Proxying and Multiple PO's

Using SOAP is it possible for a user A located on PO A to proxy to user B which is on PO B?
From my testing I an unable to get it to work.
If I login user A into PO A and then try to proxy to user B on PO A I get a "user not a post office" error. Or if I try to connect to PO B at that point I get a "Missing session string" error even though I include the correct session string.
Thanks
Chris

It is not possible to proxy to a user on a different post office.
There is an outstanding bug on that, but the likelihood is slim
that it will be fixed. The only workaround is to use trusted
application.
Preston
>>> On Thursday, January 07, 2010 at 3:51 PM, Christopher
Kintner<[email protected]> wrote:
> Using SOAP is it possible for a user A located on PO A to proxy to user B
> which is on PO B?
>
> From my testing I an unable to get it to work.
>
> If I login user A into PO A and then try to proxy to user B on PO A I get
a
> "user not a post office" error. Or if I try to connect to PO B at that
point
> I get a "Missing session string" error even though I include the correct
> session string.
>
> Thanks
> Chris

Similar Messages

Single Reverse Proxy and multiple Office Web App Servers

Hi all,
I have recently installed a new office web apps server pool in my new location and configured it in my Lync topology as well.
I have a single Reverse Proxy (IIS ARR). Inside my Reverse Proxy I have created a new web farm for my new web apps server. The configuration of old web apps server. I have copied the settings from my old web app's web
farm in IIS including its Inbound rule regular expression.
Now when I try to upload a powerpoint as an external guest hoping to hit my new web apps server, my reverse proxy tries to hit my old office web apps server and no traffic is sent from reverse proxy to new web apps.
my reverse proxy shows the health of the new farm as healthy.
should the inbound rules be different for these farms in reverse proxy?
Any suggestions are welcomed.
Thanks,

Hi,
In addition to Luca's comment in order to determine if the farm is actually working correctly in the first instance, did you disable or remove the old server farm?
Can you also confirm that there are no static routes in place on the IIS ARR box?
Kind regards
Ben
Note: If you find a post informative, please mark it so using the arrow to the left. If it answers a question you've asked, please mark the thread as answered to aid others when they're looking for solutions to similar problems or queries.

Proxy and Multiple files

Hi,
I am working on a Scenario Proxy-XI-File. I have four files to be gnerated. Can you please tell me then will I have to write 4 programs in ABAP or one program can take care for four proxy generation for 4 different files.
Regards
R

Hi,
Only one program could be sufficient to call the Proxy 4 times for different files. In Outbound Program you need to call the Execute_Synchronous method. The no of times you will call it he no of Porxy callls can be possible. It have internal commit statement.
Thanks
Swarup

RWS.Proxy and ECP.Proxy health checks, localhost, and SSL

RWS.Proxy and ECP.Proxy health sets are both failing. In both of the errors, I find the following:
[000.000] Starting HTTP request task
[000.000] Waiting 59000 ms
[000.000] Issuing GET against https://localhost/ecp/
[000.000] Awaiting GET response
[000.000] Performing SSL validation
[000.000] Performing SSL validation
[000.000] Failed with exception: The underlying connection was closed: An unexpected error occurred on a receive.
[000.000] Starting HTTP request task
[000.000] Waiting 59000 ms
[000.000] Issuing GET against https://localhost/ecp/ReportingWebService/
[000.000] Awaiting GET response
[000.000] Performing SSL validation
[000.000] Performing SSL validation
[000.000] Failed with exception: The underlying connection was closed: An unexpected error occurred on a receive.
We require SSL on all connections. We use a third party certificate with multiple SANs. Since the probe is trying to use https://localhost, it fails because the name doesn't match.
I figure I have a few options: first, is there a way to change the URL that the probe uses to check. This seems to me to be the 'rightest' way I could fix this. Second could I alter the binding of the site so that the localhost hostname uses a dedicated,
self signed, trusted cert? Last, is there any way to simply disable the specific probes? We're a single server low volume setup and I'm not convinced that I need the probes anyway.
IS this a common issue? Outside of the warnings that SCOM throws at me, it is also causing a large volume of logs to be generated.
Justin Cervero - MS Enterprise Admin - Appalachian State University

Hi,
I am afraid it’s hard coded. Just like the “Test-Outlookwebsiervices” command, it will also try the “localhost” and reports errors about certificate host name mismatch issue.
We can safely ignore this report.
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

I have one apple ID and multiple family members share this with their devices. How do we keep pics and messages separate?

