PSP, router, and modem issues with Remote Play

Background:
Verizon DSL
Westell 6100 modem
WRK54G router
PS3
PSP
I haven't seen a post on this topic yet, so I'll explain the issue.  The Playstation 3 is networkable either through a wired ethernet or wireless connection.  The Playstation Portable is also networkable over wifi.  The PSP has always worked at hot spots for web surfing and gaming.  With the release of the PS3, there was a new feature called Remote Play, which let you connect your PSP to your PS3 and stream the PS3 interface.  You can manipulate the options, watch videos and listen to music, just like you are at the controls of the PS3.  The PS3 has to be put in "remote play" mode for this to work.
Last week, Sony released an update that made this functionality work over the internet.  For most people this worked just fine.  Others had to open ports here or there, but there is a group of users that cannot connect from a hot spot, but can connect over the internet at home.  The original remote play connection (before the update) was a direct connection between the PS3 and PSP.  Now you can connect through your router at home (scan for your router and connect that way).  This connection works since the PS3 and PSP are both connected to the same router in your home.  When you go to a hotspot, you can get all the way up to the point that the PS3 streamed screen should start, but it times out.
This is taken directly from the PS3 owner's manual:
"If the PS3 system is connected to the Internet via two or more routers, communication may not work correctly."
It seems like internet connection from a hot spot doesn't work because the request for the PS3 gets lost between two routers when it gets to my home network.
Finally to my question.  It seems like my Westell 6100 is functioning as a router, as is my WRK54G.  When i look at my modem's settings, it is set up as a bridge protocol in routed bridge mode.  Everything else I try makes me lose my internet connection.
Anybody know what I'm talking about or have any suggestions?
Thanks

A lot of PS3/PSP owners are having this issue with Remote Play. I have a WRT350N and have been through Sony forum as well as this one to know about all setups from port forwarding to giving your PS3 a static IP and placing in DMZ. I can say I had success connected via or public wi-fi but I also noticed how unstable Remote Play is. There will be times you can connect to it but if you turn your PS3 completely off (not standby) and back on you will pretty much need to setup your PSP again with the PS3 for Remote Play. The problem itself lies more with Sony and not our modem and routers except that fact that you do have to make some minor changes like disable UPnP, forward ports and etc. I own the Sony LocationFree Player which uses a similiar function like Remote Play but instead gives you control over your cable tv remotely anywhere on laptop or psp. LocationFree never failed me since day one because Sony created a DDNS for it which worked for me no matter who my carrier was or what router I have used over the years. Remote Play was introduced later for PS3 which pretty much like LocationFree but Sony doesn't provide a DDNS for it, instead we have to go through all the crazy configurations which is never stable. However you can register for a DDNS at DynDNS.org and configure your router with it which I have done before and found it to be very stable. No matter what Sony still needs to address the issue with the PS3 communication for Remote Play. You can find a lot of info here for setting up DDNS and as for Remote Play your better off going to the Playstation Forums. Good Luck!

Similar Messages

  • Issue with Linksys Router and Modem with Vonage Device

    Hello,
    I have a Linksys Router and Cable Modem.  Plus I have Vonage for my home phone.  I have been having several problems and now, my Vonage phone will not work at all.  I have cable internet and my ISP is Cox Commuication.  I do not know how to connect my Vonage device with my Router and Modem.  People have been giving me advice, but nothing has worked.
    Does anyone know how to intergrate all three of these items together?  Basically which plug goes where.  Currently my phone is not working.  The only thing that is in use right now is my linksys cable modem.  I have the power cord plugged in, the blue cord from the modem plugged into my laptop, and the cable from the modem to the wall jack.  Please help.  Thank-You!
    Linksys Router:  WRT54G version 6
    Linksys Cable Modem:  BEFCMU10
    Vonage (Motorola):  VT2143-VD
    Message Edited by preshe79 on 03-16-2008 03:56 PM
    Message Edited by preshe79 on 03-16-2008 03:58 PM

    The router should be online first. Can you get into the router's configuration page?
    The box said windows xp or better... So I installed Linux!

