PSU-Suggestion-Help

Hi,
I try to build a new Sytem based on MSI KT4 Ultra and AMD ATHLON XP 1800.I own 2 different power supplies and i would like your suggestion to which of these is better for this System.
PSU 1
Manufacturer:Codegen
Model:300X
Watt:300
+3,3V=14A
+5V=30A
+12V=13A
-5V=0,5A
-12V=0,8A
+5VSB=2A
PSU 2
Manufacturer:unknown (maybe Linkworld)
Model:LPK9-350W
Watt:350
+3,3V=18A
+5V=25A
+12V=13A
-5V=0,5A
-12V=0,8A
+5VSB=2A
Thanks

I agree. You're building a new system. Sooner or later you'll want to or have to start adding things. Consider this one, around 60$ in my translation:
http://www.hipergroup.com/English/products/hpu-4s425.html
Or this, for a little more money and less noice:
http://www.zalman.co.kr/eng/product/view.asp?idx=76&code=
Blame Codegen for me being here! It's that bad!

Similar Messages

HT1363 My old iPod Nano says to use iTunes to restore and I've followed all suggested help steps, but I can't get it into disk mode nor can I get it to show in my computer or in iTunes.

My old iPod Nano says to use iTunes to restore and I've followed all suggested help steps, but I can't get it into disk mode nor can I get it to show in my computer or in iTunes. I have the latest version of iTunes. Windows has all the most recent updates too. I can reset the iPod, but the message to Use iTunes to restore comes back and I am stuck.

Already tried another USB port, still nothing.
I don't have another PC to check, I only have one which is the one not working with my iPod.
It appears under my Computer, just not under iTunes. Plus, the iPod classic troubleshooting assistant doesn't work because I can't restore since it can't come up onto my iTunes! Even my iPod says "Use iTunes to Restore" once in a while, but I plug it in & I'm not able to restore it since it won't come up under iTunes.
Please help

3rd gen iPod touch. I just get a blank screen (after a few secs of the apple symbol) when it is switched on or when connected for charging. I know the connections are OK. Suggestions/help please

3rd gen iPod touch. I just get a blank screen (after a few secs of the apple symbol) when it is switched on or when connected for charging. I know the connections are OK. Suggestions/help please

I took the iPod to the local Apple shop. The guy put the iPod onto a docking station and checked it - answer "connections are OK". I have used the link before but have not gone through all its suggestions (although picked on the most relevant ones). I may have to go back. Thanks again for your suggestions

Vmfusion problem: i am running 10.8.5 trying to run 10.6 on vmfusion but its not working any suggestions/help?

i am running 10.8.5 trying to run 10.6 on vmfusion but its not working any suggestions/help? i get this same error

hummingbird.jeff wrote:
Hi Agan:
Yes indeed ddanielsun is encountering the same problem that led me to initiate this thread ... If you try to install any of the available 10.9.x from 10.6.8 the installer exits with an error "10.9 required for this update" ... seems strange that 10.9 is so very hard to find ! ! !
jeff
Clearly you can not update 10.9 if you do not have 10.9
It is very easy to find, it is in the App Store as the picture I posted earlier displays. Follow the same instructions. If you can't then use THIS LINK which will take you there.
The current version of 10.9 is 10.9.5 and that is what you will get.

My ipad suddenly not connecting to wifi internet but you can see the internet icon at the upper left side which means its connected.some of the apps are slowly connecting most of it are not,your suggestion/help are much appreciated,thank you.

My ipad suddenly cannot connect to wifi internet,you can see the icon that its connected but most of the apps are not opening with message not connected to internet...
Please your suggestions / help are very much appreciated
Thanks

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
If no joy...
Reset all settings
Settings > General > Reset > Reset all Settings.
This will return all iDevice settings to factory defaults... you will not lose any data.... But you will have to re-enter all of the device settings.

When i put the switch on silence the phone still rings...any suggestions/help on this question

I flip on my silent switch and the phone still rings on my iphone 4....any suggestions/help is greatly appreciated

Try a Reset,
Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release the buttons...
http://support.apple.com/kb/ht1430
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

HP p6310y PSU upgrade help!!!!