I have one apple ID and multiple family members share this with their individual devices. How do we keep pics and messages separate for each device?

For messages
MacMost Now 653: Setting Up Multiple iOS Devices For Messages and FaceTime
For other issue:
How to use multiple iPods, iPads, or iPhones with one computer
What is the best way to manage multiple...: Apple Support Communities

Connection Problem while client is behind proxy and server out side proxy

hello
i implemented ChatApplication in JAVA, for that i used socket connection when client and server both are in same network then it's working fine.
but when my server is on internate and client is behind proxy and try to connect with server
it not able to connect i get exception.
i serch most of forum i got same answer and i try it but i was not success.
any kind of help is appriciated.
i attached my code(which i implement for testing ) pls reply me
thanks in advance.
Server.java
import java.lang.*;
import java.io.*;
import java.net.*;
class Server {
   public static void main(String args[]) {
      String data = "you are successfully connected with server.";
      try {
         ServerSocket srvs = new ServerSocket(1234);
         Socket skt = srvs.accept();
         System.out.print("Server has connected!\n");
         PrintWriter out = new PrintWriter(skt.getOutputStream(), true);
         System.out.print("Sending string: '" + data + "\n");
         out.print(data);
         out.close();
         skt.close();
         srvs.close();
      catch(Exception e) {
         System.out.print("Whoops! It didn't work!\n");
ProxyClient.java
import java.io.*;
import java.net.*;
import java.util.*;
class ProxyClient{
   public static void main(String args[]) {
     String host="61.17.212.29";
     int port=1234;
           String line;
     Properties properties = System.getProperties();
     /*properties.put("firewallSet", "true");
     properties.put("firewallHost", "192.168.0.1");
     properties.put("firewallPort", "808");*/
     properties.put("socksProxySet","true");
     properties.put("socksProxyHost", "192.168.0.1");
     properties.put("socksProxyPort", "1080");
     System.setProperties (properties);
     try {
     /*SocketAddress addr = new InetSocketAddress("192.168.0.1", 1080);
     Proxy proxy = new Proxy(Proxy.Type.SOCKS, addr);
     Socket skt = new Socket(proxy);
     InetSocketAddress dest = new InetSocketAddress("61.17.212.29",1234);
     skt.connect(dest);*/
         System.out.println("before socket taken");
         Socket skt = new Socket(host,port);
         System.out.println("after socket taken");
         BufferedReader networkBin = new BufferedReader(new InputStreamReader(skt.getInputStream()));
         System.out.println("Received string: '");
         line = networkBin.readLine();     // Read one line
      while(true)
             System.out.println(line);     // Output the line
             line = networkBin.readLine(); // Read the next line, if any
      catch(Exception e) {
         System.out.print("Whoops! It didn't work!\n");
     e.printStackTrace();
}

Now look here. I could not care less about this
code. I don't know anything about it, I don't
want to know, I have already recommended you don't
use it, and I have also given you a simpler and
better solution. If you don't want to take my advice
that is your privilege and your problem.ya i has understand system propertis i have setted and u can see it in the code i have tried by both system properties and also J2SE 5.0 proxy class but i got a same problem malformed Exception server refuse to connection.
is there any problem at sever side?
can u tell me in which way u r teling to set the propery i m looking forward for ur reply.
ya i m sure u will give me.................reply "ejp".
Thnx in advance.

