Pub and Sub question

I am in the process of developing interface where source system will pubish the data in Que and target system will subscribe it.
The question I have when I create a Que in source system how this que become visible to target system. When I am creating Que in the source system to put the message. Source system is intracting with middle ware and targeting system is intracting with middle

The question is what it the middleware performing in the middle. Generally SOA Suite will read from a queue. This will exist in one application / machine. It will perform transformations and place it on another queue (traget system). This queue will most probably reside in another application / machine.
The middleware is the glue that help 2 applications communicate with each other.
Therefore you have 2 queues using 2 different connection pools / data sources.
cheers
James

Similar Messages

Running dhcp on CUCM PUB and SUB

hi Guys,
just wanted to find out if I can run DHCP on both pub and sub for same subnet without split scope of ip addresses? as far as my research goes, it is not talked about anywhere (only spit scope docs are available). if I enabled pub and sub for a subnet with same start and end IP add range , would there be an issue? would sub know that pub has already assigned an ip x.x.x.x to an end device and avoid assigning it to another device requesting dhcp?
also as far as I understand there is no redundancy mechanism for dhcp. if we specify 2 dhcp severs using ip-helper address, the dhcp request goes to both servers and the device takes the ip add of the dhcp server who responds faster.
thank you.
vijay

hi,
you can not change any configuration on the subscriber, it is not designed for configuration, you can only make changes on the publisher and changes synchronized to subscribers.

CER PUB and SUB in Different Locations

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;}
I currently have two servers for CER, a pub and a sub. The customer wants to put these two servers at different locations for disaster recovery. I know exactly how to configure a Pub in Sub for CER but I'm wondering what are the network requirements for this type of design. I've been through all the Doc's on CER but I'm not finding anything. Any help would be appreciated. Thanks

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
I found the answer to my question in the install Guide.
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
Consider installing the standby server in a physically separate location from the primary server, and on a separate subnet not separated by a WAN link.” Hope this helps someone else in the future

Rebooting CUCM Pub and Sub

I'm going to be rebooting my CUCM this weekend. This will be my first time and I've read the article https://supportforums.cisco.com/docs/DOC-4870.
I understand rebooting the Pub, let it come all the way back up, and then reboot the Sub. My only question is if there are any general gotchas or things to look out for. I'm just trying to absorb as much info as possible and get my ducks-in-a-row before I do this.
Thought this would be a good place to get some general, possibly "non-offical", but still great advise.
Thanks all

This is all starting to come together now. Thank you both for you input!
Just to wrap it up:
First I'll reboot the Pub. I'll run either a cli command or report/RTMT to view replication status and wait until replication status is a 2. Once db replication is in order then I'll take down the Sub. At that point the phones (in my config) will failover/register with the Pub. I'll begin checking db replication again. Once that is back to a 2 then check phones and wait until they re-register with my Sub. Then I can begin to make test calls in/out the sip trunks and test calls to CUC.
Does that sound about right? Am I over simplifiying anything?

How long can Pub and Sub have loss of communication?

We have the following clusters:
UCCX System version: 8.5.1.11004-25
CUCM System version: 8.6.2.22900-9
My understanding is that UCCX cluster can loose communication for 48 hrs, then there are issues with the database? Is this correct?
How long can a Publisher and Subscriber be out of communication before there are database problems, or a rebuild is needed?
I have heard that more than 48 hours, a manual resync is needed. What if it is seven days?
Does the Sub need to just be rebuilt?
Do the same rules hold true for CUCM?

Hi markala,
As per the End User License Agreement a single purchase of retail license for Acrobat is good for 2 computers.
If you want to install it on 3 machines you need to procure a volume license.
Regards,
Rave

Cucm Pub and Sub in different network

Can we have CUCM 10.5 publisher and subscriber in different subnets ?

Yes, as long as there is connectivity, if this is a WAN, make sure enough BW is there.

Swap roles Pub to Sub and Vica Versa

Hey Guys
Is there a way to swap roles between two CUCM servers in a single cluster?
Pub to Sub and Sub to pub
Could you just do a physical move of the VMs and then re-IP them?
Any idea appreciated, cheers Mike

Supported Features of VMware vSphere ESXi, VMware vCenter and VMware vSphere Client
http://docwiki.cisco.com/wiki/Unified_Communications_VMware_Requirements#Supported_Features_of_VMware_vSphere_ESXi.2C_VMware_vCenter_and_VMware_vSphere_Client
Read the above about moving VMs between hosts.
And yes, you can change the hostname and the IP of the servers, but that won't affect their role as Deji already mentioned.
Follow the guide on how to change IP/hostname available on CCO for your CUCM version.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

Email and sub acounts

Is there any way I can move my email and sub accounts over to my verizon business accounts?

Yes, depending on your services you'll need either a "repoint" or a "scrub." You will have to contact Verizon's tech support to get it done though. They have options available on their Contact Us page.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having."

Apple Macbook 13.3" Laptop-Black 2008 2.4GHz Intel Core 2 Duo will not boot up and instead I get a grey screen with a folder and a question mark over it.