  • HT204406 am having issues with songs playing in there entirety.  song starts playing and then half way stops and starts playing the second song of say a minute or so and then no sound until end of second song.   it then starts to play third song and it do

    any one having issues with songs playing in there entirety using itunes match?  plays parts of songs and skips and starts playing second song.  part and then keeps playing with no music.  does this on every set of songs.

    I'm having this issue on my iPod and now none of my songs on iTunes will play. Not fix yet though. Have you had any luck?

  • We use dial up and upon updating to Firefox 10 we have had issues with facebook/ playing games...please help!

    We use dial up and upon updating to Firefox 10 we have had issues with facebook/playing games...please help!

    Hi nancybrendel,
    Have you looked at the Knowledge Base article [[Problems using Facebook in Firefox]]? There is a lot of good troubleshooting information in there. Please be sure to try all of the suggested steps. Each one is valuable and may be the answer to your issue.
    Hopefully this helps!

  • I have 3dparty software wirelessly with a cryptographic authentication system without my consent (seems to be new technology developed by stanford) obtaining ownership of my iPhone 4s software and controlling it with remote device to jail break. Now what?

    I have 3rd party software wirelessly injected and used on my iphone with a cryptographic authentication system without my consent (seems to be new technology developed by stanford and apple security is not updated for this technology) obtaining ownership of my iPhone 4s software and controlling it with remote device to jail breaking my phone, adding and removing software, changing settings all from a remotely controled device from different location (I have a Mac address I'd of this device to know for sure). Almost undetectable. When I look at the legal section of my phone it shows a list of all the unauthorized 3rd party software "as is" copyright encrypted on the phone.  This is the most basic way to legally steal software of any kind.  Because of this legalality 3rd party ownership have total control of certain software correlated with hardware use including visualization technology, etc.  most people luckily will never have this happen to them so it's unlikely many readers have not a clue of what I'm saying currently.  Either way, without needing to obtain specific warranty of any kind "as is" copyright control makes system restores not a solution because the source code is not directly encrypted on the actual hardware device only a copy right notice must appear on the specific device 3rd party software validation making it extremely difficult for me to take control of the situation. Apple claims their iOS technology prevents this type copyright obstruction from being possible, however, according to my phone a new form of technology was used developed by Tom wu of Stanford university called the STANFORD SRP AUTHENTICATION TECHNOLOGY which uses Some form of cryptographic authentication system and uses quote "secure remote password" which seems to suceed in hacking iOS apple technology apple claims is not possible to jailbreak an unstolen phone or without the owners consent As well as loading the device with 3rd party copyright Notices to make all of this legalized. My phone shows atleast 30 pages worth of legalized 3rd party copyright permissions! Yesterday my apple care provider labeled me a jailbreaker and refused to look at my legal documented proof which completely blew my mind because it voides my apple care contract I spent 100 on. This employee did not take all factors into consideration and made quick assumptions as well as verbally speaking to me as I'm an automatic criminal. I left the store yesterday with no payed insurance help on a problem I had no control over and couldn't prevent, leaving with voided contracts. This is an apple users worst nightmare and I have spent days researching all of this like i am some kind of lawyer only to be able to use my phone the way it should and spent alot of money on.  I can legally backup any claim I have just wrote above currently and have a large source of data collected to prove apple is wrong in voiding insurance support on this issue. The problem lies in apple avoiding and not wanting to believe their software can legally be obtained ot "hacked". Yet still labeled a jailbreaker basically.. What should I do????? Been to local apple store 3 times and rebooted my phone as well sprint service restore 4 times and spoke with reps twiice on the phone. Spoke with my phone provider who said apple has full control over these matters so they can't help me.  My case is according to apple "still open"...Anyone else heard of this or of Stanford's office of technology licensing? Maybe I need to buy a blackberry again or just use a landline so I can stop being my own lawyer and focus on other productive areas in life instead of this horrible mess. I shouldn't have to prove to apple I not a jailbreaker they should have to prove I'm one before voiding support I desperately need!!

