PRS-650 multiple issues

The main issue that I'm having is that sometimes when I power off the device it refuses to come back on. Usually in regards to coming back from sleep mode. Then, I'll connect it to my computer to see if that helps and I'll get an error saying it's not recognized. I diddle around for a few minutes, hit the reset button, and bam it works again. Recently, it refused to turn on, and every time I hit the power button a red light flashed. When I tried to plug it into my computer, not even an error. My computer just would not recognize something was plugged in. Not even hitting reset helped. But low and behold, after a few minutes, it just happened to work. What the heck???

And NOW it's not charging. It's telling me it is charging. Heck, I had it plugged in for a couple hours and came back to it saying "Charge complete" so I unplugged it and turned it on... and it said "Battery low" and shut off. WTF?

Similar Messages

  • Sony eReader PRS-650

    not sure if this forum can help, but it's never failed me before....
    New Sony eREader PRS-650. Worked like a dream for the first few days but now every time I connect it to to mac the reader library software crashes and closes, so can't transfer the eBooks. It seemed to happen after asking it to Sync. Any ideas?

    Hi Sjennings,
    If your download has failed this could be caused by background running applications or security settings. To correct this issue please try the following.
    Reboot your PC and re-download again from your account (remember once you have purchased an ebook you do not have topurchases it again).
    If you are still getting an error, please try the following.
    Close all applications running in the background. This includes exiting/disabling items running in the system tray (you can close these by right clicking and selecting exit, disable or close from the menu).
    If you are trying to access the internet from a work PC or connection you may not have full access to the internet. Please check with your MIS/IT (Network Administrator) department to verify your access rights.
    If you are on a dial up connection please disable any download accelerators before attempting to re-download you eBook.

  • PRS-650 locks up library in windows 7

    I bought the prs-650 in late december and had problems from the start. Sony techs tried to tell me I was too dumb to charge it properly. After about a month went by they agreed to send me a new one. They sent a refurbished model and said that I did not contact them in the first 30 days (they conveniently neglected to log my first calls) so they said they had the right to replace it with a refurb. I got a new computer with Windows 7 and now the library locks up when I connect the reader. I followed all of the steps in the help topics and they told me by email that it must be a comm issue with the reader and I need to send it back for repair. After you stuck me with a refurb when I paid $230 for a new reader you are crazy if you think I am going to send you any more money to fix this lemon you sent me. I used to be one of your best advertisers singing the praises of Sony to anyone asking which brand I suggested. After being treated this way, I no longer recommend Sony readers and before I spend another penny on this one I will buy a nook or a Kindle. A reader is useless if you can't put books on it.

    Thank you for your post and welcome to the forum.
    I'm sorry that you had an unsatisfactory customer service experience with Sony - I would now suggest that you contact Sony's Customer Relations team and have them escalate the issue:
    http://esupport.sony.com/US/perl/contact-relation.pl
    If you require further product support I would recommend that you request the second tier of technical support.

  • Multiple Issues with Adobe Creative Cloud app.

    I'm having multiple issues with the Adobe Creative Cloud app.
    1. Neither Photoshop CC nor Prelude CC get past the 47% mark when installing. They constantly give me "Installation Failed" messages. When I click on "Learn More", I'm told that:
    "Installation Failed
    Errors during Installation.(7)
    More Information"
    So naturally, I click on More Information to get the following thrown at me (none of which I understand):
    Exit Code: 7 Please see specific errors below for troubleshooting. For example,  ERROR:   -------------------------------------- Summary --------------------------------------  - 0 fatal error(s), 2 error(s)    ERROR: 12/01/13 13:16:06:425 | [INFO] |  | OOBE | DE |  |  |  | 6076 | ---------- CustomHook_Helperx64 ---- Start ----------  12/01/13 13:16:06:426 | [ERROR] |  | OOBE | DE |  |  |  | 6076 | Cannot load function name 'CSInstallerCustomHookProc' from library C:\Program Files (x86)\Common Files\Adobe\Installers\uninstall\{5F816B76-62F3-41C9-B651-27F49F25F50B}.data. Error 0    ERROR: System check returned with error : -4  -------------------------------------------------------------------------------------
    2. I installed Lightroom 5, then uninstalled it. When I went back to re-install it, the Adobe Creative Cloud app wouldn't let me. It states that my Lightroom 5 is "Up to date" and is in my "Your Apps" section, not in the "Find New Apps" section. I've double checked my Programs and Features in Control Panel, and it's not there. I cleaned my registry, and it's still there. I deleted the "opm.db" file in my OOBE folder, and restarted CC - still nothing.
    I've got to say, guys. I'm not very happy with the amount of time I've spent just trying to install programs on my PC. While the plan is for this to be intuitive at some point, it's not very functional at the moment. Any help you can provide me would be amazing - if you can provide it sooner than later, I'd be over the moon.
    Thanks.