I need to know what PSU ( 600W) fits my case because i am upgrading my graphics card from the 9100 to the EVGA GTS 250.
any help would be appreciated!
Thanks!
This question was solved.
View Solution.

Most standard ATX power supplies will fit. However, it's best to measure your exisitng PSU just to confirm it and to get a feel for how much extra room is available. A standard ATX power supply is 5.9" by 5.5" by 3.5". The HP mini-tower cabinets are tight inside so I wouldn't go too far outside the standard ATX PSU size. Pick a modular PSU to help minimize the cabling issues. The efficiency rating and warranty period are also items to consider. Look at the 12+ volt amperage rating for the PSU you are looking to buy. Not all PSUs are created equal. www.newegg.com
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

I have a p6267c. Want to upgrade GPU and PSU. Help PLS

Hey guys. I need to upgrade my GPU and PSU. Please tell me some that are compatible for me to upgrade to.
I had these in mind,
GPU : http://www.newegg.com/Product/Product.aspx?Item=N82E16814103194
PSU : http://www.newegg.com/Product/Product.aspx?Item=N82E16817139005
Will these fit?
Please reply fast! Thank you!

Fidanza, welcome to the forum.
It would help us if we knew what you do with the computer.
I like your choice of PSU's. Corsair makes a great product. You should measure the current PSU and compare the measurements to this one.
The specs on the video card don't give the dimensions. I suggest staying under 9" in length. This will help to assure that it will fit without problems. I like PNY, but they are more for everyday type projects; surfing, word processing, etc. If you want to game, I would suggest XFX, BFG, EVGA or Sapphire.
Please click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Random Shutdowns on a MBP Core Duo, Suggestions/Help would be great

I've had two random shutdowns of my mac since purchasing it back in August. The first happened on January 11th, when it said it was at 11-12% power. The second happened about two weeks later, at 23% power. I've been looking around these forums and other pages, and haven't really found anything that has helped so far.
Details of the first crash:
Open apps- Firefox (5 windows, two had about 20+ tabs open, the rest were single page, and yes, I know it crashes often with that many), Camino (1 window with 5 tabs), and Word 2004, as well as Quicktime open to the iPhone stream.
I had an USB key plugged in, to which I was saving my Word document.
So I was working in Word while in front of the TV and during an interesting bit, didn't do anything for a minute. So, like the many times earlier, it slept the display to conserve power (in "Better Energy Savings" mode). I moved my finger on the trackpad to wake it back up, and it turned back on the backlighting, and then stopped. I thought it had just went back to sleep, but after a few key presses and a check of the light that usually pulsates when it's sleeping (plus the USB key , I found out that the computer had turned off. I let it sit for a while, and when I plugged it back into AC power and turned it on, with my USB key still plugged in, and although it booted to my desktop, the Finder never started (so no desktop icons for anything), unplugging the USB key fixed this and everything returned to normal. I then installed the only update I was missing, one for iChat, restarted, and continued working.
In the second incident, I only had my browsers open, nothing external plugged in, and my displayed was dimmed to the third darkest level. When it was at about 23% power, it once again randomly shut down. This time, I attempted to turn it back on, and nothing happened. After plugging it into AC power, it turned on and once logged in showed a very low (2-6%) power, so I guess it was reporting the power incorrectly?
Anyways, went back to look at the battery exchange on Apple's website. I had checked before when they started it, and was pretty sure mine wasn't covered, and a second check confirmed that. My Mac's serial is W8618091VWX, which isn't covered by the recall.
So, I have a few questions:
1. Is there a toll-free number I can phone Apple (Canada) at? The only number I've found seems to be only free for those who bought their computer in the last 90 days, which I'm no longer covered by, and haven't been for a while. Talking to someone at Apple would be good.
2. Otherwise, if I took my computer to an Authorized Service Provider, would they be able to take a look at it and answer some questions? I bought my MBP at a London Drugs and they aren't service providers, so how much would it cost to do this?
3. Is there a definite cause for these random shutdowns? It seems to vary among other people, so it would be helpful if I could try something to eliminate one of the causes.
4. Does Tiger report battery levels pretty accurately? In the past when I reached 6% I got a warning and was able to plug it into AC power and had no problems.
Thanks for any help you can provide.
Macbook Pro 2.16 GHZ Core Duo, 15.4", 1GB RAM Mac OS X (10.4.8)

