services. This may be happening because the Root OpsMgr Health Service is not running.
Can someone help me , what should be the next step.

the reason you are seeing operations manager errors is because Service manager uses the operations manager SDK to do all of it's work. the error that you are seeing "OpsMgr Config Service failed to send the dirty state notifications to the dirty OpsMgr
Health Services. This may be happening because the Root OpsMgr Health Service is not running." means that the service manager configuration service can't notify the data access service that there are changes to it's MP base, for whatever reason.
i would stop all the system center services on this server, go into the service manager folder, find the "Health state" and "Config State" folders, and move them somewhere else on the system, then restart both services. assuming your
system isn't otherwise damaged, this will force both the config and data access services to rebuild their cache from the database, and should unstick your workflows.

HT4211 I'm not able to download apps from App Store. It never downloads and it shows waiting status.can somebody please help me resolve this issue

I'm not able to download apps from App Store. It never downloads and it shows waiting status.can somebody please help me resolve this issue

I really do not think it is the iPad or your network connection. Other users have reported this very same issue. Try this and see if it works for you - it may not work - but it's easy to try - harmless - and it has worked in the past for others.
Try signing out of your account and restart your iPad.
Go to Settings>Store>Apple ID and tap the ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button. Go back to Settings>Store> Apple ID and sign in again.

ICF Exchange connector for OIM 11gR2

When i installed Exchange connector i saw that the process form does not contain objectGUID field . So when we link AD and exchange with depends on tab in design console how will Exchange provisioning process get to know whether AD is provisioned or not?

The linking as far as I know depends upon your recon key field and the recon rule. Since AD & Exchange are tied together, we follow the same recon field and rule (Atleast I haven't seen different recon field or rule for these two systems).
Now suppose you have a user in OIM and you manually create AD/Exchange for the user and then do a target Exchange recon, OIM will show up exchange as provisioned state even though OIM does not have AD resource information. This is the case for recon.
While doing provisioning, since the exchange resource has dependency with AD resource object, that's the reason why exchange would be in waiting state before AD gets into provisioned state.
For the objectGUID, you can remove it from all the configurations of AD and Exchange & the connector would still work fine as long as you have a valid recon key field.
Hope this helps,
Bikash
Edit: just saw after replying that the question was about R2. My views are based on R1 and I understand that it's same for R2 as well. But I might be wrong in R2.

Exchange Connector 3.0 (Hotfix Release) Error - Error Message=The key value of an object cannot be changed.

Hello,
I am running Service Manager 2012 with the Exchange Connector 3.0 RTM (Re-release Version). The issue I have is that when an e-mail is processed that is trying to update the status or event log of an incident, the Exchange Connector encounters an error
and will not update the object. The Operations Manager log denotes:
Exchange Connector: Unable to process mail item. Subject="Close Ticket: [IRXXXXX]", Error Message=The key value of an object cannot be changed.
This will happen on a seemingly random selection of Incident work items. I cannot correlate them with a specific template, exchange connector, or incident tier queue that could be causing the issue. I can recreate the way a specific ticket
was created and update it through e-mail without issue, and the next ticket can cause the error to trigger.
I have already opened a Microsoft Support Case using our Software Assurance agreement. After a few months of troubleshooting the issue and trying different fixes, Microsoft support said they were unable to fix the problem and that we would need to
purchase Premier support to go further. At this point I thought I would reach out to the community for ideas.
The setup I have for the Exchange connectors is as follows.
I have three separate Exchange connectors set up to three different mailboxes. One Exchange connector processes external support tickets and applies a specific template. Another processes client support tickets and applies a different template.
And the last Exchange connector processes internal tickets and also processes the updates of tickets created by the other two exchange connectors.
Here are the fixes I've attempted so far:
1. Changed the templates that each Exchange connector applies.
2. Changed the management pack that each template is stored in.
3. Checked my management pack(s) for extended classes by searching for Extension="true" (This was also checked by Microsoft support)
4. Deleted each Exchange connector and recreated each connector
5. Deleted each Exchange connector, deleted the management pack, and reinstalled the management pack and connectors
6. Repeated Step 5, deleted Microsoft.SystemCenter.ExchangeConnector.dll and Microsoft.SystemCenter.ExchangeConnector.resources.dll and then installed the Exchange connector Re-release version 3.0 Published 10/7/2013 (which is supposed to address this
issue)
7. Deleted the HealthServiceState folder and restarted the Management Service
I'm not really sure what to do at this point. I've put many hours into customizing my installation to get it working for my organization so reformatting and starting from scratch would be a nightmare scenario. This environment is in production.
I do have a band-aid in place using Orchestrator. Basically I have a monitor task searching for the error message and when it finds one it searches the mailbox for the offending e-mail and applies either the Resolve or Close status change that is requested
from the user. However, I do not have it working to update the ticket if a comment is applied to the incident. If anyone is in this position and needs to know how to apply this Orchestrator task I am willing to provide my workflow.
I am new to the community and am already impressed with the amount of help and effort there is in this forum. I appreciate in advance any help that is provided and am open to any ideas at this point. I can post more information as needed.
Thank you,
John