    Mullaly75 wrote:
    I assume u guys don't understand what open source software is
    Yes, I think most of us do understand what open source software is. It sounds as if you don't. Here's some information:
    Open-source software (OSS) is computer software that is available in source code form: the source code and certain other rights normally reserved forcopyright holders are provided under an open-source license that permits users to study, change, improve and at times also to distribute the software.
    Open source software is very often developed in a public, collaborative manner. Open-source software is the most prominent example of open-sourcedevelopment and often compared to (technically defined) user-generated content or (legally defined) open content movements.
    from http://en.wikipedia.org/wiki/Open_source_software
    Yes, Tom Wu of Stanford wrote a paper on something called Secure Remote Access Protocol. It's a form of Asymetric Key Exchange and has nothing to do with hacking anything. It's actually intended to protect data.

  • Just moved to new home, updated router and new system with Time Warner and now we cannot get the appl

    just moved to new home, updated router and new system with Time Warner and now we cannot get the apple any ideas?

    Castle15 wrote:
    just moved to new home, updated router and new system with Time Warner and now we cannot get the apple any ideas?
    Cannot get the Apple.. what?
    Model and actual device you are talking about?
    Apple covers a pretty huge range.. If you mean extreme.. did you reset it to factory and start over.. that is always necessary when you change a network. You cannot pick up a router from one home and network and plonk it into another and have it work.. aint gonna happen.
    You also need to power down any pure cable modem for 20min or so to get it to forget the old MAC address that captured the IP so the Apple ??? has a chance to work.

  • I have slow internet speed and having issue with download of photoshop cc is there an alternate I can go somewhere with high speed to download.

    I have slow internet speed and having issue with download of photoshop cc is there an alternate I can go somewhere with high speed to download. without using this creative cloud that downloads first.

    We need to know more about your system, please download EtreCheck and run the report and please post it on your next reply. Then we can see how your system is configured, what apps are on it and look for anything obvious. We will look forward to seeing your report.

  • Firefox 3.6.23 having freezing and rebooting issues with Adobe Flash Player 11 Plugin

    Firefox 3.6.23 is experiencing constant freezing and rebooting issues with Adobe Flash Player 11 Plugin, not sure if it is a conflict issue or not.
    Since the update there had been no reported issues till today when the blue screen came up on me, this issue prior to plug in 11 had occurred at least 6 times, this issue only happens on firefox.
    I do not wish to update since recent firefox browsers seem to have a lot of ongoing issues.

    Anyone able to help please?
    Thanks.

  • Always have to restart router and modem.

    I don't think this actually is the airport's fault and this only happens at my house, but maybe someone would know.
    I have airport extremes in my G5 and ibook, and a linksys broadband modem, and a motorola router. if i restart my computers or the computers go to sleep i always have to unplug the modem and router to reset them; then the internet finally works. The only place i ever have to do this is my house, it always automatically works anywhere else. Anyone know what could be causing this?

    when i first turn on the computer, or wake it up from sleeping the airport wireless recognizes my wireless connection but can't connect to the internet. when i unplug the router and modem i unplug it, wait about 10 seconds then plug it back in. after doing this my internet works fine for as long as the computer stays on. if i turn it off, or put it to sleep again, however, then i must unplug the router and modem again. i don't know why unplugging it works, but i was hoping maybe someone knew what i could do to have it just work automatically.

  • Hi  have the ipod touch and having issue with the reminders app. do not have the reminders page  just the completed page

    hi  have the ipod touch and having issue with the reminders app. do not have the reminders page  just the completed page

    The problem has been fixed with the most recent OS X software update.

  • Any suggestions on how to get wifi to work?  I have a multitech router and can connect with a computer wirelessly but not the ipad.

    Any suggestions on how to get wifi to work?  I have a multitech router and can connect with a computer wirelessly but not the ipad.