    I fixed it. I fixed it on my own. My journey took over a week (forty hours of back and forths, trial and error, and service!!) and included multiple calls, multiple online chats, unanswered forum posts, Twitter conversations with the Adobe Customer Service team, remote access sessions with Adobe technical teams, and finally this series of emails. In the end, I had to figure it out myself. I'm not happy - not with the time it took, and not with the level service I received based on the urgency that I made clear.
    For anyone else that had this issue (or similar), here is what I did to fix it. This may seem excessive, but that's because I didn't know what else to do. Some of these steps may be redundant, or not required... but I wouldn't know because once I saw that it was working, I just kept going.
    Anyway, here is the solution I came upon (I'm running Windows 7 64-bit):
    1) I uninstalled every single Adobe product (including Flash Player, Acrobat Player, Air, and Digital Editions).
    2) I ran the Cleaner Tool (which is not very good) and came across errors in trying to delete certain folders.
    3) I restarted my computer in Safe Mode, and logged into Windows 7 under my Administrator account.
    4) I manually went into every folder that contained the words "Adobe" and deleted everything. This includes my Program Data folder, my Program Files folders (both x86 and 64-bit), my AppData folders, my Roaming folders, my Temp folders - ANYTHING and EVERYTHING that contained any trace of Adobe, I deleted.
    5) I ran Microsoft Disk Cleanup and Piriform CCleaner to clean my registry and temp files.
    6) I restarted my computer using the normal boot process and logged into Windows as Administrator.
    7) I downloaded the Adobe Creative Cloud installer.
    8) I restarted my computer again, and logged into Windows as Administrator.
    9) I ran the Creative Cloud installer, and installed Premiere Pro.
    10) I restarted my computer again, and logged into Windows as Administrator.
    11) I ran the Creative Cloud installer, and installed Photoshop.
    12) I restarted my computer again, and logged into Windows as Administrator.
    13, 14, 15...) I ran the Creative Cloud installer and installed whatever programs I needed, then I IMMEDIATELY restarted my computer before installing anything else.
    Hope this helps. Good luck!

