Proxy error when downloading report (IR) in csv format
I'm getting the error below when downloading IR report in csv format. I'm getting that whenever the records is more than 108,000. Is there a limit in records to download? Is there a resolution.
I am using apex 4.1, EXCEL 2010.
Thanks,
Pinky
Since it is a text file it should have no limits within reason..
See if you can recreate issue on Oracle's hosted site..
Simple test, build a standard report on a table that has 101,000 rows and try downloading and then build a IR report on same table..
Thank you,
Tony Miller
Dallas, TX
Similar Messages
-
Proxy error when running reports in Infoview
We are running XI 3.1 sp4 and are getting a Proxy error on some reports when running in PDF mode. Any ideas?
Here's the error:
Proxy Error
The proxy server received an invalid response from an upstream server.
The proxy server could not handle the request GET /AnalyticalReporting/ViewAsPDF/Disposition Analysis Report.pdf.
Reason: Error reading from remote server
Apache Server at preprod.nalts.com Port 443Hi Sylvia,
It seems that the reverse proxy you are using: Apache could have problems with the sessions of the users. I have seen the same behaviour with other Load Balancers. If you have different WAS in the backend, make sure they stay with the same WAS (session affinity).
Regards,
Julian -
Show user entered date when ssrs report exported to csv format
Hi All,
How can I show date range parameter entered by user when ssrs report is exported to csv format.
my csv output should look like this....
Date : 01/01/2015 TO 01/31/2015 (user selected dates)
ID,EmpFirstName,EmpLastName,Location
1,Tom,Garry,NY
2,John,Graham,NJ
3,Ron,Lorrie,CA
Thanks,
RH
sqlHi RH,
You can add two textbox at the top outside the tablix and using expression to get the parameter value use have selected to display in the textbox as blew:
TextBox1: =Parameters!Date.Value
TextBox2: =Parameters!To.Value
For Multiple value parameter you can use the expression like : =Join(Parameters!Date.Value,",")
You can rename the two textbox' name in the properties as "Date" and "To" then the two textboxs will display like belkow in the CSV report:
Date TO
01/01/2015 01/31/2015
ID EmpFirstName EmpLastName Location
1 Tom Garry NY
2 John Graham NJ
3 Ron Lorrie CA
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support -
Scientific Notation when Downloading Reports
When downloading reports from a web template, in either Excel or CSV, some values are getting converted to scientific notation in the downloaded file. I am wondering if there is a setting which prevents any data to be converted to scientific notation when downloading. The data appears to be fine when viewing the report in Web.
Hi Ripel
You have downloaded the file to CSV which is also excel based format and uses most of the Excel's features, and when data is CSV file is in scientic foirmat , same will come in notepad..just do one thing select the format as number in the csv file by selecting column...and save it...in csv/notepad you will now see actual value
Thanks
Tripple k -
HAD AN ERROR WHEN DOWNLOADING QUICKTIME THIS MORNING NOW ITUNES SAY ITS CLOSED ??? RUNNING VISTA
Found the solution! Hooray!
Noticed a suggestion on this thread:
http://discussions.info.apple.com/message.jspa?messageID=11731496#11731496
To look in the ~/Library/iTunes/Mobile\ Backups folder to find the Manifest.plist folder, and delete entries for apps that might be causing the problem.
I remembered that a little while ago, I had started getting an error message while syncing and updated app (Sleepmaker or something- couldn't remember which, precisely, but knew that it was a white noise app). So, I went to the Manifest.plist folder, and removed the entries for the couple different flavors of the Sleepmaker app that I had installed.
Then, reconnected the iPhone, and clicked "Continue Restore" once again when it reported that there had been an interrupted restore. This time, it went through fully! Took quite a while (~1 hr) to copy all my media onto the phone, but now it's all there! Hopefully this will help others who might in the same situation... -
Error when sending report output to printer from Forms 10g
Hi,
I have a simple report that I am running from a form using run_report_object built-in. I can successfully send the report output to a file but when I send the report output to a printer my report is
terminated with report status of 'TERMINATED_WITH_ERROR'. I am using the default forms service and reports server that comes with the forms builder. How do I specify the reports server to user my default network printer ?Following is the code that runs my report.