    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398

  • Need explanation on prerouting post routing and translation rouitng with examples

    Hi ,
    i need explanation on prerouting post routing and translation rouitng  with examples.can anybody help me out ?
    thanks in advance
    regards
    bala

    Hi,
    prereouting: call comes in, hits ICM, script is run, telling the routing client (PSTN) where to route the call to (so the call is routed before (pre-) connection, or rather, establishment).
    Postrouting: call comes in, is connected and then it hits ICM (so the call is routed after begin connected).
    Translation routing is an interesting hybrid: call comes in, is connected but the party the call is connected to, is being monitored by ICM (so it sends the call away but it keeps an eye on it). When it's necessary, call is transferred to a different destination.
    Examples:
    Prerouting: PSTN -> ICM (script) -> PSTN -> destination phone answers
    Postrouting: PSTN -> call is answered -> ICM -> transfer to destination phone, answered
    Translation routing: PSTN -> call is answered -> ICM transfers to IVR port, then transfers to final destination phone (agent).
    G.

  • I just bought a iPod nano 7th gen and having issues with clear radio channels. Please help.

    I just bought a iPod nano 7th gen and having issues with clear radio channels. Please help.

    You can send it in to them: https://expresslane.apple.com/GetproductgroupList.action?PRKEYS=PF3

  • Double computer name on network and NAT issue with Back to My Mac

    These are the problems I am having:
    When my MacPro workstation (which on the network is named "The Beast") wakes from sleep - I get a message saying "there is already a computer on the network with the name "The Beast". Other computers on the network can now find you at "The Beast-2"" and it gives me a new name in the file sharing preferences - even though it is the only computer on the network with that name.
    Why is this happening???
    The other problem is with BackTo My Mac - When I try to enable it - I get an error message saying "Turn off NAT Addressing" - which I thought was turned off since the AEBS is in Bridge Mode. Why is this happening?
    Here is my network setup which consists of the Modem / Router from my ISP - an Airport Extreme Base Station and one Airport Express - which is connected to my MacPro via ethernet. The MacPro does not have an airport card installed and is running OSX 10.6.8 - all other computers / devices are running 10.7.x and iOS6).
    VDSL Modem / Router (from Internet provider) with wireless turned off - (so it is not broadcasting a competing wireless signal) - connected via ethernet to my Airport Extreme Base Station.
    Here are all the settings on the AEBS and the Airport Express: - I am using Airport Utility 5.6.1 on my Mac Pro running OSX 10.6.8 - so the setup prefs are different than the newer version of Airport Utility found on 10.7.x systems - but both work fine. Although I did notice that the option to allow ethernet clients to connect to the Airport Express does not exist (or I just didn't find it) in the newer version of Airport Utility.
    Airport Extreme Base Station is set up as follows:
    Wireless Mode: Create a Wireless Network
    Wireless Settings:
    Allow this network to be extended IS CHECKED
    Radio Mode: 802.11n (b and g compatible)
    Wireless Security: WPA/WPA2 Personal
    Access Control:
    MAC Address Access Control: Not Enabled
    Internet Settings:
    Internet Connection:
    Connect Using: Ethernet
    Connection Sharing: OFF (Bridge Mode).
    TCP/IP:
    Configure IPv4: Using DHCP
    Advanced Settings:
    Logging & Statistics:
    Syslog Destination Address is blank (as in nothing appears in this field).
    Syslog Level: 5 - Notice
    Allow SNMP is CHECKED
    MobileMe:
    Back to my Mac is turned off - but if I try to turn it on I get an error message saying "Turn off NAT Addressing - which I thought was turned off since the AEBS is in Bridge Mode. Why is this happening?
    IPv6:
    IPv6 Mode: Link-local only
    As stated - my MacPro with no wifi card -  is connected via ethernet to an Airport Express which connects wirelessly to the AEBS for network and internet access.
    Airport Express Settings:
    Airport Settings:
    Wireless Mode: Join a Wireless Network
    Allow Ethernet Clients IS CHECKED
    Wireless Security WPA/WPA2 Personal
    Internet Settings: Are grayed out (as in I can't change these settings - I assume because they are being controlled by the AEBS) and read as follows:
    Connect Using: Wireless Network
    Connection Sharing: OFF (Bridge Mode)
    TCP/IP:
    Configure IPv4: using DHCP
    All other settings are identical to the AEBS.
    All other WiFi devices in the house (MacBook Pro, iPhones, iPad's, iMac, Apple TV, Nintendo Wii etc…all are able to connect to the network and connect to the internet - no problem.
    Thanks for any insights into what might be causing the double name on the network and why it is asking me to turn off NAT addressing - when both my Airport devices are in Bridge Mode?

