PS4 Blinking white,and Blue light Causes, Fixes, and occurrences I need help
I have a question about the three blinking lights what causes the blue light and if it happens once will it be more likely to happen again and with the white light if it happens once will it happen again more frequently and what are the fixes and causes I know some of the causes for the white light like if many downloads are happening in the back ground don't turn of the PS4 that is something that causes it so what should I do and what are the causes and if it happens once will it be more likely to happen again
You've lost me, take a deep breath and start again.
Similar Messages
-
The light on my apple tv is blinking white constantly what is causing that?
My Apple TV light on the front of Apple TV is constatly blinking white. What is causing that? It just started doing that today (1/22/2013).
HELPIf your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Source list, and then click Restore.
If when you choose restore you get a message that the device cannot be found, download the file below
Apple TV Software Restore 5.1.1 (2nd generation)
Apple TV Software Restore 5.1.1 (3rd generation)
Then hold down the option key while choosing restore and select the downloaded file when prompted. -
Hi, I have an iMac which I just booted up and have a white screen with a blue folder with a question mark blinking on and off. Any help would be appreciated. Tommy
That means your iMac could not find a system to use for startup. That may mean the internal hard drive has become faulty, or the hard drive mechanism is fine, but the startup volume ("Macintosh HD" unless you renamed it) may have some type of data corruption that makes it unbootable.
First, you should try resetting PRAM
http://support.apple.com/kb/HT1379
and if that does not help, use this procedure to reset SMC (power management). If your iMac is from 2008, this is the procedure for Intel (not PowerPC) Macs.
http://support.apple.com/kb/HT3964
(This forum category is for "iMac (PPC)," so if this iMac is older (with a PowerPC processor), please post back.)
Disconnect all peripheral devices. When you connect it back to power, if you have been using a power strip of some type, try connecting it directly to a wall outlet, by itself (at least initially). Start up with nothing but the power cord connected, then add only standard mouse and keyboard. If it works, run it that way for a while.
If PRAM and SMC reset have no effect, you should insert your Mac OS X installation disc (for the currently installed system) in the optical drive, and restart with the C key held down. This should get you to the Installer screen, where you can run Disk Utility from the Utilities menu.
In Disk Utility, does the internal hard drive appear in the sidebar? If so, select Macintosh HD in the sidebar and go to the First Aid tab. Use Repair Disk. If an error is found, note if Disk Utility was able to fix it or not.
You can then quit Disk Utility and attempt to restart normally. -
When i get an SMS txt my led light doesnt turn red no more need help!
when i get an SMS txt my led light doesnt turn red no more need help!
1. Product name:
BT Home Hub
2. Serial number:
+068343+NQ34940784
3. Firmware version:
Software version 4.7.5.1.83.8.204 (Type A) Last updated 22/01/15
4. Board version:
BT Hub 5A
5. DSL uptime:
0 days, 00:58:41
6. Data rate:
9995 / 39993
7. Maximum data rate:
11929 / 48683
8. Noise margin:
6.6 / 9.5
9. Line attenuation:
25.6 / 20.4
10. Signal attenuation:
25.4 / 20.0
11. Data sent/received:
8.6 MB / 61.5 MB
12. Broadband username:
[email protected]
13. BT Wi-fi:
Yes -
i have printers at home and work. i need help programing my macbook print utility so computer knows which printer to use depending on where i am. thanks
Look for cloud solutions such as DropBox, OneDrive, SugarSync or others. They are all cloud based services that sync documents between computers via the cloud. Of course another solution is simply a flash drive formatted in exFat so that Macs and Windows computers can read it.
-
Watching Movies: iPod to TV- black and white and split screen. Help?
I have this cable: http://www.radioshack.com/product/index.jsp?productId=2994604
As you can see, the chord colors on that cable are red, green, and white. The places where the chords go in on my DVD player are yellow, red, and white. As you can tell, they don't go up. I connected them so the audio works fine, but the movie shows up ONLY in black and white, and the screen is split right down the middle. On my iPod, the 'Video Setting' do not fix this. I also have the iPod Classic 80 GB, for reference.