Sun Web Server Reverse Proxy and Weblogic HTTP to HTTPS redirection

Hi,
I am currently testing reverse-proxy from SJSW 7.0 update 5 to Weblogic server but I have encountered an issue.
I have configured a context root to be forwarded to weblogic:
Web Server: www.server.com
URI: /path
Reverse Proxy URL: wlserver:9000
When I access https://www.server.com/path, I am getting the correct page. The issue is, the weblogic server is configured to redirect HTTP access to HTTPS, i.e., when I access http://www.server.com/path, it should be redirected to https://www.server.com/path. However, that is not the case. What happens is that I am being redirected instead to https://www.server.com/.
If I don't use reverse proxy, that is, if I use the libproxy.so from weblogic, I get the correct redirection.
Would appreciate it very much if someone can help me troubleshoot this issue.
Thanks in advance!
Edited by: agent_orange on Jul 29, 2010 2:30 AM
Edited by: agent_orange on Jul 29, 2010 2:31 AM

I am not sure, how you have configured your reverse proxy since you didn't attach / refer your current configuration file. this is how I would do it..
- create a new configuration (using web server 7 admin gui , within configuration wizard, disable java option if you plan to use web server 7 only for reverse proxy)
- select this new configuration and go to reverse proxy and try to reverse proxy / to the origin server.
that is all it should need.
your obj.conf or <hostname>-obj.conf depending on your configuration should look like following snippet
<Object name="default">
AuthTrans..
NameTrans fn=map from="/" to="/path" name="reverse-proxy-/"
</object>
<Object name="reverse-proxy-/">
Route fn=....
Service ..
</Object>
this is all you should need..
However, if you wanted to add complexity to your configuration, you could do some thing like
<Object name="default">
Auth..
<If defined $security>
NameTrans fn=map from="/" to="/path" name="reverse-proxy-/"
</If>
</Object>
<Object name="reverse-proxy-/">
Route...
</Object>

Problem with proxy and DNS

Hello,
in our company we use Internet Explorer 8... (i know...) We also have a proxy and 4 DNS servers. Last weekend we suddenly had an issue where internet pages could not be loaded. When we did some testing with Wireshark we saw that it took a long time to query
www.google.com or www.microsoft.com. The query went from the first DNS server to the second and so on. This behaviour was shown on Windows 2008 R2 servers with Citrix and also the workstations and laptops with Windows 7.
When we deleted the DNS servers from the network settings and set the proxy ip-adres in the browser the problem was solved. So the problem had to be in DNS.
After that we deleted the list of Root Hints and the problem seemed to be solved. However, when we look in wireshark we still see that external addresses are queried againts our local DNS servers. In internet explorer we have a policy active where the proxy
is set. We have two proxies and the problem exists with both of them.
So the question is, why does IE8 still query all four DNS servers even when we have a proxy? Why is there a lot of delay there?
Thanks!

Hi,
Generally, if you configure IE with an explicit proxy:
1.User types an address
2.The address is checked for string matches against the IE proxy exceptions list
a. If matching a bypassed entry, DNS is used to resolve the name, and the client connects directly to the target IP address on port 80 (assumed), then sends a request like:
GET /something.htm HTTP/1.1
Host: fulldomainame.example.com
b. If non matching, continue
3.The client connects to its configured proxy and sends a request of the form:
GET http://fulldomainname.example.com/something.htm HTTP/1.1
(this use of the FQDN in the URL is one way you can tell that a client thinks it's talking to a proxy instead of a real web server)
4.The proxy resolves the name, connects to the target site, etc, etc
So what’s your configuration of proxy?
Alex Zhao
TechNet Community Support

New 13" Macbook Pro trying to connect to a Panasonic VIERA TC-L42U30 as second monitor. I've used multiple hdmi-thunderbolt/mini displayport adapters and multiple hdmi cables and still no success. The Macbook does not sense the second monitor (TV). Help?!

