PSE 8 catalog in custom location not shown in catalog list

I am trying to help a client recover from a computer problem. She was having several types of problems with her PC a couple of months ago. PSE 8 seemed to be working ok at the time, and my memory tells me I Reconnected all missing files (if there were any), Repaired and Optimized, as is my usual practice. I then did a full backup to an external drive. She then had her son fix her computer in some way shape or form. He lives out of state. I got a call and she said she was ready for me to get her PSE 8 back up and running.
When I got there, we discovered she did not have the PSE 8 CDs. She he bought it online from Adobe but never copied it to a CD etc. We decided she would buy PSE 10 and download it. I had never downloaded any from the Adobe Store and was totally shocked to discover it was a three hour download. Other equally large files I have downloaded from Adobe would have taken 20-30 min. While it was downloading I even went hoe and started the download on my internet connection. It would have taken an equal amount of time. Sorry, I strayed.
After we installed PSE 10, I did a Restore from the PSE 8 backup I made a couple of months ago. I have done this many times over the years with very good results. We got a message saying the catalog was successfully restored. But when I went to convert it to PSE 10, an error appeared saying the conversion failed and we shoulf try restoring it on to PSE 8 and try abother Backup.
That's the background. I do still have PSE 8 on a PC at home. I restored the Catalog to a custonm location (a second internal drive). All of the 5300 pictures or visible, tags appear to be in order etc.
But before trying a Back-up I wanted to Repair and Opimize the Catalog (named my Catalog). But with the catalog visible, the area where I expected to see [Current] is blank, and the Repair etc buttons are grayed out. I'm stumped. The only think I can think to do is to back another backup and try to restore that one on her PSE 10 after I dry run it at home.
I'f attached a screen shot showing the dialog box in quesation. I now see where it is quite small, you should be able to see the areas of the screen I'm referring to.
I'm stumped. Any suggestions will be very much appreciated.
TIA

Brett,
Thanks for the quick reply. It seemed like a simple solution, but it did not work. Going up one level did not change anything. The area is still blank and the choices are still grayed out.
Can you think of anything else?

Similar Messages

Location not shown on photos on ipad 4

location not shown on photos on ipad

What model of iPad is it, wifi-only or wifi-plus-cellular, and have you got Settings > Privacy > Location Services > Camera set 'on' ? Only cellular models have a built-in GPS chip, for a wifi-only iPad to potentially be able to record location details on a photo it needs to be connected to a wifi-network, and that network needs to be in Apple's database

Thanks Neil. Though I have purchased Mountain Lion from Mac App stores before HD crash, this is not shown in the list of purchases.why?

Thanks Neil. Though I have purchased Mountain Lion from Mac App stores before HD crash, this is not shown in the list of purchases.why?
regards,
[email protected]

If you go to System Preferences > Network do you see other networks listed on the left panel? Is the lock in the lower left corner closed? If not, highlight your network, then close the lock so you block other networks.

Date is not shown in messages list

For many emails that I am receiving from different accounts, date is not shown in messages list, only time.
It looks like these messages were received today, in fact they are old.
Encountered this problem on 2 different PCs, 3 different mail accounts (gmail and own server).
What could be the reason and how to fix it?

The messages shown without date are not today's, they can be few days, months or even a year old...

OSA Appraisal: custom substatus not shown in phap_catalog_pa

Hi, gurus,
why there is only one substatus shown on the status flow tab of a category and template? i defined sever custom substatus of main status 'in process', but they are not shown at all.
thanks and best regards
Jun

Hi,
I recently worked the appraisal forms. Most of the appraisal templates are created and configured in the SPRO. Or OOAM or PHAP_BASIC transaction code.
as per my understanding , the solution for your question is : you can restrict Lines Reserved for Note is input field (F4 field) there you can select numbers within 1 - 9.
please let me know if you have any issues / concerns.
Thanks,
Ramana

Files not shown in Catalog

I am in the process of moving files from one Hard Drive to another, both in the LR Catalog. The files shows in Explorer but not in the Lightroom Folder. When I try to move the same file from one LR folder to another folder on a different drive but in LR, it wont move it because it says it exists. However, when I try to add that file to the LR catalog is says there is nothing to add.
As a test, I made a new folder in LR; I used explorer to move the file. Then I used LR ADD feature to attempt to add the file to the Catalog. It does not add the file.
I give up; anyone have any ideas?

anyone have any ideas?
Yep, quite a few. Instead of trying to add them back into LR, simply right-click on the folder, and reconnect it to the folder in the new location.
If you relocated many folders, but kept the folder layout, your best bet is to "promote parent" so that they appear under one top level folder, and then reconncect only that one, as LR will then find the rest of them under it.
Cheers!

IPad mini 3 location not shown on iCloud

Hi, I have a new iPad mini 3, I already configured find my iPad and location services, on iCloud it is shown as active, but location is not shown, any help?

