Ps3 : hdmi to vga on dell lcd monitor

i recently bought a ps3 and the only place i can play it in is my dell monitor in my room. i bought a hdmi to vga cable and it didnt work and i tried holding the power button until 2 beeps. do i need a converter, new monitor or a new cable ? my monitor is dell e176fpf monitor.

The first reply was accurate.  HDMI (and DVI) are digital and VGA is analog.
There are many cords on Amazon and Ebay that claim they will work (its a scam, and a brilliant one at that).
you would need an active converter (if you want audio)
http://www.ebay.co.uk/itm/1080P-PC-HDMI-to-VGA-3-5​mm-Audio-HD-Video-Converter-HDTV-SKY-DVD-PS3-Apple​...
If you were able to convinve yourself/parents to spend a wee bit more money you'd be much happier with this.
http://www.bestbuy.com/site/Sony+-+PlayStation+3D+​Display+Bundle/2891051.p?id=1218360683860&skuId=28​...
That is also assuming your local store has them in stock.... 
:-P
Good luck

Similar Messages

  • Cleaning Dell LCD Monitor - What are current recommendations?

    What are the current recommendations for cleaning a Dell LCD Monitor?
    I have always used 50% distilled water and 50% isopropyl alcohol and gently cleaned with a microfibre cloth.
    We have many different Dell LCD monitors in my workplace.
    George

    How do I clean my monitor screen?

  • Dell LCD monitors?

    Has anyone had any luck with the Dell line of LCD monitors. I need to purchase two for a professional graphic design setup.
    Thanks,
    Kelly

    sfaulk wrote:
    I have been using the new Dell 24" for two weeks so I'm pretty sure it's on sale
    The new Dell 2408wfp is a beautiful monitor with the exception of an over saturation of the red colors. I calibrated it today with a eye-one display2 and it is much better but the reds are still a little more neon bright then I would like. I hope Dell does a firmware revision that will correct it.
    "On sale" as to less than $699.
    Firmware upgrade is not user installable. You'll need to get a new monitor.

  • IMac 400 VGA Out to LCD Monitor works but CRT Display is Black

    Hello.
    Our church has an iMac 400 with the VGA out port in the back. We connect the iMac an LCD projector to display PowerPoint presentations.
    Intermittently, the iMac's CRT display works, then the next time it may not work. Some Sunday mornings it won't work at all, though the desktop can be seen on the screen overhead because the Mac is sending the signals to the LCD projector, which worksf ine. If I disconnect the VGA cable and boot the iMac, then the display works perfectly. Everytime.
    I've changed the VGA cable twice, thinking it was bad, but there is no consistent rhyme or reason why this occurs. Some Sundays, both the CRT and the LCD projector work as they should. Other times, only the projector works.
    The VGA port always works because the LCD projector always displays the desktop. But the screen on the iMac itself is used as a viewing monitor of sorts for the speaker, and we need it to work properly (the speaker faces the iMac, while the screen for the LCD projector is over his head and behind him).
    Any input would be appreciated.
    Thanks,
    RW Harris, Pastor
    Crossview Community Church
    CrossviewChurch.com
    iMac DV 400   Mac OS X (10.4)   1 gig RAM

    It sounds like you may already have the answer in your post... Dual Link versus "not compatible"
    The only other thing I can suggest is to connect them up, then go to System Prefs --> Displays --> Detect Displays
    That works for me when it doesn't connect immediately - but then again most of the time my display notices the input immediately

  • Connect Sun Ultra2 to a Dell 19" LCD Monitor

    Hi
    Can you connect Sun Ultra2 to a Dell LCD Monitor 19" using a Sun Graphics adaptor HD15F
    Thanks,
    -Will

    The answer is probably "No".
    An Ultra-2 only has SBUS and UPA slots (no PCI slots), and few of the qualified graphics boards had HD15 connectors. There was no integrated graphics. All system administration could be done via command-line through its serial port.
    The default screen output of a Sun system is 1152x900 at a vertical refresh rate of 66Hz. The best you are likely to see on that PeeCee flat panel screen is a scrambled "something" that may eventually make your eyes hurt.
    When you say "Sun Graphics adaptor HD15F" are you are simply stating there seems to be a familiar graphics shape on the system or are you asking about some sort of adapter cable? That doesn't tell us the actual card that is in the system.
    Keep in mind that you are asking about hardware that is probably 15 years old.
    It may have been cutting edge back then, but it has been very much passed since that time.
    For a more precise answer, you will need to open the computer, remove the graphics board, and copy the part number from its barcode paper sticker. We would need the first seven digit (something such as 501-4790xxxx ).
    You could have posted this hardware question to the [Hardware Forum|http://forums.sun.com/forum.jspa?forumID=828] you know, or even just search that forum for whatever you might need. This topic has been discussed over there many times in the past five or six years.