Thanks,
Anna
PROCEDURE SEND_TO_PRINTER IS
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(50);
rep_server system_variables.reports_server%type;
alldone exception;
BEGIN
select reports_server
into rep_server
from system_variables;
if rep_server is null then
msg_alert('Error getting the reports server name', 'I', FALSE);
raise alldone;
end if;
:ctrl.run_report_errors := 'N';
repid := find_report_object('REP_OBJ1');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,rep_server);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,BATCH);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
IF :ctrl.rg_print = 'P' THEN
--Send the output to printer.
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,PRINTER);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'dflt');
ELSIF :ctrl.rg_print = 'R' THEN
--Rich Text Format
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,FILE);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'rtf');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESNAME,:ctrl.filename);
END IF;
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' THEN
null;
ELSE
:ctrl.run_report_errors := 'Y';
msg_alert('Error when running report.' || rep_status, 'I', FALSE);
END IF;
EXCEPTION
when no_data_found then
msg_alert('Error getting the reports server name', 'I', FALSE);
when alldone then
null;
END;If you use Windows the user that runs the reports server is usually LocalSystem. Check this in the Windows Services panel.
LocalSystem has no printer access. To be able to print, you have to use a real domain user that has access to the printer. So, change the Log on properties in the Services panel. -
Adobe Reader error when downloading a Form (IMM5257E - required for CIC - Canadá)
I received an error when downloading a file viwh the Adobe Reader version 11.0.07.
A message like this appear:
To view the full contents of this document, you need a later version of the PDF viewer.Pat Willener!
GREAT THANKS! GREAT THANKS! GREAT THANKS!
I was using Google Chrome, and did not suspect that this could be the
problem.
I used I.E. and the download worked. So that's it.
Great thanks again.
Vilson Drehmer
Rua Balduíno Pedro Vier, 693
CEP 95.880-000 - Estrela - RS
Fone: (51) 8401.2253
E-mail: [email protected] <[email protected]>
CRA-RS 6364
2014-05-28 5:26 GMT-03:00 Pat Willener <[email protected]>:
Adobe Reader error when downloading a Form (IMM5257E - required for
CIC - Canadá) created by Pat Willener<https://forums.adobe.com/people/pwillener>in *Adobe
Reader* - View the full discussion<https://forums.adobe.com/message/6414530#6414530> -
Having a constant error when downloading latest update for Illustrator CC, error message:
Adobe Illustrator CC Latest Updates (December 2014) Installation failed. Error Code: U44M1P7U44.. update error http://forums.adobe.com/thread/1289956 may help
-more U44.. discussion http://forums.adobe.com/thread/1275963
-http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
-http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html -
I have a A12E6 error when downloading and installing apps
I have an
A12e6 error when downloading and installing apps yesterday i had the A12e1 error so i used the cleaner tool and did a new install but today again i have an arror A12e6
Do you have a solution for me???? (mac osx 10.7.5)
kind regards AroldHi Arold,
Welcome To The Forums
http://forums.adobe.com/thread/1197816 or http://forums.adobe.com/thread/1291134 may help,
Thanks!
Eshant -
How can I get rid of a 1202 error when downloading products from itunes
How can I get rid of an 1202 error when downloading products from itunes?
You have probably downloaded the Norton program which is one of the least desirable helpmates you can invite in.
Read this thread and follow the suggestions by Thomas R, one of our gurus in this field.
https://discussions.apple.com/message/20005609#20005609 -
I get error when downloading books
After oppressing my iPad I started to get error when downloading books on iBook . It looks that book is downloaded, bu I miss most of the pages, and ther is several pages were it sayes error and page is missing. This happens to all of the book I try to download, even the ones I downloaded from before.
Does engine know what to do?Please repost here: http://forums.adobe.com/community/adobe_digital_editions
-
I get this error when downloading key not valid for use in specified state what do i do
i get this error when downloading key not valid for use in specified state what do i do
What is your operating system? What are you trying to download?