    I am also having this issue... any updates on this??

  • Unable to log into iMessage and intermittent issues with FaceTime

    Late 2011 MacBook Pro, OS X 10.8.4.  I'm an admin level Windows guy but a relatively new (and otherwise very pleased) convert to Mac OS.
    This morning Messages started repeatedly prompting me for my iMessage password and FaceTime has starting working only intermittently.  Both work fine from my iPad and iPhone 5.  Both have been working from my MacBook Pro for months.
    This morning when I tried to fire up Messages on the MacBook I got an error saying "The server encountered an error processing registration".  After doing some Googling, I noticed that many folks said that when they had this problem they also had an issue with FaceTime.  I confirmed that FaceTime was indeed giving me the same error as iMessage. After trying some solutions from past threads that didn't work, I rebooted.  Now instead of throwing an error, Messages just keeps asking me for my iMessage password again and again.  FaceTime works occasionally but sometimes when I get a call and click answer, I get "call failed" as my iPhone and iPad continue to ring and then I'm asked to re-enter my password on the MacBook.  If I enter my password it just sits and spins.  If i quit FaceTime and start it again, it'll usually log in successfully but calls may or may not work (following the same pattern I just mentioned).
    The odd thing to me is that when I tested FaceTime on my iPad, I got notifications on my iPad and iPhone and my primary and alternate email address were now registered with FaceTime.  They have been for over a year so I'm not sure why I'm getting those notifications again.
    I'm able to log into the Mac App store without a problem using the same AppleID
    What I've tried so far based on Google results:
    1. In Keychain Access, reset my default keychain - No improvement
    2. In Keychain Access, selected Keychain First Aid, repaired and verified - No improvement
    3. On my iPad, turned iMessage off and back on - No improvement, though iMessage on the iPad still works fine
    4. Confirmed that my primary and secondary AppleID email addresses and password are correct.  The email address associated with my AppleID is not associated with any other AppleIDs.
    Thanks!

    This could be a complicated problem to solve, as there are many possible causes for it. Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
    Before proceeding, test on another network, if possible. That could be a public Wi-Fi hotspot, if your computer is portable, or a cellular network if you have a mobile device that can share its Internet connection. If you find that iMessage works on the other network, the problem is in your network or at your ISP, not in your computer.
    Step 1
    Check the status of the service. If the service is down, wait tor it to come back up. There may be a localized outage, even if the status indicator is green.
    Step 2
    Restart your broadband device and your router, if different. You may have to skip this step if you don't control those devices.
    Step 3
    From the menu bar, select
     ▹ About This Mac
    Below the "OS X" legend in the window that opens, the OS version appears. Click the version line twice to display the serial number. If the number is missing or obviously invalid, take the machine to an Apple Store or other authorized service center to have the problem corrected.
    Step 4
    Take the steps suggested in this support article. If you don't understand some of the steps or can't carry them out, ask for guidance.
    Step 5
    From the menu bar, select
     ▹ System Preferences ▹ Network
    If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. If the box marked SOCKS Proxy is checked, uncheck it. You don’t need to change any other settings in the window. Click OK and then Apply. Test.
    The result may be that you can't connect to the Internet at all. Revert the change if that happens, or if iMessage still doesn't work. Remember that you must Apply any changes you make in the preference pane before they take effect.
    Step 6
    Select from the menu bar
     ▹ System Preferences… ▹ Flash Player ▹ Storage
    and click
    Block all sites from storing information on this computer
    Close the preference pane.
    Step 7
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    If iMessage worked in the guest account, stop here and post your results.
    Step 8
    Boot in safe mode and log in. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs.  The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. After testing, reboot as usual (i.e., not in safe mode) and test again.
    If iMessage worked in safe mode, but didn't work when you booted out of safe mode, stop here and post your results.
    Step 9
    Reset the NVRAM.
    Step 10
    Reinstall OS X.
    Step 11
    If none of the above steps resolves the issue, make a "Genius" appointment at an Apple Store, or contact Apple Support.

Maybe you are looking for