I had this problem of RSD fixed for a while after having had the battery replaced by Apple, till yesterday, when the MBP suddenly experienced a shutdown during a meeting presentation, while it was connected to the AC power. At the first restart, as coming back from a stop-mode, for a while appeared a warning of low-battery level, with battery level indicator flashing red and showing the empty icon but with a 86% of charge level and a new shut-down definitely put the MBP out of service, no way to have it functioning again. Obviously, AC power was OK, no problem with the microphone or the projector ( I was at the podium of an international meeting) and a lucky precaution ( double save of the same presentation on a friend's twin MBP, that worked correctly) saved the job.
Then, a couple of hour later, my MBP started up normally and everything works fine, with or without MAGsafe connected to AC power, almost up to now.
I've read the post with a link to the procedure for resetting the power controller chip on the mainboard, I'll do it in a minute, hoping that this will help.
Any further suggestion?
ambabu, Italy

App Suggestions help

Hi. Planning on getting an iPhone 5S/6 but i need help in suggestions for alternative apps with:
1. Music Player - I'm looking for a music player that has custom or user-defined equaliser settings, ability to transfer/receive files from a Macbook via wifi, share options, add Playlists on-the fly, deleting songs on-the fly and some other sound-enhacing features.
2. Ringtones - I'm looking for an app that lets you assign an MP3 file as a ringtone without the use of iTunes.
3. Video player - A good media player that plays excellent movies with various media format compatibility?
4. Photo sharing - I'm looking for an app that has good and simple editing tools and at the same time has the ability to share to more services directly & on-the-fly to Google Drive, Dropbox, Email, etc.?
Please advice. Thanks.

gino_76ph wrote:
Hi. Planning on getting an iPhone 5S/6 but i need help in suggestions for alternative apps with:
1. Music Player - I'm looking for a music player that has custom or user-defined equaliser settings, ability to transfer/receive files from a Macbook via wifi, share options, add Playlists on-the fly, deleting songs on-the fly and some other sound-enhacing features.
2. Ringtones - I'm looking for an app that lets you assign an MP3 file as a ringtone without the use of iTunes.
3. Video player - A good media player that plays excellent movies with various media format compatibility?
4. Photo sharing - I'm looking for an app that has good and simple editing tools and at the same time has the ability to share to more services directly & on-the-fly to Google Drive, Dropbox, Email, etc.?
Please advice. Thanks.
I can tell you for sure any app you download to create a ringtone you will need to sync with iTunes.

TS1702 New iPad 2 5.1.1 won't download apps says 'waiting' I've done all suggestions help!?

I need help. This is my first apple product. Added books in bookstore app. Added instagram and instagram editor app and now it won't let me download anymore apps. It says waiting and app never stays. I'm trying to download fb, etsy, and myfitnesspal. I've turned device off and on. Removed 'waiting' apps and tried to just download etsy app but still not working. PLease help.

Ok, there's a lot here, but something in here might work for you.
Go to Settings>General>Date and Time>Set Automatically>Off. Set the date one year ahead. Try to update the apps again. If you get an error message, go back to the settings. Correct the date and time (set automatically) then go back and try to update the apps again.
For iOS 6 only ....Settings>Privacy>Location Services>System Services (swipe to the bottom of the page to find this)>Location Based iAds>Off.
If the downloads are stalled or "waiting" - try these suggestions.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again.
If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad.

PSU please help

Lo all,
Looking for a new psu fro my k8n neo platinum,amd 64 3400+ i've looked for oens with greater than 24a at 12v buts that about all i can find in the forums, any help wud be greatly appreciated thank you!