  • I have been having multiple issues lately with my iMac

    I have been having multiple issues lately with my iMac - starting with insanely slow processing/run speeds. 
    When I run Activity Monitor, consistently the highest usage of CPU is "ReportCrash" - typically shows up as 80-200% of CPU.
    What could this be caused by?
    I posted only a portion of the code from Activity Monitor but not sure what exactly is relevant or not.  I can certainly post more if it's needed.
    Many thanks!
    Analysis of sampling ReportCrash (pid 332) every 1 millisecond
    Process:         ReportCrash [332]
    Path:            /System/Library/CoreServices/ReportCrash
    Load Address:    0x10e14a000
    Identifier:      ReportCrash
    Version:         ??? (???)
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [1]
    Date/Time:       2013-04-23 18:17:29.753 -0400
    OS Version:      Mac OS X 10.8.3 (12D78)
    Report Version:  7
    Call graph:
        2492 Thread_6876   DispatchQueue_1: com.apple.main-thread  (serial)
        + 2492 start  (in libdyld.dylib) + 1  [0x7fff847cd7e1]
        +   2492 ???  (in ReportCrash)  load address 0x10e14a000 + 0xfb9c  [0x10e159b9c]
        +     2492 -[NSConditionLock lockWhenCondition:beforeDate:]  (in Foundation) + 235  [0x7fff815f1e39]
        +       2492 -[NSCondition waitUntilDate:]  (in Foundation) + 357  [0x7fff815f1fe3]
        +         2492 _pthread_cond_wait  (in libsystem_c.dylib) + 927  [0x7fff86326023]
        +           2492 __psynch_cvwait  (in libsystem_kernel.dylib) + 10  [0x7fff8b52f0fa]
        2491 Thread_6877   DispatchQueue_2: com.apple.libdispatch-manager  (serial)
        + 2491 _dispatch_mgr_thread  (in libdispatch.dylib) + 54  [0x7fff887179ee]
        +   2481 _dispatch_mgr_invoke  (in libdispatch.dylib) + 883  [0x7fff88717dea]
        +   ! 2481 kevent  (in libsystem_kernel.dylib) + 10  [0x7fff8b52fd16]
        +   8 _dispatch_mgr_invoke  (in libdispatch.dylib) + 134  [0x7fff88717afd]
        +   ! 4 _dispatch_mgr_thread2  (in libdispatch.dylib) + 43  [0x7fff887180a8]
        +   ! : 3 _dispatch_queue_drain  (in libdispatch.dylib) + 180  [0x7fff88716448]
        +   ! : | 2 _dispatch_queue_invoke  (in libdispatch.dylib) + 72  [0x7fff88716305]
        +   ! : | + 1 _dispatch_source_invoke  (in libdispatch.dylib) + 58  [0x7fff88717022]
        +   ! : | + ! 1 _dispatch_kevent_register  (in libdispatch.dylib) + 280  [0x7fff887173f4]
        +   ! : | + !   1 _dispatch_source_kevent_resume  (in libdispatch.dylib) + 63  [0x7fff88717513]
        +   ! : | + !     1 _dispatch_kevent_resume  (in libdispatch.dylib) + 92  [0x7fff88717588]
        +   ! : | + !       1 _dispatch_kevent_machport_resume  (in libdispatch.dylib) + 96  [0x7fff887175ec]
        +   ! : | + !         1 mach_port_move_member  (in libsystem_kernel.dylib) + 31  [0x7fff8b52e539]
        +   ! : | + !           1 _kernelrpc_mach_port_move_member_trap  (in libsystem_kernel.dylib) + 10  [0x7fff8b52d626]
        +   ! : | + 1 _dispatch_source_invoke  (in libdispatch.dylib) + 257  [0x7fff887170e9]
        +   ! : | +   1 _dispatch_kevent_unregister  (in libdispatch.dylib) + 286  [0x7fff887189ad]
        +   ! : | +     1 free  (in libsystem_c.dylib) + 199  [0x7fff8633a8f8]
        +   ! : | +       1 szone_free_definite_size  (in libsystem_c.dylib) + 211  [0x7fff8634012c]
        +   ! : | +         1 _spin_lock$VARIANT$mp  (in libsystem_c.dylib) + 13  [0x7fff8630ff9d]
        +   ! : | 1 _dispatch_queue_push_list_slow2  (in libdispatch.dylib) + 33  [0x7fff88715e10]
        +   ! : |   1 _dispatch_wakeup  (in libdispatch.dylib) + 132  [0x7fff88715ecd]
        +   ! : |     1 _dispatch_queue_wakeup_global_slow  (in libdispatch.dylib) + 59  [0x7fff88716073]
        +   ! : |       1 pthread_workqueue_addthreads_np  (in libsystem_c.dylib) + 47  [0x7fff86324016]
        +   ! : |         1 __workq_kernreturn  (in libsystem_kernel.dylib) + 10  [0x7fff8b52f6d6]
        +   ! : 1 _dispatch_queue_drain  (in libdispatch.dylib) + 48  [0x7fff887163c4]
        +   ! 3 _dispatch_mgr_thread2  (in libdispatch.dylib) + 71  [0x7fff887180c4]
        +   ! : 3 _dispatch_source_drain_kevent  (in libdispatch.dylib) + 172  [0x7fff887186d2]
        +   ! :   3 _dispatch_source_merge_kevent  (in libdispatch.dylib) + 226  [0x7fff88718858]
        +   ! :     3 _dispatch_wakeup  (in libdispatch.dylib) + 132  [0x7fff88715ecd]
        +   ! :       3 _dispatch_queue_push_list_slow2  (in libdispatch.dylib) + 33  [0x7fff88715e10]
        +   ! :         3 _dispatch_wakeup  (in libdispatch.dylib) + 132  [0x7fff88715ecd]
        +   ! :           3 _dispatch_queue_wakeup_global_slow  (in libdispatch.dylib) + 59  [0x7fff88716073]
        +   ! :             3 pthread_workqueue_addthreads_np  (in libsystem_c.dylib) + 47  [0x7fff86324016]
        +   ! :               3 __workq_kernreturn  (in libsystem_kernel.dylib) + 10  [0x7fff8b52f6d6]
        +   ! 1 _dispatch_mgr_thread2  (in libdispatch.dylib) + 61  [0x7fff887180ba]
        +   !   1 _dispatch_cache_cleanup  (in libdispatch.dylib) + 30  [0x7fff88716695]
        +   !     1 szone_free  (in libsystem_c.dylib) + 473  [0x7fff8633c91d]
        +   !       1 _spin_lock$VARIANT$mp  (in libsystem_c.dylib) + 13  [0x7fff8630ff9d]
        +   2 _dispatch_mgr_invoke  (in libdispatch.dylib) + 858,885  [0x7fff88717dd1,0x7fff88717dec]