Help?Toggle between PAL and NTSC on video setting.
-
Whenever I try to play gaia, the page turns white and reloads.. Help?
Okay, here's what happens.
- I go to the Gaia Homepage
- I log in.
- IT takes me to the My Gaia Page and it's fine for 2 seconds.
- The page turns white and it reloads forever, and never shows the gaia page again.
... I don't know what's going on, and this has been happening for a while now... help??!
== URL of affected sites ==
http://www.gaiaonline.comoh, and at the bottom left hand corner it says "waiting on www.google-analytics.com...."
-
Hi there,
I have bought yearly subscription for Tech suite which expires in May 2015, however I am unable to download or install/activate it. I am paying monthly however cant use it!
need help- Is there an email or phone number I can reach ---
Thanks
-VanitaBobLevine wrote:
[....] If you find something out, please do come back and update us.
Thanks for your willingness to help, but I got some great news!!!
I finally managed to find the cause for that deactivation problem. It's called the "Update Root Certificates" component, which somehow was unchecked on my machine. Although I had previously installed the Adobe HTTPS (SSL) certificate for secure connections between my computer and Adobe servers, used while signing in on my account, each time I had to click YES to confirm manually that this certificate was valid and safe.
Now, while deactivating from an application, such confirmation is not displayed and therefore the application considers a certificate (and thus connection as well) as invalid or unsafe. The result is: "Internet Not Found... Unable to Connect..." message.
Here's what I did to fix it:
1. clicked Start, and then pointed to Settings and then clicked Control Panel
2. double-clicked Add or Remove Programs
3. clicked Add/Remove Windows Components (on the left)
4. scrolled down the list of components to Update Root Certificates, and checked the check box for that component
5. clicked Next, and followed the instructions to complete the Windows Components Wizard.
After turning that on, the deactivation was almost like a blink of an eye.
So if anyone has a similar problem, make sure you have that system component turned on.
Matt -
Wish I didn't upgrade! and now I need help to figure out how to make it wor
I have a Windows XP Pro 2nd edition with IE ver 6.0.2 (but I normally use FireFox)
I've never had any trouble with iTunes until iTunes "forced" me to upgrade my iTunes applicaiton to version 6 if I wanted to "purchase" music. (note to self: Purchase music from stores it's much safer)...
I upgraded and received no error messages. Trouble is now, when I launch the iTunes application it doesn't "open" ... although the iTunes process begins to run in the background process (ctraltdelete).
I have uninstalled and installed 5 different times and ways.
First uninstall was "typical" uninstall. THat didn't fix it.
Second uninstall was "typical" unistall from the Control Panel, and then I removed the folders from the "program File" folder. Still wouldn't work.
Third unintall was "typical" then I removed folders from local drive and removed all "known" registry "itune" keys. That didn't work.
Fourth uninstall was first a "repair" to itunes, and then a "typical" uninstall, then I removed folders, removed registry (does anyone know all of itunes registry keys? Maybe I am missing a few.. the only ones I know of is the "itune" reg). Then I looked through my start up menu from "msconfig" and took a look at my firewall program to see if there was anything preventing the program from running...
Fifth uninstall pretty much fruitless as my previous attempts.
I know it HAS to be a registry key of some sort.. here's why:
When I uninstall and reinstall (no matter how thourough) every time I install the iTunes program Windows XP has never ONCE recognized the new install of iTunes as a "NEW PROGRAM" and it should!
I need help... what registry keys should I be removing? ANyone suggest for me to remove Quick Time too? What about the ipod updater software? Any connection?
HELP??????????????????
THanks
W.hi wmchisholm!