I really like my Tagan TG480-U01 480W (+3.3V/28A +5V/54A +12/28A). Although it has a fraction less power on the + 12V rail than Bas's Enermax, it is very quiet and does look cool! Check it out here: Tagan 480-U01 480W
I don't know where you live, but since Tagan is a German company it might be hard to find this PSU outside of Europe...?
$p00f3r
edit: Had a look around, and it is more available than I thought:
http://www.tagan.com/wheretobuy.htm

Quiet PSU suggestions

I am upgrading in the near future (see my sig) and wanted to make a quiet system that could also do some moderate overclocking (I'd be happy with 10-20%).
However, after lurking here for a while, it appears that the Antec 380W PSU with only 18A on 12V may not be up to the job. So I am looking for an alternative that would also be quiet.
The Enermax 465 and Aspire 500 seem to be popular choices, but how quiet are they? They have manual fan controllers, but can you really run them at low fan speeds?
Are there any other PSUs that would be quieter without significantly upping the cost? I looked at the Thermaltake Silent Purepower 480 but it only has 18A on 12V, and also at the Enermax Noisetaker series but they have dual 12V rails.
Thanks.

The Tagan 480 is the most quiet PSU i've ever used and i've used quite a few silent PSUs so far. The build quality is excellent and if you do some reading on other forums you'll find many people who agree. I own the 365W Enermax and it's significantly noiser in comparison (to my ears). According to reviews the Enermax is around 40dba and the Tagan peaks at 28dba (5dba = double the noise). I bought myself one after i realised how quiet it was when i built a pc for my friend. It's a really nice PSU.
BTW, game lag has nothing to do with the PSU. It's most likely your internet connection or hard drive.
Some general figures (correct me if i'm wrong):
In terms of amps on the 12v line:
1. PC Power and Cooling Turbo-Cool 510 (34a)
1. Enermax, OCZ (33a)
2. Tagan, Vantec (28a)
3. Seasonic (25a)
4. Antec (22a)
5. QTechnology, Zalman (18a)
6. SilentX (17a)
In terms of noise levels:
1. Tagan (using this now), Zalman (according to another user)
2. QTechnlogy, Seasonic, SilentX (I've tried the QTechnology and Seasonic)
3. OCZ (I read it's noiser than the Tagan even though they're the same inside)
4. Antec True Blue (from reviews)
5. Enermax (i've used the 365W version)
6. Vantec (very noisy according to reviews and boards)
* Don't know the exact noise levels of the Turbo-Cool but with a 40cfm outtake fan it should be on the bottom of the list in terms of noise.
Hope that helps!

Suggestions/Help - Authentication method and tracking of acess/download

Hello all.
Recently i've got a mission to do on Sharepoint and i would like to ask you guys for some suggestions on how to do this:
-Create an authentication method and tracking of access and download documents from one page.
Already tried some ways but no success until now, then i come here to ask for your help.
I am a beginner in sharepoint development so please try to speak in the simplest possible way, some terms i may end up not understanding.
I do Really appreciate all the help.

Hopefully you have access to Central Administration. If you don't, I think you don't have the control over the farm you will need to accomplish your task. Go into Central Admin. On the left side you will see an option "Upgrade and
Migration". Select the option "Convert farm license type". The next page will tell you the current license version. I'm not sure about Foundation, but I expect that the upgrade and migration link won't be available at all and
thus could be assumed to be Foundation which may not have the functionality you desire. The list at
http://technet.microsoft.com/en-us/library/jj819267.aspx will show you that they are only available in the Standard or Enterprise version.

Single Page Application Design Approach Suggestion/Help

we have a new project requirement where we need to develop a single page application. My manager told me to do a research like whether we can use any content management system. Our requirement is we have lots of plugins. We are planning to create plugin download
and help system, where others can download the plugins,see demos and copy the code like the jquery.com and getbootstrap like below.Also we need to add a rating feature for each plugin.
http://getbootstrap.com/components/
Our client need it as a SPA and asked to check any CMS(content management system) like orchard,Drupal,WordPress or anything will help. Or we he put an option of Sharepoint or a MVC application with Angular/JQuery. Could you please give your suggestions for
the same.
vin

Please post questions related to ASP.NET in the ASP.NET forums (http://forums.asp.net ).

PSU-Suggestion-Help

Similar Messages

Maybe you are looking for