Factory reset, and reconfiguration. Solved

Anyconnect created profile not shown in connection list, especially the wireless profiles.

Dears,
Kindly advise as we encounter anyConnect issue, when creating profile for using with ISE, the new created profile is not shown in the connection list.
I’m using profile editor to create profile for EAP-Fast, the issue is that the profile that was created not shown in the connection list.
i put the xml file in the correct location
C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Network Access Manager\newConfigFiles
in windows 7.
it is shown in saved networks but not shown in the connection list.
we tried profile editor version 4 but the same issue still exist.

Hi,
Test the System Connector Type in the Portal.
Connector should be any one of the Types :JDBC, ODBO, XMLA, OLAP then only the BI systems will be appear in the BI integartion wizard,
Govindu

Problem saving contacts in xperia z1. after saving new contacts, it is not shown in contacts list

problem saving contacts in xperia z1. after saving new contacts, it is not shown in contacts list

Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
It sounds like you have a filter enabled in your contact app. Open contact > menu button > filter and see if you have any filter for your phone contact or Google contacts. Also check that "show online contacts" is unchecked.
What are your thoughts about this forum? Let us know by doing this short survey.

SAP CRM 7.0 Standart B2C web Catalog Product prices are not shown

Hi CRM web channel Gurus,
We have done all XCM configurations in terms of 'b2c, isauseradm, shopadmin and ipc' components accordingly. Our catalog replicated to TREX successfully that is used ZB2C pricing procedure from ECC all condition replications are well done. On GUI, we can see the ECC condition on the product master data with tcode COMMPR01 unfortunately on the web we can not see the prices of catalog products.
Moreover after adding a product to shopping basket through completion of the order process then pricing procedure calculates true price that both seem on the web and tcode CRMD_ORDER in terms of checking out ECC conditions.
Is there any missing customizing IPC entries on XCM or RFC destination error on Middleware Parameter in terms of SAPCRM_SPC parameters. Could you please help in order to solve this issue?
all your answers help will be appriciated.
Thanks in Advance
Fahrettin

Hi Mark,
In the Shopadmin for our shop that we are using IPC pricing for the Product catalog
That's exactly true that all of the products condition data are shown 0,00 in terms of enable pricing analysis in the XCM this should allow you to see the Condition data that is resulting in the 0,00 price in the webshop. How can I show the true condition data that is resulting without 0,00 accordingly?
I I have also checked transaction SM53-VMC log display that checked out the logs there is no error log for 1 week on there and the last error log shown below;
Time Stamp Severity Log Name WP VM Thread Name User Client Session ID
2010-07-08T13:21:58+02:00 ERROR com.sap.sce.front.base.DataBase 1 0 RFC Server (out-of-process) WEBADMIN 100 SID:ANON:dtycrm7_DCM_00:0mqOnH7mlNxTnsReeHECpnt22v02-0TwoG42AqI1-ATT
Message: No KB found for arguments: kbId=0 kbLogsysExt=QRTCLNT200 kbNameExt=null kbVersionExt=null productIdExt=0000000000000000000000000000000000000003 productTypeExt=MARA date=Jul 8, 2010 extConfig=no extConfig provided status=2
Kind Regards,
Fahrettin

Customer field Not shown in ME21n and ME22N

Hi,
While creation ME21N and change ME22N we are unable to get Customer field in Delivery address tab of the PO, We are getting Address and Vendor (Sc Vendor) fields in Delivery address tab , but customer not able to see.
The Customer field we can seen through ME23N.
We have cross check screen layout for ME21N and ME22 and NBF here in all cases Customer field is Optional.

Hi,
Please check screen layout for AKTH & AKTV.
Regards
Subbu.