Trouble is now, when I launch the iTunes application it doesn't "open" ... although the iTunes process begins to run in the background process (ctraltdelete).
hmmm. is itunes.exe persisting in Task Manager? if so, first check up on these two possibilities:
iTunes 6 won't open on a Windows computer if firewall software is not up-to-date
iTunes for Windows doesn't open after upgrading
but if itunes.exe is disappearing after a few seconds, try the following technique:
Using MSCONFIG to troubleshoot conflicts in Windows
... and let us know the names (exact spelling please) of the start-up items that you had to disable in order to get itunes to launch. (there's a nasty piece of malware out there that has been causing "error-less" itunes launch failures since late October.)
love, b -
I have EMS 3.5 installed and functioning. Need help with where to go next!
Hello All,
I am brand new to this and need a very basic push in the right direction.
I have FMS 3.5 installed on my server and I am ready to begin testing with it.
My website has a page with descriptions of videos and links to those videos.
When a link is selected, I want a new page to open and the video to play in the FMS player.
I have absolutely no idea how to go about this. I need some meaty information here. I read tom Green's tutorials, and although I found that they were informative, they are also quite general.
I have Flash Professional CS4 and I just need to know what the heck to do next.
Any and all help will be supremely appreciated.
Sincerely,
wordmanGentlemen,
Thank you for the answers, I will definitely look into what you both suggested.
My next step is getting a player into a separate page that plays selected videos through RTMP.
The player that comes with FMS would be fine, but I do not know how to alter it, change colors, etc.
Then I was looking into Real Eyes' REOPS player, and the white papers alone stopped me in my tracks. I realize it's probably easy, but now ehrn you are a novice, to understand it.
Then I saw Adobe Strobe, the OSMF-based player and thought that might be good for me.
The biggest problem I see is that Adobe's resources are not always easy to find on this website, same goes fo rthe OSMF site. Not very well structured sites for a software company.
Bottom line is, I need to get a player on a page that plays though RTMP. Any thoughts there? I'm completely new to Flash.
Thank you all!!!
Sincerely,
wordman -
I recently sold my iphone 4s back to att and they whiped it clean and now i have a galaxy s5 and my brother still has the iphone but when he sends me texts they dont always go through and i need help on what to do next
See if this helps:
iMesssage to old phone
If you move to another phone and forget to turn off iMessage then read “if you no longer have the device inhttp://support.apple.com/kb/HT5661 If you still cannot resolve it call Apple http://support.apple.com/kb/HE57
To deactivate iMessage http://support.apple.com/kb/ts5185
Read http://m.samsung.com/us/support/SupportOwnersFAQPopup.do?faq_id=FAQ00053450&fm_s eq=62995 -
I have a Imac and i cant acces adminastrator Becuase my two users dont have becuase i took them i dident know that would happen and need help i dont wanna loose all the stuff in the imac so if you can help please message me asp
Use the directions given here:
http://osxdaily.com/2011/08/24/reset-mac-os-x-10-7-lion-password/ -
Dynamic Forms and Flowing subforms -- Need help/Advice
Hello All -
I am creating a form for instructors at our college to complete. It has 3 pages, some static text, some required drop-down boxes, and three "comment" type areas which I would like to create so that they "flow" and display the entire contents when printed.
I've read everything I could find so far, but I think I am missing something quite basic.
I've created master pages, with a content subform on each one. I've placed all my content into subforms under that main content subform, named and ordered them the way they need to be. Most of it should appear as positioned. Only where there is one of the comment sections do I want/need the "flow content" option.
I tried following the directions I found in another thread. If I set the subform with the comment area to flow, then I never get the page break option (and it is needed) - it's always grayed out. When I try to set the underlying subform on the page to 'flow content', ALL of the content from all three pages ends up on one page, everything on top of each other.
What am I doing wrong?
Can anyone give me some tips as to where at least to start looking for what I've not done or done wrong?
Thanks in advance for any information -- it will be soooo appreciated!
LaurenHi Lauren,
You only need one Master page, and there's no need to put anything on it unless you want a header/footer that repeats on each page.