Yes that is the whole template. However, I did confirm that this is only happening to incidents where either of two situations triggers a runbook to fire and modify the incident. When I remove the activity from the incident it does clear the
issue. For some background the first Runbook Activity set's the first response date when an incident is resolved if the first response value is null. The second assigns the incident to a user upon creation if the title contains assignto:username;
1.)
<ObjectTemplate ID="Template.d33b5bbcaf3c49b18d8b72bc1e5e1ee4" TypeID="IncidentManagement!System.WorkItem.Incident.ProjectionType">
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/Escalated$">False</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/NeedsKnowledgeArticle$">False</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/HasCreatedKnowledgeArticle$">False</Property>
<Object Path="$Context/Path[Relationship='CustomSystem_WorkItem_Activity_Library!System.WorkItemContainsActivity' TypeConstraint='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity']$">
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/RunbookId$">4085f0da-ab83-48e5-bbe3-1f3b5fa2dc4a</Property>
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/TemplateId$">Template.d33b5bbcaf3c49b18d8b72bc1e5e1ee4</Property>
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/IsReadyForAutomation$">True</Property>
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/PropertyMapping$"><?xml version="1.0" encoding="utf-16"?>
<ParameterMapping xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<ParameterList>
<RunbookParameterItem>
<Name>Get RA Guid</Name>
<Id>344b15effc1a44528e517c5b4227179c</Id>
<Type>String</Type>
<Value>Generic::Id</Value>
<Direction>In</Direction>
<ContextInfo />
</RunbookParameterItem>
</ParameterList>
<RunbookId>4085f0da-ab83-48e5-bbe3-1f3b5fa2dc4a</RunbookId>
</ParameterMapping></Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/ChildId$">1906</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/Status$">$MPElement[Name='CustomSystem_WorkItem_Activity_Library!ActivityStatusEnum.Active']$</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/Skip$">False</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Library!System.WorkItem']/Title$">Set First Response on Resolve</Property>
</Object>
</ObjectTemplate>
2.)
<ObjectTemplate ID="Template.b311e1f9126e4e19bbbbeb65ddb220ba" TypeID="IncidentManagement!System.WorkItem.Incident.ProjectionType">
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/Escalated$">False</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/Status$">$MPElement[Name='CustomSystem_WorkItem_Incident_Library!IncidentStatusEnum.Active']$</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/NeedsKnowledgeArticle$">False</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/HasCreatedKnowledgeArticle$">False</Property>
<Object Path="$Context/Path[Relationship='CustomSystem_WorkItem_Activity_Library!System.WorkItemContainsActivity' TypeConstraint='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity']$">
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/RunbookId$">ca88b13b-861a-4d39-a3cb-fd912d951e35</Property>
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/TemplateId$">Template.b311e1f9126e4e19bbbbeb65ddb220ba</Property>
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/IsReadyForAutomation$">True</Property>
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/PropertyMapping$"><?xml version="1.0" encoding="utf-16"?>
<ParameterMapping xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<ParameterList>
<RunbookParameterItem>
<Name>RA Activity GUID</Name>
<Id>5677d117a0294a2c898a695032f26c72</Id>
<Type>String</Type>
<Value>Generic::Id</Value>
<Direction>In</Direction>
<ContextInfo />
</RunbookParameterItem>
</ParameterList>
<RunbookId>ca88b13b-861a-4d39-a3cb-fd912d951e35</RunbookId>
</ParameterMapping></Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/ChildId$">1120</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/Status$">$MPElement[Name='CustomSystem_WorkItem_Activity_Library!ActivityStatusEnum.Active']$</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/Skip$">False</Property>
<Property Path="$Context/Property[Type='WorkItem!System.WorkItem']/Title$">Execute Orchestrator IR - Autoassign</Property>
</Object>
</ObjectTemplate>