BDT custom SFCs not shown on screen

We have to set up some custom SFC categories, and I have to create new screens for them so that they are included in claims. According to OSS Note 704333, the following needs to be done (this is copied directly from the note):
Enter a new category in the IMG under Claims Management -> Structuring Business Processes -> Structured Facts Capture -> Enhance Facts Capture Categories. Also refer to the documentation for this IMGnode.
Create a BDT view. You have to enter different subscreens and function modules in the view, depending on whether it is a quick question sequence or standard question sequence (dialog box). As examples, you can use view ICLQ08 for the quick question sequence and ICLQ03 for the standard question sequence.
With the standard question sequence you must also assign field groups 50 and 51 to the view.
For a standard question sequence, use screen 300 in SAPLICL_SFC_BDT, for a quick question sequence, on the other hand, use 112 (depending on the desired size).
For the PBO and PAI modules, you have to enter the function modules mentioned for the above views (depending on the category). The PBC module has to be created specifically for your view; the modules entered with the above views can also serve as a template.
In the PBC you have to fill the following fields of structure ICL_SFC:
FACTSCAT: Your new SFC category
DSTSUBCLAIM: Subclaim to which the SFC refers
SUBOBJECT: The key by which the object is clearing identified in the claim, e.g. the number of the damaged object
XREADONLY: To be set in the display mode of the claim
You can fill PBTEXT and VIEW using function module ICL_TBSFC004_GET.
You use function module ICL_SFC_ACTINST_SET to set the values in function group ICL_SFC_BDT. Add the newly created BDT view to the provided screen sequence.
Create a question sequence for your SFC category and assign this to the corresponding internal claim type.
I followed the instructions and created new views for the new SFC's (this is so that I could use my own Function modules in the PBC events. This is the only thing I changed - the PAI and PBO both call standard SAP modules, and all the other stuff, i.e. application etc. I left the same as the standard). I assigned the views to sections --> screens etc. The screen where the SFC should appear, is there but it is blank, i.e. it doesn't show any buttons or anything.
I also hard-coded break points into my PBC modules but these never seem to be called either, because the processing never gets there, evidently. So this leads me to believe that I've missed something out in setting up the funtionality. Any ideas? Also, do I need to do anything in the BDT events to populate the new SFC's or does the system do this automatically?
Thanks for your help.

No I don't think you want ECSFO001 for ISUSDPART either. I recall implementing that last year to disable the create/change functions in the "Search and Display" component as they bypassed BDT field-group security.
I'm not sure where in CIC you want your custom field to display. Do you want to show it in the navigation area?
As for search results (ISUFINDER), I seem to recall that it was possible to configure the finder to show additional attributes of the BOR object type, such as ISUPARTNER. But I might be having myself on there as it's only a vague memory.
As standard, the finder displays columns for the the key and default attribute of the search object, in this case BOR object type ISUPARTNER. The default attribute in this case is name shorttext (can't recall what the attribute is called right now). You could implement a sub-type and override the implementation of this default attribute so that you also display an icon of some sort in the name text if your custom field is set.
Cheers,
Scott

Custom Fields not shown in BSEG using OXK3 transaction

Hi,
I have added new custom fields in Expert Mode using OXK3 transaction to add new fields in BSEG table.
The Include CI_COBL is created with custom fields in OXK3 .
I then tried to add fields by selecting "Add Field to BSEG" but an access key is required which I do not have.
Now is there any other way or what is the next step to reflect the custom fields in BSEG table after creating the CI_COBL in OXK3 transaction.
I do not have access to SAP Marketplace from where I can refer to SAP Notes.
Thanks
Amit

Hello Amit,
Are you sure this is a question related to SAP ByDesign and not SAP ECC?
You will certainly have more luck finding answers in the right forum thread.
Best regards.
Jacques-Antoine Ollier

Calendar event location not shown on iPod

I use iCal to sync with my iPod so that I have all of the information about my scheduled events, i.e. the room number and building of where I need to be at a certain time. In the past this has worked just fine, but for some reason now when I look at my calendar events on my iPod, I can only see the Summary, Date, Time, and Notes. Where did the location go? How can I get it back? Thanks!

The location isn't displayed on the iPod. If you want it you need to move the location information into the description. This has been reported to Apple as a bug, but they haven't done anything about it. The location is actually syncd properly with the iPod, it just isn't displayed.
I wrote an Applescript/Perl script that can be used to update your calendar files so the location is in the description. After you sync normally you open your iPod on the desktop and drag the Calendars folder onto the Applescript and it processes all of your calendar files. It is free.
It is at my website <http://its.usc.edu/~bbellina/downloads>.
Regards,
Brendan Bellina

Z10 - new contacts saved on smartphone, but not shown in contact list

Hello everybody,
I have a problem with my Z10. It does not show me any new contacts in the contact app on the phone. After entering a new contact through the app (from HUB and directly) it won't be shown in my contact list. Not even the phone no in the HUB has been replaced by the name. Sending a new contact from BB9810 by Bluetooth does not even get the contact into the new contact list (even though it's been saved).
Anyway, the contacts have been saved somewhere in the phone, since I can sync them with the BB link on my laptop. Also entering a contact in my windows contacts and syncing the other way around (from laptop to BB) does not get me the contacts into my BB contact list.
Has anybody experienced the same issue, or can advise me where to change settings or do something that may get everything back to normal?
Thanks a lot in advance
mateng

Do this for me.
Do a simple reboot on the BlackBerry in this manner: Reboot: On the side edge volume keys, press and hold down both of the Up and Down volume keys for about 20 seconds, ignoring the initial screenshot message... the screen will go black and reboot.
Now, after the reboot is complete, give it a couple minutes and check your Contacts app again for those missing contacts.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

PSE 8 catalog in custom location not shown in catalog list

Similar Messages

Maybe you are looking for