  • 24 pin DVI-D to Mini VGA adapter for external monitor

    So I am about to buy a 20" Dell lcd monitor and I found out I need an adapter to the ibooks mini DVI port, can anyone direct me towards a 24 pin DVI-D to mini VGA so I can connect this monitor to my 12" ibook?
    Thank You
    Jeff

    The iBook does not have a mini-DVD port. The iBook has a mini-VGA port.
    The mini-VGA to VGA adapter is the Apple VGA Display Adapter M8639G/A.

  • Using apple TV with an LCD monitor

    I've hooked up an Apple TV to a Dell LCD monitor that has an aspect ratio of 16:10 using an HDMI to DVI connector.
    It seems to me that there is no really solid reason for the Apple TV to not allow support for 16:10 aspect ratio. Watching an espisode of Lost on the LCD is particularly bad, since it is pillarboxed to begin with, and the 16:9 signal that is sent then is further horizontally squished instead of using the available space.
    It would be nice to have this display show the signal letterboxed, but there is nothing you can do with a digital display with a digital signal, you are locked out from any manipulation via the control panel on the monitor and everything is left for the source to decide. If the source doesn't support much configuration (in the case of the Apple TV any configuration), then you're locked into watching an inferior image.
    Is there any way that I am missing to get proper aspect ratio displayed when plugged into a 16:10 aspect ratio monitor?

    Apple TV isn't a monitor. Nor is it a deck. It is another computer. So no, you cannot route a signal thru it.
    You are living in cloud cookoo land.
    Shane

  • MBP 17"  + 2 Dell 24" Monitors = ?

    Currently I have my 17" MPB connected to my 24" Dell LCD monitor using a miniDvi to VGA adaptor. This setup works fine. Is there anyway I can connect a 2nd Dell 24" monitor to my setup? Even if it means sacrificing my actual MBP screen.
    I know, I am greedy

    The Matrox DualHead2Go is one of the better solutions out there. Your sig says your MBP has Mini DVI, something the MBP never came with. I assume you mean Mini DisplayPort. Anyway, you'll have to chose your compatible model here:
    http://www.matrox.com/graphics/en/products/gxm/mac/choice/

  • Can switching from CRT to LCD monitors cause system problems?

    My 9.1 locks up periodically (but the cursor still moves) since I replaced two 20" CRT monitors with two Samsung 19" LCD monitors. Could this affect the performance of my machine? I've tried everything else to address the freeze problem but recall the issue started when I installed the LCD monitors. Anything I can do?

    Studedot,
    You may have issues with the amount of video memory depending on the resolutions of the new LCD screens.
    I find LCD screens go up to insane resolutions, way more than the corresponding size CRT monitor, ie. a 17in Dell LCD monitor with higher resolution than a 21in CRT.
    It shouldn't cause crashes or freezes, but may cause -redraw problems when closing / moving windows in 2D and playing 3D games.

  • I cannot get my monitor cable to fit in the hdmi to vga adapter

    Hello
    I was wondering if anyone is having the same issue as me.  I'm trying to plug my new mac mini into my Dell flat screen monitor.  It doesn't seem to fit my HDMI to VGA cable so I'm assuming that my cable is in fact a DVI?  The cable is actually a little too big for the VGA adapter and no spots for the screws.  If anyone could help me further I'd really appreciate it.

    Hello, what does the connector on the Monitor & Cable look like?
    VGA & DVI...

  • DVI.I to VGA LCD monitor

    Hi Everyone
    Is there anything to gain by using the DVI connection on my MSI FX5900XT graphics card
    to the VGA port on a  DELL 19" LCD Monitor ?
    I was just wondering as the card came with an adaptor DVI/VGA so I can use either output on the card.
    At the moment I am connected VGA to VGA
    cheers
    riggie

    Apple didn't ship a 2.4GHz MacBook until February of 2008. If that's the model you have, or an earlier model, it has a mini-DVI port which would take the mini-DVI to VGA adapter. To confirm, run System Profiler, click on the Hardware heading at the very top of the left-side list, and tell us what the Model Identifier reports.
    Regards.