-
Report Designer - Error when Loading Report
Hi,
We have created a report in Report Designer (7.0) and saved it. When we execute it runs fine. After closing the report and trying to reopen it, the report does not open. It gives an error "Error when Loading Report". Our BI frontend patch is 14.
Did anyone encounter this issue and is there a solution to this.
Thanks
HemantHello,
Please go to SE38 -> RS_REPORT_MAINTAIN,
Type your report name, and DT als "Report Type".
Goto edit mode, copy&paste this XML into txt file and send it to me ([email protected]). I will check whats going on with this report. Loading should be always possible.
Regards, Karol Kalisz, BI Development -
Error when downloading application from Server
Hi,
I have installed MI Client 7.0 SPS 11 Patch 0 on Symbol Device ;OS Windows Mobile5.0
i have successfully completed <b>first</b> synchronization .
After that i assigned Mobile Component to the device and tried synchronizing.
"Error when downloading application from http://<servername>:50000/meContainerSync/servlet/com.sap.ip.mi.http.MobileComponentServlet?Application=xyz&Type=APPLICATION&Runtime=JSP"
Pl. suggest
Note: In NWA under 'Device Maintenance' -> Mobile component
The state of the aplication is <b>"Deployment Activated"</b>
rgds,
Kiran Joshua
Message was edited by:
Kiran JoshuaHi ALL,
I resolved it on my own guys !!!
Actually while downloading server url consists of hostname bcoz the hostfile entry in windows/system32/drivers/etc/hosts was only hostname.
i entered FQDN name in the hostfile... It WORKED
Being Saturday and Sunday...i cud not get any help from forums...i was really worried and Guys we need to think on this :-?
rgds,
Kiran Joshua -
Error when linking report to stored procedure defined with one input parm
Error when linking report to stored procedure defined with one input parameter
The report will work ok, when the parameter is removed from the stpred procedure
An unhandled win32 exception occurred in crw32.exe[4480]
Stored Proc (sql server 2005)
USE [Allegro]
GO
/****** Object: StoredProcedure [dbo].[SP_Test] Script Date: 07/08/2009 10:42:14 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER procedure [dbo].[SP_Test](@valuationmode VARCHAR(55)) as
Begin
select
valuation,
valuationtime,
valuationmode
from valuation
where valuationmode = @valuationmode;
End;This is an example of a stored procedure that is trying to be linked to a new report as the only datasource.
If I remove the parameter I can create a report, however this will return all of the results of thw query to the report, rather than the desired results. If I add the parameter on the Crystal Report, the stored procedure then has to return all of the results to Crystal and then perform the filtering of records. By using a parameter in the stored procedure, you should be able to do all of the filtering as part of the query on the databse server, making this more efficient.
Maybe you are looking for
-
Problem with Multiple Versions of the Same Activex
Hi, I Installed some "ABC" Activex 9.5 version and 10.1 version in the system. I have ASP.net webpage which should use only 9.5 version of Activex. But by default 10.1 version is active and invoking by webpage. Is there any way to enforce from webpa
-
After Effects CC 2014 - Rendering / saving project file to CS6
Hello all, I'm writing here to try to understand the st**** decision to exclude mp4 and mpeg from the render possibilities from After Effects CC 2014. I would gladly go back to CS6 but as of now I have more than 40 hours of edited video project in CC
-
Extending WebCenter Spaces 11.1.1.3: Creating New Page - IGNORE DUPLICATE
Hi all, I am attempting to create a new group space page template for Spaces that has a floating div on the right side that will have content wrap around it. It should look similar in concept to the image in this link: http://css.maxdesign.com.au/flo
-
I am trying to upgrade to 6.05, but evertime i get to the window with the girl and the guy where it says "ipod + itunes, meant to be together" and i press next, nothing happens and my window freezes. How do i get passed this?
-
Modifying Infoview web.xml
i am modifying infiview web.xml but changes are not reflectin. just to test i changed home page to say aaa.com and restarted server. it should throw error but it is not...anybody can help me? thanks in advance