If you want to have things flow from page to page, create one body page object, and set its content type to Flowed (the body page is itself a subform). In it you put subforms with text, fields, and so on in them. Since your form will spill from page to page based on how much text the instructors type into the expandable comments fields, break up the forms content into sections (subforms) such that the layout can break between the subforms without taking away from the readability. These subforms should have a content type of Position. Even though there's only one body page object in your design, since you have three pages worth of stuff, it will spill onto three pages.
Now for the comments fields, which you want to wrap and expand. Make sure that each of your comments fields is in its own subform. Set the field to allow multiple lines and, in the layout tab, click the box to Expand to Fit (height). For the subform that contains the comments field, set the height to auto-fit (layout tab). Also for the subforms that contain comments fields, experiment with the "Allow Page Breaks Within Content" checkbox on the Subform tab. If you expect an instructor to blab on for more than an entire page of text, you will have to select this box, but otherwise I suggest leaving it unselected so that the entire comment remains together.
Jared Langdon
www.jlangdon.ca -
No ACL deny logs for Traffic not matched by Static Object NATs and ACL. Need Help.
I start noticing that I do not see any denied traffic coming in on my ACL. To better explain, lets say I have this config.
### Sample Config ###
object network webserver
host 192.168.1.50
nat (dmz, outside) static X.X.X.X service tcp www www
access-list inbound extended permit ip any4 object webserver eq www
If I generate a traffic from the outside let's say a traffic that is trying to access X.X.X.X via TCP Port 8080 which obviously does not have any NAT entry to it going to my DMZ, I don't see the ACL denies it anymore but instead comes back with a Drop Reason: (nat-no-xlate-to-pat-pool) . On the packet trace I got this. (Below) it seems that does not even hit the ACL as there is no xlate found for it, at least to what the drop reason says.
Phase: 1
Type: CAPTURE
Subtype:
Result: ALLOW
Config:
Additional Information:
MAC Access list
Phase: 2
Type: ACCESS-LIST
Subtype:
Result: ALLOW
Config:
Implicit Rule
Additional Information:
MAC Access list
Phase: 3
Type: ROUTE-LOOKUP
Subtype: input
Result: ALLOW
Config:
Additional Information:
in 0.0.0.0 0.0.0.0 Outside
Result:
input-interface: Outside
input-status: up
input-line-status: up
output-interface: Outside
output-status: up
output-line-status: up
Action: drop
Drop-reason: (nat-no-xlate-to-pat-pool) Connection to PAT address without pre-existing xlate
Before, using a regular Static PAT on ASA Versions 8.2(5) below, I could get the deny logs (ASA-4-106023). Generally, I use these logs, and are quite important for us specially during auditing.
My question is how can I generate logs for these type of dropped traffic on the ASA 9.1 Version?
Any comments/suggestions are gladly appreciated :)
Regards,
JohnI believe, but am not 100% sure, that the reason you are not seeing the ACL drop but a no NAT matched is because of the changes from 8.2 to 8.3 in the order of how things are done. In 8.3 and later you need to secify the real IP address when allowing packets in, and this is because NAT happens before the ACL is matched. So since there is no match on the NAT the packet is dropped then and there, never reaching the stage where ACLs are checked.
As to seeing drops in the ACL log...You might want to try adding an ACL that matches the NATed IP...but I don't think you will have much success with that either. My guess is that there is no way around this...at least no way I know of.
Please remember to select a correct answer and rate helpful posts -
Few errror/doubts in Primary and Standby server - Need Help
Hi All,
I am having below doubts/errors. I need help to solve all the below questions.
I configured Dataguard successfully. Now the sync is upto date using the below parameters (using 11g):
at primary:
log_archive_dest_1=
log_archive_dest_2='SERVICE=standby.123 arch'
standby_file_management=auto
at sandby:
log_archive_dest_1=
standby_file_management=auto
Still i face below messages in the alertliog. Can anybody clearly explain me all the points.
Primary:
ORA-1652: unable to extend temp segment by 640 in tablespace NEWTEMP
I get this error when my archvie destination got filled up, later we released the enough space, the archived are generating. Still i see this message once in between. Need to solve this.