  • Dell 24" LCD monitor shows barely perceptible lag

    I have a Power Mac G5 and just bought a Dell 24" LCD monitor, the 2405FPW, for $825. After happily clearing off my desk of two old CRT's and connecting it up and using it for a couple days, I began to notice a lag between anything I did and when it would appear on the screen. The lag is barely noticeable, but I tend to mouse around very quickly and need precise control of the pointer, and after hours of use, the slight discrepancy seems to be causing me fatigue. It's also a problem when playing Quake (fast-action first-person shooter game). The lag doesn't exist with my old Sony 19" CRT.
    Before jumping to any conclusions that I'm insane, please look at this short video clip that clearly demonstrates the same problem. It's quite amazing to see. The video is linked from this page:
    <http://weblogs.asp.net/ryanw/archive/2004/09/23/233681.aspx>
    (You may have to save it to your desktop and then double-click it to see it.)
    The guy hooked both an LCD and a CRT monitor to his machine and spanned a window across the boundary between the two. Then he videotaped what happens if you move the window up and down. You can see clearly that the LCD screen takes longer before it draws its half of the window. Ouch!! He compares using his LCD monitor to "swimming in molasses" (which later spawns an interesting discussion involving a hazmat worker and an overturned tanker of molasses), but I wouldn't go that far.
    I ran the same experiment in the video and got the same results (and so did my dad, with his Powerbook Pismo, which is interesting because he never noticed the lag through normal, daily use of the computer). Then I took my Sony CRT to the Apple store and hooked it up next to a 23" Apple Cinema Display. I did the same experiment and there was no lag!! So unless someone has a solution for the Dell monitor, the $500 price difference might be the price I'll have to pay for Mac compatibility. I might wait as long as I can for the price to go down (the salesperson said the last price reduction was last November).
    Very few people seem to experience this problem in general (or don't notice it), so I have no idea why it's affecting my system. It's basically a stock dual 2GHz G5, running Mac OS X 10.4.4, with 2.5GB RAM and stock graphics card which should more than handle this (ATI Radeon 9600 Pro, 64MB, AGP 8x). I'm using the digital monitor connection, as opposed to VGA. I'm running very few preference panes and kernel extensions. Dell tech support would have nothing to do with the issue because they don't support Macs, but after some finagling, I finally got the monitor returned with a full refund. My suspicion is that some sort of driver somewhere needs to be updated, but with no support from Dell (their web site doesn't even seem to have a support section for their own monitors), I'm not sure who to expect this from or when.
    This problem is subtle and many find it unnoticeable, if they're even experiencing it. So I would like to know if anyone else has a Dell LCD and a regular CRT monitor both hooked up to their system and could try the experiment in the video to confirm "scientifically" that they don't experience this problem!
    Scott
    www.teresi.us
    Power Mac G5   Mac OS X (10.4.4)   Basically a stock system. Dual 2GHz, 2.5GB RAM, ATI Radeon 9600 Pro (64MB)

    My post has started a more extensive discussion on this problem at an Ars Technica forum:
    <http://episteme.arstechnica.com/groupee/forums?a=tpc&s=50009562&f=67909965&m=41 90936913&r=796009877731#796009877731>
    It appears that the problem may be inherent in all PVA-based LCD's, which include the Dell 2405FPW. It's not noticeable by everyone but so far everyone I've seen who's taken the time to run an objective test has uncovered the lag. If you can run the test, please do! (See earlier in this thread, or see the Ars Technica thread for a better test involving a stopwatch program run on two monitors).
    The good news is Apple's 23" Cinema Display is based on a SIPS LCD panel (as is a similar HP display, and I think a Sony display), and these don't suffer from the lag.
    Scott

  • Mac Mini I-7 2.0 (server edition) won't work with Dell 2709W monitor via HDMI

    I just got a Mac Mini I7 quad 2.0.  It's the server edition with an HDMI port.  I plug my Dell 2709W monitor in and it continously flickers on and off and shows a green screen and the desktop for short intervals.  Can anyone help with this issue.

    Does the monitor work OK when connected to another HDMI output device?
    Does the Mini HDMI output work OK when connected to another HDMI device?
    You have selected the HDMI input on the monitor, right?

  • Monitor Keep Flashing after connecting External Monitor with HDMI to VGA Adapter

    Dear Support,
    Here the case that i have connecting an External Monitor by HDMI to VGA Adapter.Once it connected, the monitor (Macbook) with keep flashing and no signal on the external monitor. Please help.

    Hi there BrianYip,
    You may find the troubleshooting steps in the article below helpful.
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    -Griff W. 

  • Which LCD monitor to get? Dell or Apple?

    Hello everyone!
    Well, I have decided to make the jump from CRT to LCD. I see that Dell has one similar to the Apple Cinema Display which is 20 inches. I am somewhat confused as to what monitor I should get since to me the Dell looks just as good as the Apple?
    Can someone recommend for me a nice 20 inch LCD monitor similar or comparable to the Apple Cinema Display 20 inch?
    Thanks,

    Hi Nadav,
    MacWorld reviews:
    http://www.macworld.com/products/displays.html
    You decide what is important to you in each review. ie. some displays have a "poor" viewing angle, but if that's not important, or privacy is important, then you can ignore it.
    Or the UK MacUser labs tests:
    http://www.macuser.co.uk/labs/23:9/19in-widescreen-tfts/products.html
    Again, filter what is important to you.
    Something that was important to me was pitch size, I'm used to 96dpi now (but 72dpi when I had CRT). 12pt fonts look the same size on every monitor I work on. When I have used a Dell "19in" TFT, it was smaller than my 17in Studio Display. It also had some insane native resolution, which made 12pt fonts tiny and unreadable - annoying if you're proofing PDF documents. When I reduced resolution, it looked awful, and was still unreadable.
    Oh yes, TFTs can be awful below their native resolution, while CRTs usually manage quite well. There is a technical reason for this - can't find the link just now - something to do with the phosphor in CRTs, maybe.
    Still, this might not be important to you, or TFT monitors with insane native resolutions may be a lot better now. Just something to check, 96dpi is good.

Maybe you are looking for