    It would help to know more about your iMac.
    What year, screen size, CPU speed and amount of RAM installed?
    How full is your Mac's hard drive?
    How many applications do you run simultaneously in the background while working in another application?
    Do you run any antivirus software on your Mac? Antivirus software can slow down the normal operation of OS X.
    Do you run any "crapware" like Mackeeper or any other type of so called hard drive "cleaning" apps?
    Have you downloaded and installed anything recently that might have caused the erratic behaviour of your iMac?

  • PRS-650 Demo mode

    Hi
    I have acquired a PRS-650 from a shop which has closed down, but its stuck in demo mode as it was on display.
    Anyone help with how I can get it out of this mode please?
    have tried the PRS-600 reset instructions but they don't fix it
    Regards
    Dawn

    Found a solution!
    A "kind" man was still in the shop clearing out stuff and he swapped it for another one that was not stuck in demo mode.

  • After installing 2014.3 my site had multiple issues with Google Chrome

    After installing 2014.3 my site had multiple issues with Google Chrome. After I rebuilt the home page in 2014.3 the site is still not well. With the old software the site worked well with all the browsers and loaded incredibly. Despite Adobe's claim of a faster load with the new software it is much slower and in Chrome at times it won't load up at all.
    The home page had two "Video-Animation light box galleries" by Visual pictures company. One had 12 videos, the other 3 videos. All the videos were streamed from Vimeo. There was also an Edge Animate animation in the middle of the page imported as a .oam file. the rest of the page was nothing special except using some web fonts. Again, these elements worked together well before the update.
    After the update everything loads slower in all browsers and in Chrome all types of weirdness happened. Videos would play randomly, all of the audio from all the videos played as the site loaded. Videos would play in the wrong place. Instead of my animation playing a video from the galleries played in it's place instead.
    I rebuilt most of the home page using a new video gallery and that helped some what but when I placed the animation.oam file in the page had new issues. To survive, I've taken the Animation out which helped but the functionality is still far from being acceptable. My boss is un my backside, other work is not getting done the stress level is through the roof because I was the one who encouraged using all these new Adobe tools (which I'm paying for personally). Now you broke it with a new update. This is not the first time I've been caught out with problems with updates. I couldn't use SpeedGrade for months following an update. ADOBE MUST VET THEIR       

    Sorry,
    It was slated to go to the Creative Cloud - Muse area. How it got to Photoshop is beyond me.
    Bob

  • Multiple issue in output type

    Hello,
    we have output ZROS configured. No custom enhancements. Sandard EDI output us attached to it. In the config of output type, we have "multiple issue" ticked.
    1) what is the meaning of multiple issuing. does it mean, that whenever someone goes into delivery in change mode and goes out of delivery, system will give a pop up that delivery has changed and if we press save, then the output will be trigerred ?
    2) We have seen whenver the shipment is created for the delivery, then the transportation planning status  of delivery is changes (as per standard sap ), then we see that there is another output ZROS trigerred from delivery ? Why is the output Trigerred when transportation planning status is changed for the delivery  ?
    regards
    Pamela

    1. Once you check the 'Mulitple Issuing' box then it allows you to use more than once the same output type for the same partner.
    2. Answer is on your question itself, i.e., you have checked the 'Multiple Issuing' Check box for your output type so whenever you do changes in delivery so automatically same corresponding output type will be triggered.
    If you don't want this to happen for every delivery changes then you shouldn't check the box.
    Please try above the step to stop multiple output trigger.
    Anandkumar KS