I've been a Mac since 2008, so I know my way around the system pretty well. This issue, however, has me stumped. I had an iMac until now and only now am I experiencing some difficulty with my new MacBook Pro. The model I have is the newest 13" Macbook Pro model and I'm trying to connect a Panasonic VIERA TC-L42U30 42" HDTV as a second monitor via the Thunderbolt port.
It worked the first two times and hasn't worked since, after 10-15 attempts with different configurations, turning things on n off, restarting the mac, unplugging the cables, adapters, TV, resetting the P RAM, etc... I've used multiple hdmi-thunderbolt/mini displayport adapters and multiple hdmi cables and still no success. No matter what I do, the Macbook does not sense the TV as a second monitor anymore.
I took the MacBook Pro to the Apple Store, and their "genius" there had it working fine with a DVI connection to a regular monitor. The Panasonic TV I have has HDMI connections and one VGA connection which does not support HD, but no DVI option. I want an HD connection to mirror or extend my MacBook Pro screen. At the Apple Store, they didn't have a Thunderbolt/Mini DisplayPort to HDMI adapter, so he could not try that out for me.
Anyone else have this configuration or another similar one with a Panasonic HDTV?
Ideas? Suggestions? Anything?! Help!!
P.S. I'm running Mountain Lion, if that wasn't already obvious. Everything is up to date in my App Store as well.
Thanks!

Hi There,
I have had the exact same issue but with a projector.
The issue lies with Mountian Lion 10.8.2.
I tried many a combination with no luck to get HDMI working.
Took my mac into the apple store and came to the conclusion it was the software, so I asked them to install 10.8 onto it (this is destructive so a backup is a must)
Bought my macbook home and voila, now displaying through my projector.
There is a small graphics update after 10.8.1 which seems to be the cause.
Hope this helps.
Thanks.

Hello, I have iMac from Oct, 2010 and have OS 10.6.7 and multiple users. Mail icon was accidently removed along with program. Mail 4.4 is on other users but when I reloaded software my user got Mail 4.3. Mail 4.3 did not work with latest OS. Ideas?Matt

Hello, I have iMac Itel i3, from Oct, 2010 and have OS 10.6.7 and multiple users.
About 3-4 days ago the Mail icon in dock had question mark and was accidently removed, along with program on my user. Oops.
1. Mail 4.4 is on other users and works fine, but for me it does not work and tells me V4.3 does not work with latest OS X.
2. I reloaded software from my user with original disks (Oct, 2010) and got Mail 4.3 again. Mail 4.3 did not work with latest OS. I am unable to load Mail. Gives Yellow error message.
" You have Mail version 4.3 (1081/1084). It can’t be used on Mac OS X Version 10.6.7 (Build 10J869). For more information, click the Help button."
3. Tried to update software and look for update for mail 4.3 on Apple site to no success.
Hate to go to MS-Entorage ( I may need to learn something new and alien) mail program since contracts are in Mail/Address Book.
Ideas?
MattDeeds

Matt,
I would download and run the 10.6.7 combo update.
http://support.apple.com/kb/DL1361
Regards,
Captfred

JMS proxy and XA connection factory

Hi all,
I would like to ask you what is the best practice to adopt about the scenario described below.
A JMS proxy retrieves a message and processes it.
Any error could occurr during processing it and, in case of errors, the JMS proxy error handler publishes the message on ad hoc recovery destination D.
(later another app will check failed messages for fixing & republishing them into ALSB).
In that scenario we have the JMS proxy and the jms business service that, in case of errors, publishes on destination D.
Should the JMS proxy and the business service use both a XA connection factory in order to perform all the above steps in one transaction ?
Otherwise if the business service itself fails publishing on destination D, the message retrieved by the JMS proxy is lost and not re-delivered to the JMS proxy.
Or XA connection factory is not needed and could I use
Routing Options with exactly once or both are needed ?
Thanks
ferp