Primary:
Checkpoint not complete ( i see this message very often, want to get rid of this)
standby:
kcrrvslf: active RFS archival for log thread 1 sequence (sometimes i see this KCRRVSLF)
standby:
check that the CONTROL_FILE_RECORD_KEEP_TIME initialization parameter is defined to a value that is sufficiently large enough to maintain afequate log switch information to resolve archivelog gaps. (also get this message in between the alertlog file in standby)
Standby:
FAL[client]: Error fetching gap sequence, no FAL server specified (this is very often message. How to remove this, what needs to be added. Do i need to add the below parameters)
FAL_CLIENT
FAL_SERVER
Thanks in advance.
Pas Moh
[email protected]Pas Moh wrote:
Hi All,
I am having below doubts/errors. I need help to solve all the below questions.
I configured Dataguard successfully. Now the sync is upto date using the below parameters (using 11g):
at primary:
log_archive_dest_1=
log_archive_dest_2='SERVICE=standby.123 arch'
standby_file_management=auto
at sandby:
log_archive_dest_1=
standby_file_management=auto
Still i face below messages in the alertliog. Can anybody clearly explain me all the points.
Primary:
ORA-1652: unable to extend temp segment by 640 in tablespace NEWTEMP
I get this error when my archvie destination got filled up, later we released the enough space, the archived are generating. Still i see this message once in between. Need to solve this.This error has absolutely nothing to do with the handling of archive logs, the status of archivelog destination, or primary/standby. Any relation you thought you saw was pure coincidence.
>
>
Primary:
Checkpoint not complete ( i see this message very often, want to get rid of this)
Here is the very first hit I got when I googled "oracle checkpoint not complete". Tom says it better than I would have.
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:69012348056
standby:
kcrrvslf: active RFS archival for log thread 1 sequence (sometimes i see this KCRRVSLF)
A quick google of that one, and it looks like it is not even an error, but rather simply an informative
>
standby:
check that the CONTROL_FILE_RECORD_KEEP_TIME initialization parameter is defined to a value that is sufficiently large enough to maintain afequate log switch information to resolve archivelog gaps. (also get this message in between the alertlog file in standby)
In that case I would check that the CONTROL_FILE_RECORD_KEEP_TIME initialization parameter is defined to a value that is sufficiently large enough to maintain adequate log switch information to resolve archivelog gaps.
How big is that? Well, at least bigger than it is now. Beyond that, it would have to be "large enough to maintain adequate log switch information to resolve archivelog gaps" Just play with it until you get the result you want.
>
Standby:
FAL[client]: Error fetching gap sequence, no FAL server specified (this is very often message. How to remove this, what needs to be added. Do i need to add the below parameters)
FAL_CLIENT
FAL_SERVER
Thanks in advance.
Pas Moh
[email protected]
Maybe you are looking for
-
Restriction of Tcode SQ01 based on Company code
We are running one customized query using Tcode SQ01. We need to restrict Tcode SQ01 in company code level. We have checked about authorization object in st01. But there is no check of authorization object. Can anybody help to restrict SQ01 based o
-
PDF Files created by previous Acrobat versions
Has anyone had issues with previous scanned PDF files opening blank on a machine? The files were created with Adobe Acrobat 6. Opening them with Adobe Acrobat 8 and Adobe Reader 9, they show up blank. If I forward them to another computer, they ap
-
How to restore a schema from a corrupted DB
Hi, I need your help. I am using a laptop and a desktop, both with XP SP2. I have installed Oracle XE on both of them. They are in a LAN. I have been using them for almost a year now... But since few days ago I cannot use the DB from my desktop (ther
-
Consideration during Multiple ECC systems with One APO system for PP/DS
Hi All, We have a scneario that Multiple ECC systems and Third party ERP systems and Legacy systems .What are the points to be considered for this scenario when using with PP/DS?
-
in Forms Central, attempting to do file attachment, but "select File" option is grayed lout/unavailable - how do I make it available?