  • IDOC_OUTPUT_ORDRSP - Multiple Issue Output

    Hi All,
    I have problem issuing multiple output for a Sales order Confirmation. BA00 is configured as:
    1> I have assigned reqmnt 2 to the output BA00
    2> Multiple Issue flag is checked
    3> In Change Section, I have assigned FORM ZZ_ITEM_CHECK for program SAPMV45A. For now, I have code just as SY-SUBRC = 0. (Meaning for every SAVE of a order, trigger order conf output BA00)
    4> WE20 is created without change flag (AENDE) selected/checked.
    Steps:
    1> Order is initially created and IDOC output BA00 is successfully triggered.
    2> I go into the order second time, change something and hit SAVE. BA00 output is triggered but is with RED light. Error is
    EDI: Partner profile outbound process code not available
    Message no. E0 335
    Diagnosis
    An outbound partner profile could not be found with the following key:
    /0003003919/KU/AG/V1/ZBA0/X/
    I understand the program is trying to find WE20 with AENDE flag as Checked (hence 0003003919/KU/AG/V1/ZBA0/X/  ... "X" is is the AENDE flag in WE20 in Mesg control section where we input the process code and mesg type. This flag is not checked in my WE20.But the program is hoping to find it as checked.
    If I "check/select" it in we20, initail order save conf o/p is not triggered as AENDE flag is not selected by the pgm and WE20 has it as checked. Either way it fails.
    Any ideas?
    Thanks
    Bhaven

    How many output type did you create ?
    If you create two output type.
    1) Outbound ORDRSP(BA00)-->Regular confirmation
    First one trigger always once sales order is complete.
    2) Outbound ORDRSP(ZBA0)->Normally they have this for change confirmation.
    Second one will trigger only when there is changes in sales order.
    I guess for first case you maintained in WE20(Partner profile).
    and for second case(ZBA0) you didn't maintain partner profile. If you are not maintain, you have to maintain in WE20.
    "Reward point if usefull".
    Thanks,
    Narayan

  • HELP - Multiple issues showing up.

    I am just installed OSX Mavericks.
    My dreamweaver is not showing Form Objects under the Accessibility menu.  So I decided to try to re-download dreamweaver.  But my Adobe Application Manager will not open.  And it won't download to reinstall.
    HELP.
    MD

    We are experiencing multiple issues as well. We have a district that we have updated to Mavericks. The Creative Cloud programs DreamWeaver, Flash, Afer Effects all giving issues upon the update.
    When trying to update using the Creative Cloud Desktop app, nothing updates, Always failing. Also, when trying to update via the Apps themselves, it will not allow us to update. Local Admin on the machine logged on, Signed into the Creative Cloud with the Enterprise logon, Updates Greyed out.
    DreamWeaver issues:  Continually crashing and freezing during proces of renaming, organizing and linking files.
    After Effects:  Will not launch after the new Mac OS update. Showing version 12.0.  Not compatible with OS X 10.9.  Update does not show up in the Creative Cloud Desktop App. Only update shows up on a freaking blog page:  http://blogs.adobe.com/aftereffects/2013/10/after-effects-cc-12-0-1-update-fixes-crash-on- mac-os-x-v10-9-mavericks.html
    Flash Pro: Flash will allow to save into only certain drives, but will not allow user to open that file and acts as if it cannot read it.  Files can only be re-opened if they are saved to the local desktop/local drive. Not a network drive. 
    The testing between Adobe and Apple was no short of poor with these updates and OS update as well.

  • Digital Editions 3.0 transfer Sony EReader PRS-650 to new computer

    Windows 8.1 x64 is not recognising my Sony PRS-650 in Digital Editions 3.0.  The Adobe ID is the name on both computers and is authorised in the Digital Editions menu.  When connecting to the new machine Digital Editions does not display the device in the left hand pane when it is connected.  Version on old machine is Digital Editions 2.0.
    Just resolved this by installing the Sony EReader application, probably installed some drivers as well as the app.