Hi all,
I did some tests and follow what I've achieved.
Scenario 1.
- Precondition
-- A JMS proxy with XA factory + Error Destination (MyRecoveryQueue)
-- A business service BS with XA factory that publishes into MyOutboundQueue
-- No "exactly once" routing option used calling BS
-- an error is forced in the pipeline
- Flow
-- proxy retrieves a message and try to publish it using BS
-- an error is forced in the pipeline:
--- transaction is rolled back, message redelivered to proxy
--- the message is posted to the error destination after all the retries failed
Scenario 2.
- Precondition
-- As 1. but no error is forced in the pipeline
-- the MyOutboundQueue destination queue is paused
- Flow
-- proxy retrieves a message and try to publish it using BS
-- BS fails to publish it on MyOutboundQueue (because it is paused)
--- transaction is rolled back, message redelivered to proxy
--- the message is posted to the error destination after all the retries failed
Scenario 2A.
- Precondition
-- As 2. with MyOutboundQueue paused and resumed
- Flow:
-- proxy retrieves a message and try to publish it using BS
-- BS fails to publish it on MyOutboundQueue (because it is paused)
--- transaction is rolled back, message redelivered to proxy
--- before all the retries failed the queue is resumed
--- BS succeeds to publish the message
Scenario 3.
- Precondition
-- A JMS proxy with NO XA factory + Error Destination
-- A business service BS with NO XA factory
-- No "exactly once" routing option used calling BS
-- an error is forced in the pipeline
- Flow
-- proxy retrieves a message and try to publish it using BS
-- an error is forced in the pipeline:
--- transaction is NOT rolled back, message NOT redelivered to proxy
-- so
--- no message delivered to MyOutboundQueue2 destination
--- no message delivered to MyRecoveryQueue2 destination
--- message consumed from MyQueue2 and now is lost!
To publish message into MyRecoveryQueue2 a proxy error handler has to be added and here added explicit publish to MyRecoveryQueue2.
But naturally in that case if in the proxy error handler, the explicit publish fails or any error occurrs no message is delivered to recovery queue.
So if I'm not using an XAFactory the message is auto-acknowledged as soon as it is read and I've to use XA factory if I want the message to be put back in the queue in case of errors and the retry to happen.
So both my proxy service and business service use an XA factory.
Regards
ferp

Can I use one itunes account for multiple users and multiple devices

Can I use one itunes account for multiple users and multiple devices?

The iTunes EULA, as I understand it (I'm not an attorney )for Apps is basically that one person can use an App multiple devices, or multiple people can use an App one device..so one to many or many to one, but not many to many....

How to bundle a .FLA and multiple .SWF files in one .EXE?

Hi,
I have a .FLA file which uses loadMovieNum() to load various
.SWF files when each one is called by the user clicking on a
button. Each .SWF file also uses loadMovieNum() to call a second
.SWF file. When I publish the .FLA file as a .SWF file it all works
beautifully.
Now I need to package the entire project into a Windows
projector .EXE file for offline use on a computer without the Flash
Player. When I publish the main .FLA file as a .EXE file, the .SWF
files still load, although they blink before fully loading and
displaying steadily.
What I would really like to do is to bundle all the .SWF
files into the .EXE file so when I send the finished project to the
end user, they only have to deal with one file, rather than a
folder with the .EXE file and multiple .SWF files.
Is there a way to do this?
I am using Flash 8 Professional.
Thanks,
Cam

Since this isn't going to be web-based, why not include all
the external swf files into the same Flash file and then use
attachMovie?
This will allow you to create one .exe file that would
contain EVERYTHING. Since you aren't worried about loading speeds,
you don't have to load the movie clips, but can simply create one
large Flash file.

One premium account and multiple Skype HD devices

Will one Premium account and multiple non premium HD accounts work for video calling? Basically the idea is 10 HD skype devices, the set top boxes connected to tvs will dial into one Premium Mac or PC account for multiple video conferencing.

Yes, one user needs to have a Group Video Calling subscription.
Unfortunately, not all devices support Group Video calling (TV's for example, do not).
Please see our website for more information: http://www.skype.com/en/features/group-video-chat/.

HT4137 iCloud setup with one Apple ID and multiple devices

iCloud setup with one Apple ID and multiple devices

What, exactly, are you trying to do? You can use the same iCloud account on as many devices as you want, as long as you don't turn on iTunes Match. Once you turn on Match, you're limited to 10 devices total.
Is this what you want to do...same iCloud account, but different iTunes/App store accounts on each device? If so, you can do that also.

Proxying and Multiple PO's

Similar Messages

Maybe you are looking for