Outlook 14.4.8 not synchronizing with Exchange 2007 anymore (shows "downloading" but no new messages shown in inbox"

Outlook 14.4.8 on iMAC Retina and Yosemite 10.10.2 is not synchronizing with Exchange 2007 anymore (shows "downloading" but no new messages shown in inbox".
Accessing Mails with Webbrowser and from Windows Outlook is working correctly.
All Macs (also the ones with OS 10.6.8) do not anymore show any new messages in inbox.
Restarted Server, tried to disable autodiscover on macs and deleting/adding account and repairing database does not fix the problem. Also restarted server several times.
We have the same problem on 2 imacs retina with yosemite and on 2 mac pro with 10.6.8 and different office 2011 versions.
i tried to configure the exchange account in apple mail on yosemite and it also states "connected" and does list some folders but no new mails are getting in.
Windows clients and outlook on them works and syncs fine, and also when connecting via webbrowser at owa it must be a mac-specific/webdav issue.
exchange 2007 Sp3 Version 8.3 (bild 83.6) and Update Rollup 15 for sp3 (automatic updates "HIGH" for server and clients)
there is one update popping up again and again even after everytime successull installation: Windows Mlicious Software Removal Tool x64 - October 2010.
i tried to configure a new user with empty mailbox and configured it with microsoft mail (mac - yosemite) as exchange and was able to send a mail from there (even if quite delayed).
but there are not coming in any mails.
same exchange accounts triggered by imap do work and also via owa.
Exchange Accounts in Outlook for MAC and also in Mail (Yosemite) do show the folder structures but there is no mails showing up. I can send mails from the exchange accounts created but they seem to be processed with a delay of like 15minutes and outlook
is giving error "end of file reached" but messages are send after some time.
Does seem like EWS is extremely slow, to slow perhaps to sync and therefore ending in timeout.
Also i cannot reach the server from externally over ssl https 443. if testing port 443 of exchange from outside the port seems closed even firewall settings of sbs 2008 and sonicwall ports are correctly open.
could it be there is something in regarding webdav which is very slow and leading to timeouts ?
in application log i do have the following two information events every few minute:
The Exchange Web Services started successfully. Event ID 1
and
Process STORE.EXE (PID=3688). Exchange Active Directory Provider has discovered the following servers with the following characteristics:
(Server name | Roles | Enabled | Reachability | Synchronized | GC capable | PDC | SACL right | Critical Data | Netlogon | OS Version)
In-site:
SERVER.org.local CDG 1 7 7 1 0 1 1 7 1
Out-of-site:
Errors in Application log:
The Open Procedure for service "BITS" in DLL "C:\Windows\system32\bitsperf.dll" failed. Performance data for this service will not be available. The first four bytes (DWORD) of the Data section
The entry <C:\WSUS\WSUSCONTENT\CONTENTFOLDERACLSCHECK.TXT> in the hash map cannot be updated.
An exception Microsoft.Exchange.Data.Storage.ConversionFailedException occurred while converting message Imap4Message 69447
Also outlook 2011 clients are asked by time to time to reenter pwds and errors like "connection is closed. 13"
Faulting application taskeng.exe, version 6.0.6002.18342, time stamp 0x4cd34898, faulting module ntdll.dll, version 6.0.6002.18881, time stamp 0x51da3d16, exception code 0xc000071b, fault offset 0x0000000000082445, process id 0x3288
Certificate Services Client Provider pautoenr.dll raised an exception. Exception code 3221225477.
Backup Exec:
FULL_BACKUP -- The job failed with the following error: A failure occurred querying the Writer status.
Volume Shadow Copy Service error: A critical component required by the Volume Shadow Copy service is not registered. This might happened if an error occurred during Windows setup or during installation of a Shadow Copy provider. The
error returned from CoCreateInstance
Exchange VSS Writer (instance 2d932ef8-6319-4ab8-a45f-1242480b44ad:15) failed with error code 1295 when processing the backup completion event.