My Apple Macbook 13.3" Laptop-Black 2008 2.4GHz Intel Core 2 Duo will not boot up and instead I get a grey screen with a folder and a question mark over it. I've tried Option key, and Control S keys and it still will not boop up. Can anyone help?

If you are running Snow Leopard:
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
If you are running Lion or later:
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it isthree times faster than wireless.

Jsp code (js code) to display(tree) the files and sub folders in a folder

Hi all
plz can any one send me the source in jsp or js to display in tree structure for files and sub folders in a folder.

There are dozens of Javascript tree widgets available on the Internet. Some are free. Some are good. Google will find them for you.
(The only relevance of JSP to your question is that yes, you can generate HTML that uses one of those Javascript tree widgets.)

Current list of all SAP modules and sub-modules

Can anyone point me to a current and comprehensive list of all available SAP modules and sub-modules? Currently, the best source I have found for this list is SAPNote 36677, which lists all the structure of components for customer incidents. However, this SAPNote list is over 23K line items and includes information outside of the modules and sub-modules, in a format that is difficult to normalize.

Eric,
a similar question was posted in this link: http://scn.sap.com/thread/3652322
Assuming you are looking for an overview on the modules for the SAP Business Suite, personally I like the list in the SAP help
Also a valuable resource is the SAP Release Strategy webpage, which provides link to the Solution Explorer, which shows the available modules by LoB Line of Business or Industry solution, and the official Product List called PAM Product Availability Matrix, which is pretty technical.
thank you
erich

How to find out how many items within folder (and sub folders)?

Hi all,
This may be a silly question - but if I have a folder (containing sub folders etc) is there a way to calculate how many file items are within this folder?
I cant seem to do it using the info panel. And the standard view tells you how many file items are within the folder you are looking at, but not in the sub and sub sub folders etc.
Thanks for any help!
Paul

or maybe
SuperGetInfo
http://www.barebones.com/products/super/index.shtml

Business Process and sub Process IN ERM and CUP

Hi Friends,
We are in intial stage of GRC implimentation. Now I am uploading the roles into ERM and CUP. I have defined business processes and sub processes for the roles and upload the roles successfully in ERM. But when I am doing the same excercise in CUP especially during creation of sub process it is not allowing the charecter "-" in the name space.
E.g. Business process name is EHS-SM (Uploaded to CUP)
Sub process name is EHS-SM1.1 (not allowing to create in CUP wher as successfully created in ERM)
My question is
1. why it allows me to do the same thing in ERM but not in CUP.
2. Is there any way to maintain the name with chaecter "-".
For your information I am in the phase of defining the attributes for the roles.
Thanks & Regards,
Satyabrat
Edited by: Sunil Varghese on Oct 28, 2009 10:59 AM
Edited by: Sunil Varghese on Oct 28, 2009 11:01 AM

Hi all,
I will have a hard time ahead with BP and SBP. all are in the same format. I dont think my company will agree to change the name of there BP or SBP because they are thousands in count and also there is no other way around in GRC,
Let give me a try...
Thanks Guys for your support and time.

Report Optimization and Sub Reports

Post Author: olaszb
CA Forum: Crystal Reports
Hello,I am currently working with Crystal Reports XI Release 2 and have questions about optimization. We have a dataset (.NET) generated from Oracle and then passed to Crystal. For our largest report it is taking 15 seconds for the dataset to be generated, but over 3 minuets for Crystal to generate the report. We have 14 sub reports within this report. I'm pretty certain this is the bottle neck.Any sub report optimization suggestions? Would arrays be the way to go instead?

Post Author: olaszb
CA Forum: Crystal Reports
I went through the report and suppressed all sub reports and this cut the time down by 1/3 but still too slow. On our largest report we are getting 376 pages and with the sub reports suppressed there are 263 pages returned. Does anyone know if still goes through/caches the info of a sub report even if the report is suppressed?

How to inherit roles between root organization unit and sub units

Hi all,
I have root organization unit and sub units:
->Company
>Department 1
>Department 2
>Department 3
>Department 4
>Department 5
I would like it to work like this that all people from all departments would have access to transaction ZTEST. Most obvious way would be for me to assign appropriate role to unit Company. Unfortunately it looks like roles are not inherit between units like this. So question is how it should be done? Do I have to assign this role to all departments to make it work?
Best regards
Marcin Cholewczuk

Hi,
To activate inheritance of roles between root org and sub org units, you need to set switch HR_ORG_ACTIVE to Yes in table PRGN_CUST. Also proper evaluation path has to be used so that user comparison (via PFUD) creates the indirect role assignment to user master records.
You can modify evaluation path US_ACTGR in table T77AW/ tcode OOAW to include root org and its subunits (add entry for relationship O B002 O) and connect the role assigned to root org to the users belonging to sub org units. Then run PFUD which will use this evaluation path to create indirect role assigment.
Thanks
Sandipan

Pub and Sub question

Similar Messages

Maybe you are looking for