    Windows 8.1 x64 is not recognising my Sony PRS-650 in Digital Editions 3.0.  The Adobe ID is the name on both computers and is authorised in the Digital Editions menu.  When connecting to the new machine Digital Editions does not display the device in the left hand pane when it is connected.  Version on old machine is Digital Editions 2.0.
    Just resolved this by installing the Sony EReader application, probably installed some drivers as well as the app.

  • ISE - Multiple Issuing Subordinate CAs for EAP Auth?

    Is it possible to utilise multiple issuing subordinate CAs with an ISE implementation? In short I have a situation where the client is wanting to issue certificates for one group of users from CA1 and issue certificates for another group of users from CA2.
    As far as I can see it is not possible to have two different server certificates installed on a policy node for the purposes of EAP authentication. Is the only way around this to install a policy node per issuing certifcate server?

    Ok to add to this I would really like some clarification on certificate installation for the purposes of EAP-TLS. The Cisco doco is at best vague on this topic. I have a distributed deployment with 2 x Admin, 1 x monitoring and 2 x PSN. I have installed a Public HTTPS server auth cert on each device and all nodes are joined. I would now like to utilise MS CA cert infrastructure to authenticate EAP-TLS.
    My understanding is that I need the MS CA Root Cert and Subordinate Cert on the Admin node with the subordinate cert ticked for trust for EAP Auth. Is there a requirement for a Server Authentication certificate on the Admin Node? Going forward with that Is there a requirement to add a server authentication certificate to the PSN Nodes?
    In addition back to my first question is it possible to utilise multiple subordinate CAs for client authentication if so how as I cannot seem to click trust for EAP on multiple certs

  • Multiple issuing in output type?

    I want to control printing times of a output type.
    can I apply the function of "Multiple issuing" in a output type to "Transm. Medium" = 1?
    who can give me a way?

    In the config, there is an option to "Multiple issue", i am not sure if you are referring to this. If this option is checked then the system will propose this output everytime the document is opened in Change mode.
    Now to answer your query reg, processing the output in a specific time you may choose the Dispatch time as "Send periodically with scheduled Job" or "Send with own transaction".Once you do this the o/p will be proposed but will be in Yellow status and you can run a job to process these outputs. I think you can run the program RSNAST00 in the b/g at specific times to process these o/ps.
    Hope this helps.
    Regards,
    Mani

  • ORDRSP Multiple issuing

    Hi,
    I´m sending ORDRSP as confirmation(rejection/acceptance) from an SalesOrder by using the Multiple issuing from Output Types.
    I included a Form_Function in the SAPMV45A who creates a new ORDRSP(Multiple issuing)Idoc if the reason code(itemline) in the salesorder will be changed.
    That works fine... but i get allways all itemlines in the IDoc not only the changed one.
    Can i control this by using the SAP standard or can i change this otherwise ?
    Thank you,
    Gordon

    Ehnacement : SDEDI001
    Component : EXIT_SAPLVEDC_004
    You will have in tables
            DXVBAP
         DXVBEP
            DXVBKD
    compare the current values at item level (VBAP) and delete unwanted items from DXVBAP and DXVBEP .
    Raise exception if none of the items are changed (if you want , it might end up with RED output type).
    Let me know if it helps you.
    Mano Sri

  • PRS-650 Sync problems

    I have just purchased a PRS-650 and transferred about 100 books to it from the library on my computer. When I try to sync with the library, it appears to hang.
    Is there a maximum number of books that can be synced at any one time?
    Thanks

    Hi.
    Before all, I want to say that I already searched in all
    Sony websites to solve my problem, but I didn't
    find any answer.
    So it's why I'm asking here.
    I'm trying to sync books to my PRS-650.
    All the books I want to sync are loaded
    in my library.
    Now I want to sync them on my PRS-650 as usual
    when I connect my Reader to the computer.
    But now, in the schedule board, the loading is
    stucked at the option that I could translate (I'm french-canadian) as "Flash Sync progressing" since one day.
    I tried to cancel and sync again, same result.
    I disconnected my Reader, putted it off, and reconnected my reader to the computer, same result.
    I cancelled the sync, and synchronised it again, same result.
    Ii is impossible to sync my books to my Reader.
    My computer is running good on Window Vista, with a dual-core Toshiba Satellite computer.
    And I have the latest version of the Sony Reader software, I checked it twice.

Maybe you are looking for