Hi,
Since Outlook running on Windows works well, it seems an issue on the Mac side. I suggest ask Mac for help so that you can get more professional suggestions.
More information for your reference:
Please try to verify whether there is any expired certificate from the computer personal store.
If it is the case, please remove them.
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Mavis Huang
TechNet Community Support

Create user successful but the resource is still in provisioning status

Hi Friends,
I have installed AD cnnector in OIM 11g successfully. And tried to provision it.
Create user was successful and there are no errors in the log. But still the resource status is showing as provisioning instead of provisioned. Please let me know, how to resolve this issue.

Go to Create User task in AD Process Definition and then go to Task to Object Status Mapping tab, set the status as Provisioned for Completed (C as Status) and try again.

Adding a user to group in OID based on provisioning of a generic connector

Hi All,
I have OIM 11g installed. Also I have created a generic connector and I provision it to the users. Now based on this, I was thinking of attaching a task in the process definition of the Generic connector I had created such that when the Create User happens, then I can get the task I created triggered so that I can add a user to a group in OID. I searched for some codes I could use for this but failed. Can someone please guide me as to what APIs and method calls I need to use to add a user in OID to a group. The group will be a static name and hence will not change over time. Say the name of the group is GenericConn so when I provision the generic connector to the user, in the OID the user's dn should be added as a Member to this GenericConn group present there. Please guide me.
Thanks,
$id

I mapped the adapter variables as follows:
User ID to Usr Key of User data
orclguid to LDAP GUID of User data (I have LDAP Sync enabled in my OIM)
PDataOrg to LDAP DN of User data
GroupDN to literal value cn=GenericConn,cn=Groups,cn=new,cn=test,cn=com
OrganizationDN to literal which is not populated with any value (same existed in the original AddUserToGroup task of OID Connector)
And all other adapter variables apart from these to the Process Instance -> OID Server -> corresponding attribute details while mapping
However when I provision the generic resource to the user, I get the task as rejected and the following error in the Resource History:
Response:     DATA_ERROR
Response Description:     Unknown response received
Error Details
Sep 12, 2012: Could not find IT asset value for Svr_key = 1985 and spd_key = 51.Setting task status... "DATA_ERROR" does not correspond to a known Response Code. >Using "UNKNOWN".In the OIM logs I see the following:
com.thortech.xl.dataobj.util.tcAdapterTaskException: DATA_ERROR
     at com.thortech.xl.adapterfactory.events.tcAdpEvent.getITAssetParam(tcAdpEvent.java:1996)
     at com.thortech.xl.adapterfactory.events.tcAdpEvent.getRunTimeValue(tcAdpEvent.java:936)
     at com.thortech.xl.adapterfactory.events.tcAdpEvent.getRunTimeValue(tcAdpEvent.java:682)
     at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpOIDADDUSERTOGROUP.implementation(adpOIDADDUSERTOGROUP.java:57)
     at com.thortech.xl.client.events.tcBaseEvent.run(tcBaseEvent.java:196)
     at com.thortech.xl.dataobj.tcDataObj.runEvent(tcDataObj.java:2493)
     at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(tcScheduleItem.java:2919)
     at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(tcScheduleItem.java:553)
     at com.thortech.xl.dataobj.tcDataObj.insert(tcDataObj.java:602)
     at com.thortech.xl.dataobj.tcDataObj.save(tcDataObj.java:474)
     at com.thortech.xl.dataobj.tcORC.insertNonConditionalMilestones(tcORC.java:844)
     at com.thortech.xl.dataobj.tcORC.completeSystemValidationMilestone(tcORC.java:1162)
     at com.thortech.xl.dataobj.tcOrderItemInfo.completeCarrierBaseMilestone(tcOrderItemInfo.java:735)
     at com.thortech.xl.dataobj.tcOrderItemInfo.eventPostInsert(tcOrderItemInfo.java:172)
     at com.thortech.xl.dataobj.tcUDProcess.eventPostInsert(tcUDProcess.java:236)
     at com.thortech.xl.dataobj.tcDataObj.insert(tcDataObj.java:602)
     at com.thortech.xl.dataobj.tcDataObj.save(tcDataObj.java:474)
     at com.thortech.xl.dataobj.tcTableDataObj.save(tcTableDataObj.java:2906)
     at com.thortech.xl.ejb.beansimpl.tcFormInstanceOperationsBean.setProcessFormData(tcFormInstanceOperationsBean.java:710)
     at com.thortech.xl.ejb.beansimpl.tcFormInstanceOperationsBean.setProcessFormData(tcFormInstanceOperationsBean.java:426)
     at Thor.API.Operations.tcFormInstanceOperationsIntfEJB.setProcessFormDatax(Unknown Source)
     at sun.reflect.GeneratedMethodAccessor8619.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37)
     at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
     at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
     at $Proxy377.setProcessFormDatax(Unknown Source)
     at Thor.API.Operations.tcFormInstanceOperationsIntfEJB_h6wb8n_tcFormInstanceOperationsIntfRemoteImpl.__WL_invoke(Unknown Source)
     at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:40)
     at Thor.API.Operations.tcFormInstanceOperationsIntfEJB_h6wb8n_tcFormInstanceOperationsIntfRemoteImpl.setProcessFormDatax(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:85)
     at $Proxy178.setProcessFormDatax(Unknown Source)
     at sun.reflect.GeneratedMethodAccessor8618.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
     at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:198)
     at $Proxy376.setProcessFormDatax(Unknown Source)
     at Thor.API.Operations.tcFormInstanceOperationsIntfDelegate.setProcessFormData(Unknown Source)
     at com.thortech.xl.webclient.actions.DirectProvisionUserAction.handleVerifyProcessData(DirectProvisionUserAction.java:2077)
     at com.thortech.xl.webclient.actions.DirectProvisionUserAction.goNext(DirectProvisionUserAction.java:363)
     at sun.reflect.GeneratedMethodAccessor6536.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:269)
     at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(tcLookupDispatchAction.java:133)
     at com.thortech.xl.webclient.actions.tcActionBase.execute(tcActionBase.java:894)
     at com.thortech.xl.webclient.actions.tcAction.execute(tcAction.java:213)
     at org.apache.struts.chain.commands.servlet.ExecuteAction.execute(ExecuteAction.java:58)
     at org.apache.struts.chain.commands.AbstractExecuteAction.execute(AbstractExecuteAction.java:67)
     at org.apache.struts.chain.commands.ActionCommandBase.execute(ActionCommandBase.java:51)
     at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:191)
     at org.apache.commons.chain.generic.LookupCommand.execute(LookupCommand.java:305)
     at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:191)
     at org.apache.struts.chain.ComposableRequestProcessor.process(ComposableRequestProcessor.java:283)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1914)
     at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:463)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
     at com.thortech.xl.webclient.security.CSRFFilter.doFilter(CSRFFilter.java:78)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
     at oracle.iam.platform.auth.web.PwdMgmtNavigationFilter.doFilter(PwdMgmtNavigationFilter.java:122)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
     at oracle.iam.platform.auth.web.OIMAuthContextFilter.doFilter(OIMAuthContextFilter.java:108)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
     at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Please let me know if a mapping is wrong somewhere out of the above mappings.
Thanks a lot,
$id

Custom Script Execution with 11.1.1.5.0 Exchange Connector

Folks ,
We would be cloning the 11.1.1.5.0 Exchange connector to support 2 different kind of mailboxes in Exchange server 2010 SP2.
The 2 kinds of mailboxes are Personal mailbox and a reference mailbox (similar like a personal mailbox , the only difference is that Auto-reply will be set on this mailbox).
OOTB Exchange connector will be used to create both of these mailboxes . However we want to set auto-reply only on reference mailbox using a powershell cmdlet
http://technet.microsoft.com/en-us/library/dd638217.aspx
So i would like to understand , does the connector provide such a capability to execute a cmdlet from a provisioning process via a process task or some other mechanism .
Thanks
Sid

Thanks Rahul , I have gone through the documentation .
But i dont understand , when doc mentiona you can execute a script before/after a user is created , so is this based on the event on the target after/before a mailbox is created or its triggerd from the create user task in OIM .
As i have 2 clones of exchange connector and both create mailboxes, i want invoke the script in 1 scenario and dont want to execute the script in other scenario .
thanks
Sid

Provisioning status of exchange connector is shows waiting in oim 11g r2

Similar Messages

Maybe you are looking for